Microwave Technology for Hybrid Fabrication Processes

2021 ◽  
Vol 42 ◽  
pp. 85-90
Author(s):  
Daniel Cristian Ghelsingher ◽  
Ionel Dănuț Savu ◽  
Sorin Vasile Savu
Keyword(s):  
3D Printing ◽  
Laser Welding ◽  
Arc Welding ◽  
Thermal Source ◽  
Microwave Technology ◽  
Hybrid Processes ◽  
Microwave Beam ◽  
Composites Materials ◽  
Increase Productivity

This paper aims to present how the microwave technology can be used in the development of hybrid joining and microjoining technologies for composites materials in order to increase productivity and quality of the welds. The paper is mainly focused on conceptualization of various types of hybrid processes by coupling a microwave beam with conventional thermal source such as arc welding, laser welding, 3D printing and others. The concepts presented in this paper will be completed with sensing solution for sensing and automation of the processes.

Biomimetic Design of 3D Printed Tissue-engineered bone Constructs

2020 ◽  
Vol 16 ◽  
Author(s):  
Wei Liu ◽  
Shifeng Liu ◽  
Yunzhe Li ◽  
Peng Zhou ◽  
Qian ma
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Advanced Materials ◽  
Bionic Design ◽  
Material Interfaces ◽  
Precise Control ◽  
Cell Printing ◽  
Biomimetic Scaffolds ◽  
3D Printed

Abstract:: Surgery to repair damaged tissue, which is caused by disease or trauma, is being carried out all the time, and a desirable treatment is compelling need to regenerate damaged tissues to further improve the quality of human health. Therefore, more and more research focus on exploring the most suitable bionic design to enrich available treatment methods. 3D-printing, as an advanced materials processing approach, holds promising potential to create prototypes with complex constructs that could reproduce primitive tissues and organs as much as possible or provide appropriate cell-material interfaces. In a sense, 3D printing promises to bridge between tissue engineering and bionic design, which can provide an unprecedented personalized recapitulation with biomimetic function under the precise control of the composition and spatial distribution of cells and biomaterials. This article describes recent progress in 3D bionic design and the potential application prospect of 3D printing regenerative medicine including 3D printing biomimetic scaffolds and 3D cell printing in tissue engineering.

Determination of Heat Input in Tungsten Inert Gas and Laser Welding of Type Optim 960 QC Structural Steel Using Adams’ Equation for 2-D Heat Distribution

2017 ◽  
Vol 750 ◽  
pp. 45-52
Author(s):  
Sveto Cvetkovski
Keyword(s):  
Laser Welding ◽  
Heat Input ◽  
Arc Welding ◽  
Research Work ◽  
Laser Beam Welding ◽  
Peak Temperature ◽  
Efficiency Coefficient ◽  
Zone Recrystallization ◽  
Welding Processes

The heat input during conventional arc welding processes can be readily calculated knowing the power taken from the power source. The efficiency coefficient can be taken from the appropriate literature standards. Here, the intention of the performed research work was to develop a procedure for determination of heat input in arc and laser welding processes implementing Adams equation - modified Rykalin equation for two dimensional heat distributions (2-D). To realize this idea, it is necessary to determine two characteristic temperatures points in the HAZ with known peak temperature, and to determine distance between them. Implementing measured values for distance in Adams’ equation, heat input in arc welding can be directly determined in arc welded joints.In laser beam welding, the absorption of the beam in the metal is not known, so that the welding heat input cannot be calculated directly, and direct implementation of Adam’s equation is not possible i.e. absorption coefficient has to be determined first, and after that calculation of heat input is possible.The peak temperatures corresponding to specific microstructures can be obtained by performing welding simulation, by the Gleeble 1500 simulator in our case. As one of the peak temperatures, the melting temperature can be used corresponding to the fusion line, so that at least one characteristic peak temperature such as coarse grain zone, fine grin zone, intercritical zone, recrystallization, has to be determined by the simulation.Performed research showed that obtained values for heat input using Adam’s equation correspond pretty well with standard equation for heat input in arc welding.

Application of 3D-printing technologies for production of master-model in engineering industry

2021 ◽  
Vol 0 (9) ◽  
pp. 17-21
Author(s):  
O. A. Dvoryankin ◽  
◽  
N. I. Baurova ◽  
Keyword(s):  
3D Printing ◽  
Layer Thickness ◽  
Ultimate Strength ◽  
3D Models ◽  
Engineering Industry ◽  
Master Model ◽  
Parameter Influence ◽  
Printing Parameter

Analysis of 3D-printing methods used in the molding production to manufacture master-models has been carried out. The technology was selected, which allowed one to make high-precision parts, combining the molding and the 3D-printing. Factors effecting on the quality of 3D-models printed by this technology were analyzed. Experimental studied for determination of the printing parameter influence (layer thickness, filling percentage, printing velocity) on ultimate strength of specimens made of ABS-plastic were carried out.

Effect of copper or carbon fiber addition to the 3D printing of polylactid samples

2020 ◽  
Vol 62 (7) ◽  
pp. 727-732
Author(s):  
L. Zárybnická ◽  
D. Machová ◽  
K. Dvořák
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Depth Of Field ◽  
3D Print ◽  
Fused Deposition ◽  
Printing Quality ◽  
Digital Microscope ◽  
Effect Of Copper ◽  
The Right

Abstract This paper presents the effect of additives on the quality of a product created by 3D print. The product is created by the most widely used 3D printing method - Fused Deposition Modeling (FDM). Polylactic acid (PLA) filaments are tested without and with the addition of carbon fibers or copper. The specimens are characterized by different methods, such as mechanical testing, measuring roughness by digital microscope with a large depth of field and thermal analysis. In fact, FDM is a problematic process with numerous criterions that affect printing quality. Printing parameters such as print temperature, pad temperature, print speed for 3D printing, printing orientation etc. have an important impact on the performance and quality of FDM components. Due to the correct parameters, the product of the required quality with a longer service life is obtained. The results of testing show that the quantity and choice of the right ingredient has a major impact on the mechanical properties and overall quality of the investigated product.

scholarly journals Innovation Trajectories for a Society 5.0

Data ◽  
2021 ◽  
Vol 6 (11) ◽  
pp. 115
Author(s):  
Fabio De Felice ◽  
Marta Travaglioni ◽  
Antonella Petrillo
Keyword(s):  
Industry 4.0 ◽  
Well Being ◽  
Enabling Factors ◽  
Interpretive Structural Modeling ◽  
Main Driver ◽  
Increase Productivity ◽  
New Perspective ◽  
Hierarchy Process ◽  
The Internet Of Things

Big Data, the Internet of Things, and robotic and augmented realities are just some of the technologies that belong to Industry 4.0. These technologies improve working conditions and increase productivity and the quality of industry production. However, they can also improve life and society as a whole. A new perspective is oriented towards social well-being and it is called Society 5.0. Industry 4.0 supports the transition to the new society, but other drivers are also needed. To guide the transition, it is necessary to identify the enabling factors that integrate Industry 4.0. A conceptual framework was developed in which these factors were identified through a literature review and the analytical hierarchy process (AHP) methodology. Furthermore, the way in which they relate was evaluated with the help of the interpretive structural modeling (ISM) methodology. The proposed framework fills a research gap, which has not yet consolidated a strategy that includes all aspects of Society 5.0. As a result, the main driver, in addition to technology, is international politics.

scholarly journals Evaluation of the quality of the shielded metal arc welding process using speckle interferometry

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Felipe Maia Prado ◽  
Daniel José Toffoli ◽  
Sidney Leal Da Silva
Keyword(s):  
Arc Welding ◽  
Speckle Pattern ◽  
Welding Process ◽  
Time History ◽  
Speckle Interferometry ◽  
Shielded Metal Arc Welding ◽  
Metal Arc Welding ◽  
Properties Of Materials ◽  
Arc Welding Process

Speckle, which is a branch of optics that studies the interference pattern caused by the incidence of coherent light in a material’s surface, has some optical techniques and methods that can be successfully applied to determine properties of materials. In this work we used the method called THSP, Time History Speckle Pattern, in samples made of AISI 1020 carbon steel that were submitted to the shielded metal arc welding (SMAW) process, with the objective of identifying (qualitatively) the level of irregularity on its welded surface, by comparing these samples with a default sample, made with the same material. The technique of spekle by reflection was used for data collection. The results showed quantitative diferences between the default welded sample and the other samples, and there are good perspectives that speckle can be applied to determine the quality of the welding process, since the results showed more accuracy than visual inspection.  

scholarly journals DIAGNÓSTICO DE CANTEIROS DE OBRAS SITUADOS NA CONURBAÇÃO CRAJUBAR NO CARIRI CEARENSE

2018 ◽  
Vol 14 (2) ◽  
Author(s):  
Antônio Italcy de Oliveira Júnior ◽  
Michelly Matos Pereira ◽  
Celme Torres Ferreira da Costa
Keyword(s):  
Diagnostic Method ◽  
Arithmetic Mean ◽  
Great Good ◽  
Construction Sites ◽  
The Sustainable Development ◽  
Mixed Use ◽  
Increase Productivity ◽  
And Storage ◽  
Means Of Production

RESUMO: No momento de instabilidade econômica em que se encontra o país, ações que minimizem os gastos e que aumentem a produtividade na construção civil visando ao desenvolvimento sustentável dos meios de produção estão cada vez mais sendo solicitadas. Com o intuito de realizar um diagnóstico da disposição, organização e práticas nos canteiros de obra da região do Crajubar, foram estudadas dez construções em execução na região. A amostra selecionada contemplava edificações horizontais e verticais, com finalidade de uso comercial, residencial e mista. Os dados foram obtidos a partir do método de diagnóstico que consiste na aplicação de uma lista de verificação (check-list) padronizada, que contemplava três grupos a serem analisados: instalações provisórias, segurança na obra e movimentação e armazenagem de materiais. Para a visualização e identificação de falhas nos canteiros foi feito um registro fotográfico de itens pré-determinados. De posse das informações coletadas foram atribuídas notas para os grupos, calculada a nota global (que é a média aritmética das notas de grupo) e as obras foram distribuídas em quatro categorias: ótimas, boas, regulares e ruins. As obras horizontais obtiveram as piores notas, entre 4,01 e 6, enquanto as obras verticais que apresentavam políticas de gestão de qualidade se destacaram com as melhores notas, entre 8,01 e 10. O tipo de obra foi o fator que mais influenciou na qualidade dos canteiros de obras avaliados no Crajubar cearense.ABSTRACT: At a time of economic instability in the country, actions that minimize expenditures and increase productivity in civil construction aimed at the sustainable development of the means of production are increasingly being requested. In order to make a diagnosis of the layout, organization and practices in the construction sites of the Crajubar region, ten constructions were studied in the region. The sample selected included horizontal and vertical buildings, for commercial, residential and mixed use. The data were obtained from the diagnostic method, which consists of the application of a standardized checklist, which included three groups to be analyzed: temporary installations, handling and storage of materials. Along with this list, a photographic record of predetermined items was made for the visualization and identification of defects in the construction. From the information collected, the group notes and a global grade (the arithmetic mean of the group notes) were assigned and the works were distributed into four categories: great, good, regular and bad. The horizontal construction obtained the worse notes, between 4.01 and 6, while the vertical construction that presented policies of quality management stood out with the best notes, between 8,01 and 10. The type of construction was the factor that most influenced the quality of the construction sites evaluated in Crajubar cearense.

scholarly journals Model Disiplin Kerja, Iklim Organisasi dan Produktivitas Kerja Pegawai

2018 ◽  
Vol 9 (2) ◽  
pp. 85-92
Author(s):  
Zulfikar Ikhsan ◽  
Suwatno Suwatno ◽  
Budi Santoso
Keyword(s):  
Organizational Climate ◽  
Linear Regression Analysis ◽  
Work Productivity ◽  
Multiple Linear Regression Analysis ◽  
Regional Office ◽  
Managerial Implication ◽  
High Productivity ◽  
Productivity Increase ◽  
Increase Productivity

AbstractDemands for productivity are getting higher. The tight competition among retailers causes companies that do not have high productivity to compete. Quality of HR is the key to success. The purpose of the study was to obtain an explanation of the influence of work discipline and organizational climate on the work productivity of employees at PT. Surya Donasin Regional Office Cianjur, which numbered 59 employees randomly selected. The research method uses explanatory survey with multiple linear regression analysis. Based on the results of the research that productivity as one of the keys to compete in the retail industry is determined by work discipline and organizational climate that supports work productivity. Labor productivity is determined by internal and external dynamics in the form of organizational climate. The managerial implication is that the lack of productivity over employees causes low company productivity. Increase productivity as an option to support work productivity.Keywords : Work discipline; organizational climate; productivity; retailer industry AbstrakTuntutan terhadap produktivitas semakin tinggi. Persaingan yang cukup ketat diantara perusahaan retailer menyebabkan perusahaan yang tidak memiliki produktivitas tinggi kalah bersaing. Kualitas SDM menjadi kunci keberhasilan. Tujuan penelitian untuk memperoleh penjelasan tentang pengaruh disiplin kerja dan iklim organisasi terhadap produktivitas kerja para pegawai di PT. Surya Donasin Regional Office Cianjur yang berjumlah 59 pegawai yang dipilih secara acak. Metode penelitian menggunakan survey explanatory dengan analisis regresi linear berganda. Berdasarkan hasil penelitian bahwa produktivitas sebagai salah satu kunci untuk bersaing dalam industri retail ditentukan oleh disiplin kerja dan iklim organisasi yang mendukung produktivitas kerja. Produktivitas tenaga kerja ditentukan oleh dinamika internal dan eksternal berupa iklim organisasi. Implikasi manajerial adalah lemahnya produktivitas pegawai menyebabkan produktivitas perusahaan rendah. Meningkatkan produktivitas sebagai pilihan untuk mendukung produktivitas kerja.Kata Kunci: Disiplin kerja; iklim organisasi; produktivitas; industri retailer

scholarly journals Model pengembangan ekonomi lokal (PEL) berbasis produktivitas kopi arabika spesialti di Kabupaten Simalungun

2019 ◽  
Author(s):  
Jef Rudiantho Saragih
Keyword(s):  
Net Income ◽  
Development Programs ◽  
Poverty Level ◽  
Arabica Coffee ◽  
Agriculture Sector ◽  
Specialty Coffee ◽  
Coffee Farm ◽  
Increase Productivity ◽  
And Control

Specialty arabica coffee productivity could be improved by land extensification, optimizing the use of family labor, increase cost of organic and chemicals fertilizer, land use (intercropping and/or multistrata), increase in the price of parchment, increase in premium coffee prices, increase in liquidity of financial of household farmer, an increase in the practice of coffee pruning, and control of coffee berry borer (CBB). The application of good agriculture practices (GAPs) can increase the quality of the coffee produced in the Simalungun highlands. Increased productivity and quality is very prospective in the LED based on specialty coffee, mainly farmers' net income and local employment indicator. As the acceleration factors to increase productivity and quality of specialty arabica coffee is necessary: (1) re-mapping the areas of unique production, including the revision of Kepmenhut 44/2005; and (2) introduce and implementation of selected development programs at the farm and the regional level. Specialty arabica coffee contributed by 3.27%; 5.99%; and 13.17o% in the regional income of Simalungun District, agriculture sector, and estate crop subsector, respectively. Base on indicators of absorption of local labor, specialty arabica coffee is able to contribute about 8.29,%; 14,47%; and 24,86%o in the total workforce, agriculture sector, and estates crop subsector. Specialty arabica coffee farm able to give a US$2.05 per capita per day, so it is able to reduce the poverty level in the rural region. It is recommended that the Simalungun local government adopt the model of LED specialty arabica coffee commodity-based.

Sign in / Sign up

Export Citation Format

Share Document