Investigation on Properties of Modified Asphalt Containing Antiaging Agent

2014 ◽  
Vol 490-491 ◽  
pp. 218-221
Author(s):  
Xiao Wang ◽  
Sai Sai Xie ◽  
Qing Lin Wu

The purpose of this work is to investigate the thermal aging and ultraviolet (UV) radiations aging of SBSMA. Antioxidants and UV absorbers were employed to improve the antiaging resistance of SBSMA in this study. The results indicated that the SBSMA with antioxidants has good heat aging resistance, and SBSMA with UV absorbers blends have good photostability. The compound antiaging agents containing antioxidants and UV absorbers are a best choice to prepare SBSMA with better physical and antiaging resistance. The experimental results also indicated that the effects of antiaging agents on the physical properties of SBSMA are little at low contents. Especially conventional physical properties of SBSMA with 1 wt% of ZDDP and 0.5 wt% of UV531 are close to that of SBSMA.

2020 ◽  
Vol 6 (5) ◽  
pp. 1017-1030
Author(s):  
Maria Iqbal ◽  
Arshad Hussain ◽  
Afaq Khattak ◽  
Kamran Ahmad

With the increase in demand of flexible pavements, due to their various advantages over rigid pavements, there is a need to improve the aging properties of the bitumen in order to enhance its resistance against different types of distresses such as rutting, fatigue cracking. This research focus on the use of one polymeric additive Polyethylene (PE) and one non polymeric additive Sulphur (S) to enhance the aging resistance of asphalt. These modifiers are evaluated for their effect on the aging mechanism in comparison with the unmodified bitumen. Aging of the original and modified bitumen is realized by the Rolling Thin Film Oven (RTFO) and Pressure Aging Vessel (PAV). Physical properties of the aged and unaged asphalt binders are evaluated through empirical testing like penetration, ductility and softening point test. Optimum content of the modifiers is obtained by comparing the results of conventional properties before and after aging. Fourier Transformed Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM) are performed to bring out the chemical and morphological changes in the modified binder. Rheological properties of modified asphalt are evaluated with the help of a Dynamic Shear Rheometer (DSR). Results indicate improvement in physical properties of the modified asphalt even after the aging. Penetration index increased which shows less temperature susceptibility of the modified binders. Carbonyl and sulfoxide index are used as aging indicators which shows reduction in case of modified samples. Decrease in the sulfoxide and carbonyl index indicates better oxidation resistance of the modified samples. Morphological analysis proves good compatibility of the modifiers with asphalt binders. DSR results indicate improved viscoelastic properties of the modified binders. Hence it can be concluded that Polyethylene and Sulphur are good options to improve the aging resistance of asphalt in terms of their cost effectiveness and environment friendly nature.


2021 ◽  
Vol 302 ◽  
pp. 124131
Author(s):  
Jing Li ◽  
Jing Yang ◽  
Yu Liu ◽  
Zhenxia Zhao ◽  
Xiaoying Tang ◽  
...  

1941 ◽  
Vol 14 (3) ◽  
pp. 580-589 ◽  
Author(s):  
G. Gee ◽  
L. R. G. Treloar

Abstract As high elasticity is a property possessed only by substances of high molecular weight, it is of interest to enquire into the relation between the elastic properties of a highly elastic material such as rubber and its molecular weight. An investigation on these lines has been made possible through the work of Bloomfield and Farmer, who have succeeded in separating natural rubber into fractions having different average molecular weights. The more important physical properties of these fractions have been examined with the object of determining which of the properties are dependent on molecular weight and which are not. Fairly extensive observations were made on the fractions from latex rubber referred to as Nos. 2, 3 and 4 by Bloomfield and Farmer, and some less extensive observations were carried out on the less oxygenated portion of fraction No. 1 obtained from crepe rubber (called hereafter 1b) . Before considering these experimental results, and their relation to the molecular weights of the fractions, it will be necessary to refer briefly to the methods used for the molecular-weight determinations, and to discuss the significance of the figures obtained.


Author(s):  
Gladstone Christopher Jayakumar ◽  
K Phebe Aaron ◽  
K Krishnaraj

Leather is three-dimensional matrix possessing unique properties which makes it more comfortable for daily use. Garments made from leathers are preferred choice owing to their multifaceted properties as compared to textiles in the colder regions. In the present study, an attempt has been made to evaluate the influence of phenolic syntan and synthetic fatliquor on the sewability and physical properties of post tanned leathers. From the experimental results, it is observed that the concentration of phenolic syntan and fatliquor influences leather sewability. Optical microscopic images of leathers also show that they are more compact and tighter with higher percentage of syntan. The study provides an insight in understanding the optimum usage of post tanning chemicals for better sewing properties without affecting the leather matrix adversely.


InCIEC 2013 ◽  
2014 ◽  
pp. 389-398 ◽  
Author(s):  
E. Shaffie ◽  
J. Ahmad ◽  
A. K. Arshad ◽  
D. Kamarun ◽  
F. Kamaruddin ◽  
...  

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 2108
Author(s):  
Bai Han ◽  
Chuqi Yin ◽  
Jiaxin Chang ◽  
Yu Pang ◽  
Penghao Lv ◽  
...  

Nanodoping is an effective way to improve the dielectric properties and the aging resistance of polyethylene. Nano-zeolite has a nano-level porous structure and larger specific surface area than ordinary nano-inorganic oxide, which can be used to improve dielectric properties of low-density polyethylene (LDPE) nanocomposite. The zeolite/LDPE nanocomposites were prepared and subjected to thermal aging treatment to obtain samples with different aging time. Using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and the differential scanning calorimetry (DSC) test to study the microscopic and structure characteristics, it was found that nano-zeolite doping can effectively reduce the thermal aging damage to the internal structure of the nanocomposite; carbonyl and hydroxyl decreased significantly during the thermal aging time, and the crystallinity effectively improved. Nano-zeolite doping significantly improved the morphology and strengthened the aging resistance of the nanocomposite. In the dielectric strength test, it was found that nanodoping can effectively improve the direct current (DC) and alternating current (AC) breakdown field strength and the stability after the thermal aging. The dielectric constant of nanocomposite can be reduced, and the dielectric loss had no obvious change during the aging process. Moreover, the zeolite/LDPE nanocomposite with the doping concentration of 1 wt % had the best performance, for the nano-zeolite was better dispersed.


1999 ◽  
Vol 4 (1) ◽  
Author(s):  
SHEILA CANEVESE RAHAL ◽  
MANOEL ÁLVARO GUIMARÃES ◽  
JOSÉ VICENTE FORTES ◽  
HÉLIO LANGONI ◽  
PEDRO HELIO LUCCHIARI

"Linhas de pesca"* em diâmetros de 0,15mm; 0,20mm; 0,25mm; 0,30mm foram divididas em quatro grupos, contendo dez amostras de cada diâmetro: grupo I - controle; grupo II - linhas colocadas em frasco com pastilhas de formalina; grupo III - um ciclo de autoclavagem (30 minutos à 121 C, seguido por 10 minutos de secagem à 37 C em estufa); grupo IV - dois ciclos de autoclavagens. Foram avaliadas quanto: comprimento, calibre, resistência no nó e alongamento. Comparativamente foram examinados fios de náilon cirúrgico nas numerações 0, 1-0, 2-0, 3-0, 4-0 e 5-0 (10 amostras de cada um). Pelos resultados da análise estastística, verificou-se que a esterilização pelo calor úmido exerceu um efeito adverso na resistência da "linha de pesca". Por outro lado não houve diferenças na resistência, calibre e alongamento da "linha de pesca" entre o primeiro e segundo ciclo de autoclavagem. As “linhas” mantidas em pastilhas de formalina mantiveram na sua maioria suas características originais de resistência, comprimento, diâmetro e alongamento quando comparada ao grupo controle, entretanto, cabe lembrar que o formaldeído é considerado irritante para pele e membrana mucosa. Foi possível concluir que a "linha de pesca" apresenta características semelhantes ao fio cirúrgico, podendo ser mantida em pastilhas de formalina ou esterilizada em autoclave, lembrando que a autoclavagem altera algumas de suas propriedades físicas. Abstract A comparative study has been carried out between fishing lines and nylon thread in regard to their applicability as surgical thread. Four groups of 10 fishing lines in each of the following diameters = 0.15, 0.20, 0.25 and 0.30 mm = were subjected to the following treatments: group I, control; group II sterilized with formalin tablets; group III, autoclaved 30 minutes at 121oC; group IV, autoclaved twice 30 minutes at 121oC. The following parameters were then considered: length, caliber, resistance at the knot, and elongation. Ten samples of each surgical 0, 1.0, 2.0, 3.0, 4.0 and 5.0 nylon threads were used in comparatively similar experiments as the ones carried out with the fishing lines. According to the statistical analyses of the experimental results, it has been found that the sterilization by means of the humid heat exerts an adverse effect on the resistance of the fishing line. However, no differences were found between the effect displayed by two cycles sterilization compared with the fishing lines subjected to only one cycle. The threads maintained in formalin kept the majority of their original properties of resistance, length, diameter and elongation when compared with the control group. It is known, however that formaldehyde is an irritant chemical towards the skin and the mucous membranes. It was possible to conclude: a. fishing lines display characteristics similar to that ones of the nylon surgical thread; b. they can be maintained in formalin solution; c. autoclave sterilization alters some of their physical properties.


1997 ◽  
Vol 478 ◽  
Author(s):  
Donald T. Morelli

AbstractA combination of environmental, economic, and technological drivers has led to a reassessment of the potential for using thermoelectric devices in several automotive applications. In order for this technology to achieve its ultimate potential, new materials with enhanced thermoelectric properties are required. Experimental results on the fundamental physical properties of some new thermoelectric materials, including filled skutterudites and 1–1–1 intermetallic semiconductors, are presented.


1993 ◽  
Vol 15 (4) ◽  
pp. 219-227 ◽  
Author(s):  
Richard A. Einhorn ◽  
Janis C. Stevenson

2011 ◽  
Vol 189-193 ◽  
pp. 3153-3157
Author(s):  
Yan Zhen Zhang ◽  
Yong Hong Liu ◽  
Ren Jie Ji ◽  
Bao Ping Cai

In this paper, the EDM performance of water-in-oil (W/O) emulsions dielectric with different surfactant concentration is investigated by correlated to its physical properties, such as viscosity and droplets size, which is predominantly determined by the surfactant concentration. Experimental results show that the stability of the W/O emulsions increases with increasing surfactant concentration, whereas the EDM performance deteriorates with increasing surfactant concentration. So, taking a comprehensively consideration of the emulsion stability and EDM performance, the concentration of surfactant must be appropriately selected.


Sign in / Sign up

Export Citation Format

Share Document