scholarly journals OFDM-Based Generalized Optical MIMO

2020 ◽  
Author(s):  
Chen Chen ◽  
Xin Zhong ◽  
Shu Fu ◽  
Xin Jian ◽  
Min Liu ◽  
...  
Keyword(s):  
Frequency Domain ◽  
Time Domain ◽  
Orthogonal Frequency Division Multiplexing ◽  
Direct Detection ◽  
Multiple Input Multiple Output ◽  
Detection Algorithm ◽  
Spatial Multiplexing ◽  
Spatial Modulation ◽  
Input Multiple Output ◽  
The Time Domain

<p>The combination of multiple-input multiple-output (MIMO) transmission and orthogonal frequency division multiplexing (OFDM) modulation has been shown to be an effective way to substantially enhance the capacity of bandlimited optical wireless communication (OWC) systems. In this paper, we propose four OFDM-based generalized optical MIMO techniques for intensity modulation/direct detection (IM/DD) OWC systems, including OFDM-based frequency-domain generalized spatial modulation (FD-GSM), frequency-domain generalized spatial multiplexing (FD-GSMP), time-domain generalized spatial modulation (TD-GSM) and time-domain generalized spatial multiplexing (TD-GSMP). For OFDM-based FD-GSM and FDGSMP, spatial mapping is performed in the frequency domain, while it is carried out in the time domain for OFDM-based TDGSM and TD-GSMP. To efficiently estimate both spatial and constellation symbols in each OFDM-based generalized optical MIMO technique, a corresponding maximum-likelihood (ML) detection algorithm is designed. Extensive simulations are conducted to evaluate and compare the performance of the proposed four OFDM-based generalized optical MIMO techniques in a typical indoor environment. Simulation results demonstrate the superiority of OFDM-based TD-GSM and TD-GSMP for various spectral efficiencies of 4, 5 and 6 bits/s/Hz, when a relatively high secondary direct current (DC) bias is adopted.</p>

scholarly journals OFDM-Based Generalized Optical MIMO

2020 ◽  
Author(s):  
Chen Chen ◽  
Xin Zhong ◽  
Shu Fu ◽  
Xin Jian ◽  
Min Liu ◽  
...  
Keyword(s):  
Frequency Domain ◽  
Time Domain ◽  
Orthogonal Frequency Division Multiplexing ◽  
Direct Detection ◽  
Multiple Input Multiple Output ◽  
Detection Algorithm ◽  
Spatial Multiplexing ◽  
Spatial Modulation ◽  
Input Multiple Output ◽  
The Time Domain

<p>The combination of multiple-input multiple-output (MIMO) transmission and orthogonal frequency division multiplexing (OFDM) modulation has been shown to be an effective way to substantially enhance the capacity of bandlimited optical wireless communication (OWC) systems. In this paper, we propose four OFDM-based generalized optical MIMO techniques for intensity modulation/direct detection (IM/DD) OWC systems, including OFDM-based frequency-domain generalized spatial modulation (FD-GSM), frequency-domain generalized spatial multiplexing (FD-GSMP), time-domain generalized spatial modulation (TD-GSM) and time-domain generalized spatial multiplexing (TD-GSMP). For OFDM-based FD-GSM and FDGSMP, spatial mapping is performed in the frequency domain, while it is carried out in the time domain for OFDM-based TDGSM and TD-GSMP. To efficiently estimate both spatial and constellation symbols in each OFDM-based generalized optical MIMO technique, a corresponding maximum-likelihood (ML) detection algorithm is designed. Extensive simulations are conducted to evaluate and compare the performance of the proposed four OFDM-based generalized optical MIMO techniques in a typical indoor environment. Simulation results demonstrate the superiority of OFDM-based TD-GSM and TD-GSMP for various spectral efficiencies of 4, 5 and 6 bits/s/Hz, when a relatively high secondary direct current (DC) bias is adopted.</p>

DESIGN AND IMPLEMENTATION OF SYMBOL DETECTOR FOR MIMO SPATIAL MULTIPLEXING SYSTEMS

2011 ◽  
Vol 20 (04) ◽  
pp. 727-739 ◽  
Author(s):  
YUNHO JUNG ◽  
SEONGJOO LEE ◽  
JAESEOK KIM
Keyword(s):  
Multiple Input Multiple Output ◽  
Detection Algorithm ◽  
Spatial Multiplexing ◽  
Error Performance ◽  
Cell Library ◽  
Design And Implementation ◽  
Symbol Detection ◽  
Input Multiple Output ◽  
Hardware Description ◽  
Hardware Costs

In this paper, we propose an efficient symbol detection algorithm for multiple-input multiple-output spatial multiplexing (MIMO-SM) systems and present its design and implementation results. By enhancing the error performance of the first detected symbol that causes error propagation, the proposed algorithm achieves a considerable performance gain compared with the conventional sorted QR decomposition (SQRD) based detection and the ordered successive detection (OSD) algorithms. The bit error rate (BER) performance of the proposed detection algorithm is evaluated by a simulation. In the case of a 16QAM MIMO-SM system with 4 transmit and 4 receive (4 × 4) antennas, at BER = 10-3 the proposed algorithm results in a gain improvement of about 2.5–13.5 dB over the previous algorithms. The proposed detection algorithm was designed in a hardware description language (HDL) and synthesized to gate-level circuits using 0.18 μm 1.8 V CMOS standard cell library. The results show that the proposed algorithm can be implemented without increasing the hardware costs significantly.

scholarly journals Fast Scalable Architecture of a Near-ML Detector for a MIMO-QSM Receiver

Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1509 ◽  
Author(s):  
Ismael Lopez ◽  
L. Pizano-Escalante ◽  
Joaquin Cortez ◽  
O. Longoria-Gandara ◽  
Armando Garcia
Keyword(s):  
Multiple Input Multiple Output ◽  
Low Complexity ◽  
Detection Algorithm ◽  
Spatial Modulation ◽  
Impact Performance ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Receiver Performance ◽  
Limited Precision ◽  
Numerical Precision

This paper presents a proposal for an architecture in FPGA for the implementation of a low complexity near maximum likelihood (Near-ML) detection algorithm for a multiple input-multiple output (MIMO) quadrature spatial modulation (QSM) transmission system. The proposed low complexity detection algorithm is based on a tree search and a spherical detection strategy. Our proposal was verified in the context of a MIMO receiver. The effects of the finite length arithmetic and limited precision were evaluated in terms of their impact on the receiver bit error rate (BER). We defined the minimum fixed point word size required not to impact performance adversely for n T transmit antennas and n R receive antennas. The results showed that the proposal performed very near to optimal with the advantage of a meaningful reduction in the complexity of the receiver. The performance analysis of the proposed detector of the MIMO receiver under these conditions showed a strong robustness on the numerical precision, which allowed having a receiver performance very close to that obtained with floating point arithmetic in terms of BER; therefore, we believe this architecture can be an attractive candidate for its implementation in current communications standards.

scholarly journals Phase Noise Effect on MIMO-OFDM Systems with Common and Independent Oscillators

2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Xiaoming Chen ◽  
Hua Wang ◽  
Wei Fan ◽  
Yaning Zou ◽  
Andreas Wolfgang ◽  
...  
Keyword(s):  
Orthogonal Frequency Division Multiplexing ◽  
Multiple Input Multiple Output ◽  
Spatial Multiplexing ◽  
Ofdm Systems ◽  
Error Vector Magnitude ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Mimo Ofdm ◽  
Value Decomposition ◽  
Vector Magnitude

The effects of oscillator phase noises (PNs) on multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems are studied. It is shown that PNs of common oscillators at the transmitter and at the receiver have the same influence on the performance of (single-stream) beamforming MIMO-OFDM systems, yet different influences on spatial multiplexing MIMO-OFDM systems with singular value decomposition (SVD) based precoding/decoding. When each antenna is equipped with an independent oscillator, the PNs at the transmitter and at the receiver have different influences on beamforming MIMO-OFDM systems as well as spatial multiplexing MIMO-OFDM systems. Specifically, the PN effect on the transmitter (receiver) can be alleviated by having more transmit (receive) antennas for the case of independent oscillators. It is found that the independent oscillator case outperforms the common oscillator case in terms of error vector magnitude (EVM).

scholarly journals MIMO-OFDM equaliser for spatial multiplexing transmission modes

2010 ◽  
Vol 8 ◽  
pp. 81-85 ◽  
Author(s):  
P. Beinschob ◽  
U. Zölzer
Keyword(s):  
Channel Coding ◽  
Orthogonal Frequency Division Multiplexing ◽  
Multiple Input Multiple Output ◽  
Spatial Multiplexing ◽  
Performance Loss ◽  
Low Snr ◽  
Input Multiple Output ◽  
Spatial Interference ◽  
The Impact ◽  
Ber Performance

Abstract. In search for faster and more reliable communication, multiple-input multiple-output (MIMO) in conjuction with Orthogonal Frequency Division Multiplexing (OFDM) are subject of extensive research. In spatial multiplexing transmission an instantaneous rise of data rates governed by the number of transmit antennas can be realised. The system performance depends highly on signal-to-interference-plus-noise ratios (SINR) at the receiver. The receiver's equaliser is supposed to maximize the SINR by mitigating the spatial interference and thus separating the transmitted signals. For this problem several solutions exist such as linear and nonlinear, per subcarrier or OFDM symbol-based. An overview of common algorithms is given and complexity is discussed. Bit error rate (BER) performance evaluations are presented. Another aspect is the impact of the equalisation strategy on the performance of bit-interleaved soft information-based channel coding schemes. As a representative, LDPC codes are chosen. Simulation results show a significant BER performance loss for symbol decision-based equalisers compared to the uncoded performance. To overcome this problem a modification of the Maximum Likelihood algorithm is proposed which yields good performance for low SNR applications.

scholarly journals Improved QRD-M Detection Algorithm for Generalized Spatial Modulation Scheme

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Xiaorong Jing ◽  
Mingyue Wang ◽  
Wei Zhou ◽  
Hongqing Liu
Keyword(s):  
Computational Complexity ◽  
Maximum Likelihood ◽  
Multiple Input Multiple Output ◽  
Low Complexity ◽  
Detection Algorithm ◽  
Spatial Modulation ◽  
Modulation Scheme ◽  
Transmission Scheme ◽  
Imperfect Detection ◽  
Input Multiple Output

Generalized spatial modulation (GSM) is a spectral and energy efficient multiple-input multiple-output (MIMO) transmission scheme. It will lead to imperfect detection performance with relatively high computational complexity by directly applying the original QR-decomposition with M algorithm (QRD-M) to the GSM scheme. In this paper an improved QRD-M algorithm is proposed for GSM signal detection, which achieves near-optimal performance but with relatively low complexity. Based on the QRD, the improved algorithm firstly transforms the maximum likelihood (ML) detection of the GSM signals into searching an inverted tree structure. Then, in the searching process of the M branches, the branches corresponding to the illegitimate transmit antenna combinations (TACs) and related to invalid number of active antennas are cut in order to improve the validity of the resultant branches at each level by taking advantage of characteristics of GSM signals. Simulation results show that the improved QRD-M detection algorithm provides similar performance to maximum likelihood (ML) with the reduced computational complexity compared to the original QRD-M algorithm, and the optimal value of parameter M of the improved QRD-M algorithm for detection of the GSM scheme is equal to modulation order plus one.

JOINT INTERPRETATION OF AIRBORNE ELECTROMAGNETIC DATA IN THE TIME DOMAIN AND FREQUENCY DOMAIN

2018 ◽  
Vol 12 (7-8) ◽  
pp. 76-83
Author(s):  
E. V. KARSHAKOV ◽  
J. MOILANEN
Keyword(s):  
Fourier Transform ◽  
Frequency Domain ◽  
Time Domain ◽  
Frequency Interval ◽  
Single Spectrum ◽  
Simultaneous Inversion ◽  
Homogeneous Half Space ◽  
Time Domain Data ◽  
The Time Domain

Тhe advantage of combine processing of frequency domain and time domain data provided by the EQUATOR system is discussed. The heliborne complex has a towed transmitter, and, raised above it on the same cable a towed receiver. The excitation signal contains both pulsed and harmonic components. In fact, there are two independent transmitters operate in the system: one of them is a normal pulsed domain transmitter, with a half-sinusoidal pulse and a small "cut" on the falling edge, and the other one is a classical frequency domain transmitter at several specially selected frequencies. The received signal is first processed to a direct Fourier transform with high Q-factor detection at all significant frequencies. After that, in the spectral region, operations of converting the spectra of two sounding signals to a single spectrum of an ideal transmitter are performed. Than we do an inverse Fourier transform and return to the time domain. The detection of spectral components is done at a frequency band of several Hz, the receiver has the ability to perfectly suppress all sorts of extra-band noise. The detection bandwidth is several dozen times less the frequency interval between the harmonics, it turns out thatto achieve the same measurement quality of ground response without using out-of-band suppression you need several dozen times higher moment of airborne transmitting system. The data obtained from the model of a homogeneous half-space, a two-layered model, and a model of a horizontally layered medium is considered. A time-domain data makes it easier to detect a conductor in a relative insulator at greater depths. The data in the frequency domain gives more detailed information about subsurface. These conclusions are illustrated by the example of processing the survey data of the Republic of Rwanda in 2017. The simultaneous inversion of data in frequency domain and time domain can significantly improve the quality of interpretation.

scholarly journals Time and Frequency Domain Dynamic Analysis of Offshore Mooring

2021 ◽  
Vol 9 (7) ◽  
pp. 781
Author(s):  
Shi He ◽  
Aijun Wang
Keyword(s):  
Dynamic Analysis ◽  
Frequency Domain ◽  
Time Domain ◽  
Linearization Method ◽  
Euler Method ◽  
Single Component ◽  
Hydrodynamic Drag ◽  
Lumped Mass ◽  
Mooring Lines ◽  
The Time Domain

The numerical procedures for dynamic analysis of mooring lines in the time domain and frequency domain were developed in this work. The lumped mass method was used to model the mooring lines. In the time domain dynamic analysis, the modified Euler method was used to solve the motion equation of mooring lines. The dynamic analyses of mooring lines under horizontal, vertical, and combined harmonic excitations were carried out. The cases of single-component and multicomponent mooring lines under these excitations were studied, respectively. The case considering the seabed contact was also included. The program was validated by comparing with the results from commercial software, Orcaflex. For the frequency domain dynamic analysis, an improved frame invariant stochastic linearization method was applied to the nonlinear hydrodynamic drag term. The cases of single-component and multicomponent mooring lines were studied. The comparison of results shows that frequency domain results agree well with nonlinear time domain results.

A Multiple Harmonic Open-Loop Controller for Hydro/Aerodynamic Force Measurements in Rotating Machinery Using Magnetic Bearings

2002 ◽  
Vol 124 (4) ◽  
pp. 827-834 ◽  
Author(s):  
D. O. Baun ◽  
E. H. Maslen ◽  
C. R. Knospe ◽  
R. D. Flack
Keyword(s):  
Frequency Domain ◽  
Time Domain ◽  
Open Loop ◽  
Rotating Machinery ◽  
Operating Conditions ◽  
Rotor Vibration ◽  
Aerodynamic Forces ◽  
Analog Input ◽  
Input And Output ◽  
The Time Domain

Inherent in the construction of many experimental apparatus designed to measure the hydro/aerodynamic forces of rotating machinery are features that contribute undesirable parasitic forces to the measured or test forces. Typically, these parasitic forces are due to seals, drive couplings, and hydraulic and/or inertial unbalance. To obtain accurate and sensitive measurement of the hydro/aerodynamic forces in these situations, it is necessary to subtract the parasitic forces from the test forces. In general, both the test forces and the parasitic forces will be dependent on the system operating conditions including the specific motion of the rotor. Therefore, to properly remove the parasitic forces the vibration orbits and operating conditions must be the same in tests for determining the hydro/aerodynamic forces and tests for determining the parasitic forces. This, in turn, necessitates a means by which the test rotor’s motion can be accurately controlled to an arbitrarily defined trajectory. Here in, an interrupt-driven multiple harmonic open-loop controller was developed and implemented on a laboratory centrifugal pump rotor supported in magnetic bearings (active load cells) for this purpose. This allowed the simultaneous control of subharmonic, synchronous, and superharmonic rotor vibration frequencies with each frequency independently forced to some user defined orbital path. The open-loop controller was implemented on a standard PC using commercially available analog input and output cards. All analog input and output functions, transformation of the position signals from the time domain to the frequency domain, and transformation of the open-loop control signals from the frequency domain to the time domain were performed in an interrupt service routine. Rotor vibration was attenuated to the noise floor, vibration amplitude ≈0.2 μm, or forced to a user specified orbital trajectory. Between the whirl frequencies of 14 and 2 times running speed, the orbit semi-major and semi-minor axis magnitudes were controlled to within 0.5% of the requested axis magnitudes. The ellipse angles and amplitude phase angles of the imposed orbits were within 0.3 deg and 1.0 deg, respectively, of their requested counterparts.

Sign in / Sign up

Export Citation Format

Share Document