scholarly journals Investigation on An Innovative Hydrocarbon Sensor for Real Drive Emissions

2021 ◽  
Vol 84 (2) ◽  
pp. 39-49
Author(s):  
Muhammad Nor Azril Zulkafli ◽  
Norazlianie Sazali ◽  
Saiful Anwar Che Ghani ◽  
Maurice Kettner
Keyword(s):  
Internal Combustion Engines ◽  
Combustion Process ◽  
Test Methods ◽  
Pollutant Emissions ◽  
Combustion Engines ◽  
Limit Values ◽  
Strict Regulation ◽  
Measurement Concept ◽  
Light Duty Vehicles ◽  
Real Traffic

European law specifies limit values (and test methods) for pollutant emissions from light duty vehicles and heavy-duty engines including carbon monoxide (CO), hydrocarbons (HC), nitrogen oxide (NOx) and particulates, which are considered dangerous to human health. The internal combustion engines nowadays have strict regulation for emissions that resulted in the growth of demands for measuring methods and the measuring technology. WLTC is a new procedure that replaced the existing New European Diving Cycle (NEDC) to make the emissions become more effective when do the test in laboratory or in real traffic driving. The aim of this research is to investigate suitability of the sensor principle for HC measurement based on tests and their evaluations. The hydrocarbon sensor used to detect the HC by thermal ionization, which produces an ion current as the output voltage of the sensor. The results obtained by the ion measurement concept show that the optimization of the combustion process can be developed through simple mean.

scholarly journals RESEARCH ON THE COMBUSTION PROCESS OF NAVAL DIESEL ENGINES TO REDUCE POLLUTANT EMISSIONS

2020 ◽  
Vol 10 (2) ◽  
pp. 19-23
Author(s):  
Mihail Lucian DUMITRACHE ◽  
Nicolae BUZBUCHI
Keyword(s):  
Nitrogen Oxide ◽  
Diesel Engines ◽  
Internal Combustion Engines ◽  
Combustion Process ◽  
Internal Combustion ◽  
Coastal Areas ◽  
Pollutant Emissions ◽  
Combustion Engines ◽  
Nitrogen Oxide Emissions

The modelling of the process in internal combustion engines has been a permanent concern of specialists in the field. The complexity of the phenomena and the strong interdependence between them make the approach particularly difficult. The application of the provisions of the Protocol required the signatory countries, from 2010, to put in place measures to reduce nitrogen oxide emissions, especially in coastal areas, the most affected being, in the first instance, port technical vessels.

A phenomenological model for the description of unburned hydrocarbons emission in ultra-lean engines

2021 ◽  
pp. 146808742110050
Author(s):  
Enrica Malfi ◽  
Vincenzo De Bellis ◽  
Fabio Bozza ◽  
Alberto Cafari ◽  
Gennaro Caputo ◽  
...  
Keyword(s):  
Natural Gas ◽  
Internal Combustion Engines ◽  
Pollutant Emissions ◽  
Average Error ◽  
Combustion Engines ◽  
Nitric Oxides ◽  
Lean Burn ◽  
Fuel Charge ◽  
Unburned Hydrocarbons ◽  
Model Reliability

The adoption of lean-burn concepts for internal combustion engines working with a homogenous air/fuel charge is under development as a path to simultaneously improve thermal efficiency, fuel consumption, nitric oxides, and carbon monoxide emissions. This technology may lead to a relevant emission of unburned hydrocarbons (uHC) compared to a stoichiometric engine. The uHC sources are various and the relative importance varies according to fuel characteristics, engine operating point, and some geometrical details of the combustion chamber. This concern becomes even more relevant in the case of engines supplied with natural gas since the methane has a global warming potential much greater than the other major pollutant emissions. In this work, a simulation model describing the main mechanisms for uHC formation is proposed. The model describes uHC production from crevices and flame wall quenching, also considering the post-oxidation. The uHC model is implemented in commercial software (GT-Power) under the form of “user routine”. It is validated with reference to two large bore engines, whose bores are 31 and 46 cm (engines named accordingly W31 and W46). Both engines are fueled with natural gas and operated with lean mixtures (λ > 2), but with different ignition modalities (pre-chamber device or dual fuel mode). The engines under study are preliminarily schematized in the 1D simulation tool. The consistency of 1D engine schematizations is verified against the experimental data of BMEP, air flow rate, and turbocharger rotational speed over a load sweep. Then, the uHC model is validated against the engine-out measurements. The averaged uHC predictions highlight an average error of 7% and 10 % for W31 and W46 engines, respectively. The uHC model reliability is evidenced by the lack of need for a case-dependent adjustment of its tuning constants, also in presence of relevant variations of both engine load and ring pack design.

scholarly journals Hydrogen application in internal combustion engines

2020 ◽  
Vol 21 (1) ◽  
pp. 14-19
Author(s):  
Arthur R. Asoyan ◽  
Igor K. Danilov ◽  
Igor A. Asoyan ◽  
Georgy M. Polishchuk
Keyword(s):  
Burning Rate ◽  
Internal Combustion Engines ◽  
Combustion Process ◽  
Hydrocarbon Fuel ◽  
Internal Combustion ◽  
Technical Solution ◽  
Combustion Engines ◽  
Environmental Friendliness ◽  
Petroleum Origin ◽  
Order Of Magnitude

A technical solution has been proposed to reduce the consumption of basic hydrocarbon fuel, to improve the technical, economic and environmental performance of internal combustion engines by affecting the combustion process of the fuel-air mixture with a minimum effective mass fraction of hydrogen additive in the fuel-air mixture. The burning rate of hydrogen-air mixtures is an order of magnitude greater than the burning rate of similar mixtures based on gasoline or diesel fuel, compared with the former, they are favorably distinguished by their greater detonation stability. With minimal additions of hydrogen to the fuel-air charge, its combustion time is significantly reduced, since hydrogen, having previously mixed with a portion of the air entering the cylinder and burning itself, effectively ignites the mixture in its entirety. Issues related to the accumulation of hydrogen on board the car, its storage, explosion safety, etc., significantly inhibit the development of mass production of cars using hydrogen fuel. The described technical solution allows the generation of hydrogen on board the car and without accumulation to use it as an additive to the main fuel in internal combustion engines. The technical result is to reduce the consumption of hydrocarbon fuels (of petroleum origin) and increase the environmental friendliness of the car due to the reduction of the emission of harmful substances in exhaust gases.

scholarly journals Assessment of thermodynamic cycle of internal combustion engine in terms of rightsizing

2019 ◽  
Vol 178 (3) ◽  
pp. 182-186
Author(s):  
Zbigniew SROKA ◽  
Maciej DWORACZYŃSKI
Keyword(s):  
Internal Combustion Engine ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Thermodynamic Cycle ◽  
Internal Combustion ◽  
Research Problem ◽  
Combustion Engines ◽  
Operating Characteristics ◽  
Swept Volume

The modification of the downsizing trend of internal combustion engines towards rightsizing is a new challenge for constructors. The change in the displacement volume of internal combustion engines accompanying the rightsizing idea may in fact mean a reduction or increase of the defining swept volume change factors and thus may affect the change in the operating characteristics as a result of changes in combustion process parameters - a research problem described in this publication. Incidents of changes in the displacement volume were considered along with the change of the compression space and at the change of the geometric degree of compression. The new form of the mathematical dependence describing the efficiency of the thermodynamic cycle makes it possible to evaluate the opera-tion indicators of the internal combustion engine along with the implementation of the rightsizing idea. The work demonstrated the in-variance of cycle efficiency with different forms of rightsizing.

scholarly journals Analysis of thermodynamic parameters in spark ignition VCR engine

2019 ◽  
Vol 294 ◽  
pp. 05001
Author(s):  
Patryk Urbański ◽  
Maciej Bajerlein ◽  
Jerzy Merkisz ◽  
Andrzej Ziółkowski ◽  
Dawid Gallas
Keyword(s):  
Thermodynamic Parameters ◽  
Motion Analysis ◽  
Internal Combustion Engines ◽  
Initial Conditions ◽  
Combustion Process ◽  
Internal Combustion ◽  
3D Models ◽  
Spark Ignition ◽  
Combustion Engines ◽  
Combustion Processes

3D models of Szymkowiak and conventional engines were created in the Solidworks program. During the motion analysis, the characteristics of the piston path were analyzed for the two considered engine units. The imported file with the generated piston routes was used in the AVL Fire program, which simulated combustion processes in the two engines with identical initial conditions. The configurations for two different compression ratios were taken into account. The basic thermodynamic parameters occurring during the combustion process in internal combustion engines were analyzed.

scholarly journals Effect of Fuel and Air Dilution on Syngas Combustion in an Optical SI Engine

Energies ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1566 ◽  
Author(s):  
S.D. Martinez-Boggio ◽  
S.S. Merola ◽  
P. Teixeira Lacava ◽  
A. Irimescu ◽  
P.L. Curto-Risso
Keyword(s):  
Internal Combustion Engines ◽  
Combustion Process ◽  
Visible Spectrum ◽  
Propagation Speed ◽  
Fuel Mixture ◽  
Operating Conditions ◽  
Inert Gases ◽  
Pollutant Emissions ◽  
Si Engine ◽  
Lean Burn

To mitigate the increasing concentration of carbon dioxide in the atmosphere, energy production processes must change from fossil to renewable resources. Bioenergy utilization from agricultural residues can be a step towards achieving this goal. Syngas (fuel obtained from biomass gasification) has been proved to have the potential of replacing fossil fuels in stationary internal combustion engines (ICEs). The processes associated with switching from traditional fuels to alternatives have always led to intense research efforts in order to have a broad understanding of the behavior of the engine in all operating conditions. In particular, attention needs to be focused on fuels containing relatively high concentrations of hydrogen, due to its faster propagation speed with respect to traditional fossil energy sources. Therefore, a combustion study was performed in a research optical SI engine, for a comparison between a well-established fuel such as methane (the main component of natural gas) and syngas. The main goal of this work is to study the effect of inert gases in the fuel mixture and that of air dilution during lean fuelling. Thus, two pure syngas blends (mixtures of CO and H2) and their respective diluted mixtures (CO and H2 with 50vol% of inert gases, CO2 and N2) were tested in several air-fuel ratios (stoichiometric to lean burn conditions). Initially, the combustion process was studied in detail by traditional thermodynamic analysis and then optical diagnostics were applied thanks to the optical access through the piston crown. Specifically, images were taken in the UV-visible spectrum of the entire cycle to follow the propagation of the flame front. The results show that hydrogen promotes flame propagation and reduces its distortion, as well as resulting in flames evolving closer to the spark plug. All syngas blends show a stable combustion process, even in conditions of high air and fuel dilution. In the leanest case, real syngas mixtures present a decrease in terms of performance due to significant reduction in volumetric efficiency. However, this condition strongly decreases pollutant emissions, with nitrogen oxide (NOx) concentrations almost negligible.

scholarly journals A design tool for the performances comparison of innovative energy systems for naval applications

2019 ◽  
Vol 113 ◽  
pp. 02005
Author(s):  
D. Rattazzi ◽  
M. Rivarolo ◽  
T. Lamberti ◽  
L. Magistri
Keyword(s):  
Gas Turbines ◽  
Internal Combustion Engines ◽  
Energy Systems ◽  
Design Tool ◽  
Pollutant Emissions ◽  
Combustion Engines ◽  
Wide Range ◽  
Storage Technologies ◽  
Market Solutions ◽  
And Storage

This paper aims to develop a tool for the performances comparison of innovative energy systems on board ships, both for concentrated and distributed generation applications. In the first part of the study, the tool database has been developed throughout a wide analysis of the available market solutions in terms of energy generation devices (i.e. fuel cells, internal combustion engines, micro gas turbines), fuels (hydrogen, natural gas, diesel) and related storage technologies. Many of these data have been collected also thanks to the laboratory experience of the authors’ research group on different innovative energy systems. From the database, a wide range of maps has been created, correlating costs, volumes, weights and emissions with the installed power and the operational hours required, given by the user as input. The tool highlights the best solution according to the different relevance chosen by the user for each key parameter (i.e. costs, volumes, emissions). In the second part, two different case studies are presented in order to underline how the installed power, the different ship typology and the user requirements affect the choice of the best solution. It is worth noting that the methodology has a general value, as the tool can be applied to both the design of new ships, and to the retrofit of already existing ships in order to respect new requirements (e.g. more and more stringent normative in terms of pollutant emissions in ports and restricted areas). Furthermore, the database can be easily extended to other generation and storage technologies.

Oxygen Sensor Testing for Automotive Applications

2020 ◽  
Vol 896 ◽  
pp. 249-254
Author(s):  
Dragos Tutunea ◽  
Ilie Dumitru ◽  
Oana Victoria Oţăt ◽  
Laurentiu Racila ◽  
Ionuţ Daniel Geonea ◽  
...  
Keyword(s):  
Internal Combustion Engines ◽  
Oxygen Sensor ◽  
Oxygen Sensors ◽  
Pollutant Emissions ◽  
Combustion Engines ◽  
Automotive Applications ◽  
Combustion Gases ◽  
Experimental Stand ◽  
Residual Oxygen ◽  
Sensor Degradation

During the operation of internal combustion engines the air-fuel ratio (A/F) is an important parameter which affects fuel consumption and pollutant emissions. The automotive oxygen sensor (Lambda) measures the quantity of residual oxygen in the combustion gases. Sensor degradation in time due to the exposure to high temperatures causes a distortion in controlling the A/F with the increase in gas emissions. In this paper an experimental stand is designed to test oxygen sensor degradation in laboratory condition. Four oxygen sensors were tested function of temperature and time recording their variation in resistance and voltage. The results showed similar values in the curves for all sensors tested.

scholarly journals Energetic Analysis of the Aircraft Diesel Engine

2019 ◽  
Vol 252 ◽  
pp. 05012
Author(s):  
Łukasz Grabowski ◽  
Konrad Pietrykowski ◽  
Paweł Karpiński
Keyword(s):  
Steady State ◽  
Diesel Engine ◽  
Energy Balance ◽  
Internal Combustion Engines ◽  
Combustion Process ◽  
Energy Losses ◽  
Exhaust Gas ◽  
Combustion Engines ◽  
Engine Model ◽  
Energetic Analysis

The analysis of the distribution of thermal energy generated during the combustion process in internal combustion engines and the estimation of individual losses are important regarding performance and efficiency. The article analyses the energy balance of the designed two-stroke opposed piston diesel engines with offset, i.e. the angle by which the crankshaft at the side of exhaust ports is ahead of the crankshaft at the side of intake ports. Based on the developed zero-dimensional engine model, a series of simulations were performed in steady-state conditions using the AVL BOOST software. The values of individual energy losses, including cooling losses, exhaust gas losses, friction losses were obtained. The influence of decreasing and increasing the offset on the performance of the tested engine was analysed.

Sign in / Sign up

Export Citation Format

Share Document