Effect of Different Post-Treatment on the Morphology, Structure and Property of Electrospun SF Nanofiber Mats

2012 ◽  
Vol 557-559 ◽  
pp. 607-610
Author(s):  
Tao Liu ◽  
Feng Zhang ◽  
Bao Qi Zuo

In this paper, we employed Methanol, 75% Ethanol, 100%Ethanol, and Isopropanol to treat electrospun SF nanofiber mats, and studied the morphology, structure and property of SF nanofiber before and after treatment by means of SEM, and FTIR. While the as-spun SF nanofiber mats consisted of α-helix and random coil, post-treatment of the SF nanofiber resulted in significant increase in β-sheet component and improvement of water resistance of the SF nanofiber mats. This effect was not obvious affected when different post-treatment system was used, but methanol and 75% was more effective in inducing conformation transition from α-helix and random coil to β-sheet.

2011 ◽  
Vol 236-238 ◽  
pp. 2221-2224
Author(s):  
Kui Hua Zhang ◽  
Xiu Mei Mo

In order to improve water-resistant ability silk fibroin (SF) and SF/P(LLA-CL) blended nanofibrous scaffolds for tissue engineering applications, methanol vapor were used to treat electrospun nanofibers. SEM indicated SF and SF/ P(LLA-CL) scaffolds maintained nanofibrous structure after treated with methanol vapor and possessed good water-resistant ability. Characterization of 13C NMR clarified methanol vapor induced SF conformation from random coil or α- helix to β-sheet. Moreover, treated SF/ P (LLA-CL) nanofibrous scaffolds still kept good mechanical properties. Methanol vapor could be ideal method to treat SF and SF/ P(LLA-CL) nanofibrous scaffolds for biomedical applications.


2011 ◽  
Vol 175-176 ◽  
pp. 176-180
Author(s):  
Hui Ying Wu ◽  
Bao Qi Zuo

Silk fibroin modified viscose fiber (SFVF) was a new fiber with silken handling and luster, which was produced via adding silk fibroin (SF) during the viscose process. In this paper, a series of testing had been done to study the structure and properties of SFVF. The amino acid content of SFVF was measured by HITACHI-835-50 amino acid tester. The morphology, structure, thermal and mechanical property of SFVF were characterized by SEM, FTIR, DSC and electronic strength tester. The results indicated that SFVF consisted of many kinds of amino acids compared with pure viscose fiber (VF) yarn. The results of SEM showed more continuous multi fine slots existed in the longitudinal section of SFVF than in that of VF, demonstrating that wet permeability and vapor transmission could be enhanced for the SFVF to certain extent. Results from FTIR indicated that the secondary structure of SFVF was mainly β-sheet and random coil, and its absorption peaks were 1616cm-1 and 1644 cm-1 respectively. The DSC curve shown the thermal decomposition temperature of SFVF was about 328.39°C, which was close to that of VF. It suggested that the SF modification had no obvious influence on thermal stability of VF. At last, the dry-strength and wet-strength of SFVF was close to that of VF. Therefore, the application of VF would be expanded with the SF modification.


Molecules ◽  
2019 ◽  
Vol 24 (16) ◽  
pp. 2940 ◽  
Author(s):  
Yilong Teng ◽  
Juan Zhao ◽  
Lulu Ding ◽  
Yu Ding ◽  
Ping Zhou

Accumulation of α-synuclein (α-Syn) is a remarkable pathology for Parkinson’s disease (PD), therefore clearing it is possibly a promising strategy for treating PD. Aberrant copper (Cu(II)) homeostasis and oxidative stress play critical roles in the abnormal aggregation of α-Syn in the progress of PD. It is reported that the polyphenol (−)-epi-gallocatechin gallate (EGCG) can inhibit α-Syn fibrillation and aggregation, disaggregate α-Syn mature fibrils, as well as protect α-Syn overexpressed-PC12 cells against damage. Also, previous studies have reported that EGCG can chelate many divalent metal ions. What we investigate here is whether EGCG can interfere with the Cu(II) induced fibrillation of α-Syn and protect the cell viability. In this work, on a molecular and cellulaire basis, we demonstrated that EGCG can form a Cu(II)/EGCG complex, leading to the inhibition of Cu(II)-induced conformation transition of α-Syn from random coil to β-sheet, which is a dominant structure in α-Syn fibrils and aggregates. Moreover, we found that the mixture of Cu(II) and EGCG in a molar ratio from 0.5 to 2 can efficiently inhibit this process. Furthermore, we demonstrated that in the α-Syn transduced-PC12 cells, EGCG can inhibit the overexpression and fibrillation of α-Syn in the cells, and reduce Cu(II)-induced reactive oxygen species (ROS), protecting the cells against Cu(II)-mediated toxicity.


2006 ◽  
Vol 17 (02) ◽  
pp. 235-246 ◽  
Author(s):  
GÖKHAN GÖKOĞLU ◽  
TARIK ÇELİK

In order to provide insights into the misfolding mechanism and the subsequent aggregate formation which cause what are known as the neurodegenerative polyglutamine diseases, we have simulated a 10-residue polyglutamine (poly-Q) chain in vacuum and in solvent by multicanonical method, which enabled us to study the system in a wide temperature range and discuss thermodynamic properties. It is understood that the system in vacuum shows two phase transitions, first of them occur at high temperature that is the well-known helix-coil transition and the second one is a solid-solid transition. However, the poly-Q chain in solvent is in a random coil state at higher temperatures, goes through a conformational change at T = 200 K and assumes predominantly a mixture of anti-parallel β-sheet and α-helix structures at low temperatures. One-residue glutamine dipeptide is also simulated and low-energy stable conformations are identified.


1982 ◽  
Vol 28 (7) ◽  
pp. 795-808
Author(s):  
K. B. Easterbrook ◽  
R. W. Coombs

The tubular appendage, spina (Easterbrook and Coombs. 1976. Can. J. Microbiol. 22: 438–440), dissociates most efficiently under conditions of low ionic strength (0.01 M), high pH (10), and high temperature (95 °C). The protomer, spinin, thus produced is stable under these conditions and reassociates on cooling to give two distinct filamentous polymeric structures that differ in their stability, protein conformation, and reassociation characteristics. Under conditions of low ionic strength (0.01 M), reassociation is relatively slow and leads to a product that has significant amounts of α-helix in addition to the high β-sheet component; under conditions of high ionic strength (1 M), reassociation is rapid and the non-β-sheet component is in the random coil configuration. Since polymerization of the latter structure is "seeded" by either endogenous or exogenously supplied spina fragments, the protomers comprising it are assumed to be in the same conformation as in the spinae. High ionic strength induces folding of the protomer, multimeric association, and finally, elongation by a temperature-dependent process. Reassociation appears to be pH (6–10) independent and, apart from a possible minor calcium effect, cation nonspecific.


2019 ◽  
Vol 20 (12) ◽  
pp. 3078 ◽  
Author(s):  
Sara Signorelli ◽  
Salvatore Cannistraro ◽  
Anna Rita Bizzarri

Raman spectroscopy, which is a suitable tool to elucidate the structural properties of intrinsically disordered proteins, was applied to investigate the changes in both the structure and the conformational heterogeneity of the DNA-binding domain (DBD) belonging to the intrinsically disordered protein p53 upon its binding to Azurin, an electron-transfer anticancer protein from Pseudomonas aeruginosa. The Raman spectra of the DBD and Azurin, isolated in solution or forming a complex, were analyzed by a combined analysis based on peak inspection, band convolution, and principal component analysis (PCA). In particular, our attention was focused on the Raman peaks of Tyrosine and Tryptophan residues, which are diagnostic markers of protein side chain environment, and on the Amide I band, of which the deconvolution allows us to extract information about α-helix, β-sheet, and random coil contents. The results show an increase of the secondary structure content of DBD concomitantly with a decrease of its conformational heterogeneity upon its binding to Azurin. These findings suggest an Azurin-induced conformational change of DBD structure with possible implications for p53 functionality.


Author(s):  
Yoshihiro Taniguchi ◽  
Naohiro Takeda

Infrared spectra of five globular proteins (bovine pancreas ribonuclease A, horse skeletal muscle myoglobin, bovine pancreas insulin, horse heart cytochrome c, egg white lysozyme) in 5% D2O solutions (pD 7.0) were measured as a function of pressure up to 1470 MPa at 30 °C. According to the second-derivative spectral changes in the observed amide I band of the proteins, which indicate that the α-helix and β-sheet substructures of the secondary structures break dramatically into the random coil conformation, ribonuclease A and myoglobin are denatured reversibly at 850 MPa and 350 MPa, respectively. Lysozyme denatures partially and reversibly at 670 MPa, as shown by decrease in the α-helix and β-turn substructures, but no change occurs in the random coil and β-sheet substructures. The secondary structure of cytochrome c is not disrupted at pressures up to 1470 MPa, and partial transformation of the α-helix of insulin to random coil starts at 960 MPa. Hydrogen-deuterium exchange of protons on the amide groups in the protein interior is increased by external pressure and is associated with the pressure-induced protein conformational changes. A number of studies on the effects of pressure on protein denaturation have been carried out using various high-pressure detection methods: ultraviolet absorbance spectroscopy (Brandts et al., 1970; Hawley, 1971), visible absorbance spectroscopy (Zipp & Kauzmann, 1973), fluorescence intensity spectroscopy (Li et al., 1976), polarization fluorescence spectroscopy (Chryssomallis et al., 1981), and enzyme activity assays (Taniguchi & Suzuki, 1983; Makimoto et al., 1989). These techniques have the great advantage of being applicable to pressure-induced reversible denaturation of proteins to identify the thermodynamic parameters, especially the volume change and compressibility of a protein in solution, because the experiments can be run under dilute conditions at a protein concentration of less than 0.05% w/v. Therefore, these data reflect the intramolecular phenomena of reversible pressure changes and provide the volume changes accompanying the denaturation of proteins, which are due to the difference in partial molal (specific) volume between the native and denatured proteins in solution.


1989 ◽  
Vol 43 (7) ◽  
pp. 1269-1272 ◽  
Author(s):  
Siding Zheng ◽  
Guanxian Li ◽  
Wenhuo Yao ◽  
Tongyin Yu

The mechanical denaturation process of silk fibroin is examined by Raman spectroscopy. The fresh silk fibroins from the middle gland of mature silkworms are drawn to various ratios on a tensile tester ( R = ldrawn/ linitial, where l is length) and their conformations are measured with Raman spectroscopy. Undrawn silk fibroin is mainly in the random coil structure with some α-helical conformation, the characteristic bands appearing at 1252 and 1660 (random coil) and at 942, 1106, and 1270 cm−1 (α-helix). When the samples are drawn up to R = 4 at an extension rate of 500 mm/min, two peaks at 1233 cm−1 (the amide III band) and 1085 cm−1 appear; it is shown that the β-sheet conformation is then formed. With an increase in drawing ratios, the intensities of these β-sheet bands increase and those of the random coil and α-helical bands decrease gradually. These changes indicate that, under the action of stress, the conformation of fibroin is altered from random coil and α-helix to β-sheet structures. This result is quite similar to the results achieved by the spinning of the silkworm. The effect of the water content in liquid silk on this conformational transition process is revealed and discussed.


Molecules ◽  
2019 ◽  
Vol 24 (21) ◽  
pp. 3945
Author(s):  
Moseti ◽  
Yoshioka ◽  
Kameda ◽  
Nakazawa

Silk fibroin (SF) produced by the domesticated wild silkworm, Samia cynthia ricini (S. c. ricini) is attracting increasing interest owing to its unique mechanical properties, biocompatibility, and abundance in nature. However, its utilization is limited, largely due to lack of appropriate processing strategies. Various strategies have been assessed to regenerate cocoon SF, as well as the use of aqueous liquid fibroin (LFaq) prepared by dissolution of silk dope obtained from the silk glands of mature silkworm larvae in water. However, films cast from these fibroin solutions in water or organic solvents are often water-soluble and require post-treatment to render them water-stable. Here, we present a strategy for fabrication of water-stable films from S. c. ricini silk gland fibroin (SGF) without post-treatment. Aqueous ethanol induced gelation of fibroin in the posterior silk glands (PSG), enabling its separation from the rest of the silk gland. When dissolved in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP), the SGF-gel gave a solution from which a transparent, flexible, and water-insoluble film (SGFHFIP) was cast. Detailed structural characterization of the SGFHFIP as-cast film was carried out and compared to a conventional, water-soluble film cast from LFaq. FTIR and 13C solid-state NMR analyses revealed both cast films to be α-helix-rich. However, gelation of SGF induced by the 40%-EtOH-treatment resulted in an imperfect β-sheet structure. As a result, the SGF-gel was soluble in HFIP, but some β-sheet structural memory remains, and the SGFHFIP as-cast film obtained has some β-sheet content which renders it water-resistant. These results reveal a structure water-solubility relationship in S. c. ricini SF films that may offer useful insights towards tunable fabrication of novel biomaterials. A plausible model of the mechanism that leads to the difference in water resistance of the two kinds of α-helix-rich films is proposed.


2014 ◽  
Vol 941-944 ◽  
pp. 989-993
Author(s):  
Yuan Zhou

This paper was concerned with the effects of ultrasonication on the gelation behavior of silk fibroins (SF), and a comparison of Domestic and Wild silkworms was studied. The results show that: with the increase of ultrasonic power, the gelation time of domestic (Bombyx Mori) SF solution decreased sharply. But wild silkworms (Antheraea yamamai and Antheraea pernyi) SF were different, When the power of utrasonication was lower than 400-500 W, the velocity of gelation were accelerated, and when the ultrasonic power was higher than 400-500W, the gelation time were delayed. Whatever domestic or wild silkworms, the mechanism of the effects of ultrasonication on the gelation behavior was that the ultrasonication promoted the structural transformation of SF molecules from random coil or α-helix to β-sheet.


Sign in / Sign up

Export Citation Format

Share Document