scholarly journals Image Compression for Telemedicine using New Wavelets and Modified EZW

With the invent of better signal processing operations unveiled by the research community of both communication and signal processing, the Telemedicine is becoming more and more prominent all over the world. Communicating the data captured from the patient to the clinicians in non-recognizable seconds of time is crucial in many cases so as to take a right decision at right time. Then the processing of the data sent to clinicians is the second part of telemedicine where extensive processing capabilities are required. In this paper, the first part of telemedicine is answered by devising diversified schemes using wavelet and modification of standard coding scheme embedded zero tree wavelet (EZW). First, coding by EZW and Set partitioning in Hierarchical tree (SPIHT) was implemented. Then, new wavelets and their lifting versions are designed. Finally, two variations of standard EZW scheme were proposed. The simulation results suggest that the techniques presented in this paper provide better compression performance at different levels of compression ratio (CR) and peak signal to noise ratio (PSNR). In addition to CR and PSNR, bit error rate and output bandwidths are calculated.

Author(s):  
Aseel Addawood

The COVID-19 pandemic spread of the coronavirus across the globe has affected our lives on many different levels. The world we knew before the spread of the virus has become another one. Every country has taken preventive measures, including social distancing, travel restrictions, and curfew, to control the spread of the disease. With these measures implemented, people have shifted to social media platforms in the online sphere, such as Twitter, to maintain connections. In this paper, we describe a coronavirus data set of Arabic tweets collected from January 1, 2020, primarily from hashtags populated from Saudi Arabia. This data set is available to the research community to glean a better understanding of the societal, economical, and political effects of the outbreak and to help policy makers make better decisions for fighting this epidemic.


2018 ◽  
Vol 16 (1) ◽  
pp. 112-119
Author(s):  
VLADIMIR GLEB NAYDONOV

The article considers the students’ tolerance as a spectrum of personal manifestations of respect, acceptance and correct understanding of the rich diversity of cultures of the world, values of others’ personality. The purpose of the study is to investgate education and the formation of tolerance among the students. We have compiled a training program to improve the level of tolerance for interethnic differences. Based on the statistical analysis of the data obtained, the most important values that are significant for different levels of tolerance were identified.


Author(s):  
Natacha Frachon ◽  
Martin Gardner ◽  
David Rae

Botanic gardens, with their large holdings of living plants collected from around the world, are important guardians of plant biodiversity, but acquiring and curating these genetic resources is enormously expensive. For these reasons it is crucial that botanic gardens document and curate their collections in order to gain the greatest benefit from the plants in their care. Great priority is given to making detailed field notes and the process of documentation is often continued during the plants formative years when being propagated. However, for the large majority of plants this process often stops once the material is planted in its final garden location. The Data Capture Project at the Royal Botanic Garden Edinburgh is an attempt to document specific aspects of the plant collections so that the information captured can be of use to the research community even after the plants have died.


Author(s):  
Mohammad Paydar ◽  
Asal Kamani Fard

More than 150 cities around the world have expanded emergency cycling and walking infrastructure to increase their resilience in the face of the COVID 19 pandemic. This tendency toward walking has led it to becoming the predominant daily mode of transport that also contributes to significant changes in the relationships between the hierarchy of walking needs and walking behaviour. These changes need to be addressed in order to increase the resilience of walking environments in the face of such a pandemic. This study was designed as a theoretical and empirical literature review seeking to improve the walking behaviour in relation to the hierarchy of walking needs within the current context of COVID-19. Accordingly, the interrelationship between the main aspects relating to walking-in the context of the pandemic- and the different levels in the hierarchy of walking needs were discussed. Results are presented in five sections of “density, crowding and stress during walking”, “sense of comfort/discomfort and stress in regard to crowded spaces during walking experiences”, “crowded spaces as insecure public spaces and the contribution of the type of urban configuration”, “role of motivational/restorative factors during walking trips to reduce the overload of stress and improve mental health”, and “urban design interventions on arrangement of visual sequences during walking”.


2021 ◽  
Vol 21 (1) ◽  
pp. 1-20
Author(s):  
A. K. Singh ◽  
S. Thakur ◽  
Alireza Jolfaei ◽  
Gautam Srivastava ◽  
MD. Elhoseny ◽  
...  

Recently, due to the increase in popularity of the Internet, the problem of digital data security over the Internet is increasing at a phenomenal rate. Watermarking is used for various notable applications to secure digital data from unauthorized individuals. To achieve this, in this article, we propose a joint encryption then-compression based watermarking technique for digital document security. This technique offers a tool for confidentiality, copyright protection, and strong compression performance of the system. The proposed method involves three major steps as follows: (1) embedding of multiple watermarks through non-sub-sampled contourlet transform, redundant discrete wavelet transform, and singular value decomposition; (2) encryption and compression via SHA-256 and Lempel Ziv Welch (LZW), respectively; and (3) extraction/recovery of multiple watermarks from the possibly distorted cover image. The performance estimations are carried out on various images at different attacks, and the efficiency of the system is determined in terms of peak signal-to-noise ratio (PSNR) and normalized correlation (NC), structural similarity index measure (SSIM), number of changing pixel rate (NPCR), unified averaged changed intensity (UACI), and compression ratio (CR). Furthermore, the comparative analysis of the proposed system with similar schemes indicates its superiority to them.


Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 2042
Author(s):  
Redha Boubenia ◽  
Patrice Le Moal ◽  
Gilles Bourbon ◽  
Emmanuel Ramasso ◽  
Eric Joseph

The paper deals with a capacitive micromachined ultrasonic transducer (CMUT)-based sensor dedicated to the detection of acoustic emissions from damaged structures. This work aims to explore different ways to improve the signal-to-noise ratio and the sensitivity of such sensors focusing on the design and packaging of the sensor, electrical connections, signal processing, coupling conditions, design of the elementary cells and operating conditions. In the first part, the CMUT-R100 sensor prototype is presented and electromechanically characterized. It is mainly composed of a CMUT-chip manufactured using the MUMPS process, including 40 circular 100 µm radius cells and covering a frequency band from 310 kHz to 420 kHz, and work on the packaging, electrical connections and signal processing allowed the signal-to-noise ratio to be increased from 17 dB to 37 dB. In the second part, the sensitivity of the sensor is studied by considering two contributions: the acoustic-mechanical one is dependent on the coupling conditions of the layered sensor structure and the mechanical-electrical one is dependent on the conversion of the mechanical vibration to electrical charges. The acoustic-mechanical sensitivity is experimentally and numerically addressed highlighting the care to be taken in implementation of the silicon chip in the brass housing. Insertion losses of about 50% are experimentally observed on an acoustic test between unpackaged and packaged silicon chip configurations. The mechanical-electrical sensitivity is analytically described leading to a closed-form amplitude of the detected signal under dynamic excitation. Thus, the influence of geometrical parameters, material properties and operating conditions on sensitivity enhancement is clearly established: such as smaller electrostatic air gap, and larger thickness, Young’s modulus and DC bias voltage.


2020 ◽  
Vol 11 (1) ◽  
pp. 39
Author(s):  
Eric Järpe ◽  
Mattias Weckstén

A new method for musical steganography for the MIDI format is presented. The MIDI standard is a user-friendly music technology protocol that is frequently deployed by composers of different levels of ambition. There is to the author’s knowledge no fully implemented and rigorously specified, publicly available method for MIDI steganography. The goal of this study, however, is to investigate how a novel MIDI steganography algorithm can be implemented by manipulation of the velocity attribute subject to restrictions of capacity and security. Many of today’s MIDI steganography methods—less rigorously described in the literature—fail to be resilient to steganalysis. Traces (such as artefacts in the MIDI code which would not occur by the mere generation of MIDI music: MIDI file size inflation, radical changes in mean absolute error or peak signal-to-noise ratio of certain kinds of MIDI events or even audible effects in the stego MIDI file) that could catch the eye of a scrutinizing steganalyst are side-effects of many current methods described in the literature. This steganalysis resilience is an imperative property of the steganography method. However, by restricting the carrier MIDI files to classical organ and harpsichord pieces, the problem of velocities following the mood of the music can be avoided. The proposed method, called Velody 2, is found to be on par with or better than the cutting edge alternative methods regarding capacity and inflation while still possessing a better resilience against steganalysis. An audibility test was conducted to check that there are no signs of audible traces in the stego MIDI files.


2011 ◽  
Vol 366 (1564) ◽  
pp. 596-610 ◽  
Author(s):  
Benjamin W. Tatler ◽  
Michael F. Land

One of the paradoxes of vision is that the world as it appears to us and the image on the retina at any moment are not much like each other. The visual world seems to be extensive and continuous across time. However, the manner in which we sample the visual environment is neither extensive nor continuous. How does the brain reconcile these differences? Here, we consider existing evidence from both static and dynamic viewing paradigms together with the logical requirements of any representational scheme that would be able to support active behaviour. While static scene viewing paradigms favour extensive, but perhaps abstracted, memory representations, dynamic settings suggest sparser and task-selective representation. We suggest that in dynamic settings where movement within extended environments is required to complete a task, the combination of visual input, egocentric and allocentric representations work together to allow efficient behaviour. The egocentric model serves as a coding scheme in which actions can be planned, but also offers a potential means of providing the perceptual stability that we experience.


Sign in / Sign up

Export Citation Format

Share Document