Experimental Research on Dressing of Tin-Iron Ore

2013 ◽  
Vol 303-306 ◽  
pp. 2528-2532
Author(s):  
Su Juan Yuan ◽  
Zhi Yong Shen ◽  
Xiao Long Lu

Based on studying of ore property and tests, the suitable mineral processing flowsheet for the tin—iron ore had been determined. Better technical and economic indexes had been achieved: the iron concentrate grade reached 64.45%, and the tin concentrate grade reached 13.06%. It gave a technical reference to rational development and utilization of such kind of tin-iron ore resource.

2013 ◽  
Vol 734-737 ◽  
pp. 1110-1113
Author(s):  
Xiang Wen Lv ◽  
Xiong Tong ◽  
Xian Xie ◽  
Qing Hua Zhou ◽  
Yong Cheng Zhou ◽  
...  

A beneficiation experimental research is conducted on sulfur-containing 18.17% multi-metals tailings. On the basis of the traditional mineral processing technology, it introduces X-51, a new type sulfide mineral activator, to instead of copper sulfate. Eventually, the sulfur concentrate grade is 47.51% with the recovery of 92.11%. The effectively recovery of the sulfur is creating good economic benefits and environmental benefit.


2011 ◽  
Vol 304 ◽  
pp. 387-390 ◽  
Author(s):  
Wei Zhi Wang ◽  
Jin Rui Zhang ◽  
Chun Guang Yang

An iron ore contains specularite and hematite which are its main iron minerals. And its main gangue minerals are specularite, part of the clay material and a small amount of quartz.Tests are made on the ore by adopting processes including gravity separation, high intensity magnetic separation, high intensity magnetic-gravity separation and high intensity magnetic - reverse flotation. The test results show that the separation process of high intensity magnetic-reverse flotation can obtain an iron concentrate grading about 66.62% at a recovery of 58.38% from an iron ore assaying around 35.00% iron, rather good metallurgical performances.


2012 ◽  
Vol 454 ◽  
pp. 227-230
Author(s):  
Lin Li ◽  
Xian Jun Lu ◽  
Jun Qiu

The results show that under the condition of grinding fineness(-200 mesh content) of 52.88% and magnetic field intensity of 0.2T, the index of concentrate yield is 13.25%, concentrate grade is 58.75% and concentrate recovery is 57.32% with preconcentration technology by magnetic separation.


2013 ◽  
Vol 641-642 ◽  
pp. 377-380
Author(s):  
Yi Miao Nie ◽  
Qi Hui Dai ◽  
Xiao Long Lu

Iron ore and tin mineral are the mainly recovered minerals of the low-grade ore, which could be effectively separated by a strong magnetic separation-gravity concentration process, with ore iron grade of 20.3%, tin grade 0.18%. Stage grinding and stage separation was used, getting the grade of iron concentrate and the recovery rate of tin separation index, the feeder of tin was magnetic separation tailing, by shaking table re-election, obtained tin concentrate grade was 10%, production was 0.34% (compared to the original ore, tin dressing) .Tin concentration ratio reached more than 330.


2013 ◽  
Vol 826 ◽  
pp. 126-129
Author(s):  
Ru Wang ◽  
Yue Xin Han ◽  
Yan Jun Li ◽  
Yu Shu Zhang

Suspension roasting furnace was used as the reactor of magnetic roasting of fine grained siderite, and the N2 was used as the conveying gas. The results show that, the siderite ore be roasted at the conditions of gas velocity is 1.7m/s, and the roasted time is 12.35s, according to magnetic separation can obtained iron concentrate grade is 65.04%, and recovery rate is 93.03%.


2012 ◽  
Vol 433-440 ◽  
pp. 1869-1873 ◽  
Author(s):  
Yi Miao Nie ◽  
Fu Sheng Niu ◽  
Mao Hui Xia

Oolitic hematite is a kind of difficult procession mineral because of the finely dissemination particle and complex mineral composition. In this paper, ore quality, technology mineralogy and mineral processing technology were studied. Three different technology was tested. Results shows (1)with the fineness of 0.076mm 95%,iron concentrate grade reach 62.74% with a recovery of 46.80% by high intensity magnetic separation-reverse floatation flow sheet. (2)61.09% iron concentrate grade and 45% recovery could be got by four times intensity magnetic separation with four times grinding and four times gravity separation.(3) according to roasting 75-90min with temperature 800°C and ore-coal ratio of 11,iron concentrate grade is 62.74% and recovery is 87% by roasting-magnetic separation flow sheet. This experimental study provide a good basis for using oolitite hematite in Hebei province.


2011 ◽  
Vol 304 ◽  
pp. 391-394
Author(s):  
Wei Zhi Wang ◽  
Jin Rui Zhang ◽  
Chun Guang Yang

An iron ore contains specularite and hematite which are its main iron minerals and carbonates such as calcite which are its main gangue minerals. The ore is very apt to produce slime in the grinding process,leading to a deteriorated beneficiability. The rough iron concentrate can be obtained by using high gradient magnetic separator to discard tailings with the grinding fineness of 95% -0.074mm. Then the rough concentrate is treated by reverse flotation to produce a final concentrate with the operation recovery of 66.49% and the iron grade of 66.12%,and the total recovery of iron could reach58.70%.


2012 ◽  
Vol 550-553 ◽  
pp. 2831-2834
Author(s):  
Wei Zhi Wang ◽  
Qing Mei Jia ◽  
Chun Guang Yang

The mineral processing experimental research was carried out on a high mud content lean hematite. The results showed that using the technological flowsheet of “stage grinding- low intensity magnetic separation for obtaining concentrate - high-intensity magnetic separation for discarding tailings-gravity separation(shaking table)”,a final iron concentrate with TFe grade of 65.89% ,yield of 19.35% and iron recovery of 52.32% from the raw ores with TFe grade of 24.07% was obtained, with the first stage grinding size being 50% -200 mesh and the second stage,95% -200 mesh.


2019 ◽  
Vol 109 ◽  
pp. 00089
Author(s):  
Serhii Skipochka

The goal of the work was to develop a concept of intensification of mining operations, taking into account geomechanical processes occurring in the “rock massif – mining workings – support and protective structures” system. The article is the result of theoretical and experimental research materials analysis and synthesis, carried out for the conditions of coal, non-metallic and iron-ore mines. Positive and negative geomechanical processes and phenomena, occurring during intensification of mining operations, have been substantiated. A set of technical and technological solutions to eliminate the negative phenomena associated with high mining rates development of mineral resources has been proposed. Recommendations, presented in this article, will significantly reduce the conditionally fixed costs of mining production and improve miner’s safety.


2011 ◽  
Vol 403-408 ◽  
pp. 377-382
Author(s):  
Xi Jia Huang ◽  
Qing Zhou

The management of intangible cultural heritage as tourism resources has drawn more and more concerns recently. Therefore, it is an important project to construct a management system for the tourism resources of intangible cultural heritage under the instruction of sustainable development theory, system theory, and opportunity cost theory on the need of its inheritance. Generally speaking, this project involves two aspects: the management of its development and utilization calls for a series of rational development methods, such as government guidance, reasonable programming, tourism-oriented development, and life field restoration; whereas the management of its protection and inheritance requires some multidimensional security measures, including system security, education guarantee, non-governmental protection and digital management etc.. The construction of such a management system will function as standard and enlightenment to the management of intangible cultural heritage as tourism resources.


Sign in / Sign up

Export Citation Format

Share Document