Theoretical and Experimental Researches Regarding the Influence of the Suspension Car Stiffness on the Dynamic Behavior of Vehicles

2016 ◽  
Vol 822 ◽  
pp. 36-43
Author(s):  
Dumitru Neagoe ◽  
Dumitru Bolcu ◽  
Loreta Simniceanu ◽  
Mario Trotea
Keyword(s):  
Mathematical Model ◽  
Dynamic System ◽  
Dynamic Behavior ◽  
Experimental Research ◽  
Experimental Results ◽  
Negative Effects ◽  
Experimental Researches ◽  
The Mathematical Model ◽  
Theoretical Results

In this paper the authors present the results of theoretical and experimental research in order to optimize suspension rigidity in case of Daewoo Nubira vehicle. The paper presents the mathematical model obtained by assimilating car with a dynamic system with 5 rigid solids with elastic and viscous linking between them. Theoretical results obtained based on this model and the experimental results are presented, and it is presented a solution to optimize suspension in order to remove the negative effects observed driving on gravel runways or damaged runaways. Theoretical results, compared with the experimental ones, allow us to say that it is possible to optimize suspension by analyzing specific parameters equivalent mathematical model.

Research on Grasping Force of New Type Pneumatic Flexible Finger

2013 ◽  
Vol 401-403 ◽  
pp. 245-249
Author(s):  
Yun Wei Zhao ◽  
De Xu Geng ◽  
Xiao Min Liu ◽  
Jin Tao Zhang
Keyword(s):  
Mathematical Model ◽  
Modular Design ◽  
Normal Pressure ◽  
Experimental Results ◽  
Flexible Joints ◽  
Grasping Force ◽  
New Type ◽  
The Mathematical Model ◽  
The Relationship ◽  
Theoretical Results

This paper develops a new type of flexible finger employing the pneumatic flexible joints base on the modular design concept. In this work, the mathematical model of the grasping force of the flexible finger is derived and analyzed on the relationship between the air pressure and the grasping force. Further the grasping force experiments of finger using dynamometer and acquire the normal pressure of the finger with different combinations ventilation of joints are conducted, Also, the experimental results are compared with the theoretical results, which confirm the validity of the presented model.

Modelling and Simulation of NO2 Dispersion Phenomenon in Atmosphere by Analytical-Experimental Methods

2008 ◽  
Vol 59 (10) ◽  
Author(s):  
Delia Perju ◽  
Harieta Pirlea ◽  
Gabriela-Alina Brusturean ◽  
Dana Silaghi-Perju ◽  
Sorin Marinescu
Keyword(s):  
Mathematical Model ◽  
Nitrogen Dioxide ◽  
Modeling And Simulation ◽  
Human Health ◽  
Experimental Methods ◽  
Negative Effects ◽  
Real Situation ◽  
Experimental Values ◽  
The Mathematical Model

The European laws and recently the Romanian ones impose more and more strict norms to the large nitrogen dioxide polluters. They are obligated to continuously improve the installations and products so that they limit and reduce the nitrogen dioxide pollution, because it has negative effects on the human health and environment. In this paper are presented these researches made within a case study for the Timi�oara municipality, regarding the modeling and simulation of the nitrogen dioxide dispersion phenomenon coming from various sources in atmosphere with the help of analytical-experimental methods. The mathematical model resulting from these researches is accurately enough to describe the real situation. This was confirmed by comparing the results obtained based on the model with real experimental values.

Transient response of the 1-st order dynamic system with fluctuating parameters

1979 ◽  
Vol 44 (7) ◽  
pp. 2184-2195
Author(s):  
Vladimír Herles ◽  
Jan Čermák ◽  
Antonín Havlíček
Keyword(s):  
Dynamic System ◽  
Dynamic Behavior ◽  
Transient Response ◽  
Flow Model ◽  
Stirred Tank ◽  
Order System ◽  
Random Parameters ◽  
Stirred Tank Reactor ◽  
Tank Reactor ◽  
Theoretical Results

The paper deals with the analysis of the dynamic behavior of the 1st order system with two random parameters. The theoretical results have been compared with experiments on flow model of a stirred tank reactor.

scholarly journals Set-membership identifiability of nonlinear models and related parameter estimation properties

2016 ◽  
Vol 26 (4) ◽  
pp. 803-813 ◽  
Author(s):  
Carine Jauberthie ◽  
Louise Travé-MassuyèEs ◽  
Nathalie Verdière
Keyword(s):  
Mathematical Model ◽  
Parameter Estimation ◽  
Dynamic System ◽  
Nonlinear Models ◽  
Differential Algebra ◽  
Related Parameter ◽  
Set Membership ◽  
Estimation Problems ◽  
The Mathematical Model

Abstract Identifiability guarantees that the mathematical model of a dynamic system is well defined in the sense that it maps unambiguously its parameters to the output trajectories. This paper casts identifiability in a set-membership (SM) framework and relates recently introduced properties, namely, SM-identifiability, μ-SM-identifiability, and ε-SM-identifiability, to the properties of parameter estimation problems. Soundness and ε-consistency are proposed to characterize these problems and the solution returned by the algorithm used to solve them. This paper also contributes by carefully motivating and comparing SM-identifiability, μ-SM-identifiability and ε-SM-identifiability with related properties found in the literature, and by providing a method based on differential algebra to check these properties.

A prey–predator model and control of a nematodes pest using control in banana: Mathematical modeling and qualitative analysis

2021 ◽  
pp. 2150089
Author(s):  
Sudhakar Yadav ◽  
Vivek Kumar
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Local Stability ◽  
Detection Method ◽  
Initial Release ◽  
Pest Detection ◽  
Predator Model ◽  
And Control ◽  
The Mathematical Model ◽  
Theoretical Results

This study develops a mathematical model for describing the dynamics of the banana-nematodes and its pest detection method to help banana farmers. Two criteria: the mathematical model and the type of nematodes pest control system are discussed. The sensitivity analysis, local stability, global stability, and the dynamic behavior of the mathematical model are performed. Further, we also develop and discuss the optimal control mathematical model. This mathematical model represents various modes of management, including the initial release of infected predators as well as the destroying of nematodes. The theoretical results are shown and verified by numerical simulations.

A Modular Code for Real Time Dynamic Simulation of Gas Turbines in Simulink

2002 ◽  
Vol 128 (3) ◽  
pp. 506-517 ◽  
Author(s):  
S. M. Camporeale ◽  
B. Fortunato ◽  
M. Mastrovito
Keyword(s):  
Mathematical Model ◽  
Real Time ◽  
Gas Turbine ◽  
Dynamic Behavior ◽  
Gas Turbines ◽  
Simulation Software ◽  
Computational Time ◽  
High Fidelity ◽  
Time Step ◽  
The Mathematical Model

A high-fidelity real-time simulation code based on a lumped, nonlinear representation of gas turbine components is presented. The code is a general-purpose simulation software environment useful for setting up and testing control equipments. The mathematical model and the numerical procedure are specially developed in order to efficiently solve the set of algebraic and ordinary differential equations that describe the dynamic behavior of gas turbine engines. For high-fidelity purposes, the mathematical model takes into account the actual composition of the working gases and the variation of the specific heats with the temperature, including a stage-by-stage model of the air-cooled expansion. The paper presents the model and the adopted solver procedure. The code, developed in Matlab-Simulink using an object-oriented approach, is flexible and can be easily adapted to any kind of plant configuration. Simulation tests of the transients after load rejection have been carried out for a single-shaft heavy-duty gas turbine and a double-shaft aero-derivative industrial engine. Time plots of the main variables that describe the gas turbine dynamic behavior are shown and the results regarding the computational time per time step are discussed.

Mathematical Modeling of Electrochemical Deburring

2010 ◽  
Vol 126-128 ◽  
pp. 545-550 ◽  
Author(s):  
Wen Ji Xu ◽  
W. Wang ◽  
Xu Yue Wang ◽  
Gui Bing Pang
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Influencing Factors ◽  
Applied Voltage ◽  
Experimental Results ◽  
Electrode Gap ◽  
Workpiece Material ◽  
Burr Height ◽  
Object A ◽  
The Mathematical Model

The drilling burr is taken as the research object. A mathematical model of electrochemical deburring (ECD) is established and the effects of main influencing factors, such as inter-electrode gap, applied voltage and deburring time, on burr height have been analyzed. The results show that the deburring time increases with the increase of initial burr height, inter-electrode gap, with the decrease of volume of electrochemical equivalent of the workpiece material, conductivity of electrolyte and applied voltage. The deburring time for various burr heights can be predicted by the mathematical model. The calculated results obtained from the mathematical model are approximately consistent with the experimental results. The results show that initial burr height h0=0.722mm is removed, and the fillet radius R=0.211mm is obtained.

A High-Fidelity Real-Time Simulation Code of Gas Turbine Dynamics for Control Applications

2002 ◽  
Author(s):  
S. M. Camporeale ◽  
B. Fortunato ◽  
M. Mastrovito
Keyword(s):  
Mathematical Model ◽  
Real Time ◽  
Gas Turbine ◽  
Dynamic Behavior ◽  
Computational Time ◽  
High Fidelity ◽  
Simulation Code ◽  
Real Time Simulation ◽  
Time Simulation ◽  
The Mathematical Model

A novel high-fidelity real-time simulation code based on a lumped, non-linear representation of gas turbine components is presented. The aim of the work is to develop a general-purpose simulation code useful for setting up and testing control equipments. The mathematical model and the numerical procedure are specially developed in order to efficiently solve the set of algebraic and ordinary differential equations that describe the dynamic behavior of the gas turbine engine. The paper presents the model and the adopted solver procedure. The code, developed in Matlab-Simulink using an object-oriented approach, is flexible and can be easily adapted to any kind of plant configuration. For high-fidelity purposes, the mathematical model takes into account the actual composition of the working gases and the variation of the specific heats with the temperature, including a stage-by-stage model of the air-cooled expansion. Simulation tests of the transients after load rejection have been carried out for a single-shaft heavy-duty gas turbine and a double-shaft industrial engine. Time plots of the main variables that describe the gas turbine dynamic behavior are shown and the results regarding the computational time per time step are discussed.

Sign in / Sign up

Export Citation Format

Share Document