Application of Oyster (Anadara Inflata) Shell Chitosan as Adsorbent for Heavy Metal Cu(II) Ion

2015 ◽  
Vol 798 ◽  
pp. 390-394
Author(s):  
Saptono Hadi ◽  
Budi Hastuti ◽  
Nurina Tulus Setiawati
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Reaction Time ◽  
Contact Time ◽  
Adsorption Process ◽  
Interaction Mechanism ◽  
Chemical Mechanism ◽  
Optimum Conditions ◽  
Percentage Removal ◽  
Adsorption Capability

Research on the application of chitosan derived from oyster (Anadara inflata) shell as adsorbent for heavy metal Cu (II) has been conducted. Optimum conditions for adsorption, including pH, reaction time, and mass of adsorbent were investigated. Adsorption capability of Cu (II) by chitosan under those optimum conditions was subsequently evaluated by determining their adsorption isotherms and interaction mechanism. The results showed that the optimum condition for adsorption were pH 8, contact time 60 min, and mass of adsorbent 300 mg. Under those optimum conditions, chitosan has a high percentage removal of Cu (II) from aqueous solution, up to 70%. The adsorption process was well described as Langmuir isotherm and it is assumed that the interaction between Cu (II) and chitosan was based on chemical mechanism.

Use of agro-waste (Musa paradisiaca peels) as a sustainable biosorbent for toxic metal ions removal from contaminated water

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Contact Time ◽  
Metal Ion ◽  
Equilibrium Concentration ◽  
Ion Concentration ◽  
Contaminated Water ◽  
Musa Paradisiaca ◽  
Percentage Removal ◽  
Adsorbent Dose

A study of removal of heavy metal ions from heavy metal contaminated water using agro-waste was carried out with Musa paradisiaca peels as test adsorbent. The study was carried by adding known quantities of lead (II) ions and cadmium (II) ions each and respectively into specific volume of water and adding specific dose of the test adsorbent into the heavy metal ion solution, and the mixture was agitated for a specific period of time and then the concentration of the metal ion remaining in the solution was determined with Perkin Elmer Atomic absorption spectrophotometer model 2380. The effect of contact time, initial adsorbate concentration, adsorbent dose, pH and temperature were considered. From the effect of contact time results equilibrium concentration was established at 60minutes. The percentage removal of these metal ions studied, were all above 90%. Adsorption and percentage removal of Pb2+ and Cd2+ from their aqueous solutions were affected by change in initial metal ion concentration, adsorbent dose pH and temperature. Adsorption isotherm studies confirmed the adsorption of the metal ions on the test adsorbent with good mathematical fits into Langmuir and Freundlich adsorption isotherms. Regression correlation (R2) values of the isotherm plots are all positive (>0.9), which suggests too, that the adsorption fitted into the isotherms considered.

scholarly journals Modified/Unmodified Nanoparticle Adsorbents of Cellulose Origin With High Adsorptive Potential for Removal of Pb(II) From Aqueous Solution

2017 ◽  
Vol 13 (27) ◽  
pp. 425
Author(s):  
Azeh Yakubu ◽  
Gabriel Ademola Olatunji ◽  
Folahan Amoo Adekola
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Contact Time ◽  
Adsorption Process ◽  
Correlation Coefficients ◽  
Solution Temperature ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Kinetics Of Adsorption ◽  
Kinetics Of

This investigation was conducted to evaluate the adsorption capacity of nanoparticles of cellulose origin. Nanoparticles were synthesized by acid hydrolysis of microcrystalline cellulose/cellulose acetate using 64% H3PO4 and characterized using FTIR, XRD, TGA-DTGA, BET and SEM analysis. Adsorption kinetics of Pb (II) ions in aqueous solution was investigated and the effect of initial concentration, pH, time, adsorbent dosage and solution temperature. The results showed that adsorption increased with increasing concentration with removal efficiencies of 60% and 92.99% for Azeh2 and Azeh10 respectively for initial lead concentration of 3 mg/g. The effects of contact time showed that adsorption maximum was attained within 24h of contact time. The maximum adsorption capacity and removal efficiency were achieved at pH6. Small dose of adsorbent had better performance. The kinetics of adsorption was best described by the pseudo-second-Order model while the adsorption mechanism was chemisorption and pore diffusion based on intra-particle diffusion model. The isotherm model was Freundlich. Though, all tested isotherm models relatively showed good correlation coefficients ranging from 0.969-1.000. The adsorption process was exothermic for Azeh-TDI, with a negative value of -12.812 X 103 KJ/mol. This indicates that the adsorption process for Pb by Azeh-TDI was spontaneous. Adsorption by Azeh2 was endothermic in nature.

Utilization of Powdered Cassava Stem as an Alternative Bioadsorbent for Lead (Pb2+) Removal from Aqueous Solution

2021 ◽  
Vol 1033 ◽  
pp. 82-86
Author(s):  
Tintin Mutiara ◽  
Andira Budi Trimartina ◽  
Rafika Erniza Putri ◽  
Achmad Chafidz
Keyword(s):  
Heavy Metals ◽  
Industrial Waste ◽  
Contact Time ◽  
Metal Ion ◽  
Adsorption Process ◽  
Cellulose Content ◽  
Optimum Conditions ◽  
Adsorption Method ◽  
Cassava Stem ◽  
Mesh Sieve

Industrial waste containing heavy metals can pollute the aquatic environment. One method that can be done to manage heavy waste is the adsorption method that uses adsorbent from cassava stem powder. This research was conducted to utilize cassava stem powder waste for the adsorption of Pb2 + metal ions. Cassava stem powder was mashed until it passed 100 mesh sieve. Cassava stems have a cellulose content of 70-80%, lignin 15-20%, ADF 15-20% and cellulose can be used as an absorber of heavy metals. The adsorption process is carried out with variations in pH, time and concentration under optimum conditions. In this adsorption involves the functional groups contained therein so that the interaction between the adsorbent with the metal ion Pb2 +. Based on the research, the optimum conditions were obtained at pH 6, 180 minutes contact time and 50 ppm concentration. This test is carried out using Atomic Absorption Spectroscopy (AAS).

scholarly journals Preparation, Characterization and Adsorption Potential of Grainy Halloysite-CNT Composites for Anthracene Removal from Aqueous Solution

Nanomaterials ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 890 ◽  
Author(s):  
Gabriela Kamińska ◽  
Mariusz Dudziak ◽  
Edyta Kudlek ◽  
Jolanta Bohdziewicz
Keyword(s):  
Carbon Nanotubes ◽  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Contact Time ◽  
Adsorption Process ◽  
Heating Temperature ◽  
Langmuir Model ◽  
Adsorption Potential ◽  
Adsorption Sites ◽  
Enhanced Adsorption

Grainy Hal-CNT composites were prepared from powder halloysite nanoclay (Hal) and carbon nanotubes (CNTs). The effect of the amount and type of CNTs, as well as calcination temperature on morphology and properties of Hal-CNT composites and their adsorption capacity of anthracene (ANT), were studied. The surface topography of granules was heterogenous, with cracks and channels created during granulation of powder clay and CNTs. In FTIR, spectra were exhibited only in the bands arising from halloysite, due to its dominance in the granules. The increase in the heating temperature to 550 °C resulted in mesoporosity/macroporosity of the granules, the lowest specific surface area (SSA) and poorest adsorption potential. Overall, SSA of all Hal-CNT composites were higher than raw Hal, and by itself, heated halloysite. The larger amount of CNTs enhanced adsorption kinetics due to the more external adsorption sites. The equilibrium was established with the contact time of approximately 30 min for the sample Hal-SWCNT 85:15, while the samples with loading 96:4, it was 60–90 min. Adsorption isotherms for ANT showed L1 type, which is representative for the sorbents with limited adsorption capacity. The Langmuir model described the adsorption process, suggesting a monolayer covering. The sample Hal-SWCNT 85:15 exhibited the highest adsorption capacity of ANT, due to its highest SSA and microporous character.

scholarly journals Phenol removal from aqueous solution using silica and activated carbon derived from rice husk

2019 ◽  
Vol 14 (4) ◽  
pp. 897-907 ◽  
Author(s):  
Hosseinali Asgharnia ◽  
Hamidreza Nasehinia ◽  
Roohollah Rostami ◽  
Marziah Rahmani ◽  
Seyed Mahmoud Mehdinia
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Water Treatment ◽  
Organic Pollutants ◽  
Rice Husk ◽  
Contact Time ◽  
Adsorption Process ◽  
Phenol Removal ◽  
Initial Concentration ◽  
Maximum Removal

Abstract Phenol and its derivatives are organic pollutants with dangerous effects, such as poisoning, carcinogenicity, mutagenicity, and teratogenicity in humans and other organisms. In this study, the removal of phenol from aqueous solution by adsorption on silica and activated carbon of rice husk was investigated. In this regard, the effects of initial concentration of phenol, pH, dosage of the adsorbents, and contact time on the adsorption of phenol were investigated. The results showed that the maximum removal of phenol by rice husk silica (RHS) and rice husk activated carbon (RHAC) in the initial concentration of 1 mgL−1 phenol, 2 gL−1 adsorbent mass, 120 min contact time, and pH 5 (RHS) or pH 6 (RHAC) were obtained up to 91% and 97.88%, respectively. A significant correlation was also detected between increasing contact times and phenol removal for both adsorbents (p < 0.01). The adsorption process for both of the adsorbents was also more compatible with the Langmuir isotherm. The results of this study showed that RHS and RHAC can be considered as natural and inexpensive adsorbents for water treatment.

scholarly journals Paraquat dichloride adsorption from aqueous solution using Carbonized Bambara Groundnut (Vigna subterranean) Shells

2020 ◽  
Vol 12 (1) ◽  
pp. 167-177
Author(s):  
Ayuba Abdullahi Muhammad ◽  
Nyijime Thomas Aondofa
Keyword(s):  
Aqueous Solution ◽  
Water Treatment ◽  
Contact Time ◽  
Adsorption Process ◽  
Bambara Groundnut ◽  
Experimental Result ◽  
Isotherm Model ◽  
Batch Adsorption ◽  
Solution Ph ◽  
Adsorbent Dosage

Carbonized Bambara GroundNut Shell (CBGNS) was used as adsorbent for the adsorption of paraquat dichloride (PQ) from aqueous solution. The prepared adsorbent was characterized using scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy methods. Several parameters that might affect the adsorption process including pH, contact time, adsorbent dosage, temperature and initial concentration were investigated and optimized using batch adsorption technique. Results of the study revealed that maximum removal efficiency (98%) was achieved using 0.05g adsorbent dosage, solution pH of 5 and 60 min of contact time. The equilibrium experimental result revealed that Langmuir model best described the adsorption process with R2 value of 0.956.The heat of adsorption process was estimated from Temkin Isotherm model to be 19.99J/mol and the mean free energy was estimated from Duninin-Radushkevich (DRK) isotherm model to be 0.289KJ/mol indicating chemisorptions process. The kinetic and thermodynamic studies revealed that the adsorption processes followed pseudo-second-order kinetics with R2 value of 0.999 and the value of ∆G (- 27.74 kJ mol-1), ∆H (13.145 kJ mol-1) indicate the spontaneous and endothermic nature of PQ adsorption on CBGNS. The results suggested that CBGNS had the potential to become a promising material for PQ contaminated water treatment. Keywords: Adsorption, Paraquat dichloride, Carbonized Bambara Ground nut shell, Water treatment.

scholarly journals Adsorptive Removal of Congo red dye from wastewater using Fenugreek Powder

2020 ◽  
Author(s):  
Neha bhadauria ◽  
Arjun Suresh
Keyword(s):  
Aqueous Solution ◽  
Congo Red ◽  
Contact Time ◽  
Adsorption Process ◽  
Dye Adsorption ◽  
Textile Dye ◽  
Adsorptive Removal ◽  
Congo Red Dye ◽  
Red Dye ◽  
Maximum Removal

The present study analyzed the efficiency of a naturally derived fenugreek powder for removal of Congo red dye from the aqueous solution. The flocculation Studies on Congo Red (CR) a hazardous, textile dye onto Fenugreek Powder and its adsorption was analyzed. Fenugreek Powder is Eco-friendly, biodegradable and locally available in the market. The dye adsorption process was performed in different batches at varying pH, dye concentration, adsorbent concentration and contact time to get the best results. The result showed that the maximum removal of dye was 42.4% with 10mg/l of Fenugreek powder at pH 4.

scholarly journals Heavy Metal Removal from Aqueous Solution Using Biosurfactants Produced by Pseudomonas aeruginosa with Corn Oil as Substrate

2018 ◽  
Vol 18 (3) ◽  
pp. 472
Author(s):  
Venty Suryanti ◽  
Sri Hastuti ◽  
Tutik Dwi Wahyuningsih ◽  
Mudasir Mudasir ◽  
Dian Kresnadipayana ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Contact Time ◽  
Metal Ion ◽  
Metal Removal ◽  
Corn Oil ◽  
Metal Ion Removal ◽  
Ion Removal ◽  
Removal Capacity

The batch removal of Cu(II), Cd(II) and Pb(II) from individual heavy metal ion aqueous synthetic solution using biosurfactants produced by Pseudomonas aeruginosa with corn oil as substrate was investigated. The metal ion removal process of crude preparation biosurfactants (CPB) was established to be dependent on the initial pH and contact time. The optimum metal removal was observed at pH 6.0 of the initial metal solution and 10 min of contact time. The affinity sequence for metal ion removal was Pb(II)>Cd(II)>Cu(II). The removal capacity value of biosurfactant for Cu(II), Cd(II) and Pb(II) from single metal ions solution were 0.169, 0.276 and 0.323 mg/g, respectively. The removal capacity value of biosurfactant for Cu(II), Cd(II) and Pb(II) from multi metal ions solution were 0.064, 0.215 and 0.275 mg/g, respectively. The removal capacity of individual metal ion was diminished by the presence of other metal ions in multi metal ions from synthetic aqueous solution. The removal capacity value of biosurfactant for Cu(II), Cd(II) and Pb(II) from silver industry wastewater were 0.027, 0.055 and 0.291 mg/g, respectively. The results indicated that biosurfactants have potential to be used in the remediation of heavy metals in industrial wastewater.

scholarly journals PEMANFAATAN ARANG AKTIF SABUT KELAPA SAWIT SEBAGAI ADSOBEN ZAT WARNA SINTETIS REACTIVE RED-120 DAN DIRECT GREEN -26

Alotrop ◽  
2017 ◽  
Vol 1 (1) ◽  
Author(s):  
Melfi Puspita ◽  
M. Lutfi Firdaus ◽  
Nurhamidah Nurhamidah
Keyword(s):  
Adsorption Capacity ◽  
Adsorption Isotherms ◽  
Activated Charcoal ◽  
Contact Time ◽  
Adsorption Process ◽  
Maximum Adsorption Capacity ◽  
Analysis Method ◽  
Optimum Conditions ◽  
Coconut Fiber ◽  
Reactive Red 120

The problem of environmental polution caused by waste of batik industry lately is increasing, so it needed a method to overcome that problem. The aim of this study was to determine the ability of activated charcoal from coconut fiber palm in adsorbing Reactive Red-120 and Direct Green-26 dyes in waste of batik along with determining the parameters of isotherms adsorption using UV-Vis Spectrophotometer analysis method. Variations of pH, contact time, adsorbent weight and temperature were carried out as variable to obtain optimum conditions of the adsorption process. The optimum of conditions for Reactive Red-120  occured at pH 3 and a contact time of 30 minutes, while Direct Green-26  occurred at pH 4 and a contact time of 40 minutes, with each adsorbent weight 150 mg and the temperature 30 °C. Adsorption isotherms determined by Freundlich and Langmuir models with maximum adsorption capacity (Qmax) were obtained for the Reactive Red-120  was 400 mg/g, while Direct Green-26 is 169 mg/g. 

scholarly journals Studies on desorption and regeneration of natural pumice for iron removal from aqueous solution

2018 ◽  
Vol 2017 (2) ◽  
pp. 509-515 ◽  
Author(s):  
S. Indah ◽  
D. Helard ◽  
A. Binuwara
Keyword(s):  
Aqueous Solution ◽  
Removal Efficiency ◽  
Contact Time ◽  
Adsorption Process ◽  
Iron Removal ◽  
Iron Ions ◽  
The Third ◽  
Environmental Friendly ◽  
West Sumatra ◽  
Adsorption Desorption

Abstract To make the adsorption process more economic and environmental friendly, it is necessary to study desorption and reutilization of the adsorbents. In the present study, the effectiveness of natural pumice in removal of iron from aqueous solution was investigated in several sorption-desorption cycles. The desorption characteristics of previously adsorbed iron ions on natural pumice were tested by various desorbing agents such as HCl, NaOH and aquadest. Among them, HCl showed the highest desorption efficiency (37.89%) with 0.1 M of concentration and 60 min of contact time. The removal efficiency of iron ions in reused natural pumice could be maintained up to 90% in the third cycle of adsorption. The results indicate that although complete desorption was not achieved, natural pumice from Sungai Pasak, West Sumatra, Indonesia, can be sufficiently reused up to three cycles of adsorption-desorption.

Sign in / Sign up

Export Citation Format

Share Document