SIMULATION BASED COMPLEX ENERGY ASSESSMENT OF OFFICE BUILDING FENESTRATION

2010 ◽  
Vol 16 (3) ◽  
pp. 345-351 ◽  
Author(s):  
Violeta Motuzienė ◽  
Egidijus Saulius Juodis
Keyword(s):  
Energy Consumption ◽  
Energy Efficient ◽  
Energy Demand ◽  
Office Building ◽  
Negative Effects ◽  
Energy Assessment ◽  
The North ◽  
Complex Evaluation ◽  
Lighting Energy ◽  
Glazed Facade

The number of office buildings with highly fenestrated facades is currently increasing in Lithuania and neighboring countries. Highly fenestrated facades reduce energy consumption for lighting and simultaneously increase energy consumption for heating, cooling, air conveying and may cause thermal and visual discomfort. Pursuing to reduce negative effects of the highly glazed facade, special glasses are frequently used. However, such windows usually increase demand for lighting energy. Therefore, when making early decisions about glazing the building, it is important to have a complex evaluation of energy demand related to the specific case. The paper presents the results of analysis made using energy simulation tools. The obtained results have shown that when shading is not applied, the north is the most energy efficient orientation to glazing for an air conditioned office building in cool climate zones like Lithuania. The most energy efficient window‐to‐wall ratios (WWR) for the south, east and west oriented façade are 20%, whereas for the north it makes 20–40%. However, such WWR values do not satisfy standard requirements for day lighting. Santrauka Pastaraisiais metais Lietuvoje ir kaimyninese šalyse daugeja administracines paskirties pastatu, kuriu dauguma išoriniu atitvaru yra skaidrios. Didesnis istiklinimo plotas lemia mažesnius energijos poreikius apšvietimui, tačiau didina šildymo ir vesinimo sistemu energijos poreikius, sukelia šilumini bei vizualini diskomforta. Neigiamai dideliu skaidriu atitvaru itakai sumažinti naudojami tamsinti ir kitu specialiu charakteristiku stiklai, tačiau tai savo ruožtu didina energijos poreiki apšvietimui. Todel, priimant sprendimus del pastato istiklinimo, svarbu prieš tai kompleksiškai išnagrineti konkretaus sprendimo itaka pastato energijos poreikiams. Straipsnyje pateikiama modeliuojant gautu rezultatu analize. Rezultatai parode, kad vesaus klimato šalyse, kurioms priklauso ir Lietuva, kondicionuojamu administraciniu pastatu fasadu, kai nenaudojamos apsaugos nuo saules priemones, energiškai efektyviausias istiklinimas yra i šiaures puse. Energiškai efektyviausias santykinis fasado istiklinimo plotas pietines, rytines ir vakarines orientacijos fasadams yra 20 %, o šiaurines ‐ 20–40 %. Tačiau tokie istiklinimo plotai neatitinka norminiu natūralaus apšvietimo reikalavimu.

scholarly journals Effects on Energy Demand in an Office Building Considering Location, Orientation, Façade Design and Internal Heat Gains—A Parametric Study

Energies ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 6170
Author(s):  
Jakob Carlander ◽  
Bahram Moshfegh ◽  
Jan Akander ◽  
Fredrik Karlsson
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
Energy Demand ◽  
Energy Use ◽  
Internal Heat ◽  
Office Building ◽  
Efficient Design ◽  
The North ◽  
Electricity Use ◽  
In The Beginning

12.9% of the energy use in the EU originates from the commercial and public sector. It has therefore become a priority to optimize energy efficiency in these buildings. The purpose of this study has been to explore how energy demand in a new office building is affected by different internal heat gains, location, orientation, and façade design, and also to see how different indicators can change perspective on energy efficiency. The study was performed with simulations in IDA-ICE with different façade design and changes in internal heat gains (IHG), orientation, and location. Energy demand was then compared to two different indicators. Using a façade designed to lower solar heat gains had little effect on energy demand in the north of Sweden, but slightly more effect further south. The amount of internal heat gains had significant effect on energy demand. Making deeper studies on design and internal heat gains should therefore be prioritized in the beginning of new building projects so the most energy-efficient design can be chosen. When the indicator kWh/m2 was used, the cases with low internal heat gains were perceived as the most energy efficient, while when kWh/(m2 × hpers) (hpers = hours of use) was used, the cases with high occupancy and low electricity use were considered to be the most energy efficient. Therefore, revising the standardized indicator is of great importance.

scholarly journals The Integrated Energy Consumption Index for Energy Biomass Grinding Technology Assessment

Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1417 ◽  
Author(s):  
Weronika Kruszelnicka ◽  
Robert Kasner ◽  
Patrycja Bałdowska-Witos ◽  
Józef Flizikowski ◽  
Andrzej Tomporowski
Keyword(s):  
Energy Consumption ◽  
Energy Demand ◽  
Power Input ◽  
Angular Speed ◽  
Process Efficiency ◽  
Engineering Systems ◽  
Energy Assessment ◽  
Consumption Index ◽  
Reduction Of Energy Consumption ◽  
Current Energy

The assessment of engineering objects in terms of energy consumption is an important part of sustainable development. Many materials, including those from the energy sector, need to undergo earlier processing, e.g., grinding. Grinding processes still demand a significant amount of energy, whereas current energy assessment methods do not take into account important parameters of the process, which makes it difficult to choose their optimal values. The study presents the analysis, testing, and assessment of mechanical engineering systems in terms of the energy consumption involved in the grinding of biomass intended for energy production purposes. A testing methodology was developed to improve the parameters of multi-disc grinding, including the reduction of energy consumption, power input, product quality improvement, and process efficiency. An original model of integrated energy consumption was developed. Tests were carried out on a five-disc grinder for five programs to assess the programmable angular speeds of the grinder discs. Output values, including specific energy demand, fragmentation degree, and integrated energy consumption, were assigned to each testing program. The test results were subjected to statistical analysis. Based on the authors’ own research, it was found that the angular speed of the discs and, consequently, the linear speed of the grinding blades, have a significant influence on the values of the integrated energy consumption of the preliminary process.

In Search of Causal Relationship between FDI, GDP, and Energy Consumption - Evidence from China

2012 ◽  
Vol 524-527 ◽  
pp. 3388-3391 ◽  
Author(s):  
Kuo Cheng Kuo ◽  
Chi Ya Chang ◽  
Mei Hui Chen ◽  
Wei Yu Chen
Keyword(s):  
Economic Growth ◽  
Energy Consumption ◽  
Environmental Protection ◽  
Granger Causality ◽  
Energy Demand ◽  
Negative Impact ◽  
Demand Management ◽  
Effective Control ◽  
Chinese Government ◽  
Negative Effects

The balance between economic growth and environmental protection has been the core concern of policy makers in developing countries for the past two decades. This study is one of the few studies to empirically inspect the relationship between economic growth, FDI, and energy consumption over the period 1978-2010 in China. The results reveal that there is a unidirectional Granger causality running from GDP to energy consumption. This suggests that increase of GDP will consume more energy and implementing of the energy conservation policies and energy demand management policies in China may not have negative impact on economic growth. Besides, a bi-directional Granger causality has been found between energy consumption and FDI. This implies that Chinese government should cautiously evaluate the positive and negative effects of FDI inflows and put efforts into making more effective control policies on environmental protection.

Electrical performance results of an energy efficient building with an integrated photovoltaic system

2010 ◽  
Vol 21 (3) ◽  
pp. 2-8 ◽  
Author(s):  
Sosten Ziuku ◽  
Edson L. Meyer
Keyword(s):  
Energy Consumption ◽  
Energy Efficient ◽  
Electrical Power ◽  
Electrical Energy ◽  
Photovoltaic System ◽  
Electrical Performance ◽  
Solar Panels ◽  
Building Integrated Photovoltaics ◽  
The North ◽  
Indoor And Outdoor

A 3.8 kW rooftop photovoltaic generator has been installed on an energy efficient house built at the University of Fort Hare, Alice campus, South Africa. The system, located on the north facing roof, started generating electrical power in February 2009. In addition to providing electrical energy, the photovoltaic panels also act as the building roofing material. An instrumentation and data acquisition system was installed to record the indoor and outdoor ambient temperature, indoor and outdoor relative humidity, wind speed and direction, solar irradiance, electrical energy produced by the solar panels and the household energy consumption. This paper presents the initial results of the electrical performance of the building integrated photovoltaics (BIPV) generator and energy consumption patterns in the energy efficient house.

scholarly journals Energy Conservation and Efficiency by Energy Efficient Motor in India

2019 ◽  
Vol 9 (1) ◽  
pp. 3917-3926
Keyword(s):  
Energy Consumption ◽  
Energy Conservation ◽  
Greenhouse Gas ◽  
Energy Efficient ◽  
Energy Demand ◽  
Industrial Sector ◽  
Primary Energy ◽  
Primary Energy Consumption ◽  
Ghg Emission ◽  
The Government

Electricity demand in India is increasing at a rapid pace because of growth in Economy, urbanization, infrastructure development and the living standard of people. According to the United Nation’s world population prospects (2017), India’s population is 1.34 billion which will go grow further and surpass China by 2025[1]. According to the IMF, the Indian economy is expected to grow by 7.5% in FY19-20 and 7.7% in FY20-21[2]. Increased population and growth in GDP are associated with increased energy demand. India’s primary energy consumption was 754 Mtoe in 2017 and expected to reach 1928 Mtoe in 2040[3]. Major energy demand is from the Industrial sector which was 51% of total primary energy consumption in 2017 and expected to reach 990 Mtoe, by 2040 [3]. Rising energy demand and dependence on coal-based energy generation capacity, leading to the emission of Green House Gases (GHG). Most of India’s Greenhouse gas emissions are from energy sector having 68.7% contribution in overall greenhouse gas emission. Agriculture, Industrial process land-use change and forestry (LUCF), and waste, contributed 6.0%, 3.8% and 1.9% respectively in overall GHG emission in 2014. [4]. Reducing the GHG emission in India is a major challenge in front of the Government as the Government has to maintain sustainable growth with the contribution in mitigating the effect of climate change. Govt. has pledged to Paris Agreement for the reduction in emission intensity of GDP by 33-35% by 2030 below 2005 level [5]. In the reduction of GHG emission, energy efficiency's contribution is estimated at approx. 51% [6]. The industrial sector can contribute most in reducing GHG emission and contributes to nationally determined contribution. Industry consumes 40%-45% of total energy consumption and motor-driven system consumes 70% [7] of total Industrial energy. Most of the energy in Industries are consumed to run the motor for various purposes and consumes a major chunk of energy which can be reduced to a significant level by replacing the standard motor with energy efficient motor. 90% of the motor in Indian industries are IE1 or below IE1 standard [8] and required replacement. By installing the energy efficient motor, the industry can save huge energy, cost and reduce CO2 emission. Observing the opportunity for energy saving by energy efficient motor, this paper aims to analyze how energy efficient motor is capable of reducing energy consumption, and how it can contribute to energy conservation. Methodology adopted in this paper is secondary research, that answers to questions like; why Industry need energy efficient motor, how energy efficient motor can save energy and increases efficiency, cost-benefit analysis of installing energy efficient motor, barriers to the installation of energy efficient motor and solution to those barriers in migration from the standard motor to energy efficient motor in India.

scholarly journals EVALUATION OF ENERGY-EFFICIENT RETROFIT POTENTIAL FOR GOVERNMENT OFFICES IN INDIA

2021 ◽  
Vol 6 (2) ◽  
pp. 03-17
Author(s):  
Gazal Dandia ◽  
◽  
Pratheek Sudhakaran ◽  
Chaitali Basu ◽  
◽  
...  
Keyword(s):  
Energy Consumption ◽  
Total Energy ◽  
Energy Efficient ◽  
Energy Demand ◽  
Energy Savings ◽  
High Energy ◽  
Payback Period ◽  
Total Energy Consumption ◽  
The Cost

Introduction: High energy consumption by buildings is a great threat to the environment and one of the major causes of climate change. With a population of 1.4 billion people and one of the fastest-growing economies in the world, India is extremely vital for the future of global energy markets. The energy demand for construction activities continues to rise and it is responsible for over one-third of global final energy consumption. Currently, buildings in India account for 35% of total energy consumption and the value is growing by 8% annually. Around 11% of total energy consumption are attributed to the commercial sector. Energy-efficient retrofitting of the built environments created in recent decades is a pressing urban challenge. Presently, most energy-efficient retrofit projects focus mainly on the engineering aspects. In this paper, we evaluate various retrofitting options, such as passive architectural interventions, active technological interventions, or a combination of both, to create the optimum result for the selected building. Methods: Based on a literature study and case examples, we identified various energy-efficient retrofit measures, and then examined and evaluated those as applied to the case study of Awas Bhawan (Rajasthan Housing Board Headquarters), Jaipur, India. For the evaluation, we developed a simulation model using EQuest for each energy measure and calculated the resultant energy savings. Then, based on the cost of implementation and the cost of energy saved, we calculated the payback period. Finally, an optimum retrofit solution was formulated with account for the payback period and ease of installation. Results and discussion: The detailed analysis of various energy-efficient retrofit measures as applied to the case study indicates that the most feasible options for retrofit resulting in optimum energy savings with short payback periods include passive architecture measures and equipment upgrades.

Study on Determination of Best Window-Wall Ratio of Office Building in Cold Area

2012 ◽  
Vol 260-261 ◽  
pp. 209-216 ◽  
Author(s):  
Zhi Hua Zhou ◽  
Shan Hu ◽  
Tao Du
Keyword(s):  
Heat Transfer ◽  
Energy Consumption ◽  
Northern China ◽  
Office Building ◽  
Lighting Control ◽  
Natural Lighting ◽  
North East ◽  
Lighting Energy ◽  
Heating Load ◽  
Heating Energy Consumption

The cooling and heating load caused by the heat transfer of the window is significantly greater than that caused by the heat transfer of wall because of the large heat transfer coefficient of the window. At the same time, the sun radiate heat through the window into indoor can increase the cooling load and decrease the heating load; the natural lighting enhances, and the lighting energy consumption decreases because of entering sunlight. The paper took a low energy consumption office building in the northern China for example, synthetically analyzed the cooling energy consumption, heating energy consumption and lighting energy consumption of every orientation under the condition of lighting control or no lighting control. The results show that comparing with no lighting control, the energy consumption with lighting control is less. When using lighting control, the best WWR of south, north, east, west are 0.35, 0.3, 0.3, 0.25, respectively; then the building energy saving rate is 8.2%.

scholarly journals Building Energy Performance Analysis after Changing Its Form of Use from an Office to a Residential Building

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 564
Author(s):  
Przemysław Markiewicz-Zahorski ◽  
Joanna Rucińska ◽  
Małgorzata Fedorczak-Cisak ◽  
Michał Zielina
Keyword(s):  
Energy Consumption ◽  
Multinational Corporations ◽  
Energy Demand ◽  
Residential Building ◽  
Energy Performance ◽  
Office Building ◽  
Modern World ◽  
Simultaneous Increase ◽  
The European Union ◽  
Zero Energy

Lowering energy consumption is one of the most important challenges of the modern world. Since the construction sector accounts for 40% of total energy consumption worldwide, the Parliament of the European Union has developed a Directive, according to which all newly designed and thermally upgraded buildings should meet the requirements of almost zero energy demand (nZEBs) from 1 January 2021. At the same time, in Poland, but also in many other countries in the world, there is a growing oversupply of office space in large cities with a simultaneous increase in demand for apartments, which is caused, among other things, by the increase in the share of remote work and the COVID-19 pandemic. Consequently, this is forcing owners to change the use of buildings from office to residential. This article analyses the possibilities of changing the function of an office building to a multi-family residential building. For both functional solutions, a comparative energy analysis was carried out, taking into account different work schedules and the requirements for new buildings with zero energy demand. The analyses have shown that changing the form of use of an office building to a multi-family building without significant financial and technical costs is possible. On the other hand, the reverse change of the form of use is much more difficult and, in many cases, practically impossible. Due to the fact that many offices are now multinational corporations, this issue is global.

Sign in / Sign up

Export Citation Format

Share Document