Investigation on the Influence of the Surface Resin Rich Layer on the Thermoelastic Signal from Different Composite Laminate Lay-Ups

2006 ◽  
Vol 3-4 ◽  
pp. 167-172 ◽  
Author(s):  
G. Pitarresi ◽  
A. Conti ◽  
U. Galietti

This work presents a set of experimental results based on the measured thermoelastic signal from GRP composite coupons adopting different lay-ups. A comparison is made with the thermoelastic signal predicted by two different analytical models: one based on the classical law of the thermoelastic effect for orthotropic materials, and the other based on a novel theory accounting for the presence of a resin layer on the external surface of the composite structure. The composite coupons were designed such to determine a significant difference in the predictions made by the two theoretical models. Experimental results have shown a far better match with the predictions based on the novel theory accounting for the presence of a surface resin rich layer.

2017 ◽  
Vol 72 (6) ◽  
pp. 493-525 ◽  
Author(s):  
Jochem Hauser ◽  
Walter Dröscher

AbstractThis article provides a review of the latest experimental results in quantum physics and astrophysics, discussing their repercussions on the advanced physical theories that go beyond both the SMs (standard models) of particle physics and cosmology. It will be shown that many of the essential concepts of the advanced theoretical models developed over the past 40 years are no longer tenable because they are contradicting the novel data. Most recent results (December 2016) from the Large Hadron Collider revealed no new matter particles up to particle masses of 1.6 TeV/c2, which is in accordance with recent ACME experimental data (2014) that saw no electric dipole moment for the electron as predicted by these theories. Moreover, the LUX experiment (since 2013) did not see any dark matter particles either, thus independently supporting LHC and ACME measurements. Furthermore, experimental particle physics seems to be telling us that dark matter particles (LHC results) do not exist, suggesting that dark matter particles either are more exotic or are more difficult to detect than had been predicted in the past decades (less likely with recent LHC results). Astrophysical observations since 1933, starting with Caltech astronomer Zwicky, however, have provided irrefutable evidence for the existence of dark matter, for instance, based on the phenomenon of gravitational lensing as well as observed rotational velocities of stars orbiting the galactic center that are deviating from Newton’s law. Surprisingly, recent astronomical observations by Bidin, ESO (2010, 2012, 2014), seem to indicate the absence of dark matter within galaxies. In addition, cosmology at present has no explanation for about 68 % of the energy in the Universe that comes in the form of dark energy. Recently, measured data from three entirely different types of experiments both on earth and in space (2006–2011) are hinting at completely novel features of gravity that, if confirmed, must be outside Einstein’s general relativity. Extreme gravitomagnetic and gravity-like fields may have been observed at cryogenic temperatures generated by a rotating ring or disk. However, these experimental results are not conclusive so far. The strength of these extreme fields has been calculated and, according to the respective equations, should be sufficient to serve as a basis for a gravitational technology that, for example, could establish long sought field propulsion (i.e. propulsion without fuel), actively researched by physicists and rocket engineers in the 1960s and 1990s. This article concludes with an outlook on the novel technology of gravitational engineering that might follow from gravity-like fields and discusses the novel physical concepts resulting from the existence of these extreme gravitomagnetic fields.


1987 ◽  
Vol 109 (3) ◽  
pp. 552-559 ◽  
Author(s):  
M. Akkok ◽  
C. M. McC. Ettles ◽  
S. J. Calabrese

A study of the mechanics of ice friction was performed in which various theoretical models were compared to experimental results. Analytical models indicate that ice friction is affected by load, speed, ambient temperature, and thermal properties of the counterface material. All four parameters were varied and the results compared to analytical models with additional study using regression analysis. Conclusions indicate that under some conditions the friction of ice is subject to a thermal control mechanism.


2014 ◽  
Vol 6 (1) ◽  
pp. 1032-1035 ◽  
Author(s):  
Ramzi Suleiman

The research on quasi-luminal neutrinos has sparked several experimental studies for testing the "speed of light limit" hypothesis. Until today, the overall evidence favors the "null" hypothesis, stating that there is no significant difference between the observed velocities of light and neutrinos. Despite numerous theoretical models proposed to explain the neutrinos behavior, no attempt has been undertaken to predict the experimentally produced results. This paper presents a simple novel extension of Newton's mechanics to the domain of relativistic velocities. For a typical neutrino-velocity experiment, the proposed model is utilized to derive a general expression for . Comparison of the model's prediction with results of six neutrino-velocity experiments, conducted by five collaborations, reveals that the model predicts all the reported results with striking accuracy. Because in the proposed model, the direction of the neutrino flight matters, the model's impressive success in accounting for all the tested data, indicates a complete collapse of the Lorentz symmetry principle in situation involving quasi-luminal particles, moving in two opposite directions. This conclusion is support by previous findings, showing that an identical Sagnac effect to the one documented for radial motion, occurs also in linear motion.


Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 700
Author(s):  
Maria Concetta Oddo ◽  
Giovanni Minafò ◽  
Lidia La Mendola

In recent years, the scientific community has focused its interest on innovative inorganic matrix composite materials, namely TRM (Textile Reinforced Mortar). This class of materials satisfies the need of retrofitting existing masonry buildings, by keeping the compatibility with the substrate. Different recent studies were addressed to improve the knowledge on their mechanical behaviour and some theoretical models were proposed for predicting the tensile response of TRM strips. However, this task is complex due to the heterogeneity of the constituent materials and the stress transfer mechanism developed between matrix and fabric through the interface in the cracked stage. This paper presents a state-of-the-art review on the existing constitutive models for the tensile behavior of TRM composites. Literature experimental results of tensile tests on TRM coupons are presented and compared with the most relevant analytical models proposed until now. Finally, a new experimental study is presented and its results are used to further verify the reliability of the literature expressions.


Author(s):  
Nesma M Fahmy ◽  
Adel M Michael

Abstract Background Modern built-in spectrophotometer software supporting mathematical processes provided a solution for increasing selectivity for multicomponent mixtures. Objective Simultaneous spectrophotometric determination of the three naturally occurring antioxidants—rutin(RUT), hesperidin(HES), and ascorbic acid(ASC)—in bulk forms and combined pharmaceutical formulation. Method This was achieved by factorized zero order method (FZM), factorized derivative method (FD1M), and factorized derivative ratio method (FDRM), coupled with spectrum subtraction(SS). Results Mathematical filtration techniques allowed each component to be obtained separately in either its zero, first, or derivative ratio form, allowing the resolution of spectra typical to the pure components present in Vitamin C Forte® tablets. The proposed methods were applied over a concentration range of 2–50, 2–30, and 10–100 µg/mL for RUT, HES, and ASC, respectively. Conclusions Recent methods for the analysis of binary mixtures, FZM and FD1M, were successfully applied for the analysis of ternary mixtures and compared to the novel FDRM. All were revealed to be specific and sensitive with successful application on pharmaceutical formulations. Validation parameters were evaluated in accordance with the International Conference on Harmonization guidelines. Statistical results were satisfactory, revealing no significant difference regarding accuracy and precision. Highlights Factorized methods enabled the resolution of spectra identical to those of pure drugs present in mixtures. Overlapped spectra of ternary mixtures could be resolved by spectrum subtraction coupled FDRM (SS-FDRM) or by successive application of FZM and FD1M.


Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 673
Author(s):  
Augustyn Wójcik ◽  
Piotr Bilski ◽  
Robert Łukaszewski ◽  
Krzysztof Dowalla ◽  
Ryszard Kowalik

The paper presents the novel HF-GEN method for determining the characteristics of Electrical Appliance (EA) operating in the end-user environment. The method includes a measurement system that uses a pulse signal generator to improve the quality of EA identification. Its structure and the principles of operation are presented. A method for determining the characteristics of the current signals’ transients using the cross-correlation is described. Its result is the appliance signature with a set of features characterizing its state of operation. The quality of the obtained signature is evaluated in the standard classification task with the aim of identifying the particular appliance’s state based on the analysis of features by three independent algorithms. Experimental results for 15 EAs categories show the usefulness of the proposed approach.


2021 ◽  
Vol 1 ◽  
pp. 1123-1132
Author(s):  
Tatsuya Oda ◽  
Shigeru Wesugi

AbstractDuring the cold season, the cold protective products are often short during evacuation life after a natural disaster. If evacuees can make and wear simple cold protective gears by using materials obtainable on site, it will reduce the burden on the evacuees in emergent situation. Therefore, we investigated the structure constructed by folding newsprint paper, which can improve the heat retention effect and be applied to various body shapes. Focusing on the glide reflection structure repeating a smaller chamber, the basic size was determined by experiments with reference to the accordion shape, and the experimental results indicated that the heat retention effect was significantly greater than that of a mere air layer and those of ordinary fabrics. Next, it was found that the apex angle of structure had no significant difference in the heat retention effect. Then, the dimensions of the structure were determined to maintain the air layer under the pressure of the clothes by simulation of structural analyses. Finally, we made a temporary cold protective gear that can practically cover the trunk of the body and found that the heat retention effect was significantly higher than that of unprocessed newsprint and that of accordion shape.


2014 ◽  
Vol 1027 ◽  
pp. 253-256
Author(s):  
Jian Hai Han ◽  
Jie Zhang ◽  
Dong Liao Fu ◽  
Zhi Gang Hu

A new kind of miniature air compressor is proposed in this paper. This compressor can produce both compressed air and vacuum. The system structure, operating principle and experimental characteristics of the novel miniature air compressor are described in detail. The experimental results prove that the shift between air compressor mode and vacuum pump mode is possible and the design of system structure is appropriate.


Games ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 58
Author(s):  
Garret Ridinger

This paper investigates the importance of concerns about intentions and outcomes in a sequential prisoner’s dilemma game with nature. In the game, there is a chance that the first mover’s choice is reversed. This allows the separation of intended actions from the resulting outcomes. Equilibrium predictions from theoretical models of fairness are tested experimentally by varying the chance the first mover’s choice is reversed and whether the second mover observes the first mover’s choice. The results show that second mover cooperation is higher when the first mover has little control over their choice and when the second mover is not told what the first mover chose. While subject behavior is consistent with concerns for both intentions and outcomes, the results indicate that these concerns work in ways not predicted by current theoretical models. In addition, I find that psychometric measures of empathic concern and perspective taking are correlated with second mover cooperation and provide potential explanations for the experimental results.


Author(s):  
R. G. Munro ◽  
L Morrish ◽  
D Palmer

This paper is devoted to a phenomenon known as corner contact, or contact outside the normal path of contact, which can occur in spur and helical gear transmission systems under certain conditions. In this case, a change in position of the driven gear with respect to its theoretical position takes place, thus inducing a transmission error referred to here as the transmission error outside the normal path of contact (TEo.p.c). The paper deals with spur gears only, but the results are directly applicable to helical gears. It systematizes previous knowledge on this subject, suggests some further developments of the theory and introduces the novel phenomenon of top contact. The theoretical results are compared with experimental measurements using a single flank tester and a back-to-back dynamic test rig for spur and helical gears, and they are in good agreement. Convenient approximate equations for calculation of TEo.p.c suggested here are important for analysis of experimental data collected in the form of Harris maps. This will make possible the calculation of tooth stiffness values needed for use in theoretical models for spur and helical gear transmission systems.


Sign in / Sign up

Export Citation Format

Share Document