scholarly journals A Novel Method for Starting of VSC-HVDC System

2021 ◽  
Vol 10 (2) ◽  
pp. 175-180
Author(s):  
G. Vamsi ◽  
◽  
P.Kiran Kumar ◽  
G Joga Rao ◽  
◽  
...  
Keyword(s):  
High Speed ◽  
The Other ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Voltage Source Converters ◽  
Safe Operation ◽  
Hvdc System ◽  
Proper Method ◽  
Novel Method ◽  
Index Terms

The voltage source converters (VSCs) are the circuits, which convert the power from one form to the other. The application of voltage source converter is vital in HVDC systems. The voltage source converter technology is employed for the smooth operation of any HVDC system. Hence, the HVDC systems based on VSC are gaining importance compared to the other HVDC systems. The starting up process of HVDC system is associated with large value of current, so a proper method of starting is required for the safe operation of the HVDC system. In this paper, a new and novel method is proposed for the smooth starting of the VSC based HVDC system, which will limit the current successfully with high speed operation. Index Terms: Nine level MLI, Control of inverter, Modular Inverter.

scholarly journals Reliability Assessment of a Multi-State HVDC System by Combining Markov and Matrix-Based Methods

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3097
Author(s):  
Roberto Benato ◽  
Antonio Chiarelli ◽  
Sebastian Dambone Sessa
Keyword(s):  
Current System ◽  
Estimation Method ◽  
Reliability Estimation ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Hvdc System ◽  
Critical Elements ◽  
The Matrix ◽  
The Impact

The purpose of this paper is to highlight that, in order to assess the availability of different HVDC cable transmission systems, a more detailed characterization of the cable management significantly affects the availability estimation since the cable represents one of the most critical elements of such systems. The analyzed case study consists of a multi-terminal direct current system based on both line commutated converter and voltage source converter technologies in different configurations, whose availability is computed for different transmitted power capacities. For these analyses, the matrix-based reliability estimation method is exploited together with the Monte Carlo approach and the Markov state space one. This paper shows how reliability analysis requires a deep knowledge of the real installation conditions. The impact of these conditions on the reliability evaluation and the involved benefits are also presented.

Real power regulation design for multi-terminal VSC-HVDC systems

2013 ◽  
Vol 3 (2) ◽  
Author(s):  
Guo-Jie Li ◽  
Si-Ye Ruan ◽  
Tek Lie
Keyword(s):  
Control Strategy ◽  
Control Mode ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Real Power ◽  
The Real ◽  
Hvdc System ◽  
High Voltage Direct Current ◽  
Power Regulation ◽  
Regulation Functions

AbstractA multi-terminal voltage-source-converter (VSC) based high voltage direct current (HVDC) system is concerned for its flexibility and reliability. In this study, a control strategy for multiple VSCs is proposed to auto-share the real power variation without changing control mode, which is based on “dc voltage droop” power regulation functions. With the proposed power regulation design, the multiple VSCs automatically share the real power change and the VSC-HVDC system is stable even under loss of any one converter while there is no overloading for any individual converter. Simulation results show that it is effective to balance real power for power disturbance and thus improves operation reliability for the multi-terminal VSC-HVDC system by the proposed control strategy.

scholarly journals Harmonic Modeling of a Diode-Clamped Multilevel Voltage Source Converter for Predicting Uncharacteristic Harmonics

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
Tian Hao Huang ◽  
Kuo Lung Lian
Keyword(s):  
Computation Time ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Voltage Source Converters ◽  
Harmonic Model ◽  
Abcd Matrix ◽  
Truncation Errors ◽  
The Matrix ◽  
Matrix Mapping ◽  
The Time Domain

In response to the growing demand for medium- and high-power trends, multilevel voltage source converters (VSCs) have been attracting growing considerations. One of the widely used VSCs are the diode-clamped multilevel VSC (DCM-VSC). As these converters proliferate, their harmonic impact may become significant. Nevertheless, a harmonic model for the DCM-VSC is currently lacking in the literature. In this paper, the ABCD matrix, mapping the input harmonics to the output harmonics of DCM-VSC, is derived. As the matrix is formulated in the time-domain, the output harmonics are exact and do not suffer from harmonic truncation errors. As the paper will demonstrate, the derived ABCD matrix can be easily applied to a microgrid system and users can easily predict all the uncharacteristic harmonics when a microgrid is subjected to various conditions of imbalance. In addition to all the results being validated with those of PSCAD/EMTDC, the computation time of the proposed method is in contrast much shorter.

scholarly journals Research on Serial VSC-LCC Hybrid HVdc Control Strategy and Filter Design Scheme

Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2260
Author(s):  
Fan Cheng ◽  
Lijun Xie ◽  
Zhibing Wang
Keyword(s):  
Reactive Power ◽  
Filter Design ◽  
Control Strategies ◽  
Short Circuit ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Level Control ◽  
Hvdc System ◽  
High Voltage Direct Current ◽  
Design Scheme

This paper investigated the characteristics of a novel type of hybrid high voltage direct current (HVdc) converter, which is composed by line commutated converter series with voltage source converter. The system and valve level control strategies are introduced, which can provide ac system voltage support. A novel filter design scheme composed by resonant filers for hybrid HVdc are also proposed, which can decrease the capacity of reactive power compensation equipment without deteriorate harmonic characteristics. The ac voltage of HVdc fluctuation level caused by transmitted power variation will be effectively reduced, with the coordination between filter design scheme and converter control. In addition, the influence of ac grid strength is also analyzed by equivalent source internal impedance represented by short circuit ratio (SCR). Finally, the +800 kV/1600 MW hybrid HVdc system connecting two ac grids under different SCR cases are studied, and the PSCAD/EMTDC simulation results have validated the effectiveness for proposed strategy.

scholarly journals A Selective Fault Clearing Scheme for a Hybrid VSC-LCC Multi-Terminal HVdc System

Energies ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3554
Author(s):  
Naushath M. Haleem ◽  
Athula D. Rajapakse ◽  
Aniruddha M. Gole ◽  
Ioni T. Fernando
Keyword(s):  
High Capacity ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Circuit Breakers ◽  
Hvdc System ◽  
Hvdc Transmission ◽  
High Voltage Direct Current ◽  
Clearing Functions ◽  
Transmission Structure ◽  
The Impact

A selective fault clearing scheme is proposed for a hybrid voltage source converter (VSC)-line commutated converter (LCC) multi-terminal high voltage direct current (HVdc) transmission structure in which two small capacity VSC stations tap into the main transmission line of a high capacity LCC-HVdc link. The use of dc circuit breakers (dc CBs) on the branches connecting to VSCs at the tapping points is explored to minimize the impact of tapping on the reliability of the main LCC link. This arrangement allows clearing of temporary faults on the main LCC line as usual by force retardation of the LCC rectifier. The faults on the branches connecting to VSC stations can be cleared by blocking insulated gate bipolar transistors (IGBTs) and opening ac circuit breakers (ac CB), without affecting the main line’s performance. A local voltage and current measurement based fault discrimination scheme is developed to identify the faulted sections and pole(s), and trigger appropriate fault recovery functions. This fault discrimination scheme is capable of detecting and discriminating short circuits and high resistances faults in any branch well before 2 ms. For the test grid considered, 6 kA, 2 ms dc CBs can easily facilitate the intended fault clearing functions and maintain the power transfer through healthy pole during single-pole faults.

A Fault Diagnosis Method in VSC-HVDC Simulation System Based on BRBP Neural Networks

2013 ◽  
Vol 860-863 ◽  
pp. 2269-2274
Author(s):  
Hao Yang Cui ◽  
Yong Peng Xu ◽  
Jun Jie Yang ◽  
Jun Dong Zeng ◽  
Zhong Tang
Keyword(s):  
Neural Networks ◽  
Fault Diagnosis ◽  
Back Propagation ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Hvdc System ◽  
High Voltage Direct Current ◽  
Current Transmission ◽  
Diagnosis Method ◽  
Dc Current

As the feature of faulty signal in high voltage direct current transmission technology based on voltage source converter (VSC-HVDC) system is complicated to extract and its difficult to carry on the fault diagnosis. On the basis of the PSCAD simulation model of VSC-HVDC system, the DC current faulty signal is analyzed. Then, the wavelet analysis method was adopted to extract the eigenvector of faulty signal, and combined with method of Bayesian regularization back-propagation (BRBP) neural networks, the system fault was identified. The simulation results show that the method is more efficiently and more rapidly than the adding momentum BP neural network on the VSC-HVDC system faults diagnosing.

scholarly journals Vector Control of VSC HVDC System under Single Line to Ground Fault Condition

2018 ◽  
Vol 7 (1) ◽  
pp. 59
Author(s):  
Prabodha Kumar Rath ◽  
Kanhu Charan Bhuyan
Keyword(s):  
Vector Control ◽  
Reactive Power ◽  
Control Method ◽  
System Stability ◽  
Control Technique ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Control Loop ◽  
Hvdc System ◽  
Ground Fault

<span lang="EN-US">This paper proposes a model of a VSC (voltage source converter) based Back to Back HVDC system and its control technique under fault condition. From the mathematical model of the system relationship between the controlling and the controlled variables is determined to control the system parameters. An appropriate vector control technique is used to control active and reactive power and to maintain DC link voltage. The proposed controlling unit consists of outer control loop and inner control loop which effectively damped out the system oscillation and maintains the system stability. The validity of the model and the feasibility of the control method have been proved by the simulation results. In this paper the system performance is studied under fault condition is studied.</span>

Sign in / Sign up

Export Citation Format

Share Document