The Adsorption Behavior of Reactive Dye on Magnetic Chitosan Coated Cotton Fibers

2011 ◽  
Vol 396-398 ◽  
pp. 2198-2201
Author(s):  
Xue Mei He ◽  
Kong Liang Xie
Keyword(s):  
Aqueous Solution ◽  
Crosslinking Agent ◽  
Reactive Dye ◽  
Adsorption Behavior ◽  
Experimental Conditions ◽  
Magnetic Chitosan ◽  
Pseudo Second Order ◽  
Basic Solutions ◽  
Kinetics Of ◽  
Coated Cotton

A new composite magnetic chitosan coated cotton (MSCC) fiber with 3-glycidyloxypropyltrimethoxysilane (GPTMS) as a crosslinking agent was prepared for the adsorption of C.I. Reactive red 194 from aqueous solution. The structure and morphology of MSCC fibers were analyzed by FTIR and SEM. The adsorption behavior of C.I. Reactive red 194 from aqueous solution onto MSCC fibers was investigated under various experimental conditions such as initial concentration of the dyes, temperature, pH and adsorb time. Experimental data indicated that the adsorption capacity of MSCC fibers on C.I. Reactive red 194 was higher in acidic rather than in basic solutions. A rise of temperature accelerates mass transfer of dyes into the MSCC fibers. The kinetics of the interactions was best described by pseudo-second-order mechanism.

scholarly journals Adsorption behavior of Fe (III) in aqueous solution on melamine

2020 ◽  
Vol 82 (9) ◽  
pp. 1848-1857
Author(s):  
Hao Peng ◽  
Jing Guo ◽  
Bingqing Wang
Keyword(s):  
Aqueous Solution ◽  
Reaction Time ◽  
Reaction Temperature ◽  
Processing Parameters ◽  
Adsorption Behavior ◽  
Experimental Conditions ◽  
Optimal Processing ◽  
Waste Effluents ◽  
Pseudo Second Order ◽  
Standard Enthalpy Change

Abstract This paper focused on the adsorption behavior of Fe (III) in aqueous solution on melamine. The effects of experimental conditions including dosage of melamine, reaction time and reaction temperature were investigated. The results showed that nearly 99% Fe (III) was adsorbed under the optimal conditions: melamine dosage (mole ratio) at n(C3H6N6)/n(Fe) = 3.5:1, reaction time of 60 min and reaction temperature of 90 °C. The optimal processing factors were obtained from response surface methodology and the effects of processing parameters on the removal efficiency of Fe (III) followed the order: mole ratio (n(C3N6H6):n(Fe)) > reaction temperature > reaction time. The adsorption kinetics behavior was fitted well with the pseudo-second-order model. The thermodynamic study showed that the adsorption process was unspontaneous and endothermic. The value of free energy change and standard enthalpy change disclosed that the mechanism of adsorption onto melamine was physisorption. The results will be useful for further applications of system design in the treatment of practical waste effluents.

Synthesis, Adsorption Behavior of a Maleamic Acid Cross-Linked β- Cyclodextrin Polymer for Removal of Basic Fuchsin in Aqueous Solution

2014 ◽  
Vol 937 ◽  
pp. 9-16
Author(s):  
Xiao Mei Zhang ◽  
Hong Zhan Li ◽  
Man Li Cao ◽  
Chao Yue Chen
Keyword(s):  
Aqueous Solution ◽  
Adsorption Behavior ◽  
Basic Fuchsin ◽  
Order Model ◽  
Kinetics Of Adsorption ◽  
Langmuir Adsorption ◽  
Adsorption Capacities ◽  
Pseudo Second Order ◽  
Maleamic Acid ◽  
Kinetics Of

A crosslinked β-cyclodextrin (β-CD) polymer (PCD) was synthesized by using maleamic acid as a crosslinked agent, and its adsorption behavior for basic fuchsin in aqueous solution was investigated. The adsorption isotherms could be well fitted by the Langmuir adsorption equation. On the basis of the Langmuir analysis, the maximum adsorption capacities were determined to be 33.56 mg·g-1 at 308K. The kinetics of adsorption followed the pseudo-second-order model.

scholarly journals The nature and kinetics of 2,4-dimethylphenol adsorption in aqueous solution on biochar derived from Sargassum boveanum macroalgae

2020 ◽  
Vol 69 (5) ◽  
pp. 438-452 ◽  
Author(s):  
Mazen K. Nazal ◽  
Durga Rao ◽  
Nabeel Abuzaid
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Maximum Adsorption Capacity ◽  
Solution Ph ◽  
Experimental Conditions ◽  
Freundlich Model ◽  
Adsorptive Removal ◽  
Adsorbate Concentration ◽  
Pseudo Second Order ◽  
Kinetics Of

Abstract Many industries produce 2,4-dimethylphenol (DMP) compound in the wastewater which is persistent, toxic, and carcinogenic. Therefore, an adsorbent was prepared by carbonizing a dried Sargassum boveanum macroalgae. The prepared biosorbent was investigated for adsorptive removal of DMP from aqueous solution. After carbonization, the biochar derived from S. boveanum macroalgae (BCM) removed almost 100% of DMP adsorbate. Effects of contact time, solution pH, adsorbate concentration, adsorbent mass, and temperature have been studied. It has been found that, within the experimental conditions, the maximum adsorption capacity is 17 mg/g, rate of adsorption follows pseudo-second order kinetics and the adsorption isotherm experimental data fit the Freundlich model. The thermodynamic parameters were calculated and it has been found that the adsorption of DMP on BCM is endothermic and thermodynamically favorable, and in addition the surface of BCM adsorbent shows affinity to the DMP molecules. The BCM adsorbent has the capability to remove around 65% of DMP from high saline seawater contaminated with DMP. Moreover, the prepared BCM adsorbent was reusable for at least four times in seawater for removal of DMP contaminant.

scholarly journals Study of the adsorption capacity of Fe(II) dissolved in water by using a mineral rich in Manganese Dioxide (MnO2) from Colombia

DYNA ◽  
2016 ◽  
Vol 83 (196) ◽  
pp. 223-228 ◽  
Author(s):  
Jhonnathan Machado-Infante ◽  
Gustavo Ramírez-Caballero ◽  
Martha Juliana Barajas Meneses
Keyword(s):  
Aqueous Solution ◽  
Raman Spectroscopy ◽  
Water Treatment ◽  
Adsorption Capacity ◽  
Open Systems ◽  
Kinetics Of Adsorption ◽  
Equilibrium And Kinetics ◽  
Pseudo Second Order ◽  
Potential Alternative ◽  
Kinetics Of

<p>In Colombia, a mineral rich in MnO<sub>2</sub> is extracted from the mines of Mallama, Nariño. In this work we studied the adsorption capacity of this mineral for Fe(II) dissolved in aqueous solution of open systems. The characterization was done through ICP-AES, XRF and Raman spectroscopy. The effect of different pretreatments on the mineral with oxidizing agents such as KMnO<sub>4</sub> and NaClO was evaluated. Studies of equilibrium and kinetics of adsorption showed that the mechanism fits well to the Langmuir isotherm and its kinetics to a model of pseudo-second order. At the conditions studied was found that the adsorption capacity for the mineral modified with KMnO<sub>4</sub> and NaOCl were 59.209 and 51.279 mg/g respectively. It is concluded that the mineral is a potential alternative in water treatment.</p>

scholarly journals Removal Effect of Atrazine in Co-Solution with Bisphenol A or Humic Acid by Different Activated Carbons

Materials ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 2558 ◽  
Author(s):  
Zhansheng Wu ◽  
Xinhui Wei ◽  
Yongtao Xue ◽  
Xiufang He ◽  
Xia Yang
Keyword(s):  
Humic Acid ◽  
Bisphenol A ◽  
Adsorption Kinetics ◽  
Competitive Adsorption ◽  
Activated Carbons ◽  
Second Order ◽  
Adsorption Behavior ◽  
Single Solution ◽  
Pseudo Second Order ◽  
Kinetics Of

Activated carbons (ACs) based on apricot shells (AS), wood (W), and walnut shells (WS) were applied to adsorb atrazine in co-solutions. To study the effect of Bisphenol A (BPA) on the adsorption behavior of atrazine, the adsorption performance of ACs for BPA in single solution was studied. The results demonstrated that the adsorption kinetics of BPA fitted the pseudo-second-order model, the adsorption isotherms of BPA followed the Langmuir model. Meanwhile, the adsorption kinetics of atrazine fitted the pseudo-second-order kinetics model and the isotherm was consistent with the Freundlich model both in single solution and co-solution. In addition, competitive adsorption was observed when atrazine coexisted with BPA or humic acid. For the adsorption capacity, the adsorption amount of ASAC, WAC, and WSAC for atrazine obviously decreased by 18.0%, 30.0%, and 30.3% in the presence of BPA, respectively, which was due to the π−π interactions, hydrophobic interactions, and H-bonds, resulting in the competitive adsorption between atrazine and BPA. This study contributes to the further understanding of the adsorption behavior for atrazine in co-solution.

Kinetics of Glyphosate Adsorption on Composite Resin from Aqueous Solution

2013 ◽  
Vol 803 ◽  
pp. 157-160
Author(s):  
Zhen Zhen Kong ◽  
Dong Mei Jia ◽  
Su Wen Cui
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Composite Resin ◽  
Order Equation ◽  
Second Order ◽  
First Order ◽  
Basic Resin ◽  
Pseudo Second Order ◽  
Kinetics Of ◽  
Best Fit

The composite weakly basic resin (D301Fe) was prepared and examined using scanning electron microscopy and Fourier transform infrared spectroscopy. The adsorption kinetics of glyphosate from aqueous solution onto composite weakly basic resin (D301Fe) were investigated under different conditions. The experimental data was analyzed using various adsorption kinetic models like pseudo-first order, the pseudo-second order, the Elovich and the parabolic diffusion models to determine the best-fit equation for the adsorption of glyphosate onto D301Fe. The results show that the pseudo-second order equation fitted the experimental data well and its adsorption was chemisorption-controlled.

Study on Adsorption of U(VI) From Aqueous Solution by Activated MgO

2017 ◽  
Author(s):  
Qingqing Liu ◽  
Xiaoyan Li
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Removal Rate ◽  
Freundlich Isotherm ◽  
Batch System ◽  
15Mg Dose ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Kinetics Of

The activated MgO was synthesized by microwave homo-precipitator method and characterized by SEM, EDS and FT-IR methods. It was used to adsorption of U(VI) from aqueous solution with batch system. The paper discussed the effect of pH, temperature, contact time, adsorbent dose and initial U(VI) concentration on the adsorption. The results showed that activated MgO has good adsorption capacity for U(VI), the removal rate and equilibrium adsorption capacity reached 83.5% and 84.04mg·g−1 at pH 5.0, 15mg dose and 313K,respectively. The adsorption kinetics of U(VI) onto activated MgO were better fitted with pseudo-second-order kinetic.The adsorption isotherm data were fitted well to Freundlich isotherm model.The thermodynamic parameters showed that the adsorption process is endothermic and spontaneous.

Adsorption Kinetics of Zn(II) from Aqueous Solutions onto Epichlorohydrin Crosslinked Chitosan

2012 ◽  
Vol 463-464 ◽  
pp. 7-11 ◽  
Author(s):  
Ming Yan Dang ◽  
Hong Min Guo ◽  
Yan Kun Tan
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Kinetics ◽  
Ph Value ◽  
Crosslinking Agent ◽  
Second Order ◽  
Order Model ◽  
Pseudo Second Order ◽  
Crosslinked Chitosan ◽  
Kinetics Of ◽  
Second Order Model

Chitosan was crosslinked using epichlorohydrin as crosslinking agent to prepare crosslinked chitosan which was used as an adsorbent for the removal of Zn(II) from aqueous solutions. The adsorption prosperities of Zn(II) on crosslinked chitosan were studied, including the influence of pH value and the adsorption kinetics. The kinetics of adsorption was discussed using two kinetic models, the pseudo first-order and the pseudo second-order model. Results reveal that the crosslinked chitosan is suitable as adsorbent to remove Zn(II) from dilute solution. The rate parameters for the Zn(II) by crosslinked chitosan were also determined. It was shown that the adsorption kinetics of Zn(II) could be best described by the pseudo second-order model and the adsorption process may involve a physical adsorption.

Sign in / Sign up

Export Citation Format

Share Document