Water Barrier Property of Gelatin-Based Films Cross-Linked with Microbial Transglutaminase

2011 ◽  
Vol 335-336 ◽  
pp. 1391-1395 ◽  
Author(s):  
De Yi Zhu ◽  
Li Qiang Jin ◽  
Yu Lu Wang ◽  
Hai Xia Ren
Keyword(s):  
Water Vapor ◽  
Significant Influence ◽  
Water Vapor Permeability ◽  
Microbial Transglutaminase ◽  
Barrier Property ◽  
Cross Linking ◽  
Vapor Permeability ◽  
Dense Network ◽  
Water Barrier ◽  
Gelatin Concentration

In this paper, gelatin-based films were prepared by mixing gelatin with glycerol, and microbial transglutaminase (mTG) which was used as cross linking agent. The result of SEM confirmed that a dense network structure was formed after mTG treatment comparing to the native. The effect of mTG on water barrier property of films was investigated by measuring the water vapor permeability (WVP). The results showed that the concentration of gelatin has a significant influence on the water barrier property of gelatin-based film which was treated with mTG. The WVP value of the films decreased sharply after enzymatic cross-linking when gelatin concentration increased to 8%, while no evident change of the WVP can be found when the gelatin concentrations was lower than 8%.

scholarly journals Effect of cellulose nanofibers concentration on mechanical, optical, and barrier properties of gelatin-based edible films

DYNA ◽  
2015 ◽  
Vol 82 (191) ◽  
pp. 219-226 ◽  
Author(s):  
Ricardo David Andrade Pizarro ◽  
Olivier Skurtys ◽  
Fernando Osorio-Lira
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Cellulose Nanofibers ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Edible Films ◽  
Mechanical Tests ◽  
Vapor Permeability ◽  
Glycerol Concentration ◽  
Gelatin Concentration

The effect of gelatin, glycerol, and cellulose nanofiber (CNFs) concentrations on the mechanical properties, water vapor permeability, and color parameters of films was evaluated. The results indicate that the color is only affected by the gelatin concentration. Mechanical tests indicated that with increasing concentration of gelatin and CNFs, there is an increase in tensile strength, whereas an increase in glycerol concentration causes an increase in elongation, making the films more flexible. An increased concentration of gelatin and glycerol makes the film more permeable to water vapor, while an increase in the concentration of CNFs reduces this property. Finally, the addition of CNFs to gelatin-based films improves their mechanical and barrier properties (water vapor) without affecting the appearance (color) of the films.

Biomimetic Water Vapor Barrier Composite Films

2012 ◽  
Vol 200 ◽  
pp. 356-359
Author(s):  
Li Han ◽  
Jia Jun Wang ◽  
Jie Shen ◽  
Chang Gao
Keyword(s):  
Water Vapor ◽  
Cell Layer ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Cross Linking ◽  
Vapor Permeability ◽  
Drying Temperature ◽  
Water Vapor Barrier ◽  
Apple Peel ◽  
New Type

A new type of barrier composite film, imitating the structure of apple peel, was prepared in this study. Paraffins, sodium alginate, stearic acid and carboxymethyl cellulose were used to mimic the wax layer, cuticle, pectin layer and single-cell layer of the apple peel, respectively. Different factors have been considered to determine their effects on the water vapor permeability of the films, such as drying temperature, cross-linking agents and thickness of the membranes. The results showed that composite films showed good barrier property in the condition of drying temperature of 60°C and cross-linking agents concentration of 15 mg/ml. The imitating cutinmembrane layer played an important role on resisting water vapor.

Permeability of Packaging Materials

2014 ◽  
Vol 904 ◽  
pp. 192-194
Author(s):  
Sheng Zhang ◽  
Wen Chao Gu ◽  
Zheng Yong Cheng ◽  
Wen Juan Gu ◽  
Ying Li
Keyword(s):  
Water Vapor ◽  
Food Industry ◽  
Food Packaging ◽  
Gas Permeability ◽  
Water Vapor Permeability ◽  
Packaging Material ◽  
Barrier Property ◽  
Vapor Permeability ◽  
Packaging Materials

The harmful ingredients in packaging materials and containers usually migrate to food during the machining and printing period. The permeability of packaging materials is very important for the food packaging safety. Several commonly used packaging materials were researched in this paper. Their permeability was characterized including the gas permeability, light-transmitting property, and the water vapor permeability. Some technologies which could improve the barrier property were brought forward. And the factors that impact the permeability were discussed in this research. Research on the permeability of packaging material is significant for food industry.

Ultraviolet blocking and antioxidant polyvinyl alcohol films incorporated with baicalin extraction from Scutellaria baicalensis Georgi

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Jinshu Liu ◽  
Xiaoyan Ma ◽  
Wenzhao Shi ◽  
Jianwei Xing ◽  
Chaoqun Ma ◽  
...  
Keyword(s):  
Water Vapor ◽  
Polyvinyl Alcohol ◽  
Radical Scavenging Activity ◽  
Antioxidant Properties ◽  
Radical Scavenging ◽  
Water Vapor Permeability ◽  
Scutellaria Baicalensis ◽  
Vapor Permeability ◽  
Protective Film ◽  
Uv Blocking

Abstract Baicalin, an active flavonoid ingredient of Scutellaria baicalensis Georgi, was extracted by heat reflux extraction and showed the same significance UV absorption property with standard baicalin. Active films were prepared from polyvinyl alcohol (PVA) containing baicalin extract by casting method. The effect of baicalin extracts on the UV-blocking, optical, antioxidant property, water vapor permeability, swelling and mechanical properties of the films were studied. UV–vis transmittance spectra showed that PVA films incorporated with baicalin extract blocked ultraviolet light range from 280–400 nm even with low concentration of baicalin (0.5 wt%) and maintain the high transparency in visible spectrum. The outstanding UV-blocking properties of PVA films incorporated with baicalin extract were also confirmed by Rhodamine B degradation. Baicalin conferred antioxidant properties to PVA films as determined by DPPH radical scavenging activity. Due to the interaction between hydroxy groups of baicalin and PVA molecule, water vapor permeability, swelling and elongation at break of the films were decreased accompanied with the increasing in tensile strength and Young’s modulus. FTIR reveal that the interaction between PVA molecules was significant changed by the introduction of baicalin. These results suggest that PVA film incorporated with baicalin extract can be used for the development of functional protective film.

scholarly journals The Effect of Extraction Conditions on the Barrier and Mechanical Properties of Kefiran Films

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 602
Author(s):  
Carmen Rodica Pop ◽  
Teodora Emilia Coldea ◽  
Liana Claudia Salanţă ◽  
Alina Lăcrămioara Nistor ◽  
Andrei Borşa ◽  
...  
Keyword(s):  
Water Vapor ◽  
Conformational Changes ◽  
Water Vapor Permeability ◽  
Edible Films ◽  
Film Structure ◽  
Water Soluble ◽  
Vapor Permeability ◽  
Water Molecules ◽  
Compact Structure ◽  
Technology Applications

Kefiran is an exopolysaccharide classified as a heteropolysaccharide comprising glucose and galactose in equimolar quantities, and it is classified as a water-soluble glucogalactan. This work aimed to investigate the effect of different extraction conditions of kefiran on the structural and physical properties of the edible films obtained. Fourier-transform infrared spectroscopy and scanning electron microscopy were performed, together with a determinations of moisture content, solubility, water vapor permeability and degree of swelling. The kefiran films presented values of the water vapor permeability between 0.93 and 4.38 × 10−11 g/m.s.Pa. These results can be attributed to the development of a more compact structure, where glycerol had no power to increase the free volume and the water vapor diffusion through their structure. The possible conformational changes in the kefiran film structure, due to the interspersing of the plasticizers and water molecules that they absorb, could be the reason for producing flexible kefiran films in the case of using glycerol as a plasticizer at 7.5% w/w. Moreover, it was observed that the extraction conditions are a significant factor in the properties of these films and their food technology applications.

scholarly journals Development of PE/PCL Bilayer Films Modified with Casein and Aluminum Oxide

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3090
Author(s):  
Anita Ptiček Siročić ◽  
Ana Rešček ◽  
Zvonimir Katančić ◽  
Zlata Hrnjak-Murgić
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Water Vapor ◽  
Aluminum Oxide ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Mechanical And Thermal Properties ◽  
Oxide Compound ◽  
Bilayer Films ◽  
Oxide Particles

The studied samples were prepared from polyethylene (PE) polymer which was coated with modified polycaprolactone (PCL) film in order to obtain bilayer films. Thin PCL film was modified with casein/aluminum oxide compound to enhance vapor permeability as well as mechanical and thermal properties of PE/PCL films. Casein/aluminum oxide modifiers were used in order to achieve some functional properties of polymer film that can be used in various applications, e.g., reduction of water vapor permeability (WVTR) and good mechanical and thermal properties. Significant improvement was observed in mechanical properties, especially in tensile strength as well as in water vapor values. Samples prepared with aluminum oxide particles indicated significantly lower values up to 60%, and samples that were prepared with casein and 5% Al2O3 showed the lowest WVTR value.

scholarly journals Enzymatic and Chemical Cross-Linking of Bacterial Cellulose/Fish Collagen Composites—A Comparative Study

2021 ◽  
Vol 22 (7) ◽  
pp. 3346
Author(s):  
Agata Sommer ◽  
Paulina Dederko-Kantowicz ◽  
Hanna Staroszczyk ◽  
Sławomir Sommer ◽  
Marek Michalec
Keyword(s):  
Thermal Stability ◽  
Bacterial Cellulose ◽  
Secondary Alcohol ◽  
Water Vapor Permeability ◽  
Polymer Chains ◽  
Cross Linking ◽  
Vapor Permeability ◽  
Covalent Bonds ◽  
Fish Collagen ◽  
Chemical Cross Linking

This article compares the properties of bacterial cellulose/fish collagen composites (BC/Col) after enzymatic and chemical cross-linking. In our methodology, two transglutaminases are used for enzymatic cross-linking—one recommended for the meat and the other proposed for the fish industry—and pre-oxidated BC (oxBC) is used for chemical cross-linking. The structure of the obtained composites is characterized by scanning electron microscopy, thermogravimetric analysis, X-ray diffraction, and Fourier transform infrared spectroscopy, and their functional properties by mechanical and water barrier tests. While polymer chains in uncross-linked BC/Col are intertwined by H-bonds, new covalent bonds in enzymatically cross-linked ones are formed—resulting in increased thermal stability and crystallinity of the material. The C2–C3 bonds cleavage in D-glucose units, due to BC oxidation, cause secondary alcohol groups to vanish in favor of the carbonyl groups’ formation, thus reducing the number of H-bonded OHs. Thermal stability and crystallinity of oxBC/Col remain lower than those of BC/Col. The BC/Col formation did not affect tensile strength and water vapor permeability of BC, but enzymatic cross-linking with TGGS improved them significantly.

scholarly journals Upcycling of Vine Shoots: Production of Fillers for PHBV-Based Biocomposite Applications

2020 ◽  
Author(s):  
Grégoire David ◽  
Laurent Heux ◽  
Stéphanie Pradeau ◽  
Nathalie Gontard ◽  
Hélène Angellier-Coussy
Keyword(s):  
Water Vapor ◽  
Gas Phase ◽  
Mechanical Performance ◽  
Low Cost ◽  
Water Vapor Permeability ◽  
Contact Angles ◽  
Vapor Permeability ◽  
Water Contact ◽  
Median Diameter ◽  
Cost Of Materials

Abstract This paper aims at investigating the potential of vine shoots (ViSh) upcycling as fillers in novel poly(3-hydroxybutyrate-3-hydroxyvalerate) (PHBV) based biocomposites. ViSh particles of around 50 µm (apparent median diameter) were obtained combining dry grinding processes, and mixed with PHBV using melt extrusion. Thermal stability and elongation at break of biocomposites were reduced with increasing contents of ViSh particles (10, 20 and 30 wt%), while Young’s modulus and water vapor permeability were increased. It was shown that a surface gas-phase esterification allowed to significantly increase the hydrophobicity of ViSh particles (increase of water contact angles from 59° to 114°), leading to a reduction of 27% in the water vapor permeability of the biocomposite filled with 30 wt% of ViSh. The overall mechanical performance was not impacted by gas-phase esterification, demonstrating that the interfacial adhesion between the virgin ViSh particles and the PHBV matrix was already good and that such filler surface treatment was not required in that case. It was concluded that ViSh particles can be interestingly used as low cost fillers in PHBV-based biocomposites to decrease the overall cost of materials.

Sign in / Sign up

Export Citation Format

Share Document