scholarly journals A new physical pattern – consistency of the factor of dynamic relations between velocity vector modulus and longitudinal acceleration of missile warheads

2021 ◽  
pp. 72-75
Author(s):  
A. S. Ustinov
Keyword(s):  
Velocity Vector ◽  
Flight Test ◽  
Complete Analysis ◽  
Parameter Estimates ◽  
Reliable Determination ◽  
Existing Problems ◽  
Longitudinal Acceleration ◽  
Dynamic Relation ◽  
Dynamic Relations

The paper describes the existing problems in determination of all scheduled evaluations of missile warhead performance during flight tests and puts forward one of the possible methods of problem solving. Besides, the paper gives the results of investigation of the properties of the factor of dynamic relations between the velocity vector modulus and longitudinal acceleration of missile warheads within the atmospheric passive flight leg – the dynamic relation factor is constant in different flight test conditions. The notion of the reference dynamic relation factor is reasonably introduced for both parameters under study in order to provide reliable determination of parameter estimates, and hence, to conduct a complete analysis of experimental launch results.

Galactic orbits of stars

1966 ◽  
Vol 25 ◽  
pp. 93-97
Author(s):  
Richard Woolley
Keyword(s):  
Globular Cluster ◽  
Potential Field ◽  
High Velocity ◽  
Velocity Vector ◽  
Variable Stars ◽  
The Sun ◽  
Proper Motions ◽  
Rr Lyrae ◽  
The Galaxy

It is now possible to determine proper motions of high-velocity objects in such a way as to obtain with some accuracy the velocity vector relevant to the Sun. If a potential field of the Galaxy is assumed, one can compute an actual orbit. A determination of the velocity of the globular clusterωCentauri has recently been completed at Greenwich, and it is found that the orbit is strongly retrograde in the Galaxy. Similar calculations may be made, though with less certainty, in the case of RR Lyrae variable stars.

A panel of mono- and dinucleotide microsatellite markers is required for reliable determination of the MSI status in colorectal cancer

2001 ◽  
Vol 120 (5) ◽  
pp. A599-A599
Author(s):  
C ARNOLD ◽  
A GOEL ◽  
J CARETHERS ◽  
L WASSERMAN ◽  
C COMPTON ◽  
...  
Keyword(s):  
Colorectal Cancer ◽  
Microsatellite Markers ◽  
Reliable Determination

Colorimetric Determination of Fluoride in Drinking Groundwater using a Polymeric Zirconium Complex of 5-(2-Carboxyphenylazo)-8-Hydroxyquinoline

2013 ◽  
Vol 12 (7) ◽  
pp. 460-465
Author(s):  
Sameer Amereih ◽  
Zaher Barghouthi ◽  
Lamees Majjiad
Keyword(s):  
Drinking Water ◽  
Detection Limit ◽  
Complex Formation ◽  
Molar Absorptivity ◽  
Colorimetric Determination ◽  
Zirconium Complex ◽  
Reliable Determination ◽  
Percentage Recovery ◽  
Quantitation Limit

A sensitive colorimetric determination of fluoride in drinking water has been developed using a polymeric zirconium complex of 5-(2-Carboxyphenylazo)-8-Hydroxyquinoline as fluoride reagents. The method allowed a reliable determination of fluoride in range of (0.0-1.5) mg L-1. The molar absorptivity of the complex formation is 7695 ± 27 L mol-1 cm-1 at 460 nm. The sensitivity, detection limit, quantitation limit, and percentage recovery for 1.0 mg L-1 fluoride for the proposed method were found to be 0.353 ± 0.013 μg mL-1, 0.1 mg L-1, 0.3 mg L-1, and 101.7 ± 4.1, respectively.

21,22-Disubstituted 18α,19βH-Ursane Derivatives with Oxabicyclooctane System in Ring E

1993 ◽  
Vol 58 (1) ◽  
pp. 173-190 ◽  
Author(s):  
Eva Klinotová ◽  
Jiří Klinot ◽  
Václav Křeček ◽  
Miloš Buděšínský ◽  
Bohumil Máca
Keyword(s):  
Spectral Data ◽  
Spin Systems ◽  
Coupling Constants ◽  
Complete Analysis ◽  
Nmr Spectrum ◽  
Proton Proton ◽  
H Nmr ◽  
Proton Coupling ◽  
C Nmr

Reaction of 3β-acetoxy-21,22-dioxo-18α,19βH-ursan-28,20β-olide (IIIa) and 20β,28-epoxy-21,22-dioxo-19α,19βH-ursan-3β-yl acetate (IIIb) with diazomethane afforded derivatives XII-XIV with spiroepoxide group in position 21 or 22, which were further converted into hydroxy derivatives XV and XVII. Ethylene ketals VIII-X were also prepared. In connection with the determination of position and configuration of the functional groups at C(21) and C(22), the 1H and 13C NMR spectral data of the prepared compounds are discussed. Complete analysis of two four-spin systems in the 1H NMR spectrum of bisethylenedioxy derivative Xb led to the proton-proton coupling constants from which the structure with two 1,4-dioxane rings condensed with ring E, and their conformation, was derived.

scholarly journals Fast and Sensitive Determination of the Fungicide Carbendazim in Fruit Juices with an Immunosensor Based on White Light Reflectance Spectroscopy

Biosensors ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 153
Author(s):  
Georgios Koukouvinos ◽  
Chrysoula-Evangelia Karachaliou ◽  
Ioannis Raptis ◽  
Panagiota Petrou ◽  
Evangelia Livaniou ◽  
...  
Keyword(s):  
White Light ◽  
Optical Biosensor ◽  
Reflectance Spectroscopy ◽  
Fruit Juices ◽  
Sample Treatment ◽  
Assay Sensitivity ◽  
Reliable Determination ◽  
Light Reflectance ◽  
Sensitive Determination

Carbendazim is a systemic benzimidazole-type fungicide with broad-spectrum activity against fungi that undermine food products safety and quality. Despite its effectiveness, carbendazim constitutes a major environmental pollutant, being hazardous to both humans and animals. Therefore, fast and reliable determination of carbendazim levels in water, soil, and food samples is of high importance for both food industry and public health. Herein, an optical biosensor based on white light reflectance spectroscopy (WLRS) for fast and sensitive determination of carbendazim in fruit juices is presented. The transducer is a Si/SiO2 chip functionalized with a benzimidazole conjugate, and determination is based on a competitive immunoassay format. Thus, for the assay, a mixture of an in-house developed rabbit polyclonal anti-carbendazim antibody with the standards or samples is pumped over the chip, followed by biotinylated secondary antibody and streptavidin. The WLRS platform allows for real-time monitoring of biomolecular interactions carried out onto the Si/SiO2 chip by transforming the shift in the reflected interference spectrum caused by the immunoreaction to effective biomolecular adlayer thickness. The sensor is able to detect 20 ng/mL of carbendazim in fruit juices with high accuracy and precision (intra- and inter-assay CVs ≤ 6.9% and ≤9.4%, respectively) in less than 30 min, applying a simple sample treatment that alleviates any “matrix-effect” on the assay results and a 60 min preincubation step for improving assay sensitivity. Excellent analytical characteristics and short analysis time along with its small size render the proposed WLRS immunosensor ideal for future on-the-spot determination of carbendazim in food and environmental samples.

scholarly journals Exploitation of HPLC Analytical Method for Simultaneous Determination of Six Principal Unsaturated Fatty Acids in Oviductus Ranae Based on Quantitative Analysis of Multi-Components by Single-Marker (QAMS)

Molecules ◽  
2021 ◽  
Vol 26 (2) ◽  
pp. 479
Author(s):  
Shihan Wang ◽  
Yuanshuai Gan ◽  
Hong Kan ◽  
Xinxin Mao ◽  
Yongsheng Wang
Keyword(s):  
Fatty Acids ◽  
Quantitative Analysis ◽  
Unsaturated Fatty Acids ◽  
Internal Standard ◽  
Active Components ◽  
Reliable Determination ◽  
External Standard Method ◽  
Single Marker ◽  
Oviductus Ranae

As one of the featured products in northeast China, Oviductus Ranae has been widely used as a nutritious food, which contains a variety of bioactive unsaturated fatty acids (UFAs). It is necessary to establish a scientific and reliable determination method of UFA contents in Oviductus Ranae. In this work, six principal UFAs in Oviductus Ranae, namely eicosapentaenoic acid (EPA), linolenic acid (ALA), docosahexaenoic acid (DHA), arachidonic acid (ARA), linoleic acid (LA) and oleic acid (OA), were identified using UPLC-MS/MS. The UFAs identified in Oviductus Ranae were further separated based on the optimized RP-HPLC conditions. Quantitative analysis of multi-components by single-marker (QAMS) method was implemented in content determination of EPA, ALA, DHA, ARA and OA, where LA was used as the internal standard. The experiments based on Taguchi design verified the robustness of the QAMS method on different HPLC instruments and chromatographic columns. The QAMS and external standard method (ESM) were used to calculate the UFA content of 15 batches of Oviductus Ranae samples from different regions. The relative error (r < 0.73%) and cosine coefficient showed that the two methods obtained similar contents, and the method validations met the requirements. The results showed that QAMS can comprehensively and effectively control the quality of UFAs in Oviductus Ranae which provides new ideas and solutions for studying the active components in Oviductus Ranae.

scholarly journals Does the manual insertion torque of smartpegs affect the outcome of implant stability quotients (ISQ) during resonance frequency analysis (RFA)?

2019 ◽  
Vol 5 (1) ◽  
Author(s):  
Ingrid Kästel ◽  
Giles de Quincey ◽  
Jörg Neugebauer ◽  
Robert Sader ◽  
Peter Gehrke
Keyword(s):  
Resonance Frequency ◽  
Frequency Analysis ◽  
Insertion Torque ◽  
Resonance Frequency Analysis ◽  
Implant Stability ◽  
Reliable Determination ◽  
Torque Values ◽  
Finger Pressure

Abstract Background There is disagreement about the optimal torque for tightening smartpegs for resonance frequency analysis (RFA). Subjective finger pressure during hand tightening could affect the reliability of the resulting values. The aim of the current study was therefore to assess whether or not the insertion torque of a smartpeg magnetic device influences the implant stability quotient (ISQ) value during RFA. Methods Thirty self-tapping screw implants (XiVE S, Dentsply Sirona Implants, Bensheim, Germany) with a diameter of 3.8 mm and a length of 11 mm were inserted in three cow ribs with a bone quality of D1. The RFA value of each implant was measured (Ostell, FA W&H Dentalwerk, Bürmoos, Austria) in two orthogonal directions (mesial and buccal) after tightening the corresponding smartpeg type 45 with a mechanically defined value of 5 Ncm (Meg Torq device, Megagen, Daegu, South Korea) (test). Additionally, 4 different examiners measured the RFA after hand tightening the smartpegs, and the results were compared (control). Insertion torque values were determined by measuring the unscrew torque of hand seated smartpegs (Tohnichi Manufacturing Co. Ltd, Tokyo, Japan). Results The ISQ values varied from 2 to 11 Ncm by hand tightening and from 2 to 6 Ncm by machine tightening. The comparison of hand and machine tightening of smartpegs displayed only minor differences in the mean ISQ values with low standard deviations (mesial 79.76 ± 2,11, buccal 77.98 ± 2,) and no statistical difference (mesial p = 0,343 and buccal p = 0,890). Conclusions Manual tightening of smartpeg transducers allows for an objective and reliable determination of ISQ values during RFA.

A method for flight-test determination of propulsive efficiency and drag

1985 ◽  
Vol 22 (3) ◽  
pp. 200-207 ◽  
Author(s):  
Gifford Bull ◽  
Philip D. Bridges
Keyword(s):  
Flight Test ◽  
Propulsive Efficiency ◽  
Test Determination

Validation of two UHPLC-MS/MS methods for fast and reliable determination of quinolone residues in honey

2021 ◽  
pp. 1-13
Author(s):  
Akyıldız İsmail Emir ◽  
Yetimoğlu Kök Ece ◽  
Raday Sinem ◽  
Acar Sezer ◽  
Erdem Özge
Keyword(s):  
Reliable Determination

scholarly journals Proteomic Determination of Low-Molecular-Weight Glutenin Subunit Composition in Aroona Near-Isogenic Lines and Standard Wheat Cultivars

2021 ◽  
Vol 22 (14) ◽  
pp. 7709
Author(s):  
Kyoungwon Cho ◽  
You-Ran Jang ◽  
Sun-Hyung Lim ◽  
Susan B. Altenbach ◽  
Yong Q. Gu ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Allelic Variation ◽  
Reversed Phase ◽  
Glutenin Subunit ◽  
Low Molecular Weight ◽  
Near Isogenic Lines ◽  
Wheat Cultivars ◽  
Reliable Determination ◽  
Isogenic Lines

The low-molecular weight glutenin subunit (LMW-GS) composition of wheat (Triticum aestivum) flour has important effects on end-use quality. However, assessing the contributions of each LMW-GS to flour quality remains challenging because of the complex LMW-GS composition and allelic variation among wheat cultivars. Therefore, accurate and reliable determination of LMW-GS alleles in germplasm remains an important challenge for wheat breeding. In this study, we used an optimized reversed-phase HPLC method and proteomics approach comprising 2-D gels coupled with liquid chromatography–tandem mass spectrometry (MS/MS) to discriminate individual LMW-GSs corresponding to alleles encoded by the Glu-A3, Glu-B3, and Glu-D3 loci in the ‘Aroona’ cultivar and 12 ‘Aroona’ near-isogenic lines (ARILs), which contain unique LMW-GS alleles in the same genetic background. The LMW-GS separation patterns for ‘Aroona’ and ARILs on chromatograms and 2-D gels were consistent with those from a set of 10 standard wheat cultivars for Glu-3. Furthermore, 12 previously uncharacterized spots in ‘Aroona’ and ARILs were excised from 2-D gels, digested with chymotrypsin, and subjected to MS/MS. We identified their gene haplotypes and created a 2-D gel map of LMW-GS alleles in the germplasm for breeding and screening for desirable LMW-GS alleles for wheat quality improvement.

Sign in / Sign up

Export Citation Format

Share Document