Gaussian Optics

Author(s):  
Mey Chern Loh

Analysis of Terahertz waves comes in three main forms, physical optics, geometrical optics, and Gaussian optics. Physical optics has the highest accuracy but it is time consuming when it is applied in the design of large radio telescopes. Also, it is only capable of computing radiation characteristics. Geometrical optics, on the other hand, reduces computational time significantly. But it does not give accurate results when designing telescopes which are to operate at Terahertz frequencies. Gaussian optics is a good trade-off between these two methods and it is a popular approach used in the design of large radio telescopes — particularly those which operate near/in the Terahertz band. Since it accounts for the effects of diffraction, this method produces reasonably accurate results. This chapter describes Gaussian optics, with emphasis given on its application in the design of radio telescopes.

2021 ◽  
Vol 53 (8) ◽  
Author(s):  
Chuang Yang ◽  
Jian Wang ◽  
Cheng Yang

AbstractIn this paper, the characteristics of the transmission coefficient (S$$_{21}$$ 21 ) measured in free-space at terahertz frequencies are analyzed. The analysis results are used to estimate the permittivity of the material under test, and the estimated permittivity is adopted as an initial-value for the iterative algorithm to extract the complex permittivity of the material from the S$$_{21}$$ 21 . The iterative extraction technique based on the estimation is efficient, while the iterative extraction technique without the estimation is inefficient. Various known materials in the literature are used to validate the technique in the terahertz band.


2021 ◽  
Author(s):  
Shuang Pang ◽  
Yang Zeng ◽  
Qi Yang ◽  
Bin Deng ◽  
Hong-Qiang Wang

Abstract In the terahertz band, the dispersive characteristic of dielectric material is one of the major problems in the scaled radar cross section (RCS) measurement, which is inconsistent with the electrodynamics similitude deducted according to the Maxwell’s equations. Based on the high-frequency estimation method of physical optics (PO), a scaled RCS measurement method for lossy objects is proposed through dynamically matching the reflection coefficients according to the distribution of the object’s facets. Simulations on the model of SLICY were conducted, the inversed RCS of the lossy prototype was obtained using the proposed method. Via comparing the inversed RCS with the calculated results, the validity of the proposed method is demonstrated. The proposed method provides an effective solution to the scaled RCS measurement for lossy objects in the THz band.


Author(s):  
Antonio Pinto ◽  
Riccardo Broglia ◽  
Elena Ciappi ◽  
Andrea Di Mascio ◽  
Emilio F. Campana ◽  
...  

Vortex-Induced Vibration (VIV) is one of the most demanding areas in the offshore industry, and detailed investigation of the fluid-structure interaction is becoming fundamental for designing new structures able to reduce VIV phenomenon. To carry on such analysis, and get reliable results in term of global coefficients, the correct modelling of turbulence, boundary layer, and separated flows is required. Nonetheless, the more accurate is the simulation, the more costly is the computation. Unsteady RANS simulations provide a good trade-off between numerical accuracy and computational time. This paper presents the analysis of the flow past a cylinder with several three-dimensional helical fins at high Reynolds number. Flow field, vortical structures, and response frequency patterns are analysed. Spectral analysis of data is performed to identify carrier frequencies, deemed to be critical due to the induced vibration of the whole structure. Finally, helical strakes efficiency in reducing the riser vibrations is also addressed, through direct consideration on the carrier shedding frequency.


Plant Methods ◽  
2019 ◽  
Vol 15 (1) ◽  
Author(s):  
Adnan Zahid ◽  
Hasan T. Abbas ◽  
Aifeng Ren ◽  
Ahmed Zoha ◽  
Hadi Heidari ◽  
...  

Abstract Background The demand for effective use of water resources has increased because of ongoing global climate transformations in the agriculture science sector. Cost-effective and timely distributions of the appropriate amount of water are vital not only to maintain a healthy status of plants leaves but to drive the productivity of the crops and achieve economic benefits. In this regard, employing a terahertz (THz) technology can be more reliable and progressive technique due to its distinctive features. This paper presents a novel, and non-invasive machine learning (ML) driven approach using terahertz waves with a swissto12 material characterization kit (MCK) in the frequency range of 0.75 to 1.1 THz in real-life digital agriculture interventions, aiming to develop a feasible and viable technique for the precise estimation of water content (WC) in plants leaves for 4 days. For this purpose, using measurements observations data, multi-domain features are extracted from frequency, time, time–frequency domains to incorporate three different machine learning algorithms such as support vector machine (SVM), K-nearest neighbour (KNN) and decision-tree (D-Tree). Results The results demonstrated SVM outperformed other classifiers using tenfold and leave-one-observations-out cross-validation for different days classification with an overall accuracy of 98.8%, 97.15%, and 96.82% for Coffee, pea shoot, and baby spinach leaves respectively. In addition, using SFS technique, coffee leaf showed a significant improvement of 15%, 11.9%, 6.5% in computational time for SVM, KNN and D-tree. For pea-shoot, 21.28%, 10.01%, and 8.53% of improvement was noticed in operating time for SVM, KNN and D-Tree classifiers, respectively. Lastly, baby spinach leaf exhibited a further improvement of 21.28% in SVM, 10.01% in KNN, and 8.53% in D-tree in overall operating time for classifiers. These improvements in classifiers produced significant advancements in classification accuracy, indicating a more precise quantification of WC in leaves. Conclusion Thus, the proposed method incorporating ML using terahertz waves can be beneficial for precise estimation of WC in leaves and can provide prolific recommendations and insights for growers to take proactive actions in relations to plants health monitoring.


2014 ◽  
Vol 02 (02) ◽  
pp. 1440008 ◽  
Author(s):  
LONGQING CONG ◽  
JIANQIANG GU ◽  
ZHEN TIAN ◽  
RANJAN SINGH ◽  
JIAGUANG HAN ◽  
...  

As the potential applications of terahertz science and technology become extremely important, there is an increasing demand for improved terahertz optical components. One of such devices on demand is the class of polarization control devices. Recently, metasurfaces have emerged as designer structures with excellent control, design flexibility, and multifaceted functionalities. Metamaterials offer fascinating prospects for manipulating the polarization state of terahertz waves. Here, we discuss different metamaterial device designs that exhibit properties of perfect linear polarization rotation and linear to either linear or circular polarization conversion at narrowband as well as broadband terahertz frequencies.


Author(s):  
Michael E. Thomas

In this chapter, the optical spectrum is defined and subdivided into many sub-bands, which are traditionally determined by transparency in various media. Propagation of the electromagnetic field in vacuum, as based on Maxwell’s equations, and basic notions of geometrical and physical optics, are covered. The theoretical and conceptual foundation of the remaining chapters is established in this chapter and the next. Optical electromagnetic propagation is generally and often accurately described by classical geometrical optics or ray optics. When diffraction or wave interference is of concern, then the more complete field of physical optics is used. Geometrical optics requires precise knowledge of the spatial and spectral dependence of the index of refraction. This requires electrodynamics, which is most appropriately described by quantum optics. These topics are covered in the first five chapters. The definitions of the optical spectrum and the various models for describing propagation are introduced in the following. The optical electromagnetic field covers the range of frequencies from microwaves to the ultraviolet (UV) or wavelengths from 10 cm to 100 nm. This is a very liberal definition covering six orders of magnitude, yet the description of propagation is very similar over this entire band, and distinct from radio-wave propagation and x-ray propagation. A listing of the nomenclature for the different spectral bands within the range of optical wavelengths is given in Table 1.1. Other commonly used units of spectral measure such as wave number, frequency, and energy are also listed in the table. These various quantities are related to wavelength by the following formulas: where c is the speed of light (c = 2.99792458 × 108 m/sec), λ is wavelength, f is frequency in hertz, E is energy, h is Planck’s constant (h = 6.6260755(40) × 10−34 J sec), and ν is frequency in wave numbers (the number of wavelengths per centimeter). Although wavelength is commonly used by applied scientists and engineers, frequency is the most appropriate unit for the theoretical description of light–matter interactions. Because of the importance of spectroscopy in the discussion of optical propagation, the spectroscopic unit of wave number will be consistently used.


2014 ◽  
Vol 977 ◽  
pp. 108-111
Author(s):  
Yu Deng Wu ◽  
Guang Jun Ren

Researched the surface-enhanced Raman scattering on nanoparticle in terahertz range, and proved the existence of the same phenomenon-Raman enhancements in the terahertz band. By studying the electromagnetic enhancement principle of surface-enhanced Raman scattering, proposed to using finite difference time-domain to simulate the surface-enhanced Raman scattering of nanoparticles in the terahertz irradiated. Simulation results show that the FDTD method can effectively simulate the scattering of nanoparticles in terahertz band, resulting in surface-enhanced Raman scattering from the visible and infrared bands extended to the terahertz band, and the result provides basis for terahertz waves and surface-enhanced Raman scattering the combined application.


Author(s):  
Kim Ho Yeap ◽  
Koon Chun Lai ◽  
Kung Chuang Ting ◽  
Peh Chiong Teh ◽  
Humaira Nisar ◽  
...  

We present an analysis on the performance of Cassegrain reflector antennas. In our study, we have adopted the design parameters for the Cassegrain configuration used in the Atacama Large Millimeter Array (ALMA) project. We have adjusted the focal-length-to-diameter ratio f/D of the primary reflector to investigate the optimum performance of the antenna. In our study, signal frequency at the high edge of ALMA band 1, i.e. 45 GHz has been selected. The results obtained from the physical optics simulation show that the aperture efficiency of the antenna is at its optimum (i.e. 80.36%) when f/D ranges from 0.5 to 0.6. The radiation characteristics at this range of ratio are found to be similar. The radius of the secondary reflector and edge taper Te which correspond to the optimum aperture efficiencies ranges from 371 mm to 372 mm and 10.64 dB to 10.75 dB, respectively.


Sign in / Sign up

Export Citation Format

Share Document