scholarly journals Influence of Process Parameters on Tensile Strength of Additive Manufactured PLA Parts using Taguchi Method

2019 ◽  
Vol 8 (3) ◽  
pp. 7635-7639
Keyword(s):  
Tensile Strength ◽  
Layer Thickness ◽  
Fused Deposition Modeling ◽  
Optimal Parameter ◽  
Fused Filament Fabrication ◽  
Influence Of Process Parameters ◽  
Layer Height ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Nozzle Temperature

Influence of layer thickness nozzle temperature and angle on tensile strength of PLA fabricated with FDM (FFF) was experimentally investigated. Polylactic Acid (PLA) is a semi-crystalline and bio-friendly thermoplastic polymer has identified as important material in different applications due to its mechanical characteristics. Fused Deposition Modeling (FDM) is a one of the proved technology in Fused Filament Fabrication (FFF) technique in additive manufacturing process. In present investigation different specimens were fabricated using FDM technique with different layer height and different layer angles for finding influence of these manufacturing parameters on tensile strength of the specimen. Specimens were fabricated and tested as per ASTM D638 standard. It is clearly observed that tensile strength is more for +450 /-450 layer angle than the +00 /-0 0 layer angle for a given layer height(h=0.10 mm, h=0.15mm and h=0.20mm).The TAGUCHI analysis is carried with nozzle temperature, layer thickness and angle finding optimal values. It has been observed that, the optimal parameter is angle, which is equal to 30 0 .the ANOVA variation of angle layer with tensile strength has been observed that 18.10-31.90.

Improvement in Tensile Strength of FDM Built Parts by Parametric Control

2014 ◽  
Vol 592-594 ◽  
pp. 1075-1079 ◽  
Author(s):  
Swayam Bikash Mishra ◽  
Siba Sankar Mahapatra
Keyword(s):  
Tensile Strength ◽  
Process Parameters ◽  
Fused Deposition Modeling ◽  
Optimal Parameter ◽  
Layer By Layer ◽  
3D Objects ◽  
Fused Deposition ◽  
Solid Models ◽  
Raster Angle ◽  
Deposition Modeling

Fused Deposition Modeling (FDM) is one of the efficient rapid prototyping (RP) technologies that forms 3D objects by adding material layer by layer from CAD generated solid models. However, the FDM built part is hardly anisotropic in nature due to layer-by-layer build mechanism. Literature suggests that mechanical property, especially tensile strength, of FDM built part is severely affected by process parameters. Among all the parameters, contour number happens to be an important parameter because it reduces stress concentration resulting in avoidance of premature breakdown. Therefore, in this work contour number along with five important process parameters such as layer thickness, raster width, part orientation, raster angle and air gap are considered and their effect on tensile strength of FDM built parts is studied. Experiments are conducted using Face Centred Central Composite Design (FCCCD) in order to reduce the experimental runs. An optimal parameter setting has been suggested for the maximisation of tensile strength of the FDM built parts.

scholarly journals Preparation and Evaluation of the Tensile Characteristics of Carbon Fiber Rod Reinforced 3D Printed Thermoplastic Composites

2020 ◽  
Vol 5 (1) ◽  
pp. 8
Author(s):  
Arivazhagan Selvam ◽  
Suresh Mayilswamy ◽  
Ruban Whenish ◽  
Rajkumar Velu ◽  
Bharath Subramanian
Keyword(s):  
Tensile Strength ◽  
Carbon Fiber ◽  
Layer Thickness ◽  
Shell Thickness ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Thermoplastic Composites ◽  
Critical Parameters ◽  
Fused Deposition ◽  
Deposition Modeling

The most common method to fabricate both simple and complex structures in the additive manufacturing process is fused deposition modeling (FDM). Many researchers have studied the strengthening of FDM components by adding short carbon fibers (CF) or by reinforcing solid carbon fiber rods. In the current research, we sought to enhance the mechanical properties of FDM components by adding bioinspired solid CF rods during the fabrication process. An effective bonding interface of bioinspired CF rods and polylactic acid (PLA) was achieved by triangular interlocking sutures and by employing synthetic glue as the binding agent. In particular, the tensile strength of solid CF rod reinforced PLA samples was studied. Critical parameters such as layer thickness, extruder temperature, extruder speed, and shell thickness were considered for optimization. Significant process parameters were identified through leverage plots using the response surface methodology (RSM). The optimum parameters were found to be layer thickness of 0.04 mm, extruder temperature of 215 °C, extruder speed of 60 mm/s, and shell thickness of 1.2 mm. The results revealed that the bioinspired solid CF rod reinforced PLA (CFRPLA) composite exhibited a tensile strength of 82.06 MPa, which was approximately three times higher than the pure PLA (28 MPa, 66% lower than CFRPLA), acrylonitrile butadiene styrene (ABS) (28 MPa, 66% lower than CFRPLA), polyethylene terephthalate glycol (PETG) (34 MPa, 60% lower than CFRPLA), and nylon (34 MPa, 60% lower than CFRPLA) samples.

scholarly journals The influence of layer height on the tensile strength of specimens printed in the FDM technology

2021 ◽  
Vol 24 (1) ◽  
Author(s):  
Łukasz Miazio
Keyword(s):  
Tensile Strength ◽  
Fused Deposition Modeling ◽  
Breaking Force ◽  
Layer Height ◽  
Fused Deposition ◽  
Deposition Modeling

This article analyzes the influence of layer height on the tensile strength of PLA specimens printed in the Fused Deposition Modeling (FDM) technology. The maximum breaking force of specimens with 30% and 100% infill density was determined at layer height of 0.05 mm, 0.1 mm, 0.2 mm and 0.3 mm. In the case of 30% infill, the highest value of the force was obtained for a layer with a height of 0.05 mm (which corresponds to 22.7 MPa), and for a 100% infill for a layer of 0.2 (which corresponds to 40 MPa). Over this layer height of 0.2 mm is the most polyoptimal due to the time prints and strength (which corresponds to 19.7 MPa).

scholarly journals Effect of the filling percentage on tensile strength in 3D desktop printing for different printing patterns, using a randomized design of experiments

Enfoque UTE ◽  
2019 ◽  
Vol 10 (4) ◽  
pp. 13-27
Author(s):  
Juan Carlos Parra Mena ◽  
Erling Ricardo Gallardo Vizuete ◽  
Erick Damian Torres Peñaloza
Keyword(s):  
Tensile Strength ◽  
Design Of Experiments ◽  
Polylactic Acid ◽  
Fused Deposition Modeling ◽  
Single Factor ◽  
Fused Filament Fabrication ◽  
Fused Deposition ◽  
Randomized Design ◽  
Filling Pattern ◽  
Deposition Modeling

The evaluation of the tensile strength of printed parts by means of fused deposition modeling (FDM) or fused filament fabrication (FFF) is essential, since parts whose resistance does not differ significantly depending on the percentage of filling used can be obtained, optimizing the use of the material. The present work details the analysis of polylactic acid (PLA) specimens manufactured according to ASTM D 638 with different percentages for the most commonly used filling patterns (Honeycomb, Octagram, Stars, Archimedean, Hilbert and Triangles). With the help of an analysis of variance and a design of experiments with a single factor, the appropriate percentages for printing parts according to the desired filling pattern are obtained.

scholarly journals Prediction of tensile strength of fused deposition modeling (FDM) printed PLA using classic laminate theory

2022 ◽  
Vol 10 (1) ◽  
pp. 13-24 ◽  
Author(s):  
Shilpesh R. Rajpurohit ◽  
Harshit K. Dave ◽  
Kamlakar P. Rajurkar
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Fused Deposition Modeling ◽  
Constitutive Models ◽  
Limited Information ◽  
Layer Height ◽  
Fused Deposition ◽  
Raster Angle ◽  
Laminate Theory ◽  
Deposition Modeling

The application of Fused Deposition Modeling (FDM) is restricted due to limited information about the mechanical properties of printed parts. Therefore, it is required to determine the mechanical properties of the FDM properties to avail the full benefit of the FDM process. In the present study, Classic Laminate Theory (CLT) has been employed at the different configurations of layer thickness and raster width. The required elastic constant of material for CLT has been experimentally obtained through FDM printed Polylactic Acid (PLA) unidirectional specimens at 0°, 45° and 90° for different combinations of layer height and raster width. For these different combinations of layer height and raster width, constitutive models were developed to predict the tensile properties of the PLA parts. Tensile strength of the FDM printed bi-directional specimens has been experimentally obtained to validate the proposed CLT model results. The experimental tensile strength data is in good agreement with the data predicted by the proposed CLT model. Higher tensile strength and modulus were achieved with 0° raster angle compared to 90° raster angle. In the case of a bi-directional printed specimen, higher tensile strength was obtained with 45°/-45° raster angle followed by 30°/-60° and 0°/90° raster angle.

Linear model analysis of fused deposition modeling process parameters for obtaining the maximum tensile strength in acrylonitrile butadiene styrene (ABS) and carbon fiber polylactic acid (PLA) materials

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Debashis Mishra ◽  
Anil Kumar Das
Keyword(s):  
Tensile Strength ◽  
Carbon Fiber ◽  
Layer Thickness ◽  
Process Parameters ◽  
Fused Deposition Modeling ◽  
Thermoplastic Material ◽  
Content Type ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Printing Speed

PurposeThe purpose of the experimental investigation was to optimize the process parameters of the fused deposition modeling (FDM) technique. The optimization of the process was performed to identify the relationship between the chosen factors and the tensile strength of acrylonitrile butadiene styrene (ABS) and carbon fiber polylactic acid (PLA) thermoplastic material, FDM printed specimens. The relationship was demonstrated by using the linear experimental model analysis, and a prediction expression was established. The developed prediction expression can be used for the prediction of tensile strength of selected thermoplastic materials at a 95% confidence level.Design/methodology/approachThe Taguchi L9 experimental methodology was used to plan the total number of experiments to be performed. The process parameters were chosen as three at three working levels. The working range of chosen factors was the printing speed (60, 80 and 100mm/min), 40%, 60% and 80% as the infill density and 0.1mm, 0.2mm and 0.3mm as the layer thickness. The fused deposition modeling process parameters were optimized to get the maximum tensile strength in FDM printed ABS and carbon fiber PLA thermoplastic material specimens.FindingsThe optimum condition was achieved by the process optimization, and the desired results were obtained. The maximum desirability was achieved as 0.98 (98%) for the factors, printing speed 100mm/min, infill density 60mm and layer thickness 0.3mm. The strength of the ABS specimen was predicted to be 23.83MPa. The observed strength value was 23.66MPa. The maximum desirability was obtained as 1 (100%) for the factors, printing speed 100mm/min, infill density 60mm and layer thickness 0.2mm. The strength of the carbon fiber PLA specimen was predicted to be 26.23MPa, and the obtained value was 26.49MPa.Research limitations/implicationsThe research shows the useful process parameters and their suitable working conditions to print the tensile specimens of the ABS and carbon fiber PLA thermoplastics by using the fused deposition modeling technique. The process was optimized to identify the most influential factor, and the desired optimum condition was achieved at which the maximum tensile strength was reported. The produced prediction expression can be used to predict the tensile strength of ABS and carbon fiber PLA filaments.Practical implicationsThe results obtained from the experimental investigation are useful to get an insight into the FDM process and working limits to print the parts by using the ABS and carbon fiber PLA material for various industrial and structural applications.Social implicationsThe results will be useful in choosing the suitable thermoplastic filament for the various prototyping and structural applications. The products that require freedom in design and are difficult to produce by most of the conventional techniques can be produced at low cost and in less time by the fused deposition modeling technique.Originality/valueThe process optimization shows the practical exposures to state an optimum working condition to print the ABS and carbon fiber PLA tensile specimens by using the FDM technique. The carbon fiber PLA shows better strength than ABS thermoplastic material.

On improving the surface finish of 3D printing polylactic acid parts by corundum blasting

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ana Pilar Valerga Puerta ◽  
J.D. Lopez-Castro ◽  
Adrián Ojeda López ◽  
Severo Raúl Fernández Vidal
Keyword(s):  
Layer Thickness ◽  
Polylactic Acid ◽  
Surface Quality ◽  
Fused Deposition Modeling ◽  
Fused Filament Fabrication ◽  
High Exposure ◽  
Content Type ◽  
Fused Deposition ◽  
Deposition Modeling

Purpose Fused filament fabrication or fused deposition modeling (FFF/FDM) has as one of its main restrictions the surface quality intrinsic to the process, especially linked to the layer thickness used during manufacture. The purpose of this paper is to study the possibility of improving the surface quality of polylactic acid (PLA) parts manufactured by FFF using the shot blasting technique. Design/methodology/approach The influence of corundum blasting on 0.2 mm layer thickness FDM PLA parts treated with two sizes of abrasive, different exposure times and different incidence pressures. Findings As a result, improvements of almost 80% were obtained in the surface roughness of the pieces with high exposure times, and more than 50% in just 20 s. Originality/value This technique is cheap, versatile and adaptable to different part sizes and geometries. Furthermore, it is a fast and environmentally friendly technique compared to conventional machining or vapor smoothing. Despite this, no previous studies have been carried out to improve the quality of this technology.

scholarly journals Research on the Fused Deposition Modeling of Polyether Ether Ketone

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2344
Author(s):  
Ruoxiang Gao ◽  
Jun Xie ◽  
Jinghui Yang ◽  
Chaojie Zhuo ◽  
Jianzhong Fu ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Fused Deposition Modeling ◽  
Fused Deposition ◽  
Polyether Ether Ketone ◽  
Raster Angle ◽  
Deposition Modeling ◽  
Ether Ketone ◽  
Nozzle Temperature ◽  
Warpage Deformation ◽  
Printing Speed

As a special engineering polymer, polyether ether ketone (PEEK) has been used widely due to its excellent mechanical properties, high thermal stability, and chemical resistance. Fused deposition modeling (FDM) is a promising process for fabricating PEEK parts. However, due to the semi-crystalline property and high melting point of PEEK, determining appropriate process parameters is important to reduce warpage deformation and improve the mechanical properties of PEEK. In this article, the influence of raster angle and infill density was determined by single factor experiment, which are the two most important parameters. The results showed that samples with 0°/90° raster angle and 50% infill density had the best comprehensive properties in terms of warpage deformation, tensile strength, and specific strength. Subsequently, based on the results above, the effects of printing speed, nozzle temperature, platform temperature, raster width, and layer thickness were analyzed by orthogonal experiment. The results indicated that platform temperature had the greatest impact on warpage deformation while printing speed and nozzle temperature were significant parameters on tensile strength. Through optimization, warpage deformation of the samples could be reduced to almost 0 and tensile strength could increase by 19.6% (from 40.56 to 48.50 MPa). This will support the development of FDM for PEEK.

The Influence of an Infill Density, Percent on the Flexural Strength of the 3D

2020 ◽  
Vol 870 ◽  
pp. 73-80
Author(s):  
Nuha Hadi Jasim Al Hasan
Keyword(s):  
Tensile Strength ◽  
3D Printing ◽  
Flexural Strength ◽  
Layer Thickness ◽  
Polylactic Acid ◽  
Fused Deposition Modeling ◽  
Bending Test ◽  
Layer By Layer ◽  
Fused Deposition ◽  
Deposition Modeling

3D printing innovation, as a quick prototyping, utilize plastic or metal as the crude material to print the genuine parts layer by layer. In this way, it is likewise called added substance producing procedure. Contrasted and conventional assembling innovation, 3D printing innovation has evident points of interest in assembling items with complex shapes and structures. Fused deposition modeling (FDM) is one of the most broadly utilized 3D printing advances. Fibers of thermoplastic materials, for example, polylactic acid is for the most part utilized as crude materials. The present examination will concentrate on the effect of the infill density, percent on the flexural strength of polylactic acid. Bending test was performed on different infill density, percent of specimens. According to ASTM D638.14 standards, samples for testing are made in different infill density, percent (20, 30, 40, 50 and 60 %) by using a polylactic acid in 3D machine printing and their tensile tested and the parameters include different fill density, layer high of 0.1 mm , 0.2mm and 0.3 have an effect on the mechanical characterized while the time of printing the sample would be increased with increasing of fill density%. The tensile strength of polylactic acid samples was found at different fill density and a layer thickness. According to test measuring results that the tensile strength, maximum 47.1,47.4, and 48 MPa at 30%,40%,and 50% fill density respectively and 0.1mm height layer and the tensile strength minimum at 60% and 70 % fill density and 0.1 mm height layer thickness. The higher strength results as higher layer thickness 0.3 mm as compared with 0.1 and 0.2 at 30%fill density.

The Influence of Layer Thickness on Mechanical Properties of the 3D Printed ABS Polymer by Fused Deposition Modeling

2016 ◽  
Vol 706 ◽  
pp. 63-67 ◽  
Author(s):  
Pritish Shubham ◽  
Arnab Sikidar ◽  
Teg Chand
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Strength ◽  
Injection Molding ◽  
Layer Thickness ◽  
Fused Deposition Modeling ◽  
Molding Method ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
3D Printed

3D Printed ABS polymer samples were investigated for understanding the effect of layer thickness on the various mechanical properties of the component. Standard samples with varying layer thickness were prepared by 3D printing machine which works on the principle of Fused Deposition modeling (FDM) method and compared with sample prepared by standard injection molding method. Results show that tensile strength (36 MPa), impact strength (103.6 J/m) and hardness (R107) were highest for the samples made by injection molding method. Furthermore, among 3D printed samples, properties were better with smaller layer thickness. With increase in layer thickness, there was negative effect on mechanical properties as tensile strength, impact strength and hardness decreased. Exception with hardness of 3D printed ABS samples was found; for largest layer thickness hardness further increased instead of decreasing.

Sign in / Sign up

Export Citation Format

Share Document