Synergistic Effect of Lysozyme and Vitamin B1 on the Corrosion Inhibition of Carbon Steel in Sulphuric Acid

2012 ◽  
Vol 463-464 ◽  
pp. 895-899 ◽  
Author(s):  
Feng Wang ◽  
Xuan De Ji ◽  
Xin Lu Liu
Keyword(s):  
Carbon Steel ◽  
Synergistic Effect ◽  
Sulphuric Acid ◽  
Corrosion Inhibition ◽  
Potentiodynamic Polarization ◽  
High Efficiency ◽  
Electrochemical Impedance ◽  
Effective Means ◽  
Vitamin B1 ◽  
Inhibition Mechanism

In recent years more attention is paid to high-efficiency and nontoxic corrosion inhibitor. Synergistic inhibition is an effective means to improve the inhibitive force of inhibitor. The aim of this work is to attempt to find out inhibition mechanism and synergistic effect of Lysozyme (LYZ) and vitamin B1 (VB1) and to diversify the application of inhibitor in acidic medium. The corrosion inhibition effect of LYZ and VB1 for carbon steel specimens in 0.5 mol•L-1 sulphuric acid solution have been investigated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) methods. The obtained results show that carbon steel is more efficiently protected by the mixture of lysozyme and vitamin B1 (LYZ-VB1) than LYZ or VB1. By potentiodynamic polarization method, the highest inhibition efficiencies of 89.5% and 80.04% are observed with single LYZ or VB1, respectively, and an improved inhibition efficiency of 94.2% is obtained with LYZ-VB1 at 25°C.

Influence of phytic acid on the corrosion behavior of carbon steel with different surface treatments

2018 ◽  
Vol 65 (6) ◽  
pp. 658-667 ◽  
Author(s):  
Yingjun Zhang ◽  
Baojie Dou ◽  
Yawei Shao ◽  
Xue-Jun Cui ◽  
Yanqiu Wang ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibitor ◽  
Corrosion Inhibition ◽  
Corrosion Behavior ◽  
Electrochemical Impedance ◽  
Surface Condition ◽  
Energy Dispersive Spectrometer ◽  
Surface Treatments ◽  
Inhibition Mechanism ◽  
Content Type

Purpose This paper aim to investigate the influence of PA on the corrosion behavior of carbon steel with blast cleaned or pre-rusted treatments, and interpret the inhibition mechanism of PA on the steel with different surface treatments. Design/methodology/approach The influence of PA on the corrosion behavior of blast cleaned or rusty steel was investigated by means of electrochemical impedance spectroscopy (EIS). The EIS data were analyzed using the @ZsimpWin commercial software. The morphology and component of steel after immersion were characterized by scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), Fourier transformation infrared (FTIR) and X-ray diffractometer (XRD). Findings EIS analysis results indicated that PA had good corrosion inhibition for blast cleaned or rusty steel. SEM, EDS, FTIR and XRD further indicated that PA had two main corrosion inhibition processes for the corrosion inhibition of blast cleaned or rusty steel: corrosion dissolution and formation of protective barrier layers. Originality/value Most published works focus the attention only toward the effect of corrosion inhibitor for the clean metal surfaces. However, the surface condition of metal sometimes is unsatisfactory in the practical application of corrosion inhibitor, such as existing residual rust. Some studies also have shown that several corrosion inhibitors could be applied on partially rusted substrates. These inhibitors mainly include tannins and phosphoric acid, but not PA. Therefore, the authors investigated the influence of PA on the corrosion behavior of carbon steel with blast cleaned or pre-rusted treatments in this paper.

scholarly journals Experimental and Theoretical Study on the Synergistic Inhibition Effect of Pyridine Derivatives and Sulfur-Containing Compounds on the Corrosion of Carbon Steel in CO2-Saturated 3.5 wt.% NaCl Solution

Molecules ◽  
2018 ◽  
Vol 23 (12) ◽  
pp. 3270 ◽  
Author(s):  
Junlei Tang ◽  
Yuxin Hu ◽  
Zhongzhi Han ◽  
Hu Wang ◽  
Yuanqiang Zhu ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibition ◽  
Electrochemical Impedance ◽  
Inhibition Mechanism ◽  
Pyridine Derivative ◽  
Pyridine Derivatives ◽  
Nacl Solution ◽  
Molar Ratios ◽  
Sulfur Containing ◽  
Sulfur Containing Compounds

The corrosion inhibition performance of pyridine derivatives (4-methylpyridine and its quaternary ammonium salts) and sulfur-containing compounds (thiourea and mercaptoethanol) with different molar ratios on carbon steel in CO2-saturated 3.5 wt.% NaCl solution was investigated by weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy, and scanning electron microscopy. The synergistic corrosion inhibition mechanism of mixed inhibitors was elucidated by the theoretical calculation and simulation. The molecules of pyridine derivative compounds with a larger volume has priority to adsorb on the metal surface, while the molecules of sulfur-containing compounds with a smaller volume fill in vacancies. A dense adsorption film would be formed when 4-PQ and sulfur-containing compounds are added at a proper mole ratio.

scholarly journals Experimental and theoretical study on the synergistic inhibition effect of yridine derivatives and sulfur-containing compounds on the corrosion of carbon steel in CO2-saturated 3.5 wt.% NaCl solution

2018 ◽  
Author(s):  
Junlei Tang ◽  
Yuxin Hu ◽  
Zhongzhi Han ◽  
Hu Wang ◽  
Yuanqiang Zhu ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibition ◽  
Electrochemical Impedance ◽  
Inhibition Mechanism ◽  
Pyridine Derivatives ◽  
Nacl Solution ◽  
Molar Ratios ◽  
Inhibition Performance ◽  
Sulfur Containing ◽  
Sulfur Containing Compounds

The corrosion inhibition performance of pyridine derivatives (4-methylpyridine and its quaternary ammonium salts) and sulfur-containing compounds (thiourea and mercaptoethanol) with different molar ratios on carbon steel in CO2-saturated 3.5 wt.% NaCl solution was investigated by weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy and scanning electron microscopy. The synergistic corrosion inhibition mechanism of mixed inhibitors was elucidated by the theoretical calculation and simulation. The molecule of pyridine derivatives compound with larger volume has the priority to adsorb on the metal surface, while the molecules of sulfur-containing compounds with smaller volume fill in vacancies. A dense adsorption film would be formed when 4-PQ and sulfur-containing compounds are added at a proper mole ratio.

THE INHIBITORY EFFECT OF SOME BIPYRIDINE DERIVATIVES ON THE CORROSION BEHAVIOR OFN80 CARBON STEEL IN SULPHURIC ACID SOLUTIONS

2015 ◽  
Vol 22 (01) ◽  
pp. 1550007 ◽  
Author(s):  
XIA LIU ◽  
PETER C. OKAFOR ◽  
BIN JIANG ◽  
HONGXIANG HU ◽  
YUGUI ZHENG
Keyword(s):  
Carbon Steel ◽  
Sulphuric Acid ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Inhibitory Effect ◽  
Inhibition Mechanism ◽  
Acid Solutions ◽  
Chemical Parameters ◽  
Steel Electrode ◽  
C 30

The corrosion inhibition characteristics of 2,2′-bipyridine (BIPY) and 2,2′-bipyridine-3,3′-dicarboxylic acid (BIDA), on carbon steel in sulphuric acid solutions was studied using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques at 20°C, 30°C and 40°C. The results indicate that the organic compounds inhibit the corrosion of mild steel in H2SO4solutions and the extent of inhibition increases with inhibitor concentration and decreases with temperature. A mixed-inhibition mechanism is proposed for the inhibitive effects of the compounds. The order of inhibition efficiency obtained was BIDA>BIPY. There is a good correlation between the quantum chemical parameters and experimentally determined inhibition efficiency of the inhibitors. The adsorption characteristics of the inhibitor were approximated by Temkin isotherm. Morphological study of the carbon steel electrode surface was undertaken by scanning electron microscope (SEM) and the interfacial species formed on the surface in the presence of inhibitors analyzed by Infrared spectroscopy.

The synergistic effect of 2-mercaptobenzotiazole and zinc nitrate as corrosion inhibitor on carbon steel in saline solution

2020 ◽  
Vol 111 (10) ◽  
pp. 863-871
Author(s):  
Hamze Foratirad ◽  
Majid Golabadi ◽  
Masoud Asgari ◽  
Mohammad Ghasem Gholami ◽  
Meysam Karimi
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibition ◽  
Electrochemical Impedance ◽  
Synergistic Effects ◽  
Steel Substrate ◽  
Electrochemical Techniques ◽  
Corrosion Current ◽  
Zinc Nitrate ◽  
Inhibition Mechanism ◽  
Anodic Current Density

Abstract In this study, the synergistic effects of 2-mercaptobenzotiazole molecules and zinc nitrate on the corrosion behavior of carbon steel were investigated using electrochemical techniques in 3.5% NaCl solution. The experimental results revealed that combination of 2-mercaptobenzoimidazole (MBT) and zinc nitrate with ratio of 100 ppm : 100 ppm, resulted in the least corrosion current (1.03 lA cm-2) and the highest corrosion inhibition efficiency. Polarization results showed that the inhibition mechanism of inhibitor was mixed-type (anodic and cathodic mechanism) corrosion inhibition which was predominantly influenced by a reduction in dissolution rate of the substrate (decrease in anodic current density). Electrochemical impedance spectroscopy analysis yielded more accurate results about the formation mechanism and stability of the inhibitor film over prolonged time. The precipitation of chelate from inhibitor molecules and zinc cations on steel surface was found to be the main mechanism for increasing the corrosion resistance of steel substrate.

Influence of Nonoxynol-9 on the Corrosion Inhibition of Carbon Steel in 1.0 M Hydrochloric Acid Solution

2016 ◽  
Vol 230 (11) ◽  
Author(s):  
Sayed S. Abd El-Rehim ◽  
Mohamed Abdel Moneim Deyab ◽  
Hamdy H. Hassan ◽  
Ahamed Abdel Aziz Ibrahim
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibition ◽  
Metal Surface ◽  
Electrochemical Impedance ◽  
Inhibition Mechanism ◽  
Physical Interaction ◽  
Chemical Calculation ◽  
Surface Polarization ◽  
Different Temperatures ◽  
Capacitive Loop

AbstractThe inhibitory performance of nonoxynol-9 (N9) as a corrosion inhibitor for carbon steel was evaluated in 1.0 M HCl solution at different temperatures. Potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and quantum chemical calculation methods were used in this study. The results indicated that the corrosion rate decreased with increasing concentration of N9 up 150 ppm and decreased with the increase in temperature of the medium. The comparison between the results obtained by polarization and EIS methods showed a good agreement. The corrosion inhibition effect of N9 could be related to the adsorption of N9 molecules on the metal surface. Polarization curves indicated that N9 behaves as a mixed type inhibitor. EIS exhibited one capacitive loop which indicates that the corrosion reaction is controlled by charge transfer process. The inhibition mechanism of N9 involves physical interaction between the inhibitor and metal surface. The adsorption of N9 on carbon steel affords physisorption process and obeyed the Langmuir adsorption isotherm.

scholarly journals Synergistic Effect of KI on Corrosion Inhibition of Mild Steel by Polynuclear Schiff Base in Sulphuric Acid

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
K. S. Shaju ◽  
K. Joby Thomas ◽  
Vinod P. Raphael ◽  
Aby Paul
Keyword(s):  
Schiff Base ◽  
Synergistic Effect ◽  
Mild Steel ◽  
Sulphuric Acid ◽  
Corrosion Inhibition ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Sulphuric Acid Solution ◽  
Increase With Increase ◽  
Polarization Studies

Synergistic effect of KI on the corrosion inhibition efficiency of polynuclear Schiff base, anthracene-9(10H)-one-3-aminopropanoic acid (A9O3AP), on mild steel (MS) in 0.5 M sulphuric acid solution has been investigated using weight loss measurements, electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization studies. The results show that inhibition efficiencies on MS increase with increase in concentration of the inhibitor and enhancement in inhibition efficiency was observed on addition of potassium iodide due to synergism. The adsorptions, of inhibitor and inhibitor + KI on the surfaces of the corroding metal obey Freundlich and Langmuir isotherms, respectively. Polarization studies revealed that A9O3AP acts as a mixed type inhibitor. Thermodynamic parameters (; ) were calculated using the adsorption isotherms. A probable synergismtic mechanism is proposed.

scholarly journals Combined Experimental and Theoretical Insights into the Corrosion Inhibition Activity on Carbon Steel Iron of Phosphonic Acids

Molecules ◽  
2020 ◽  
Vol 26 (1) ◽  
pp. 135
Author(s):  
Aurelia Visa ◽  
Nicoleta Plesu ◽  
Bianca Maranescu ◽  
Gheorghe Ilia ◽  
Ana Borota ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibition ◽  
Density Functional ◽  
Energy Gap ◽  
Electrochemical Impedance ◽  
Charge Transfer Resistance ◽  
Phosphonic Acids ◽  
Transfer Resistance ◽  
Potential Map ◽  
Chlorine Ions

The inhibition effect of N,N′-phosphonomethylglycine (PMG) and vinyl phosphonic acid (VPA) on the 3% NaCl acidic solution corrosion of carbon steel iron was studied at different immersion times by potentiodynamic polarization, electrochemical impedance spectroscopy, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, and computational methods. It is found from the polarization studies that PMG and VPA behave as mixed-type inhibitors in NaCl. Values of charge transfer resistance (Rct) and double layer capacitance (Cdl) in the absence and presence of inhibitors are determined. The PMG and VPA inhibitors were capable of inhibiting the corrosion process up to ≈91% and ≈85%, respectively. In the presence of PMG, the synergic effect of chlorine ions was observed. Density functional theory (DFT) was engaged to establish the adsorption site of PMG, VPA, and their deprotonated states. For studied compounds, the resulted values of ELUMO, EHOMO, energy gap (∆E), dipole moment (μ), electronic hardness (η), global softness (σ), electrophilic index (ω), and the electronic potential map are in concordance with the experimental data results regarding their corrosion inhibition behavior and adsorption on the metal surface.

Corrosion Inhibition of N,N- diethylammonium O,O′- di (p-chlorophenyl) dithiophosphate for Carbon Steel in HCL Solution

2013 ◽  
Vol 781-784 ◽  
pp. 299-303
Author(s):  
Shu Lan Cai ◽  
Kang Quan Qiao ◽  
Fa Mei Feng
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Carbon Steel ◽  
Corrosion Inhibition ◽  
Mixed Type ◽  
Electrochemical Impedance ◽  
Equivalent Circuit Model ◽  
Inhibition Effect ◽  
Inhibition Process ◽  
Hcl Solution ◽  
Mixed Type Inhibitor

A new corrosion inhibior N,N-diethylammonium O,O-di (p-chlorophenyl) dithiophosphate (EDPDP) has been synthesized and its inhibition effect towards the corrosion of carbon steel in 1.0 molL-1 HCl solution at 25 °C has been investigated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) methods. The obtained results show that EDPDP is a excellent inhibitor and the inhibition efficiencies exceed 90 %. The polarization measurements reveal that EDPDP is a mixed type inhibitor and the equivalent circuit model of the corrosion inhibition process is obtained by the analysis of EIS data.

Investigation of corrosion inhibition of C38 steel in 5.5 M H3PO4 solution using Ziziphus lotus oil extract: an application model

2019 ◽  
Vol 66 (1) ◽  
pp. 121-126 ◽  
Author(s):  
Walid Belmaghraoui ◽  
Aimad Mazkour ◽  
Hicham Harhar ◽  
Mourad Harir ◽  
Souad El Hajjaji
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibition ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Electric Circuit ◽  
Oil Composition ◽  
Content Type ◽  
Tafel Polarization ◽  
Chemical Content ◽  
Oil Extract

Purpose This study aims to investigate the corrosion inhibition effect of extracted oil from Ziziphus lotus fruit on corrosion of C38 carbon steel in 5.5 M H3PO4 solution using potentiodynamic polarization and impedance techniques. Design/methodology/approach Oil composition was determined using gas chromatography, and the results showed that oleic and palmitic acids present approximately 84.0 per cent of its total chemical content. Electrochemical impedance spectroscopy (EIS) data were analyzed by adapting it to a well-developed electric circuit model. The inhibition efficiency of Z. lotus oil was calculated and compared using Tafel polarization and EIS. Findings Accordingly, the oil extract was found to act as an anodic type inhibitor. Furthermore, inhibition efficiency of Z. lotus oil extract increase with oil concentrations and achieve approximately 70.5 per cent at 3 g/L solution of Z. lotus oil. Originality/value The results obtained from different tested methods were in line, and the oil was able to reduce significantly the kinetics of the corrosion process of C38 carbon steel.

Sign in / Sign up

Export Citation Format

Share Document