Innovation on Quality Control: Case from Chinese Biggest E-Commerce Platform Operator

2012 ◽  
Vol 472-475 ◽  
pp. 3067-3070
Author(s):  
Hua Yao Zhang
Keyword(s):  
Quality Control ◽  
Cost Effective ◽  
Third Party ◽  
Control Case ◽  
Evaluation Design ◽  
High Quality ◽  
Analysis Problem ◽  
Specific Approach ◽  
Interaction Mode ◽  
And Control

This paper introduces the innovation on quality control from a single Tmall mode to online and offline interaction mode taken by the biggest Chinese e-commerce platform operator of Alibaba. During analysis, problem Alibaba has ever faced is followed by specific approach it applied, and then by a discussion of relative issues. What a reader can learn from this research is that the innovation is designed for the purpose of providing cost-effective, high-quality goods with perfect services. Consumer-oriented evaluation design and joint certification and control with suppliers and third-party agencies are severing for these purposes.

scholarly journals Analisis Pelaksanaan Quality Control untuk Mengurangi Defect Produk di Perusahaan Pengolahan Daging Sapi Wagyu dengan Pendekatan Six Sigma

2021 ◽  
Vol 20 (1) ◽  
pp. 56-78
Author(s):  
Adi Nugroho ◽  
◽  
Lien Herliani Kusumah
Keyword(s):  
Quality Control ◽  
Six Sigma ◽  
Preventive Maintenance ◽  
Product Knowledge ◽  
High Quality ◽  
Sigma Level ◽  
Conducting Research ◽  
And Control ◽  
Six Sigma Approach ◽  
Keywords Quality Control

Abstract. The industrial competition requires companies to produce high-quality products, but the phenomenon is that companies still produce products that do not meet specifications and are returned by customers. This is the basis for conducting research aimed at analyzing the implementation of quality control, knowing the main defects of the product, and making improvements to reduce or eliminate problems during the production process using the Six Sigma approach with steps: Define, Measure, Analyze, Improve and Control. The research sample is the result of the final product inspection in April - September 2019. The results of the study indicate that the implementation of Quality control has been carried out but not maximally, with the root causes of the main defects being method, material, and machine. CTO in this research are: foreign body contamination, leak packaging, product temperature exceeds the standard, over drip, and thick fat. After improving, there was an increase in sigma level from 3.48 (performance baseline) to 3.83. Control is carried out to maintain consistency of corrective actions by regular briefings to operators, increasing GMP training, 5S, and product knowledge, standardizing SOP changes, adding necessary tools, and controlling preventive maintenance implementation. Keywords: Quality control, six sigma, wagyu, defect product, DMAIC

scholarly journals P054: The effectiveness of emergency department-based interventions for patients with advanced or end-stage illness: a systematic review

CJEM ◽  
2019 ◽  
Vol 21 (S1) ◽  
pp. S82
Author(s):  
A. Ghalab ◽  
M. Kruhlak ◽  
S. Kirkland ◽  
H. Ruske ◽  
S. Campbell ◽  
...  
Keyword(s):  
Systematic Review ◽  
Data Extraction ◽  
Meta Analysis ◽  
Quality Care ◽  
Grey Literature ◽  
Cost Effective ◽  
Third Party ◽  
High Quality ◽  
End Stage ◽  
The Impact

Introduction: Patients with advanced or end-stage illness frequently present to emergency departments (EDs), many of whom are in need of palliative care (PC). Emergency physicians have struggled in providing high quality care to these patients and there is a need to identify cost-effective PC interventions delivered in the ED to improve patient outcomes. The objective of this systematic review was to examine the effectiveness of ED-based PC interventions. Methods: A comprehensive search of nine electronic databases and grey literature sources was conducted to identify any comparative studies assessing the effectiveness of ED-based PC interventions to improve health outcomes of patients with advanced or end-stage illness. Two independent reviewers completed study selection, quality assessment, and data extraction. Differences were mediated via third-party adjudication. Relative risks (RR) with 95% confidence intervals (CIs) were calculated using a random effects model and heterogeneity (I2) was reported. Results: From 5882 potentially eligible citations, 12 studies were included. Two studies are currently on-going clinical trials, and as such, 10 studies were included in this analysis. The studies consisted of before-after studies (n = 5), RCTs (n = 4), and an observational cohort (n = 1). Interventions assessed among the included studies consisted primarily of ED-directed PC consultations (n = 6), while other studies assessed screening of patients with advanced or end-stage illness and PC needs (n = 2), education on PC for ED-staff (n = 1), and an ED-based critical care unit (n = 1). Infrequent reporting of important outcomes (e.g., Mortality, ED relapse) limited the ability of this review to conduct meaningful meta-analysis. There was no difference in patient mortality between two studies assessing ED-directed PC consultations (RR = 0.89; 95% CI: 0.71, 1.13; I2 = 0%). One before-after study (RR = 0.73; 95% CI: 0.47, 1.13) and two RCTs (RR = 2.19; 95% CI: 0.40, 11.92; I2 = 96%) did not identify significant differences in PC consultations intervention (implementation of ED-directed PC consultations) and control (usual care) patients. Conclusion: This review found limited evidence to support the recommendation of any particular ED-based intervention for patients presenting to the ED with advanced or end-stage illness. High quality studies and standardized outcome reporting are needed to better understand the impact of PC interventions in the ED setting.

scholarly journals Mouse resources at the RIKEN BioResource Research Center and the National BioResource Project core facility in Japan

2021 ◽  
Author(s):  
Saori Mizuno-Iijima ◽  
Toshiaki Nakashiba ◽  
Shinya Ayabe ◽  
Hatsumi Nakata ◽  
Fumio Ike ◽  
...  
Keyword(s):  
Quality Control ◽  
Science Studies ◽  
Cost Effective ◽  
Added Value ◽  
Research Center ◽  
High Quality ◽  
Control Programs ◽  
International Mouse Phenotyping Consortium ◽  
The Government ◽  
Resource Networks

AbstractThe RIKEN BioResource Research Center (BRC) was established in 2001 as a comprehensive biological resource center in Japan. The Experimental Animal Division, one of the BRC infrastructure divisions, has been designated as the core facility for mouse resources within the National BioResource Project (NBRP) by the Japanese government since FY2002. Our activities regarding the collection, preservation, quality control, and distribution of mouse resources have been supported by the research community, including evaluations and guidance on advancing social and research needs, as well as the operations and future direction of the BRC. Expenditure for collection, preservation, and quality-control operations of the BRC, as a national core facility, has been funded by the government, while distribution has been separately funded by users’ reimbursement fees. We have collected over 9000 strains created mainly by Japanese scientists including Nobel laureates and researchers in cutting-edge fields and distributed mice to 7000 scientists with 1500 organizations in Japan and globally. Our users have published 1000 outstanding papers and a few dozen patents. The collected mouse resources are accessible via the RIKEN BRC website, with a revised version of the searchable online catalog. In addition, to enhance the visibility of useful strains, we have launched web corners designated as the “Mouse of the Month” and “Today’s Tool and Model.” Only high-demand strains are maintained in live colonies, while other strains are cryopreserved as embryos or sperm to achieve cost-effective management. Since 2007, the RIKEN BRC has built up a back-up facility in the RIKEN Harima branch to protect the deposited strains from disasters. Our mice have been distributed with high quality through the application of strict microbial and genetic quality control programs that cover a globally accepted pathogens list and mutated alleles generated by various methods. Added value features, such as information about users’ publications, standardized phenotyping data, and genome sequences of the collected strains, are important to facilitate the use of our resources. We have added and disseminated such information in collaboration with the NBRP Information Center and the NBRP Genome Information Upgrading Program. The RIKEN BRC has participated in international mouse resource networks such as the International Mouse Strain Resource, International Mouse Phenotyping Consortium, and Asian Mouse Mutagenesis and Resource Association to facilitate the worldwide use of high-quality mouse resources, and as a consequence it contributes to reproducible life science studies and innovation around the globe.

Predicting effects of quality-control practices on the cost-effective operation of a stable, multitest analytical system

1990 ◽  
Vol 36 (10) ◽  
pp. 1760-1764 ◽  
Author(s):  
J O Westgard ◽  
J J Oryall ◽  
D D Koch
Keyword(s):  
Quality Control ◽  
Error Detection ◽  
Predictive Models ◽  
Cost Effective ◽  
Batch Size ◽  
High Quality ◽  
Low Frequencies ◽  
Effective Operation ◽  
Analytical System ◽  
The Cost

Abstract The cost-effective operation of an analytical system depends on quality-control (QC) practices such as the QC procedure itself (control rules, number of control measurements); the batch size or the run length; and the use of bracketed, nonbracketed, or pre-control modes of operation. Predictive value models that predict the defect rate and test yield of each test, as well as of the system as a whole, have been used to study these practices and to develop strategies for improving the quality and productivity of a multitest analyzer. Quality was optimized for most tests by achieving high error detection and low false rejection by the QC procedures. For a few tests where ideal QC performance could not be achieved, predictive models indicate that high quality is achieved, predictive models indicate that high quality is achieved as long as the observed stabilities (low frequencies of errors) of the measurement procedures are maintained. In our laboratories, productivity gains of 2.9% ($17,400/year) were achieved by changing QC procedures. Predictive models indicate that further gains are possible by increasing batch size and changing from bracketed to nonbracketed control operation. In general, the common practice of bracketed control on stable analytical systems may need to be re-examined owing to its effect on the cost of operation.

Situational Strategic Awareness Monitoring Surveillance System–Microcomputer and Microcomputer Clustering used for Intelligent, Economical, Scalable, and Deployable Approach for Safeguarding Materials

2020 ◽  
Vol 2020 (3) ◽  
pp. 60408-1-60408-10
Author(s):  
Kenly Maldonado ◽  
Steve Simske
Keyword(s):  
Surveillance System ◽  
Cost Effective ◽  
Government Agencies ◽  
Electronic Systems ◽  
Time Data ◽  
Potential Threat ◽  
Intelligent Surveillance ◽  
World Markets ◽  
Programming Software ◽  
And Control

The principal objective of this research is to create a system that is quickly deployable, scalable, adaptable, and intelligent and provides cost-effective surveillance, both locally and globally. The intelligent surveillance system should be capable of rapid implementation to track (monitor) sensitive materials, i.e., radioactive or weapons stockpiles and person(s) within rooms, buildings, and/or areas in order to predict potential incidents proactively (versus reactively) through intelligence, locally and globally. The system will incorporate a combination of electronic systems that include commercial and modifiable off-the-shelf microcomputers to create a microcomputer cluster which acts as a mini supercomputer which leverages real-time data feed if a potential threat is present. Through programming, software, and intelligence (artificial intelligence, machine learning, and neural networks), the system should be capable of monitoring, tracking, and warning (communicating) the system observer operations (command and control) within a few minutes when sensitive materials are at potential risk for loss. The potential customer is government agencies looking to control sensitive materials and/or items in developing world markets intelligently, economically, and quickly.

Perencanaan Pengendalian Kualitas Produk Pakaian Bayi dengan Metode Six Sigma Pada CV. AGP

JEMAP ◽  
2020 ◽  
Vol 3 (1) ◽  
Author(s):  
Albertus Reynaldo Kurniawan ◽  
Bayu Prestianto
Keyword(s):  
Quality Control ◽  
Continuous Improvement ◽  
Six Sigma ◽  
Screen Printing ◽  
Control Method ◽  
Operational Performance ◽  
Machine Maintenance ◽  
Quality Product ◽  
Break Time ◽  
And Control

Quality control becomes an important key for companies in suppressing the number of defective produced products. Six Sigma is a quality control method that aims to minimize defective products to the lowest point or achieve operational performance with a sigma value of 6 with only yielding 3.4 defective products of 1 million product. Stages of Six Sigma method starts from the DMAIC (Define, Measure, Analyze, Improve and Control) stages that help the company in improving quality and continuous improvement. Based on the results of research on baby clothes products, data in March 2018 the percentage of defective products produced reached 1.4% exceeding 1% tolerance limit, with a Sigma value of 4.14 meaning a possible defect product of 4033.39 opportunities per million products. In the pareto diagram there were 5 types of CTQ (Critical to Quality) such as oblique obras, blobor screen printing, there is a fabric / head cloth code on the final product, hollow fabric / thin fabric fiber, and dirty cloth. The factors caused quality problems such as Manpower, Materials, Environtment, and Machine. Suggestion for consideration of company improvement was continuous improvement on every existing quality problem like in Manpower factor namely improving comprehension, awareness of employees in producing quality product and improve employee's accuracy, Strength Quality Control and give break time. Materials by making the method of cutting the fabric head, the Machine by scheduling machine maintenance and the provision of needle containers at each employees desk sewing and better environtment by installing exhaust fan and renovating the production room.

Role of Rasayana in Prevention of COVID-19 - A Review

2020 ◽  
Vol 11 (SPL1) ◽  
pp. 716-722
Author(s):  
Sneha Dhakite ◽  
Sadhana Misar Wajpeyi
Keyword(s):  
Immune System ◽  
Respiratory System ◽  
Viral Infections ◽  
Cost Effective ◽  
The Body ◽  
Healthy Life ◽  
Vital Functions ◽  
Healthy Life Style ◽  
And Control

The “Coronavirus disease 19 (COVID-19)” is caused by “Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2)”, a newly discovered member of the Coronaviridae family of viruses which is a highly communicable. There is no effective medical treatment till date for Coronavirus disease hence prevention is the best way to keep disease away. Rasayana proved to be highly efficacious and cost effective for the Prevention and Control of viral infections when vaccines and standard therapies are lacking. Rasayana Chikitsa is one of the eight branches of Ashtanga Ayurveda which helps to maintain healthy life style. Rasayana improves immunity and performs many vital functions of human body. Vyadhikshamatva that is immune mechanism of the body is involved in Prevention of the occurrence of a new disease and it also decreases the virulence and progression of an existing disease. In COVID-19 the Respiratory system mainly get affected which is evident from its symptoms like cold, cough and breathlessness. Here the drugs help in enhancing immune system and strengthening functions of Respiratory system can be useful. For this purpose, the Rasayana like Chyavanprasha, Agastya Haritaki, Pippali Rasayana, Guduchi, Yashtimadhu, Haridra, Ashwagandha, Tulsi are used. Rasayana working on Respiratory system are best for Prevention of Coronavirus and boosting immune system. Rasayana Chikitsa can be effective in the Prevention as well as reducing symptoms of COVID-19.

The Formability and Elongation of Aluminum Alloys AA5083 and AA3003 for Micro-Truss Sandwiches Manufacturing

2020 ◽  
Vol 38 (9A) ◽  
pp. 1396-1405
Author(s):  
Arwa F. Tawfeeq ◽  
Matthew R. Barnett
Keyword(s):  
Aluminum Alloy ◽  
Strain Rate ◽  
Cost Effective ◽  
Tensile Tests ◽  
Truss Structures ◽  
High Quality ◽  
Trade Off ◽  
Clad Layer ◽  
Higher Temperature ◽  
Different Shapes

The development in the manufacturing of micro-truss structures has demonstrated the effectiveness of brazing for assembling these sandwiches, which opens new opportunities for cost-effective and high-quality truss manufacturing. An evolving idea in micro-truss manufacturing is the possibility of forming these structures in different shapes with the aid of elevated temperature. This work investigates the formability and elongation of aluminum alloy sheets typically used for micro-truss manufacturing, namely AA5083 and AA3003. Tensile tests were performed at a temperature in the range of 25-500 ○C and strain rate in the range of 2x10-4 -10-2 s-1. The results showed that the clad layer in AA3003 exhibited an insignificant effect on the formability and elongation of AA3003. The formability of the two alloys was improved significantly with values of m as high as 0.4 and 0.13 for AA5083 and AA3003 at 500 °C. While the elongation of both AA5083 and AA3003 was improved at a higher temperature, the elongation of AA5083 was inversely related to strain rate. It was concluded that the higher the temperature is the better the formability and elongation of the two alloys but at the expense of work hardening. This suggests a trade-off situation between formability and strength. 

Sign in / Sign up

Export Citation Format

Share Document