Effects of ZrO2 on Zinc Crystalline Glaze

2013 ◽  
Vol 716 ◽  
pp. 228-234 ◽  
Author(s):  
Chi Youn Lee ◽  
Hyun Soo Lee ◽  
Kyung Hyun Shin
Keyword(s):  
Firing Temperature ◽  
Crystal Formation ◽  
Firing Schedule ◽  
Zinc Crystal

Zinc Crystal Glaze has its limits in practical use of commercial glaze due to the sensitive firing schedule. In order to overcome these limits, and to improve the practical usage, this study is aimed to develop a stable zinc crystalline glaze. This study altered the quantity of nuclear formation of zinc crystal glaze in order to control the willemite (Zn2SiO4) formation in the glaze. The addition of ZrO2 to zinc crystal glaze influences the quantity of nuclear formation and its preservation; thus ZrO2 was used to control the optimal firing temperature and the size of the crystal formation in the glaze to find a zinc crystal glaze capable of withstanding various ranges of temperatures.

Study on Effect of Lattice Distortion on Infrared Properties of Ceramic Tiles at Ambient Temperature

2011 ◽  
Vol 243-249 ◽  
pp. 5794-5797
Author(s):  
Xing Yong Gu ◽  
Ting Luo ◽  
Yu Xia Chen
Keyword(s):  
Solid Solution ◽  
Ambient Temperature ◽  
Firing Temperature ◽  
Lattice Distortion ◽  
Raw Materials ◽  
The Body ◽  
Infrared Emissivity ◽  
Ceramic Tiles ◽  
Elemental Impurities ◽  
Firing Schedule

Effect of the lattice distortion of the main crystal mullite, addition of copper mine tailing and the firing schedule on the infrared properties were studied. The study revealed that the higher lattice distortion is, the higher infrared emissivity of ceramic tiles is. The addition of raw materials containing iron and other elemental impurities could form the solid solution in the body what promote the degree of lattice distortion of main crystal which affects the infrared emissivity of the ceramic tiles. With the increasing of firing temperature, the degree of lattice distortion of main crystals will decrease and the infrared properties also decrease.

The Critical Point Drying Method Applied to Scanning Electron Microscopy of L-929 Cells

1970 ◽  
Vol 28 ◽  
pp. 278-279
Author(s):  
Charles TurnbiLL ◽  
Delbert E. Philpott
Keyword(s):  
Electron Microscopy ◽  
Carbon Dioxide ◽  
Surface Tension ◽  
Critical Point ◽  
Freeze Drying ◽  
Attractive Alternative ◽  
Crystal Formation ◽  
Critical Point Drying ◽  
Time Required ◽  
Scanning Electron

The advent of the scanning electron microscope (SCEM) has renewed interest in preparing specimens by avoiding the forces of surface tension. The present method of freeze drying by Boyde and Barger (1969) and Small and Marszalek (1969) does prevent surface tension but ice crystal formation and time required for pumping out the specimen to dryness has discouraged us. We believe an attractive alternative to freeze drying is the critical point method originated by Anderson (1951; for electron microscopy. He avoided surface tension effects during drying by first exchanging the specimen water with alcohol, amy L acetate and then with carbon dioxide. He then selected a specific temperature (36.5°C) and pressure (72 Atm.) at which carbon dioxide would pass from the liquid to the gaseous phase without the effect of surface tension This combination of temperature and, pressure is known as the "critical point" of the Liquid.

Structure and migration of planar defects in crystals observed in atomic scale

1978 ◽  
Vol 36 (1) ◽  
pp. 284-285 ◽  
Author(s):  
H. Hashimoto ◽  
Y. Sugimoto ◽  
Y. Takai ◽  
H. Endoh
Keyword(s):  
Electron Microscope ◽  
Rotation Angle ◽  
Crystal Surface ◽  
Electron Gun ◽  
Atomic Scale ◽  
Present Observation ◽  
Twist Boundary ◽  
Optical Magnification ◽  
Zinc Crystal ◽  
And Migration

As was demonstrated by the present authors that atomic structure of simple crystal can be photographed by the conventional 100 kV electron microscope adjusted at “aberration free focus (AFF)” condition. In order to operate the microscope at AFF condition effectively, highly stabilized electron beams with small energy spread and small beam divergence are necessary. In the present observation, a 120 kV electron microscope with LaB6 electron gun was used. The most of the images were taken with the direct electron optical magnification of 1.3 million times and then magnified photographically.1. Twist boundary of ZnSFig. 1 is the image of wurtzite single crystal with twist boundary grown on the surface of zinc crystal by the reaction of sulphur vapour of 1540 Torr at 500°C. Crystal surface is parallel to (00.1) plane and electron beam is incident along the axis normal to the crystal surface. In the twist boundary there is a dislocation net work between two perfect crystals with a certain rotation angle.

Techniques for cryoultramicrotomy of propane jet frozen biological samples

1986 ◽  
Vol 44 ◽  
pp. 260-261
Author(s):  
B. Craig ◽  
L. Hawkey ◽  
A. LeFurgey
Keyword(s):  
Freeze Fracture ◽  
Freeze Substitution ◽  
Heart Cells ◽  
Crystal Formation ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Chick Heart ◽  
Embryonic Chick Heart ◽  
A New Technique

Ultra-rapid freezing followed by cryoultramicrotomy is essential for the preservation of diffusible elements in situ within cells prior to scanning transmission electron microscopy and quantitative energy dispersive x-ray microanalysis. For cells or tissue fragments in suspension and for monolayer cell cultures, propane jet freezing provides cooling rates greater than 30,000°C/sec with regions up to 40μm in thickness free of significant ice crystal formation. While this method of freezing has frequently been applied prior to freeze fracture or freeze substitution, it has not been widely utilized prior to cryoultramicrotomy and subsequent x-ray microanalytical studies. This report describes methods devised in our laboratory for cryosectioning of propane jet frozen kidney proximal tubule suspensions and cultured embryonic chick heart cells, in particular a new technique for mounting frozen suspension specimens for sectioning. The techniques utilize the same specimen supports and sample holders as those used for freeze fracture and freeze substitution and should be generally applicable to any cell suspension or culture preparation.

High-pressure freezing and freeze substitution of plant tissue

1992 ◽  
Vol 50 (1) ◽  
pp. 748-749
Author(s):  
William P. Sharp ◽  
Robert W. Roberson
Keyword(s):  
High Pressure ◽  
Cell Structure ◽  
Leaf Tissue ◽  
Freeze Substitution ◽  
Crystal Formation ◽  
Ice Crystal ◽  
High Pressure Freezing ◽  
Cell Components ◽  
Cold Metal ◽  
Brome Grass

The aim of ultrastructural investigation is to analyze cell architecture and relate a functional role(s) to cell components. It is known that aqueous chemical fixation requires seconds to minutes to penetrate and stabilize cell structure which may result in structural artifacts. The use of ultralow temperatures to fix and prepare specimens, however, leads to a much improved preservation of the cell’s living state. A critical limitation of conventional cryofixation methods (i.e., propane-jet freezing, cold-metal slamming, plunge-freezing) is that only a 10 to 40 μm thick surface layer of cells can be frozen without distorting ice crystal formation. This problem can be allayed by freezing samples under about 2100 bar of hydrostatic pressure which suppresses the formation of ice nuclei and their rate of growth. Thus, 0.6 mm thick samples with a total volume of 1 mm3 can be frozen without ice crystal damage. The purpose of this study is to describe the cellular details and identify potential artifacts in root tissue of barley (Hordeum vulgari L.) and leaf tissue of brome grass (Bromus mollis L.) fixed and prepared by high-pressure freezing (HPF) and freeze substitution (FS) techniques.

The “KIMWIPE” Effect in Ultra-Thin Cryosections

1985 ◽  
Vol 43 ◽  
pp. 458-459
Author(s):  
I. Taylor ◽  
P. Ingram ◽  
J.R. Sommer
Keyword(s):  
Skeletal Muscle ◽  
Electrical Stimulation ◽  
Muscle Fibers ◽  
Ice Crystals ◽  
Crystal Formation ◽  
Ice Crystal ◽  
Thin Sections ◽  
Skeletal Muscle Fibers ◽  
Freeze Dried ◽  
Ice Crystal Formation

In studying quick-frozen single intact skeletal muscle fibers for structural and microchemical alterations that occur milliseconds, and fractions thereof, after electrical stimulation, we have developed a method to compare, directly, ice crystal formation in freeze-substituted thin sections adjacent to all, and beneath the last, freeze-dried cryosections. We have observed images in the cryosections that to our knowledge have not been published heretofore (Figs.1-4). The main features are that isolated, sometimes large regions of the sections appear hazy and have much less contrast than adjacent regions. Sometimes within the hazy regions there are smaller areas that appear crinkled and have much more contrast. We have also observed that while the hazy areas remain still, the regions of higher contrast visibly contract in the beam, often causing tears in the sections that are clearly not caused by ice crystals (Fig.3, arrows).

HREM observation of NiO growth on submicron spheres of pure nickel

1989 ◽  
Vol 47 ◽  
pp. 548-549
Author(s):  
C.M. Teng ◽  
T.F. Kelly ◽  
J.P. Zhang ◽  
H.M. Lin ◽  
Y.W. Kim
Keyword(s):  
Nickel Oxide ◽  
Grain Boundaries ◽  
Pure Nickel ◽  
Submicron Particles ◽  
Crystal Formation ◽  
Nickel Wire ◽  
Liquid Droplets ◽  
Oxide Interface ◽  
Nickel Chromium ◽  
Chromium Alloys

Spherical submicron particles of materials produced by electrohydrodynamic (EHD) atomization have been used to study a variety of materials processes including nucleation of alternative crystallization phases in iron-nickel and nickel-chromium alloys, amorphous solidification in submicron droplets of pure metals, and quasi-crystal formation in nickel-chromium alloys. Some experiments on pure nickel, nickel oxide single crystals, the nickel/nickel(II) oxide interface, and grain boundaries in nickel monoxide have been performed by STEM. For these latter studies, HREM is the most direct approach to obtain particle crystal structures at the atomic level. Grain boundaries in nickel oxide have also been investigated by HREM. In this paper, we present preliminary results of HREM observations of NiO growth on submicron spheres of pure nickel.Small particles of pure nickel were prepared by EHD atomization. For the study of pure nickel, 0.5 mm diameter pure nickel wire (99.9975%) is sprayed directly in the EHD process. The liquid droplets solidify in free-flight through a vacuum chamber operated at about 10-7 torr.

Characteristics Of The Structure Formation Of Gypsum Binder Modified With Zinc Hydrosilicates

2020 ◽  
pp. 40-46
Keyword(s):  
Synergistic Effect ◽  
Physicochemical Properties ◽  
Structure Formation ◽  
Silicic Acid ◽  
Chemical Properties ◽  
Crystal Formation ◽  
Ability To Act ◽  
Chemical Factors ◽  
Sorption Characteristics

The authors' methodic for assessing the role of chemical and physic-chemical factors during the structure formation of gypsum stone is presented in the article. The methodic is also makes it possible to reveal the synergistic effect and to determine the ranges of variation of controls factors that ensure maximum values of such effect. The effect of a micro-sized modifier based on zinc hydro-silicates on the structure formation of building gypsum is analyzed and corresponding dependencies are found. It is shown that effects of influence of modifier on the properties of gypsum compositions are determined by chemical properties of modifier. Among the mentioned properties are sorption characteristics (which depend on the amount of silicic acid and its state) and physicochemical properties - the ability to act as a substrate during crystal formation. The proposed method can also be extended to other binding substances and materials. This article contributes to the understanding of the processes that occur during the structure formation of composites, which will make it possible to control the structure formation in the future, obtaining materials with a given set of properties.

Magnetic Properties of xCeO2•(50 − x) PbO•50B2O3 Glasses and Glass Ceramics

2017 ◽  
Vol 13 (1) ◽  
pp. 4486-4494 ◽  
Author(s):  
G.El Damrawi ◽  
F. Gharghar
Keyword(s):  
Magnetic Properties ◽  
Large Scale ◽  
Glass Ceramics ◽  
Magnetic Behavior ◽  
Crystal Formation ◽  
Dual Roles ◽  
Effective Agent ◽  
Ordered Structures ◽  
Essential Change

Cerium oxide in borate glasses of composition xCeO2·(50 − x)PbO·50B2O3 plays an important role in changing both microstructure and magnetic behaviors of the system. The structural role of CeO2 as an effective agent for cluster and crystal formation in borate network is clearly evidenced by XRD technique. Both structure and size of well-formed cerium separated clusters have an effective influence on the structural properties. The cluster aggregations are documented to be found in different range ordered structures, intermediate and long range orders are the most structures in which cerium phases are involved. The nano-sized crystallized cerium species in lead borate phase are evidenced to have magnetic behavior.  The criteria of building new specific borate phase enriched with cerium as ferrimagnetism has been found to keep the magnetization in large scale even at extremely high temperature. Treating the glass thermally or exposing it to an effective dose of ionized radiation is evidenced to have an essential change in magnetic properties. Thermal heat treatment for some of investigated materials is observed to play dual roles in the glass matrix. It can not only enhance alignment processes of the magnetic moment but also increases the capacity of the crystallite species in the magnetic phases. On the other hand, reverse processes are remarked under the effect of irradiation. The magnetization was found to be lowered, since several types of the trap centers which are regarded as defective states can be produced by effect of ionized radiation. 

Sign in / Sign up

Export Citation Format

Share Document