Numerical Controlled Process of Tube Plate and Baffles on Tubular Heat Exchangers

2012 ◽  
Vol 462 ◽  
pp. 855-859
Author(s):  
Shi Wei Li ◽  
Zheng Fang Wang
Keyword(s):  
Heat Exchangers ◽  
Mathematics Model ◽  
Tube Plate ◽  
Shell Side ◽  
Machining Center ◽  
Traditional Process ◽  
The Cost

Tube plate and baffles are all important parts in tubular heat exchangers, drilling holes on them is an important and difficult task for factory. The efficiency of traditional process is low and the error is big. Analyzed the holes’ distributing on six shell side routes exchangers, established mathematics model, compiled numerical controlled program with EIA code, realized numerical controlled process of tube plate and baffles on MITSUBISHI machining center. This improved the quality of equipment and lowered the cost.

Design and Optimization of the Hydraulic Incline Drawing Lifting Mechanism

2011 ◽  
Vol 109 ◽  
pp. 340-344
Author(s):  
Wei Yan Shang ◽  
Fa Ju Qiu
Keyword(s):  
Optimization Design ◽  
Programming Method ◽  
Mathematics Model ◽  
Domestic Waste ◽  
Design And Optimization ◽  
Working Principle ◽  
The Cost

A new lifting-unloading machine of domestic waste was proposed, and the equipment’s working principle was introduced. Mathematics model of optimization design was established. Instead of using traditional programming method, the configuration was optimized by using MATLAB and the Optimization Toolbox offered by MATLAB. The cost of this equipment was reduced and the quality of stabilization was improved.

Perancangan dan Pembuatan Alat Bantu Meja Putar untuk Mesin Cnc 4 Axis

2016 ◽  
Vol 10 (2) ◽  
pp. 162-171
Author(s):  
Hafid Hafid ◽  
Tatang Sutisna
Keyword(s):  
Processing Time ◽  
Rotary Table ◽  
Engineering Process ◽  
Cnc Machine ◽  
Economical Analysis ◽  
Machining Center ◽  
Design And Manufacturing ◽  
The Cost ◽  
Productivity And Competitiveness

The design and manufacturing of the rotary table with the specification Ø 170 mm (6 inches) for CNC machine 4 axis has been done. The objective of manufacturing a rotary table is to increase the efficiency of CNC machine Hardford 4 axis to be above 80% in line machining center CV. IM’s workshop. The engineering methods was taken, consist of: working preparation, manufacturing of working drawing, engineering process, the manufacturing and testing. The prototype has been tested and operated, the resulting of increasing productivity of which were as follows: the process of assembling was increased to be 3 time ( before 1 time) and processing time for a specific case reduced from 5 hours to 3 hours, number of operators for the case of assembling the rotary reduced to 1 person (before 4 persons), safety and security become to be better. The results show increased efficiency of CNC machine Hardford, from under 50% to be above 80%. Based on the economical analysis obtained by the cost of good sold (C.G.S) of the rotary table is IDR 34.060.000. The results presented in this paper is expected to be case study for developing a business of the metal and engineering SMEs domestic to the effort of improving efficiency, quality, productivity and competitiveness in global market.ABSTRAKPerancangan dan pembuatan alat bantu meja putar (rotary table) dengan spesifikasi teknis Ø 170 mm (6 inci) untuk mesin CNC 4 axis telah dilakukan. Tujuan pembuatan rotary table adalah untuk meningkatkan efisiensi mesin CNC Hardford 4 axis di atas 80% pada line machining center Bengkel CV. IM. Metode rancang bangun yang dilakukan, meliputi: persiapan kerja, pembuatan gambar kerja, proses engineering, pembuatan dan uji coba. Prototip tersebut telah diuji coba dan dioperasikan dengan hasil peningkatan produktivitas sebagai berikut: proses pengerjaan bongkar pasang meningkat menjadi 3 kali (sebelumnya 1 kali) dan waktu pengerjaan untuk kasus tertentu berkurang dari 5 jam menjadi 3 jam, jumlah operator untuk kasus bongkar pasang rotary berkurang menjadi 1 orang (sebelumnya 4 orang), keselamatan kerja dan keamanan menjadi lebih baik. Hasil peningkatan berupa efisiensi mesin CNC Hardford 4 axis dari sebelumnya di bawah 50% menjadi di atas 80%. Berdasarkan hasil perhitungan analisis ekonomi diperoleh harga pokok produksi (HPP) alat bantu meja putar adalah sebesar Rp. 34.060.000. Bahasan ini diharapkan menjadi contoh kasus bagi pengembangan usaha IKM logam dan mesin dalam negeri untuk meningkatkan efisiensi, mutu, produktivitas dan keunggulan daya saing di pasar global.Kata kunci: alat bantu meja putar, mesin CNC, harga pokok produksi

Pengaruh Kompetensi Coder terhadap Keakuratan dan Ketepatan Pengkodean Menggunakan ICD 10 di Rumah Sakit X Pekanbaru Tahun 2016

2018 ◽  
Vol 1 (1) ◽  
pp. 31-43
Author(s):  
Nur Maimun ◽  
Jihan Natassa ◽  
Wen Via Trisna ◽  
Yeye Supriatin
Keyword(s):  
Medical Record ◽  
Human Error ◽  
Medical Personnel ◽  
Quality Of Data ◽  
Accuracy And Precision ◽  
Result Show ◽  
Study Implementation ◽  
Icd 10 ◽  
The Cost

The accuracy in administering the diagnosis code was the important matter for medical recorder, quality of data was the most important thing for health information management of medical recorder. This study aims to know the coder competency for accuracy and precision of using ICD 10 at X Hospital in Pekanbaru. This study was a qualitative method with case study implementation from five informan. The result show that medical personnel (doctor) have never received a training about coding, doctors writing that hard and difficult to read, failure for making diagnoses code or procedures, doctor used an usual abbreviations that are not standard, theres still an officer who are not understand about the nomenclature and mastering anatomy phatology, facilities and infrastructure were supported for accuracy and precision of the existing code. The errors of coding always happen because there is a human error. The accuracy and precision in coding very influence against the cost of INA CBGs, medical and the committee did most of the work in the case of severity level III, while medical record had a role in monitoring or evaluation of coding implementation. If there are resumes that is not clearly case mix team check file needed medical record the result the diagnoses or coding for conformity. Keywords: coder competency, accuracy and precision of coding, ICD 10

ABOUT NECESSITY OF MATHEMATICAL MODELING OF THE BUSINESS PROCESS OF COST ESTIMATE CALCULATIONS IN THE CONSTRUCTION OF OIL AND GAS FACILITIES

2017 ◽  
pp. 139-145
Author(s):  
R. I. Hamidullin ◽  
L. B. Senkevich
Keyword(s):  
Mathematical Modeling ◽  
Quality Assessment ◽  
Business Process ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Gas Industry ◽  
Construction Organizations ◽  
The Cost ◽  
Cost Of Construction

A study of the quality of the development of estimate documentation on the cost of construction at all stages of the implementation of large projects in the oil and gas industry is conducted. The main problems that arise in construction organizations are indicated. The analysis of the choice of the perfect methodology of mathematical modeling of the investigated business process for improving the activity of budget calculations, conducting quality assessment of estimates and criteria for automation of design estimates is performed.

Return on Invesment (ROI) of Software Product: A Systematic Literature Review

2015 ◽  
Vol 6 (1) ◽  
pp. 50-57
Author(s):  
Rizqa Raaiqa Bintana ◽  
Putri Aisyiyah Rakhma Devi ◽  
Umi Laili Yuhana
Keyword(s):  
Return On Investment ◽  
Assessment Criteria ◽  
Software Product ◽  
And Performance ◽  
Rational Consideration ◽  
Actual Return ◽  
The Cost ◽  
Investment Models ◽  
The Impact

The quality of the software can be measured by its return on investment. Factors which may affect the return on investment (ROI) is the tangible factors (such as the cost) dan intangible factors (such as the impact of software to the users or stakeholder). The factor of the software itself are assessed through reviewing, testing, process audit, and performance of software. This paper discusses the consideration of return on investment (ROI) assessment criteria derived from the software and its users. These criteria indicate that the approach may support a rational consideration of all relevant criteria when evaluating software, and shows examples of actual return on investment models. Conducted an analysis of the assessment criteria that affect the return on investment if these criteria have a disproportionate effort that resulted in a return on investment of a software decreased. Index Terms - Assessment criteria, Quality assurance, Return on Investment, Software product

Strategy for Protecting the North Sea: A Chemical Industry Perspective

1991 ◽  
Vol 24 (10) ◽  
pp. 269-276
Author(s):  
J. R. Lawrence ◽  
N. C. D. Craig
Keyword(s):  
North Sea ◽  
Chemical Industry ◽  
Important Research ◽  
The Public ◽  
The North ◽  
Anthropogenic Inputs ◽  
Seven Principles ◽  
The North Sea ◽  
The Cost

The public has ever-rising expectations for the environmental quality of the North Sea and hence of everreducing anthropogenic inputs; by implication society must be willing to accept the cost of reduced contamination. The chemical industry accepts that it has an important part to play in meeting these expectations, but it is essential that proper scientific consideration is given to the potential transfer of contamination from one medium to another before changes are made. A strategy for North Sea protection is put forward as a set of seven principles that must govern the management decisions that are made. Some areas of uncertainty are identified as important research targets. It is concluded that although there have been many improvements over the last two decades, there is more to be done. A systematic and less emotive approach is required to continue the improvement process.

Effects and Risks of Distance Learning in Higher Education

2020 ◽  
pp. 61-73
Author(s):  
Yu. M. Tsygalov
Keyword(s):  
Higher Education ◽  
Distance Learning ◽  
Online Education ◽  
New Technology ◽  
Negative Consequences ◽  
Higher Education System ◽  
First Results ◽  
Spread Of Infection ◽  
The Cost

The forced work of Russian universities remotely in the context of the pandemic (COVID-19) has generated a lot of discussion about the benefits of the new form of education. The first results were summed up and reports were presented, the materials of which showed that the main goal of online education — the prevention of the spread of infection, - has been achieved. Against this background, proposals and publications have appeared substantiating the effectiveness of the massive introduction of distance learning in Russia, including in higher education. However, the assessment of such training by the population and students in publications and in social networks was predominantly negative and showed that the number of emerging problems exceeds the possible benefits of the new educational technology. Based on the analysis of the materials of publications and personal experience of teaching online, the potential benefits and problems of distance learning in higher education in Russia are considered. It is proposed to consider the effects separately for the suppliers of new technology (government, universities) and consumers (students, teachers, society). It is substantiated that the massive introduction of online education allows not only to reduce the negative consequences of epidemics, but also to reduce budgetary funding for universities, optimize the age composition of teachers, and reduce the cost of maintaining educational buildings. However, there will be a leveling / averaging of the quality of education, and responsibility for the quality of training will shift from the state/universities to students. The critical shortcomings of online education are the low degree of readiness of the digital infrastructure, the lack of a mechanism for identifying and monitoring the work of students, information security problems, and the lack of trust in such training of the population. The massive use of online education creates a number of risks for the country, the most critical of which is the destruction of the higher education system and a drop in the effectiveness of personnel training. The consequences of this risk realization are not compensated by any possible budget savings.

Sign in / Sign up

Export Citation Format

Share Document