Aging Suit

2018 ◽  
pp. 56-69
Author(s):  
Annika Maya Rivero
Keyword(s):  
Latin America ◽  
Low Cost ◽  
Social Aspects ◽  
Manufacturing Cost ◽  
Functional Aspect ◽  
Population Pyramid ◽  
Design Students ◽  
Physical Capacities ◽  
Elder People ◽  
Elder Population

The population pyramid is being inverted and the designers are facing challenges in the way they design products, spaces, and services for elder people. Although the design is composed of both cultural and social aspects, the functional aspect takes relevance for autonomy and empowerment of the person that gets older. To design products centered on the physical capacities of the elder population, the aging suit has being used as a tool for the gerontodesign. In countries like Mexico, its application is limited by the manufacturing cost. For this reason, as part of a design methodology for elder people, a low-cost suit was developed focus on the design students and professionals located in Latin America.

scholarly journals Genetic epidemiology of BRCA1- and BRCA2-associated cancer across Latin America

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Josef S. Herzog ◽  
Yanin Chavarri-Guerra ◽  
Danielle Castillo ◽  
Julio Abugattas ◽  
Cynthia Villarreal-Garza ◽  
...  
Keyword(s):  
Latin America ◽  
Latin American ◽  
Cancer Genomics ◽  
Low Cost ◽  
Probability Model ◽  
Copy Number Variant ◽  
Research Network ◽  
Community Research ◽  
Brca1 And Brca2 ◽  
Pathogenic Variants

AbstractThe prevalence and contribution of BRCA1/2 (BRCA) pathogenic variants (PVs) to the cancer burden in Latin America are not well understood. This study aims to address this disparity. BRCA analyses were performed on prospectively enrolled Latin American Clinical Cancer Genomics Community Research Network participants via a combination of methods: a Hispanic Mutation Panel (HISPANEL) on MassARRAY; semiconductor sequencing; and copy number variant (CNV) detection. BRCA PV probability was calculated using BRCAPRO. Among 1,627 participants (95.2% with cancer), we detected 236 (14.5%) BRCA PVs; 160 BRCA1 (31% CNVs); 76 BRCA2 PV frequency varied by country: 26% Brazil, 9% Colombia, 13% Peru, and 17% Mexico. Recurrent PVs (seen ≥3 times), some region-specific, represented 42.8% (101/236) of PVs. There was no ClinVar entry for 14% (17/125) of unique PVs, and 57% (111/196) of unique VUS. The area under the ROC curve for BRCAPRO was 0.76. In summary, we implemented a low-cost BRCA testing strategy and documented a significant burden of non-ClinVar reported BRCA PVs among Latin Americans. There are recurrent, population-specific PVs and CNVs, and we note that the BRCAPRO mutation probability model performs adequately. This study helps address the gap in our understanding of BRCA-associated cancer in Latin America.

From a Seed to a Need: the Growth of Shape Memory Applications in Europe.

1991 ◽  
Vol 246 ◽  
Author(s):  
Ir. J. Van Humbeeck
Keyword(s):  
Shape Memory ◽  
Low Cost ◽  
Marketing Research ◽  
Research Approach ◽  
Manufacturing Cost ◽  
Product Price ◽  
Key Factor ◽  
Place Promotion ◽  
Memory Applications ◽  
The Cost

AbstractA more systematic marketing research approach has finally revealed good ideas anticipating a market need for the use of shape memory alloys. The success of those new ideas, prototypes and applications are analysed in terms of “the value of the function”, defined as the importance of the function divided by the cost of providing the function. A high importance and/or a low cost of the function are thus the basic requirements for the successful introduction of shape memory applications. Attention is also paid to the way how the 4 P's, product, price, place, promotion (the marketing mix) are applied by the European companies. Those different items will be illustrated on the basis of some small-, medium- and largescale applications, used in different markets. “to the point research”, fundamental and applied, on material properties as well as on manufacturing (cost reduction) is being discussed as the key factor to increase the function value.

scholarly journals Developing a lab-in-a-box and low-cost paper-based sensors for ZIKV and CHIKV diagnosis in Latin America

2021 ◽  
Author(s):  
Margot Karlikow ◽  
Severino Silva ◽  
Yuxiu Guo ◽  
Seray Cicek ◽  
Larissa Krokovsky ◽  
...  
Keyword(s):  
Latin America ◽  
Low Cost

scholarly journals Latin American Journalism: A Review of Five Decades and a Proposal for a Model of Analysis

Comunicar ◽  
2009 ◽  
Vol 17 (33) ◽  
pp. 193-201 ◽  
Author(s):  
Claudia Mellado-Ruiz
Keyword(s):  
Latin America ◽  
Latin American ◽  
Professional Practice ◽  
Historical Analysis ◽  
The United States ◽  
Cultural Value ◽  
Social Aspects ◽  
American Journalism ◽  
The Common ◽  
The Individual

Based on an historical analysis of the last five decades of research, this article analyzes the elements that define the journalism in Latin America. The work is based on the common social structures and the fact that journalism mediates in the construction of reality throughout the region, proposing a model that describes the individual, organizational and social aspects that have influenced the development of the profession. The results indicate that the educational problems linked to both the identity and the autonomy of the profession, the cultural value associated to professional practice, the existence and reach of the Teachers Associations, political and economic peculiarities, and the considerable influence exercised by Europe and the United States, are all aspects that make Latin American journalism different journalism in the rest of the world. Still, despite these similarities, neither a shared conceptualization nor a homologated operationalization of the profession exists in Latin America.En base a un recorrido histórico de las últimas cinco décadas, este artículo analiza los elementos que hoy definen a la profesión periodística en Latinoamérica. El trabajo se sostiene en las estructuras sociales compartidas por la región, así como en la función de mediación que el periodismo cumple en la construcción de la realidad, proponiendo un modelo que describe los aspectos individuales, organizacionales y sociales que han influido en su desarrollo. Se concluye que los problemas de formación vinculados a la identidad y a la autonomía de la profesión, el valor cultural dado a la carrera profesional, la existencia y alcance de los colegios profesionales, las peculiaridades políticas y económicas, y la gran influencia extranjera ejercida por Europa y EEUU, son los aspectos que diferencian al periodismo latinoamericano del resto del mundo. Sin embargo, se plantea la inexistencia de una conceptualización y operacionalización homologada de la profesión en el sub-continente.

scholarly journals Embedded real-time system for detecting leakage of the gas used in iraqi kitchens

2019 ◽  
Vol 14 (3) ◽  
pp. 1171
Author(s):  
Husam Kareem
Keyword(s):  
Real Time ◽  
Energy Efficient ◽  
Low Cost ◽  
Manufacturing Cost ◽  
Liquefied Petroleum Gas ◽  
Time System ◽  
Real Time System ◽  
Gas Leakage ◽  
The People ◽  
Leakage Location

<p>A major issue that happens in kitchens of houses and/or restaurants is the leakage of gas used as a fuel for cooker stove, which is commonly referred to as LPG (liquefied petroleum gas). LPG leakage may lead to a serious fire or even a deadly explosion that might affect the surrounding people. A substantial solution to avoid such disasters is by stopping its main cause. Therefore designing a device capable of monitoring and detecting such gases can minimize the dangerous and unwanted incidents by LPG leakage. This paper introduces a low cost and energy efficient real-time monitoring system that able to sense different dangerous gases, specifically those used for stove cooker. This system considers the pros of the previously introduced systems and fixes the cons available in those systems. In addition, the manufacturing cost has been taken into consideration. If the system senses any type of LPG gas (there is a gas leakage), it will react by making three different actions. It will make an alert sound to notify the people around the leakage place, send an SMS to two cell phones, and show, on an LCD screen, the leakage location.</p>

scholarly journals A Comprehensive 3D-Molded Bone Flap Protocol for Patient-Specific Cranioplasty

2021 ◽  
Author(s):  
Raphael Bertani ◽  
Caio Moreno Perret Novo ◽  
Pedro Henrique Freitas ◽  
Amanda Amorin Nunes ◽  
Thiago Nunes Palhares ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Low Cost ◽  
Selective Laser Sintering ◽  
Operating Time ◽  
Ct Scanning ◽  
Patient Specific ◽  
Manufacturing Cost ◽  
Post Processing ◽  
Cross Sectional ◽  
Cranial Defect

Abstract We present a detailed step-by-step approach for the low-cost production and surgical implantation of cranial prostheses, aimed at restoring aesthetics, cerebral protection, and facilitating neurological rehabilitation. This protocol uses combined scan computed tomography (CT) cross-sectional images, in DICOM format, along with a 3D printing (additive manufacturing) setup. The in-house developed software InVesalius®️ is an open-source tool for medical imaging manipulation. The protocol describes image acquisition (CT scanning) procedures, and image post-processing procedures such as image segmentation, surface/volume rendering, mesh generation of a 3D digital model of the cranial defect and the desired prostheses, and their preparation for use in 3D printers. Furthermore, the protocol describes a detailed powder bed fusion additive manufacturing process, known as Selective Laser Sintering (SLS), using Polyamide (PA12) as feedstock to produce a 3-piece customized printed set per patient. Each set consists of a “cranial defect printout” and a “testing prosthesis” to assemble parts for precision testing, and a cranial “prostheses mold” in 2 parts to allow for the intraoperative modeling of the final implant cast using the medical grade Poly(methyl methacrylate) (PMMA) in a time span of a few min. The entire 3D processing time, including modelling, design, production, post-processing and qualification, takes approximately 42 h. Modeling the PMMA flap with a critical thickness of 4 mm by means of Finite Element Method (FEM) assures mechanical and impact properties to be slightly weaker than the bone tissue around it, a safety design to prevent fracturing the skull after a possible subsequent episode of head injury. On a parallel track, the Protocol seeks to provide guidance in the context of equipment, manufacturing cost and troubleshooting. Customized 3D PMMA prostheses offers a reduced operating time, good biocompatibility, and great functional and aesthetic outcomes. Additionally, it offers greater than 15-fold cost advantage over the usage of other materials, including metallic parts produced by additive manufacturing.

Energy Absorption Characteristics of Passenger Car With Origami Structure

2021 ◽  
Author(s):  
Yang Yang ◽  
Xilu Zhao ◽  
Ichiro Hagiwara
Keyword(s):  
Low Cost ◽  
Peak Load ◽  
Manufacturing Cost ◽  
Molding Method ◽  
Partial Heating ◽  
Vehicle Structure ◽  
Energy Absorbers ◽  
Real Vehicle ◽  
Initial Peak ◽  
Absorption Characteristics

Abstract In the crash collision, the vehicle energy absorbers play an important role in the energy absorbed performance. Current vehicle energy absorbers have two defects during collision, such as only 70 % collapsed in its length and high initial peak load. It is because present energy absorbed column is the most primitive from the point of Origami structure. We developed the column so called Reversed Spiral Origami Structure; RSO which solves these 2 defects. However, for RSO, the manufacturing cost of hydroforming in the existing technology is too expensive to be applied in real vehicle structure. To address the problems, we have developed a new molding method called “Partial-heating torsion molding method”. And we have developed RTO (Reversed Torsion Origami Structure) by this new molding method at a very low cost. We show this RTO also solves the two defects of the present vehicle absorbers by not only simulation but also experiments. This structure is possible to replace conventional energy absorbers and it is expected to be widely used such as not only in automobile structures but also in building ones.

scholarly journals ClothSurface: Exploring a Low-Cost Prototyping Tool to Support Ideation for Shape Displays

2019 ◽  
Vol 3 (3) ◽  
pp. 64
Author(s):  
Jeffrey C. F. Ho
Keyword(s):  
User Interfaces ◽  
Design Space ◽  
Low Cost ◽  
Limited Resources ◽  
Technical Knowledge ◽  
Relevant Research ◽  
Physical Form ◽  
Sophisticated Equipment ◽  
Design Students ◽  
Tools And Methods

A shape-changing user interface is a type of interface that interacts with users by changing its physical form. Although researchers have been extensively studying shape-changing user interfaces, relevant research on its various design aspects—including tools and methods—remains limited. Prototyping shape-changing interfaces often requires sophisticated equipment and knowledge, which makes this sphere of design unwelcoming for designers with limited resources and technical knowledge (e.g., design students). In this study, we propose ClothSurface—a simple and low-cost prototyping tool to design for shape displays—and explore its use through a series of design sessions. The results reveal that ClothSurface can allow inexperienced designers to illustrate their ideas and to explore the design space of shape displays.

scholarly journals Design of Transparent Metasurfaces Based on Asymmetric Nanostructures for Directional and Selective Absorption

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3751
Author(s):  
Dong Wu ◽  
Yang Meng ◽  
Chang Liu
Keyword(s):  
Solar Radiation ◽  
Energy Saving ◽  
Noble Metals ◽  
Near Infrared ◽  
Low Cost ◽  
Infrared Light ◽  
Manufacturing Cost ◽  
Selective Absorption ◽  
Metal Insulator Metal ◽  
Peak Value

Maximizing the solar heat gain through windows in winter and minimizing the solar radiation entering the room in summer are of great significance for the energy saving of buildings. Here, we present a new idea for transparent metasurfaces, based on asymmetric metal/insulator/metal (MIM) nanostructures, which can be switched back and forth between absorbing and reflecting solar radiation by reversing the sample orientation. Owing to the fundamental mode of a low-quality-factor resonance, a selective near-infrared absorption is obtained with an absorption peak value of 90% upon front illumination. The average solar absorption (45%) is about 10% higher than that (35%) of reported transparent absorbers. The near-infrared light is also strongly and selectively reflected upon back illumination and a reflection peak value above 70% is observed. Meanwhile, the average visible transmission of the metasurface is above 60%, which is about 1.6 times that (36%) of previous transparent metasurface absorbers. In addition, Cu material can replace the noble metals in this work, which will greatly reduce the manufacturing cost. Owing to the attractive properties of directional and selective absorption, passive operation mode, and low cost of the materials, the metasurfaces have promising prospects in building energy saving or other solar applications where surface transparency is desirable.

Sign in / Sign up

Export Citation Format

Share Document