Are the Pre-Diffusion Phases Shortening?

2010 ◽  
pp. 36-52
Author(s):  
J. R. Ortt
Keyword(s):  
Research And Development ◽  
Large Scale ◽  
High Tech ◽  
Scale Production ◽  
Large Scale Production ◽  
First Time ◽  
And Diffusion ◽  
Over Time

This chapter focuses on the pre-diffusion phases for high-tech products. These phases last from the first time a technology is mastered and demonstrated up to the start of the large-scale production and diffusion of products based on that technology. The purpose of this chapter is to underline the managerial relevance of the pre-diffusion phases. Two questions will be answered in particular: (1) How long do these pre-diffusion phases last for high-tech products? (2) Have these phases shortened or not over the last 150 years? Fifty-three cases of high-tech products, invented between 1837 and 1998, are investigated. The pre-diffusion phases are shown to last 16 years on average, but their length varies considerably per case. No proof for the shortening of these phases over time is found. The resources devoted to research and development in different fields of expertise may have increased but the length of the pre-diffusion phases has not shortened accordingly.

scholarly journals The Synthesis of Peculiar Structure of Springlike Multiwall Carbon Nanofibers/Nanotubes via Mechanothermal Method

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Sahebali Manafi ◽  
Mohammad Reza Rahimipour ◽  
Iman Mobasherpour ◽  
Atefeh Soltanmoradi
Keyword(s):  
Carbon Nanofibers ◽  
Large Scale ◽  
Annealing Temperature ◽  
Milling Time ◽  
Nanocomposite Materials ◽  
Scale Production ◽  
Multiwalled Carbon ◽  
Large Scale Production ◽  
First Time ◽  
Multiwall Carbon

Mechanothermal (MT) method is one of the methods used for large-scale production of carbon nanotubes/nanofibers. The different peculiar morphologies of carbon allotropes are introduced with an extraordinary structure for the first time by MT method. In this paper, the influence of milling time and annealing temperature on the crystallinity and morphology of the synthesized nanopowders was investigated. Surprisingly, in this investigation, we report the synthesis of springlike multiwalled carbon nanofibers (S-MWCNFs) by a two-step annealing of milled graphite in an Ar atmosphere. On the other hand, the MT method could be used for the preparation of suitable structures with applications in nanocomposite materials, which is an important task in the era of nanotechnology.

scholarly journals Novel Green Synthesis of Graphene Layers using Zante Currants and Graphene Oxide

2018 ◽  
Vol 34 (6) ◽  
pp. 2832-2837 ◽  
Author(s):  
Mohd Zaid Ansari ◽  
Mohammad Nadeem Lone ◽  
Shabana Sajid ◽  
Weqar Ahmad Siddiqui
Keyword(s):  
Graphene Oxide ◽  
Large Scale ◽  
Uv Spectrophotometry ◽  
Scale Production ◽  
Graphene Layers ◽  
Large Scale Production ◽  
Reduced Graphene ◽  
Reduction Effect ◽  
First Time ◽  
Facile Route

The present work shows a facile route for the preparation of graphene layers and for the first time Zante currants extract used for the effective deoxygenation of graphene oxide has been reported. Zante currants (ZC) extract reduce effectively GO into few layered structures of graphene (FLG). The morphology of few layers graphene and graphene oxide (GO) were investigated by SEM and TEM. Reduction effect on graphene oxide confirm by other technique like Raman, FTIR, XRD and UV spectrophotometry. This procedure keep away the use of hazardous chemicals, thus providing a new hope for large scale production of chemically reduced graphene.

PROPAGATION AND PRODUCTION OF GAC (MOMORDICA COCHINCHINENSIS SPRENG.), A GREENHOUSE CASE STUDY

2012 ◽  
Vol 49 (2) ◽  
pp. 234-243 ◽  
Author(s):  
SOPHIE E. PARKS ◽  
CARLY T. MURRAY ◽  
DAVID L. GALE ◽  
BASEM AL-KHAWALDEH ◽  
LORRAINE J. SPOHR
Keyword(s):  
Large Scale ◽  
Scale Production ◽  
Large Scale Production ◽  
Momordica Cochinchinensis ◽  
Increasing Demand ◽  
Potential Methods ◽  
Enhancing Production ◽  
First Time ◽  
Male To Female

SUMMARYGreater cultivation of the underutilised Gac fruit, Momordica cochinchinensis, by poorly resourced householders and farmers would potentially improve livelihoods, and, on a larger scale, meet the increasing demand for Gac as a health product. Cultivation methods need to be developed to suit small- and large-scale production and must consider the unpredictable ratio of male to female plants grown from seed, and slow growth induced by cool temperatures. In this study, we examined the responses of Gac to propagation and protected cropping techniques to identify potential methods for increasing production. Plants germinated from seed in seed-raising mix under warm and humid conditions were grown hydroponically to maturity in a climate-controlled greenhouse during a temperate winter, producing fruits that were harvested ripe, from 44 weeks after sowing. Cuttings taken from female plants were dipped in indole-3-butyric rooting hormone powder or gel, or were left untreated, and then placed in rock wool, potting mix, water or closed media sachet. All treatment combinations, with the exception of the untreated potting mix, permitted the development of healthy plants in a second greenhouse crop. Growing plants from seed, then vegetatively increasing the number of productive female plants by cuttings is a means to increase Gac production with limited resources. Gac production using greenhouse technology, as described here for the first time, is relevant to other temperate regions. The finding that larger fruits have a higher percentage of edible aril than smaller fruits provides a new area of investigation towards enhancing production.

scholarly journals Mitigating Quantization Lobes in mmWave Low-bit Reconfigurable Reflective Surfaces

2020 ◽  
Author(s):  
Panagiotis Theofanopoulos ◽  
Bharath Kashyap ◽  
Yiran Cui ◽  
Georgios Trichopoulos
Keyword(s):  
Large Scale ◽  
Optical Measurement ◽  
Random Phase ◽  
Single Layer ◽  
Scale Production ◽  
Low Loss ◽  
Large Scale Production ◽  
First Time ◽  
Phase Randomization ◽  
Reflective Surfaces

We present a method for the mitigation of quantization lobes in single-bit reconfigurable reflective surfaces (RRSs). Typically, RRSs are planar beamforming structures consisting of hundreds or thousands of antennas with integrated tunable switches. Under plane-wave illumination, single-bit RRSs suffer from undesired side lobes or quantization lobes, which are caused by the periodicity of the errors due to the limited number of bits used in phase quantization. In this work, we present a topology that suppresses the quantization lobes using single-layer, 1-bit RRSs, by implementing a fixed but random phase delay in every unit-cell. The introduction of phase randomization breaks the periodicity of the quantization errors, thus reducing the quantization lobe level (QLL). We carry out a theoretical analysis to demonstrate the effect of phase randomization in RRSs, and for the first time, provide the condition for choosing the range of randomization required to achieve the lowest sidelobe level (SLL). Leveraging this condition, we design a single-layer, 1-bit 30×30 randomized RRS at 222.5 GHz. The reflective surface is fabricated on a thin, low-loss alumina ribbon ceramic wafer from Corning Inc. using a simplified fabrication technique suitable for large-scale production of mmWave/THz RRSs. Finally, we present the radar cross-section (RCS) characterization results obtained from a quasi-optical measurement setup validating the mitigation of quantization lobes using the proposed randomization technique.

scholarly journals A Facile Synthesis of (PIM-Polyimide)- (6FDA-Durene-Polyimide) Copolymer as Novel Polymer Membranes for CO2 Separation

2019 ◽  
Author(s):  
Iqubal Hossain ◽  
Abu Zafar Al Munsur ◽  
Tae-Hyun Kim
Keyword(s):  
Gas Separation ◽  
Large Scale ◽  
Thermomechanical Properties ◽  
Random Copolymers ◽  
Separation Performance ◽  
Scale Production ◽  
Large Scale Production ◽  
One Step ◽  
First Time ◽  
Gas Separation Performance

Random copolymers made of both (PIM-polyimide) and (6FDA-durene-PI) were prepared for the first time by a facile one-step polycondensation reaction. By combining the highly porous and contorted structure of PIM (polymers with intrinsic microporosity) and high thermomechanical properties of PI (polyimide), the membranes obtained from these random copolymers [(PIM-PI)x-(6FDA-durene-PI)y] showed high CO2 permeability (> 1047 Barrer) with moderate CO2/N2 (> 16.5) and CO2/CH4 (> 18) selectivity, together with excellent thermal and mechanical properties. The membranes prepared from three different compositions of two comonomers (1:4, 1:6 and 1:10 of x:y), all showed similar morphological and physical properties, and gas separation performance, indicating ease of synthesis and practicability for large-scale production. The gas separation performance of these membranes at various pressure ranges (100–1500 torr) was also investigated.

Study on embryonic and larval developmental stages of Sucker head Garra gotyla (Gray 1830; Teleostei; Cyprinidae)

Zygote ◽  
2020 ◽  
Vol 28 (5) ◽  
pp. 349-359
Author(s):  
Rabindar Singh Patiyal ◽  
Mohammad Iqbal Mir ◽  
Nityanand Pandey ◽  
M. Rajesh ◽  
Debajit Sarma ◽  
...  
Keyword(s):  
Large Scale ◽  
Developmental Stages ◽  
Fertilization Rate ◽  
Whole Body ◽  
Hatching Rate ◽  
Scale Production ◽  
Large Scale Production ◽  
Complete Absorption ◽  
First Time ◽  
Perivitelline Membrane

SummaryGarra gotyla is an indigenous coldwater fish of the cyprinid family and has wide geographical distribution in India as well as in other countries of Asia and Africa. Induced breeding in G. gotyla was carried out successfully for the first time and an attempt has been made to document developmental stages chronologically from the first minute of fertilization, through all stages of embryonic development until the fifth day post hatching. This experiment was carried out at 22–24°C water temperature at the Directorate of Coldwater Fisheries Research, Bhimtal, India. During the breeding trial, the fertilization rate was observed as 70–75% and hatching rate was 85–90%. The mature fertilized ova were measured as 0.8–1.0 mm in diameter and the perivitelline membrane became thick soon after fertilization and formation of the germ pole. The periods taken for complete developmental stages were recorded; cleavage stage 111 min (min post fertilization (pf)), blastulation stage 580 min (pf), neurulation and segmentation 1250 min (pf) and hatching was completed after 1420 min. The sac fry was measured as 3 mm in length and took almost 3 days for complete absorption of the yolk content. The major structural and differential changes observed are in head, tail, fins, alimentary canal, rudiments of each organ and appearance of melanophore pigmentation in the whole body. The 5-day-old larvae were measured as 6 mm in length with almost every organ fully differentiated. The present study will be utilized for large-scale production of fingerlings for stock enhancement in rivers, lakes and possibilities of genetic improvement and manipulation at the embryonic stage.

scholarly journals Mitigating Quantization Lobes in mmWave Low-bit Reconfigurable Reflective Surfaces

2020 ◽  
Author(s):  
Panagiotis Theofanopoulos ◽  
Bharath Kashyap ◽  
Yiran Cui ◽  
Georgios Trichopoulos
Keyword(s):  
Large Scale ◽  
Optical Measurement ◽  
Random Phase ◽  
Single Layer ◽  
Scale Production ◽  
Low Loss ◽  
Large Scale Production ◽  
First Time ◽  
Phase Randomization ◽  
Reflective Surfaces

We present a method for the mitigation of quantization lobes in single-bit reconfigurable reflective surfaces (RRSs). Typically, RRSs are planar beamforming structures consisting of hundreds or thousands of antennas with integrated tunable switches. Under plane-wave illumination, single-bit RRSs suffer from undesired side lobes or quantization lobes, which are caused by the periodicity of the errors due to the limited number of bits used in phase quantization. In this work, we present a topology that suppresses the quantization lobes using single-layer, 1-bit RRSs, by implementing a fixed but random phase delay in every unit-cell. The introduction of phase randomization breaks the periodicity of the quantization errors, thus reducing the quantization lobe level (QLL). We carry out a theoretical analysis to demonstrate the effect of phase randomization in RRSs, and for the first time, provide the condition for choosing the range of randomization required to achieve the lowest sidelobe level (SLL). Leveraging this condition, we design a single-layer, 1-bit 30×30 randomized RRS at 222.5 GHz. The reflective surface is fabricated on a thin, low-loss alumina ribbon ceramic wafer from Corning Inc. using a simplified fabrication technique suitable for large-scale production of mmWave/THz RRSs. Finally, we present the radar cross-section (RCS) characterization results obtained from a quasi-optical measurement setup validating the mitigation of quantization lobes using the proposed randomization technique.

I. S. A. Baud. Forms of Production and Women's Labour: Gender Aspects of Industrialisation in India and Mexico. New Delhi: Sage Publications. 1992. 321 pp.Hardbound. Price: Indian Rs 295.00.

1993 ◽  
Vol 32 (1) ◽  
pp. 129-131
Author(s):  
Naureen Talha
Keyword(s):  
Large Scale ◽  
Indian Society ◽  
New Delhi ◽  
Scale Production ◽  
Female Labour ◽  
Self Employment ◽  
Commodity Production ◽  
Large Scale Production ◽  
Mexican Society ◽  
Small Production

The literature on female labour in Third World countries has become quite extensive. India, being comparatively more advanced industrially, and in view of its size and population, presents a pictures of multiplicity of problems which face the female labour market. However, the author has also included Mexico in this analytical study. It is interesting to see the characteristics of developing industrialisation in two different societies: the Indian society, which is conservative, and the Mexican society, which is progressive. In the first chapter of the book, the author explains that he is not concerned with the process of industrialisation and female labour employed at different levels of work, but that he is interested in forms of production and women's employment in large-scale production, petty commodity production, marginal small production, and self-employment in the informal sector. It is only by analysis of these forms that the picture of females having a lower status is understood in its social and political setting.

An Efficient and Improved Process for the Synthesis of Itopride Hydrochloride and Trimethobenzamide Hydrochloride

2018 ◽  
Vol 15 (4) ◽  
pp. 572-575 ◽  
Author(s):  
Ponnusamy Kannan ◽  
Samuel I.D. Presley ◽  
Pallikondaperumal Shanmugasundaram ◽  
Nagapillai Prakash ◽  
Deivanayagam Easwaramoorthy
Keyword(s):  
Large Scale ◽  
Hydroxylamine Hydrochloride ◽  
Scale Production ◽  
One Pot ◽  
Hydrochloride Salt ◽  
Environmental Friendly ◽  
Large Scale Production ◽  
Non Ulcer Dyspepsia ◽  
Itopride Hydrochloride ◽  
Yield And Purity

Aim and Objective: Itopride is a prokinetic agent used for treating conditions like non-ulcer dyspepsia. Itopride is administered as its hydrochloride salt. Trimethobenzamide is used for treating nausea and vomiting and administered as its hydrochloride salt. The aim is to develop a novel and environmental friendly method for large-scale production of itopride and trimethobenzamide. Materials and Methods: Itopride and trimethobenzamide can be prepared from a common intermediate 4- (dimethylaminoethoxy) benzyl amine. The intermediate is prepared from one pot synthesis using Phyrdroxybenzaldehye and zinc dust and further reaction of the intermediate with substituted methoxy benzoic acid along with boric acid and PEG gives itopride and trimethobenzamide. Results: The intermediate 4-(dimethylaminoethoxy) benzylamine is prepared by treating p-hydroxybenzaldehyde and 2-dimethylaminoethyl chloride. The aldehyde formed is treated with hydroxylamine hydrochloride. The intermediate is confirmed by NMR and the purity is analysed by HPLC. Conclusion: Both itopride and trimethobenzamide were successfully synthesized by this method. The developed method is environmental friendly, economical for large-scale production with good yield and purity.

Sign in / Sign up

Export Citation Format

Share Document