scholarly journals EXPERIMENTAL AND NUMERICAL STUDY ON COLUMN-FOUNDATION CONNECTION THROUGH EXTERNAL SOCKET

2021 ◽  
Vol 27 (3) ◽  
pp. 162-174
Author(s):  
Haiying Ma ◽  
Minghui Lai ◽  
Xuefei Shi ◽  
Zhen Cao ◽  
Junyong Zhou
Keyword(s):  
Numerical Study ◽  
Highway Bridges ◽  
Experimental Results ◽  
Bridge Foundations ◽  
Construction Time ◽  
Element Analysis ◽  
Bridge Column ◽  
Column Foundation ◽  
Socket Connection ◽  
Connection Design

In practice, bridge foundations and pier columns are usually constructed with cast-in-place concrete. Precast columns are currently widely used in highway bridges in China, which can save construction time and improve concrete quality. The connection between precast bridge columns and the foundation can affect how forces transfer from one to the other. This paper investigates using external sockets to form a connection between the bridge column and foundation. This method can accelerate the bridge construction time with the additional advantages of improving the orientation and creating a large erection tolerance. Two types of connections are presented and tested to investigate the behavior of the column-foundation connections and find a more suitable way to use external socket connections. The experimental results show that the column-foundation connection design satisfies the design requirements. The results also show that roughening the column surface within the external socket is more effective at connecting the column to the foundation when using an external socket compared to attaching a steel plate on the column. The experimental results are validated with a finite element analysis, resulting in a proposal regarding the column-foundation connection behavior as well as design recommendations for the external socket connection.

Experimental and Numerical Study on Holding Power of Rectangular-Shaped Anchors

2018 ◽  
Author(s):  
Kimihiro Toh ◽  
Yusuke Fukumoto ◽  
Takao Yoshikawa
Keyword(s):  
Numerical Study ◽  
Distinct Element ◽  
Estimation Method ◽  
Experimental Results ◽  
Element Analysis ◽  
Holding Power ◽  
Penetration Mechanism ◽  
History Of ◽  
Sea Area ◽  
Marine Floating Structures

This paper discusses the experimental and numerical investigations for the holding power of rectangular-shaped anchors. As the offshore developments are promoted, the mooring systems are often used as the station keeping systems of the marine floating structures. From a viewpoint of the energy consumption, the mechanical mooring systems with anchors are better than the dynamic mooring systems with thrusters. Up to now, however, the research and development regarding the mooring systems with the high holding anchors in the deep sea area, especially more than 500 m in depth, have hardly been carried out in Japan. In most cases, the conventional anchor shapes have experimentally and/or empirically been decided. In addition, only a few studies which relate the numerical analysis to the experimental test have been performed for the holding power. In order to obtain the optimal shape of anchors theoretically, therefore, the purpose of this study is to develop the estimation method for the holding power and to clarify the penetration mechanism of anchors in soil. In this paper, a series of experiments utilizing the small-sized anchor model is conducted. Here, the fluke shape of specimen is modeled by the rectangular flat plate for simplicity. From several experiments varying the geometric characteristics of the anchor model, the experimental results, e.g., the history of the holding power, the penetration depth, and the fluke surface angle at the maximum holding power, are obtained. Furthermore, the numerical simulation to evaluate the holding power is also carried out using the dynamic explicit non-linear finite element analysis (NLFEA) code, LS-DYNA, as well as the in-house distinct element method (DEM) code. From the comparison between the numerical results and the experimental results, the calculation accuracy is verified.

scholarly journals Preliminary Experimental and Numerical Study of Metal Element with Notches Reinforced by Composite Materials

2021 ◽  
Vol 5 (5) ◽  
pp. 134
Author(s):  
Paweł J. Romanowicz ◽  
Bogdan Szybiński ◽  
Mateusz Wygoda
Keyword(s):  
Digital Image Correlation ◽  
Digital Image ◽  
Numerical Study ◽  
Correlation Method ◽  
Industrial Applications ◽  
Experimental Results ◽  
Image Correlation ◽  
Stress Concentrations ◽  
Element Analysis ◽  
Wide Range

The presented study is related to the application of the composite overlays used in order to decrease the effect of the stress concentrations around the cut-outs in structural metal elements. The proposed approach with the application of the digital image correlation extends the recently presented studies. Such structural elements with openings of various shapes have been accommodated for a wide range of industrial applications. These structures exhibit certain stress concentrations which decrease their durability and strength. To restore their strength, various reinforcing overlays can be used. In the present paper, the flat panel structure without and with the composite overlays made of HEXCEL TVR 380 M12/26%/R-glass/epoxy is under the experimental and the numerical study. Particular attention is paid to the investigation of the samples with the rectangular holes, which for smooth rounded corners offer a higher durability than the samples with the circular hole of the same size. The experimental results are obtained for the bare element and are reinforced with composite overlay samples. The experimental results are obtained with the use of the Digital Image Correlation method, while the numerical results are the product of the Finite Element Analysis. In the numerical analysis, the study of the shape, size and fiber orientation in applied overlays is done. The reduction of the stress concentration observed in opening notches has confirmed the effectiveness of the overlay application. In the investigated example, the application of the square composite overlay increased the structure strength even by 25%.

Tire Cornering Simulation Using an Explicit Finite Element Analysis Code

1998 ◽  
Vol 26 (2) ◽  
pp. 109-119 ◽  
Author(s):  
M. Koishi ◽  
K. Kabe ◽  
M. Shiratori
Keyword(s):  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Test System ◽  
Experimental Results ◽  
The Finite Element Method ◽  
Element Analysis ◽  
Explicit Finite Element ◽  
Explicit Finite Element Analysis ◽  
Element Method

Abstract The finite element method has been used widely in tire engineering. Most tire simulations using the finite element method are static analyses, because tires are very complex nonlinear structures. Recently, transient phenomena have been studied with explicit finite element analysis codes. In this paper, the authors demonstrate the feasibility of tire cornering simulation using an explicit finite element code, PAM-SHOCK. First, we propose the cornering simulation using the explicit finite element analysis code. To demonstrate the efficiency of the proposed simulation, computed cornering forces for a 175SR14 tire are compared with experimental results from an MTS Flat-Trac Tire Test System. The computed cornering forces agree well with experimental results. After that, parametric studies are conducted by using the proposed simulation.

scholarly journals Design and analysis of concrete-filled tubular flange girders under combined loading

2021 ◽  
pp. 136943322110015
Author(s):  
Rana Al-Dujele ◽  
Katherine Ann Cashell
Keyword(s):  
Finite Element ◽  
Axial Force ◽  
Failure Modes ◽  
Numerical Study ◽  
Combined Loading ◽  
Torsional Stiffness ◽  
Fe Model ◽  
Combined Effects ◽  
Element Analysis ◽  
Hollow Section

This paper is concerned with the behaviour of concrete-filled tubular flange girders (CFTFGs) under the combination of bending and tensile axial force. CFTFG is a relatively new structural solution comprising a steel beam in which the compression flange plate is replaced with a concrete-filled hollow section to create an efficient and effective load-carrying solution. These members have very high torsional stiffness and lateral torsional buckling strength in comparison with conventional steel I-girders of similar depth, width and steel weight and are there-fore capable of carrying very heavy loads over long spans. Current design codes do not explicitly include guidance for the design of these members, which are asymmetric in nature under the combined effects of tension and bending. The current paper presents a numerical study into the behaviour of CFTFGs under the combined effects of positive bending and axial tension. The study includes different loading combinations and the associated failure modes are identified and discussed. To facilitate this study, a finite element (FE) model is developed using the ABAQUS software which is capable of capturing both the geometric and material nonlinearities of the behaviour. Based on the results of finite element analysis, the moment–axial force interaction relationship is presented and a simplified equation is proposed for the design of CFTFGs under combined bending and tensile axial force.

scholarly journals On Hydromechanical Interaction during Propagation of Localized Damage in Rocks

Minerals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 162
Author(s):  
A.A. Jameei ◽  
S. Pietruszczak
Keyword(s):  
Numerical Study ◽  
Fluid Pressure ◽  
Implicit Time ◽  
Integration Scheme ◽  
Internal Length ◽  
Element Analysis ◽  
Equivalent Permeability ◽  
Mechanical Coupling ◽  
Splitting Test ◽  
Localized Damage

This paper provides a mathematical description of hydromechanical coupling associated with propagation of localized damage. The framework incorporates an embedded discontinuity approach and addresses the assessment of both hydraulic and mechanical properties in the region intercepted by a fracture. Within this approach, an internal length scale parameter is explicitly employed in the definition of equivalent permeability as well as the tangential stiffness operators. The effect of the progressive evolution of damage on the hydro-mechanical coupling is examined and an evolution law is derived governing the variation of equivalent permeability with the continuing deformation. The framework is verified by a numerical study involving 3D simulation of an axial splitting test carried out on a saturated sample under displacement and fluid pressure-controlled conditions. The finite element analysis incorporates the Polynomial-Pressure-Projection (PPP) stabilization technique and a fully implicit time integration scheme.

scholarly journals Estimating Deterioration in the Concrete Tie-Ballast Interface Based on Vertical Tie Deflection Profile: A Numerical Study

2016 ◽  
Author(s):  
Hailing Yu
Keyword(s):  
Direct Detection ◽  
Numerical Study ◽  
Interface Condition ◽  
Vertical Deflection ◽  
Cohesive Elements ◽  
Material Loss ◽  
Element Analysis ◽  
Cross Sectional ◽  
Technical Requirements ◽  
Support Conditions

In ballasted concrete tie track, the tie-ballast interface can deteriorate resulting in concrete tie bottom abrasion, ballast pulverization and/or voids in tie-ballast interfaces. Tie-ballast voids toward tie ends can lead to unfavorable center binding support conditions that can result in premature concrete tie failure and possible train derailment. Direct detection of these conditions is difficult. There is a strong interest in assessing the concrete tie-ballast interface conditions indirectly using measured vertical deflections. This paper seeks to establish a link between the vertical deflection profile of a concrete tie top surface and the tie-ballast interface condition using the finite element analysis (FEA) method. The concrete tie is modeled as a concrete matrix embedded with prestressing steel strands or wires. The configurations of two commonly used concrete ties, one with 8 prestressing strands and the other with 20 prestressing wires, are employed in this study. All models are three-dimensional and symmetric about the tie center. A damaged plasticity model that can predict onset and propagation of tensile cracks is applied to the concrete material. The steel-concrete interface is homogenized and represented with a thin layer of cohesive elements sandwiched between steel and concrete elements. Strand- or wire-specific elasto-plastic bond models developed at the Volpe Center are applied to the cohesive elements to account for the interface bonding mechanisms. FE models are developed for both original and worn concrete ties, with the latter assuming hypothetical patterns of reduced cross sections resulting from abrasive interactions with the ballast. Static analyses of pretension release in these concrete ties are conducted, and vertical deflection gradients along tie lengths are calculated and shown to correspond well with the worn cross sectional patterns for a given reinforcement type. The ballast is further modeled with Extended Drucker-Prager plasticity, and hypothetical voids are applied toward the tie ends along the concrete tie-ballast interface to simulate center binding support conditions. The distance range over which the concrete tie is supported in the center is variable and yields different center binding severity. Static simulations are completed with vertical rail seat loads applied on the concrete tie-ballast assembly. The influences of various factors on the vertical deflection profile, including tie type, vertical load magnitude, center binding severity, cross sectional material loss and prestress loss, are examined based on the FEA results. The work presented in this paper demonstrates the potential of using the vertical deflection profile of concrete tie top surfaces to assess deteriorations in the tie-ballast interface. The simulation results further help to clarify minimum technical requirements on inspection technologies that measure concrete tie vertical deflection profiles.

Effects of Wind on the Heat Flow of FPSO Topsides Subject to Fire: An Experimental and Numerical Study

2010 ◽  
Author(s):  
Joon Young Yoon ◽  
Seong Hwan Kim ◽  
Gwon Cheol Yu ◽  
Jung Kwan Seo ◽  
Bong Ju Kim ◽  
...  
Keyword(s):  
Thermal Diffusion ◽  
Numerical Study ◽  
Wind Tunnel Test ◽  
Experimental Results ◽  
Test Facility ◽  
Test Model ◽  
Cfd Simulations ◽  
Fire Engineering ◽  
Diffusion Characteristics ◽  
Fire Loads

The aim of this paper is to examine the effect of wind on the thermal diffusion characteristics of floating production storage and offloading (FSPO) topside models subject to fire. It is motivated by the need to identify the fire loads on FPSO topsides, taking into account the effects of wind speed and direction. The results of an experimental and numerical study undertaken for these purposes are reported here. This paper is part of Phase II of the joint industry project on explosion and fire engineering of FPSOs (EFEF JIP) [1]. An experiment was performed on a 1/14-scale FPSO topside model using a wind tunnel test facility. The locations of the heat source of the fire were varied, as were the speed and direction of the wind, and the temperature distribution was measured. Computational fluid dynamics (CFD) simulations using the ANSYS CFX program were performed on the test model, with the results obtained compared with the experimental results. It is concluded that wind has a significant effect on the thermal diffusion characteristics of the test model and that the CFD simulations are in good agreement with the experimental results. The insights developed in this study will be very useful for the fire engineering of FPSO topsides.

Experimental, numerical and parametric studies on stress concentration factors of T-joints under tension

2021 ◽  
pp. 136943322110499
Author(s):  
Feleb Matti ◽  
Fidelis Mashiri
Keyword(s):  
Finite Element ◽  
Stress Concentration ◽  
Numerical Study ◽  
Hot Spot ◽  
Joint Models ◽  
Element Analysis ◽  
T Joints ◽  
Concentration Factors ◽  
Stress Concentration Factors ◽  
Good Agreement

This paper investigates the behaviour of square hollow section (SHS) T-joints under static axial tension for the determination of stress concentration factors (SCFs) at the hot spot locations. Five empty and corresponding concrete-filled SHS-SHS T-joint connections were tested experimentally and numerically. The experimental investigation was carried out by attaching strain gauges onto the SHS-SHS T-joint specimens. The numerical study was then conducted by developing three-dimensional finite element (FE) T-joint models using ABAQUS finite element analysis software for capturing the distribution of the SCFs at the hot spot locations. The results showed that there is a good agreement between the experimental and numerical SCFs. A series of formulae for the prediction of SCF in concrete-filled SHS T-joints under tension were proposed, and good agreement was achieved between the maximum SCFs in SHS T-joints calculated from FE T-joint models and those from the predicted formulae.

Thermal Management of Surface Mount Power Magnetic Components

1999 ◽  
Vol 122 (4) ◽  
pp. 323-327
Author(s):  
G. Refai-Ahmed ◽  
M. M. Yovanovich
Keyword(s):  
Heat Transfer ◽  
Power Loss ◽  
Numerical Study ◽  
Lower Surface ◽  
Experimental Results ◽  
Surface Mount ◽  
Conduction Heat Transfer ◽  
Magnetic Components ◽  
Underfill Material ◽  
Good Agreement

A numerical and experimental study of conduction heat transfer from low power magnetic components with gull wing leads was conducted to determine the effects of distributing the power loss between the core, the winding and the thermal underfill on the thermal resistance. The numerical study was conducted in the power loss ratio range of 0.5⩽PR⩽1.0, where the only active power loss was from the winding at PR=1. In addition, the effect of the thermal underfill material between the substrate and the lower surface of the magnetic package on the thermal performance of the magnetic device was also examined. For comparison, a test was conducted on a magnetic component at PR=1, without thermal underfill. This comparison revealed good agreement between the numerical and experimental results. Finally, a general model was proposed for conduction heat transfer from the surface mount power magnetic packages. The agreement between the model and the experimental results was within 8 percent. [S1043-7398(00)00704-0]

scholarly journals Modeling of Size Effects in Bending of Perforated Cosserat Plates

2017 ◽  
Vol 2017 ◽  
pp. 1-19 ◽  
Author(s):  
Roman Kvasov ◽  
Lev Steinberg
Keyword(s):  
Finite Element ◽  
Stress Concentration ◽  
Numerical Study ◽  
The Finite Element Method ◽  
Classical Elasticity ◽  
Element Analysis ◽  
Plate Deformation ◽  
The Finite Element Analysis ◽  
Circular Holes ◽  
Different Shapes

This paper presents the numerical study of Cosserat elastic plate deformation based on the parametric theory of Cosserat plates, recently developed by the authors. The numerical results are obtained using the Finite Element Method used to solve the parametric system of 9 kinematic equations. We discuss the existence and uniqueness of the weak solution and the convergence of the proposed FEM. The Finite Element analysis of clamped Cosserat plates of different shapes under different loads is provided. We present the numerical validation of the proposed FEM by estimating the order of convergence, when comparing the main kinematic variables with an analytical solution. We also consider the numerical analysis of plates with circular holes. We show that the stress concentration factor around the hole is less than the classical value, and smaller holes exhibit less stress concentration as would be expected on the basis of the classical elasticity.

Sign in / Sign up

Export Citation Format

Share Document