Control Standard of Ground Surface Settlement Induced by Running Tunnel Construction in Beijing Subway

2011 ◽  
Vol 117-119 ◽  
pp. 721-725 ◽  
Author(s):  
Cheng Ping Zhang ◽  
Li Min Li ◽  
He Li ◽  
Jian Chen Wang
Keyword(s):  
Numerical Simulation ◽  
Ground Surface ◽  
Control Valve ◽  
Surface Settlement ◽  
Tunnel Construction ◽  
Ground Settlement ◽  
Simulation Based ◽  
Ground Surface Settlement ◽  
Subway Construction ◽  
Beijing Subway

Ground settlement, especially the ground surface settlement induced by subway tunneling is an important issue. However, there is no an agreed standard for controlling ground surface settlement during the subway construction at present. The control standard of ground surface settlement was studied using the methods of statistical analysis and numerical simulation based on the running tunnel in Beijing subway. According to the research results, a conclusion could be obtained that the ground surface settlement can be controlled within 40 mm using the general construction measures in Beijing subway running tunnel construction, and furthermore, the settlement of 40mm will not damage the existing nearby structures and utilities including neighboring buildings, bridges and pipelines, etc. So the control valve of 40 mm is rational, which can be adopted as the control standard of ground surface settlement induced by running tunnel construction in Beijing subway.

Prediction of Shield Tunnelling-Induced Ground Settlement Considering Soil-Water Coupled and around Soil Disturbance Damage

2010 ◽  
Vol 168-170 ◽  
pp. 357-364
Author(s):  
Ji Feng Liu ◽  
Bo Liu ◽  
Hui Zhi Zhang
Keyword(s):  
Numerical Simulation ◽  
Soil Water ◽  
Ground Surface ◽  
Soil Disturbance ◽  
Surface Settlement ◽  
Shield Tunnel ◽  
Tunnel Construction ◽  
Ground Settlement ◽  
Ground Surface Settlement ◽  
Shield Tunnelling

to evaluate the influence of soil-water coupled and shield tunnel construction induced around soil disturbance damage on ground surface settlement, the process of shield tunnel construction induced around soil disturbance is analyzed, the FLAC3D numerical simulation are carried out, and a newly-modified tunnelling-induced ground settlement calculation method based on disturbance degree of around soil and soil-water coupled is presented, and these methods are applied in case of Beijing Metro 10thLine. It is indicated that considering the influence of the shield tunnelling-induced around soil disturbance damage, and soil-water coupled induced soil properties weakening and the excess pore water pressure dissipating induced soil consolidation to the ground surface settlement are necessary, the calculating result of the newly-modified surface settlement prediction method, and the result FLAC3D numerical simulation all agree well with in-site observed data of Beijing Metro 10th Line.

Calculation and Analysis of the Construction Program in Nanjing Rail Transit Line 1 from South Yanande's Door to NingDan Road

2012 ◽  
Vol 256-259 ◽  
pp. 1447-1452
Author(s):  
Ying Chun Fu
Keyword(s):  
Ground Surface ◽  
Bending Moment ◽  
Surface Settlement ◽  
Tunnel Construction ◽  
Rail Transit ◽  
Construction Process ◽  
Finite Element Software ◽  
Ground Surface Settlement ◽  
Subway Construction ◽  
Supporting Force

It is the key to success or failure of the construction that we control the ground surface settlement, vault sink and supporting force by the choice of the reasonable construction method in the subway construction process. Based on the project profiles of the tunnel in Nanjing orbit traffic line 1 from South Yan'an road to NingDan road, the article mainly carries on the numerical simulation to construction program by using ANSYS finite element software according to the joint arch tunnel construction of the double and triple arch in the entry end .The article mainly has an analysis from the ground surface settlement, the strata, axial force of supporting structure, bending moment and other aspects. The results show that the program is feasible. The article provids guidance to the future construction of similar projects .

Analysis of Surface Subsidence Rule of the Shallow Subway Tunnel Construction

2013 ◽  
Vol 671-674 ◽  
pp. 1081-1086 ◽  
Author(s):  
Fei Fei Wang ◽  
Hui Ren Bai ◽  
Jing Jing Li
Keyword(s):  
Ground Surface ◽  
Calculation Model ◽  
Surface Subsidence ◽  
Surface Settlement ◽  
Tunnel Construction ◽  
Maximum Point ◽  
Subway Tunnel ◽  
Monitoring Frequency ◽  
Ground Surface Settlement ◽  
Value Range

In order to study the Dalian Metro section 202(Cujin Road station-Chunguang Street station, which is shallowly buried and covered with plain fill)’s ground surface settlement, the monitoring measuring station was built during the construction. After 3 months’ measuring by precision level,the data shows that the maximum point is in the center line of the tunnel of the upper part. The settlement is about 25.66-31.82mm. This paper put forward the concept of the distance span ratio β, β effective value range was - 4 <β< 4,Surface subsidence is closely related with β, Severe surface subsidence stage is -2 <β< 2, Occupy whole deformation is 67.5-77.6%,settlement rate about 0.84-0.93mm/d, so should strengthen the monitoring frequency, Suggest increases site tour. Field test results and the ground surface settlement calculation model winkle are identical with each other; the monitoring results have important guiding significance and reference for Dalian subway and the similar shallow depth excavation tunnel construction.

scholarly journals Ground Surface Settlement Evaluation by Proportional Hazards Model in Tunneling Projects

2021 ◽  
Author(s):  
Ali Kazempour Osalou ◽  
sayfoddin moosazadeh ◽  
Ali Nouri Qarahasanlou
Keyword(s):  
Risk Factors ◽  
Ground Surface ◽  
Injection Pressure ◽  
Surface Settlement ◽  
Proportional Hazard ◽  
Ground Settlement ◽  
Cohesion Strength ◽  
Proportional Hazard Model ◽  
Ground Surface Settlement ◽  
Tunnel Depth

Abstract Nowadays, tunnel excavation plays a major role in development of countries. Due to the complex and challenging ground conditions, a comprehensive study and analysis must be done before, during and also after the excavation of tunnels. Hence, the importance of study and evaluation of ground settlement are dramatically increased, since many tunnel projects are performed in the urban areas where there are plenty of constructions, buildings and facilities. For this reason, the control and prediction of ground settlement is one of the complicated topic in the fields of risk engineering. Therefore, in this paper, proportional hazard model (PHM) is used to analyze and study the ground settlement induced by Tabriz Metro Line 2 (TML2) tunneling. The PHM method is a semi-parametric regression method that can enter environmental conditions or factors affecting settlement probability. These influential factors are used as risk factors in the analysis. After establishing a database for a case study and using proportional hazard model for surface settlement analysis, and then, by evaluating the effect of environmental conditions on the ground surface settlement, it has been found that the risk factors of grouting pressure behind the segment, the ratio of tunnel depth to groundwater level, and drained cohesion strength at a significant level of 5% have a direct effect on the probability of settlement. The results also showed that the effect of grout injection pressure on ground subsidence is more than other parameters, and with increasing injection pressure, the probability of exceeding safe subsidence values decreases. In addition, it has been found that increasing the risk factor for the ratio of tunnel depth to groundwater level reduces the probability of exceeding the safe ground settlement. Finally, increasing the number of risk factors for drained cohesion strength increases the probability of exceeding safe settlement.

scholarly journals An Investigation into the Tunnel-Soil-Pipeline Interaction by In Situ Measured Settlements of the Pipelines

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Xinggao Li ◽  
Ting Wang ◽  
Yi Yang
Keyword(s):  
Practical Implication ◽  
Ground Surface ◽  
Tunnel Construction ◽  
Buried Pipeline ◽  
Buried Pipelines ◽  
Close Proximity ◽  
Ground Surface Settlement ◽  
Subway Construction ◽  
Pipeline Safety

Response of buried pipeline to tunnelling is of great concern in the subway construction. It is of paramount importance but difficult to estimate the influence of tunnelling on adjacent pipelines because of the complex tunnel-soil-pipeline interaction. The technique of in situ measured settlements of buried pipelines remains the standard approach for understanding this interaction and addressing the issue. The Huangzhuang station of the Beijing Subway is located in a densely populated area, with many buried pipelines in the close proximity; the shallow tunnelling method of pile-beam-arch (PBA method) was used to excavate the station tunnels; the shallow tunnelling of the station tunnels inevitably causes settlements of the ground surface and the buried pipelines. Direct monitoring of the pipelines by digging holes from the ground surface was performed during the station tunnel construction. In situ measured settlements of the ground surface and the buried pipelines caused by the subway construction were obtained. It is observed from the obtained results that the pipeline settlement development can be divided into four stages that are associated with different construction periods of the PBA method. Sharp increases in the pipeline settlement occurred in the specific stages (stages 2 and 4). It is concluded from comparisons between the pipeline settlement and the ground surface settlement that separation between steel or cast iron pipelines and the soil beneath occurs due to the tunnel construction. And the pipeline settlement is smaller than that of the ground surface. This finding has the practical implication that the ground surface can be monitored instead of the buried pipeline. Using this indirect pipeline monitoring, the pipeline safety can be conservatively evaluated. This study is an example for evaluating the shallow tunnelling-induced effects on adjacent buried pipelines and understanding the tunnel-soil-pipeline interaction under similar conditions.

scholarly journals Spatial Variability of Grouting Layer of Shield Tunnel and Its Effect on Ground Settlement

2020 ◽  
Vol 10 (14) ◽  
pp. 5002
Author(s):  
Zhongzheng Wang ◽  
Dalong Jin ◽  
Chenghua Shi
Keyword(s):  
Spatial Variability ◽  
Negative Impact ◽  
Ground Surface ◽  
Surface Settlement ◽  
Shield Tunnel ◽  
Ground Settlement ◽  
Shield Tunneling ◽  
Spatial Characteristics ◽  
Ground Surface Settlement ◽  
Prediction Approach

This study aims to investigate the effect of the spatial variability of grouting-layer thickness on ground-surface settlement caused by shield tunneling and to provide a rational prediction method. The spatial characteristics of grouting layers were obtained based on statistical analysis. The random finite element method was used to study the effect of spatial variability of different parameters on ground-surface settlement. Simulation results indicate that the spatial variability of the grouting layer has a negative impact on ground settlement. The surface settlement will be underestimated without considering the spatial characteristics of the grouting layer. Thus, a reliable prediction approach of the maximum ground settlement was proposed to control the construction quality.

Prediction on Ground Surface Settlement Caused by Subway Shield Construction in Xi'an

2013 ◽  
Vol 353-356 ◽  
pp. 1534-1538
Author(s):  
Rong Di Liu ◽  
Jian Guo Zheng ◽  
Kai Zhang ◽  
Zhi Yuan Li
Keyword(s):  
Ground Surface ◽  
Surface Settlement ◽  
Characteristic Parameters ◽  
Prediction Formula ◽  
Shield Tunneling ◽  
Ground Surface Settlement ◽  
Subway Construction ◽  
Actual Settlement ◽  
Relevant Calculation

In order to study the ground surface settlement induced by shield tunneling, on the background of Xi'an metro line 2, this paper made use of the measured ground surface settlement to conduct characteristic parameters fitting of the settlement trough by Peck formula and the modified stiffness approach, proposed the initial suggestive value of the relevant calculation parameters, predicted the ground surface settlement by the formula with the determined parameters and compared the settlement with the actual settlement observation. The results show that the determination of the parameters is basicly right, the revised formula can be used to forecast ground surface settlement of Xi'an subway construction and finally a modified prediction formula is given.

scholarly journals Analytical Method for Evaluating the Ground Surface Settlement Caused by Tail Void Grouting Pressure in Shield Tunnel Construction

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Changsheng Wu ◽  
Zhiduo Zhu
Keyword(s):  
Elastic Modulus ◽  
Ground Surface ◽  
Surface Settlement ◽  
Shield Tunnel ◽  
Tunnel Construction ◽  
Grouting Pressure ◽  
Ground Surface Settlement ◽  
Tunnel Depth ◽  
Surface Heave ◽  
Surrounding Soil

The tail void grouting is a key step in shield tunnel construction and has an important influence on the loading on the surrounding soil and on the resulting settlement. In order to estimate the ground surface settlement caused by tail void grouting pressure in tunnel construction, the loading on the surrounding soil is simplified as an expansion problem of the cylindrical cavity in semi-infinite elastic space. A simple analytical formula is deduced by using the virtual image technique and Fourier transform solutions. The effectiveness of the proposed method is verified by case studies. The effects of elastic modulus, tail void grouting pressure, tunnel radius, and tunnel depth on the ground surface heave are conducted. The results indicate that the computed results are in accordance with Ye’s solution and it is more rational to consider the ground surface heave induced by tail void grouting pressure in the prediction of ground settlement due to shield excavation. Moreover, the ground surface heave owing to tail void grouting pressure resembled a Gaussian distributed curve. Thus, no matter the ground surface subsidence or ground surface heave can be predicted by means of adding the presented empirical formula to the Peck formula which cannot predict the ground surface heave. The ground surface heave decreases with an increase in elastic modulus. On the contrary, as the tail void grouting pressure and tunnel radius increase, the ground surface heave increases, respectively. The ground surface heave first steadily increases and then declines gradually with the tunnel depth increase.

scholarly journals Characteristics of Stress Transfer and Progressive Fracture in Overlying Strata due to Mining-Induced Disturbances

2018 ◽  
Vol 2018 ◽  
pp. 1-13 ◽  
Author(s):  
Xiang-feng Lv ◽  
Hong-yuan Zhou ◽  
Ai-wen Wang ◽  
Chun Feng ◽  
Xiao-chun Xiao
Keyword(s):  
Numerical Simulation ◽  
Underground Mining ◽  
Ground Surface ◽  
Stress Transfer ◽  
Surface Settlement ◽  
Stress Concentrations ◽  
Tunnel Face ◽  
Working Face ◽  
Ground Surface Settlement ◽  
Overlying Strata

In this study, based on the mining of the 13210 working face in the Yima coal mine of the Gengcun village, China, a simplified mechanical model for the analysis of dynamic destabilization of the overlying strata during underground mining was constructed. The numerical simulation was used to analyze the stress patterns in the advanced abutments of the tunnel face and the characteristics of dynamic failures in the overlying strata. Furthermore, similitude experiments were conducted to study the process of stress release and deformation in the overlying strata, and to analyze the effects of overburden destabilization on the ground surface settlement. The theoretical analysis indicated that if the geometric parameters of a working face are fully determined, a stiffness ratio no greater than 1 is required for dynamic destabilization to occur. The numerical simulation results show that the stress in the overlying strata decreases with a decrease in distance from the tunnel face. The stresses in the advanced abutments initially increase with an increase in distance from the tunnel face, followed by a decrease in stress, and an eventual stabilization of the stress levels; this corresponds to the existence of a “stress build-up zone,” “stress reduction zone,” and “native rock stress zone.” In similitude experiments, it was observed that a “pseudoplastic beam” state arises after the local stresses of the overlying strata have been completely released, and the “trapezoidal” fractures begin to form at stress concentrations. If the excavation of the working face continues to progress, the area of collapse expands upward, thereby increasing the areas of the fracture and densification zones. Owing to the nonuniform settlement of the overlying strata and the continuous development of bed-separating cracks, secondary fractures will be generated on both sides of the working face, which increase the severity of the ground surface settlement.

Sign in / Sign up

Export Citation Format

Share Document