scholarly journals Torsional Strength Determination of Ferrocement U-Wraps RC Beams with using Different Methods

2020 ◽  
Vol 8 (5) ◽  
pp. 4017-4023
Keyword(s):  
Single Equation ◽  
Experimental Program ◽  
Rc Beams ◽  
Time Saving ◽  
Torsional Strength ◽  
Truss Model ◽  
Soft Computing Method ◽  
Strength Determination ◽  
Computing Method

Retrofitting of distressed structures is a major concern worldwide for researchers particularly against torsion. Determination of torsional strength of retrofitted RC beams “U” wraps is again a difficult task. The experimental program is taken up with 30 rectangular beams tested under pure torsion. Torque of such a “U” wrapped RC beam with other dimension and material cannot be derived from these experimental results. To compute the same; analytical method based on softened truss model of Hsu is employed with modification on material properties. Both experimental and analytical methods are unable to provide a single equation to quantify the torsional strength. To overcome the same, soft computing method MARS and WASPAS method is employed in the present investigation. The methods are easy and time saving.

Eco-friendly spectrophotometric methods for assessment of alfuzosin and solifenacin in their new pharmaceutical formulation; Green profile evaluation via eco-scale and GAPI tools

2020 ◽  
Vol 16 ◽  
Author(s):  
Mamdouh R. Rezk ◽  
Mina Wadie ◽  
Soheir A. Weshahy ◽  
Mahmoud A. Tantawy
Keyword(s):  
Minor Component ◽  
Time Saving ◽  
Prostate Hyperplasia ◽  
Spectrophotometric Methods ◽  
Ratio Difference ◽  
Ich Guidelines ◽  
Mean Centering ◽  
Benign Prostate ◽  
Urological Diseases

Background: Alfuzosin is recently co-formulated with solifenacin for relieving two coincident urological diseases, namely; benign prostate hyperplasia and overactive bladder Objective: Herein, green, simple and rapid spectrophotometric methods were firstly developed for simultaneous determination of the two cited drugs in their co-formulated pharmaceutical capsule Methods: Alfuzosin, which is the major component in the dosage form, was directly assayed at its extended wavelength at 330.0 nm. The challenging spectrum of the minor component, solifenacin, was resolved by five spectrophotometric methods, namely; dual wavelength (DW) at 210.0 & 230.0 nm, first derivative (1D) at 222.0 nm, ratio difference (RD) at 217.0 - 271.0 nm , derivative ratio (1DD) at 223.0 and mean centering of ratio spectra (MC) at 217.0 nm Results: The Proposed methods were successfully validated as per ICH guidelines. Alfuzosin showed linearity over the range of 4.0 - 70.0 μg/mL, while that of solifenacin were 4.0 - 50.0 μg/mL for DW, 2.0 - 70.0 μg/mL for 1D and RD methods, 1.0 - 70.0 μg/mL for 1DD and 4.0 - 70.0 μg/mL for MC method. Statistical comparison with their official ones showed no noticeable differences. The methods showed good applicability for assaying drugs in their newly combination. Besides eco-scale, the greenness profile of the methods was assessed and compared with the reported spectrophotometric one via the newest metric tool; green analytical procedure index (GAPI). Conclusions: The proposed methods are superior in not only being smart, accurate, selective, robust and time-saving, but also in using distilled water as an eco-friendly and cheap solvent

scholarly journals A Toolbox for the Determination of Nitroaromatic Explosives in Marine Water, Sediment, and Biota Samples on Femtogram Levels by GC-MS/MS

Toxics ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 60
Author(s):  
Tobias Hartwig Bünning ◽  
Jennifer Susanne Strehse ◽  
Ann Christin Hollmann ◽  
Tom Bötticher ◽  
Edmund Maser
Keyword(s):  
Sample Preparation ◽  
Freeze Drying ◽  
Solid Phase ◽  
Phase Extraction ◽  
Direct Extraction ◽  
Time Saving ◽  
Marine Samples ◽  
Volume Method ◽  
Biota Samples

To determine the amount of the explosives 1,3-dinitrobenzene, 2,4-dinitrotoluene, 2,4,6-trinitrotoluene, and its metabolites in marine samples, a toolbox of methods was developed to enhance sample preparation and analysis of various types of marine samples, such as water, sediment, and different kinds of biota. To achieve this, established methods were adapted, improved, and combined. As a result, if explosive concentrations in sediment or mussel samples are greater than 10 ng per g, direct extraction allows for time-saving sample preparation; if concentrations are below 10 ng per g, techniques such as freeze-drying, ultrasonic, and solid-phase extraction can help to detect even picogram amounts. Two different GC-MS/MS methods were developed to enable the detection of these explosives in femtogram per microliter. With a splitless injector, limits of detection (LODs) between 77 and 333 fg/µL could be achieved in only 6.25 min. With the 5 µL programmable temperature vaporization—large volume method (PTV-LVI), LODs between 8 and 47 fg/µL could be achieved in less than 7 min. The detection limits achieved by these methods are among the lowest published to date. Their reliability has been tested and confirmed by measuring large and diverse sample sets.

scholarly journals Flexural Performance of RC Beams Strengthened with Externally-Side Bonded Reinforcement (E-SBR) Technique Using CFRP Composites

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2809
Author(s):  
Md. Akter Hosen ◽  
Fadi Althoey ◽  
Mohd Zamin Jumaat ◽  
U. Johnson Alengaram ◽  
N. H. Ramli Sulong
Keyword(s):  
Absorption Capacity ◽  
Experimental Program ◽  
Rc Beams ◽  
Rc Structures ◽  
Functional Changes ◽  
Flexural Strengthening ◽  
Cfrp Laminates ◽  
Flexural Performance ◽  
Design Loads ◽  
Predicted Values

Reinforced concrete (RC) structures necessitate strengthening for various reasons. These include ageing, deterioration of materials due to environmental effects, trivial initial design and construction, deficiency of maintenance, the advancement of design loads, and functional changes. RC structures strengthening with the carbon fiber reinforced polymer (CFRP) has been used extensively during the last few decades due to their advantages over steel reinforcement. This paper introduces an experimental approach for flexural strengthening of RC beams with Externally-Side Bonded Reinforcement (E-SBR) using CFRP fabrics. The experimental program comprises eight full-scale RC beams tested under a four-point flexural test up to failure. The parameters investigated include the main tensile steel reinforcing ratio and the width of CFRP fabrics. The experimental outcomes show that an increase in the tensile reinforcement ratio and width of the CFRP laminates enhanced the first cracking and ultimate load-bearing capacities of the strengthened beams up to 141 and 174%, respectively, compared to the control beam. The strengthened RC beams exhibited superior energy absorption capacity, stiffness, and ductile response. The comparison of the experimental and predicted values shows that these two are in good agreement.

scholarly journals Determination of Flavonoids Compounds of Three Species and Different Harvesting Periods in Crataegi folium Based on LC-MS/MS

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1602
Author(s):  
Ya-Ping Guo ◽  
Hong Yang ◽  
Ya-Li Wang ◽  
Xiao-Xiang Chen ◽  
Ke Zhang ◽  
...  
Keyword(s):  
Quantitative Analysis ◽  
Qualitative Analysis ◽  
Quantitative Method ◽  
Total Content ◽  
Qualitative And Quantitative Analysis ◽  
Pharmacological Activities ◽  
Time Saving ◽  
Qualitative And Quantitative ◽  
First Time

Crataegi folium have been used as medicinal and food materials worldwide due to its pharmacological activities. Although the leaves of Crataegus songorica (CS), Crataegus altaica (CA) and Crataegus kansuensis (CK) have rich resources in Xinjiang, China, they can not provide insights into edible and medicinal aspects. Few reports are available on the qualitative and quantitative analysis of flavonoids compounds of their leaves. Therefore, it is necessary to develop efficient methods to determine qualitative and quantitative flavonoids compounds in leaves of CS, CA and CK. In the study, 28 unique compounds were identified in CS versus CK by qualitative analysis. The validated quantitative method was employed to determine the content of eight flavonoids of the leaves of CS, CA and CK within 6 min. The total content of eight flavonoids was 7.8–15.1 mg/g, 0.1–9.1 mg/g and 4.8–10.7 mg/g in the leaves of CS, CA and CK respectively. Besides, the best harvesting periods of the three species were from 17th to 26th September for CS, from 30th September to 15th October for CA and CK. The validated and time-saving method was successfully implemented for the analysis of the content of eight flavonoids compounds in CS, CA and CK for the first time.

scholarly journals A new, Modern, COST-Saving micro/macro method for the determination of serum fructosamine

2000 ◽  
Vol 48 (3) ◽  
pp. 285-291 ◽  
Author(s):  
Klára Oppel ◽  
L. Bárdos ◽  
A. Ferencz ◽  
Hajnalka Lakner ◽  
Judit Simon ◽  
...  
Keyword(s):  
Diabetic Control ◽  
Test Tube ◽  
Farm Animals ◽  
Human Blood Plasma ◽  
Plasma Samples ◽  
Time Saving ◽  
Serum Fructosamine ◽  
One Year ◽  
Manual Test

Serum/plasma fructosamine (SeFa) concentration is a reliable indicator used in human diabetic control. Tests for monitoring the carbohydrate/energy metabolism of (farm) animals are less commonly performed in veterinary laboratories, since most of the reliable determinations, both automated and manual, are relatively expensive. The aim of this study was to develop a precise, money- (and time-) saving automated micro method for measuring SeFa. ELISA microplates (20 µL samples and 200 µL reagents) and an automatic microplate autoreader were used. The classical nitroblue tetrazolium (NBT) stain reagent solution of Johnson et al. (1982) was modified using a SIGMA reagent to render it stable for up to one year. SeFa concentrations measured by the new method in 30 human blood plasma samples were compared with values obtained by the standard (generally used) LaRoche kit procedure. Fifteen cow, 13 dog and 18 chicken plasma samples were assayed by the new automated ‘micro’ method as well as by the manual test tube ‘macro’ method commonly used earlier. The modified reagent was applied for both methods. The coefficient of correlation (r) between the results obtained by the two methods was consistently between 0.94 and 0.98 (p < 0.001).

scholarly journals A simple electroelution method for rapid protein purification: isolation and antibody production of alpha toxin fromClostridium septicum

PeerJ ◽  
2017 ◽  
Vol 5 ◽  
pp. e3407 ◽  
Author(s):  
Lorena Vázquez-Iglesias ◽  
Borja Estefanell-Ucha ◽  
Leticia Barcia-Castro ◽  
María Páez de la Cadena ◽  
Paula Álvarez-Chaver ◽  
...  
Keyword(s):  
Protein Purification ◽  
Polyclonal Antibodies ◽  
Clinical Intervention ◽  
Farm Animals ◽  
Alpha Toxin ◽  
Slot Blot ◽  
Clostridium Septicum ◽  
Time Saving ◽  
Specific Antibodies

Clostridium septicumproduces a number of diseases in human and farm animals which, in most of the cases, are fatal without clinical intervention. Alpha toxin is an important agent and the unique lethal virulent factor produced byClostridium septicum.This toxin is haemolytic, highly lethal and necrotizing activities but is being used as an antigen to develop animal vaccines. The aim of this study was to isolate the alpha toxin ofClostridium septicumand produce highly specific antibodies against it. In this work, we have developed a simple and efficient method for alpha toxin purification, based on electroelution that can be used as a time-saving method for purifying proteins. This technique avoids contamination by other proteins that could appear during other protein purification techniques such chromatography. The highly purified toxin was used to produce polyclonal antibodies. The specificity of the antibodies was tested by western blot and these antibodies can be applied to the quantitative determination of alpha toxin by slot blot.

Sign in / Sign up

Export Citation Format

Share Document