A Facile Non-Aqueous Approach for the Synthesis of Cu Nanowires

2013 ◽  
Vol 750-752 ◽  
pp. 245-248
Author(s):  
Jia Rui Jin ◽  
Yuan Zhi Chen ◽  
Hui Zhang Guo ◽  
Zhen Wei Wang ◽  
Dong Liang Peng
Keyword(s):  
Electron Microscopy ◽  
One Pot ◽  
X Ray ◽  
Chloride Dihydrate ◽  
Cu Nanowires ◽  
Transmission Electron ◽  
Metal Precursors ◽  
Pure Cu ◽  
Continuous Injection ◽  
Synthesis Approach

A non-aqueous synthetic route has been developed for the preparation of uniform Cu nanowires with length up to tens of micrometers. Unlike commonly used one-pot synthesis approach that usually involve a fast reduction of metal precursors in the presence of reducing agents, a continuous-injection approach has been to utilized to control the speed of reaction and the concentration of Cu nuclei. In this approach, copper (II) chloride dihydrate and nickel (II) acetylacetone which are dissolved in oleylamine solutions have been injected into octadecene by a syringe-pump. The as-prepared samples have been characterized by transmission electron microscopy, scanning electron microscopy and energy-dispersive X-ray spectroscopy. The results show that the products are pure Cu nanowires which have preferred <110> growth directions. The formation mechanism and major influencing factors on the synthesis of Cu nanowires have been discussed.

Optimization of Green Synthesis Approach of Silver Nanoparticles Using Indonesian Wild Honey

2021 ◽  
Vol 891 ◽  
pp. 111-115
Author(s):  
Maradhana Agung Marsudi ◽  
Farah Fitria Sari ◽  
Pandu Mauliddin Wicaksono ◽  
Adinda Asmoro ◽  
Arif Basuki ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Silver Nanoparticles ◽  
Green Synthesis ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Particle Count ◽  
Transmission Electron ◽  
Nitrate Precursor ◽  
Synthesis Approach

In this work, silver nanoparticles have been successfully synthesized using simple and environmentally friendly ‘green synthesis’ method using Indonesian wild honey as mediator. Particle count and size can be optimized by varying the silver nitrate precursor and honey concentration, with the help of sodium hydroxide as pH regulator. Based on X-ray diffraction (XRD) result, crystalline structure of Ag has been confirmed in sample with impurities from AgCl. Based on dynamic light scattering (DLS) and transmission electron microscopy (TEM) results, it was found that the smallest average particles size of AgNPs (117.5 nm from DLS and 11.1 nm from TEM) was obtained at sample with 5% w/v of honey and 0.5 mM of AgNO3.

An expeditious one-pot synthesis of pyrido[2,3-d]pyrimidines using Fe3O4–ZnO–NH2–PW12O40 nanocatalyst

2019 ◽  
Vol 43 (3-4) ◽  
pp. 135-139
Author(s):  
Pegah Farokhian ◽  
Manouchehr Mamaghani ◽  
Nosrat Ollah Mahmoodi ◽  
Khalil Tabatabaeian ◽  
Abdollah Fallah Shojaie
Keyword(s):  
Electron Microscopy ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
Facile Synthesis ◽  
Pyrimidine Derivatives ◽  
One Pot ◽  
X Ray ◽  
Transmission Electron ◽  
Novel Method ◽  
Operational Simplicity

An efficient protocol for the facile synthesis of a series of pyrido[2,3- d]pyrimidine derivatives has been developed applying Fe3O4–ZnO–NH2–PW12O40 nanocatalyst in water. This novel method has the benefits of operational simplicity, green aspects by avoiding toxic solvents and high to excellent yields of products. Fe3O4–ZnO–NH2–PW12O40 was synthesized and characterized by Fourier transform infrared, X-ray diffraction, vibrating sample magnetometer, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and transmission electron microscopy analyses. The nanocatalyst is readily isolated and recovered from the reaction mixture by an external magnet.

scholarly journals Facile One-Pot Biogenic Synthesis of Cu-Co-Ni Trimetallic Nanoparticles for Enhanced Photocatalytic Dye Degradation

Catalysts ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1138
Author(s):  
Abdulmohsen Ali Alshehri ◽  
Maqsood Ahmad Malik
Keyword(s):  
Electron Microscopy ◽  
Dye Degradation ◽  
Critical Role ◽  
Weight Changes ◽  
Origanum Vulgare ◽  
One Pot ◽  
Ftir Microscopy ◽  
Degradation Kinetic ◽  
X Ray ◽  
Metal Precursors

Biomolecules from plant extracts have gained significant interest in the synthesis of nanoparticles owing to their sustainable properties, cost efficiency, and environmental wellbeing. An eco-friendly and facile method has been developed to prepare Cu-Co-Ni trimetallic nanoparticles with simultaneous bio-reduction of Cu-Co-Ni metal precursors by aqueous extract of oregano (Origanum vulgare) leaves. Dramatic changes in physicochemical properties of trimetallic nanoparticles occur due to synergistic interactions between individual metal precursors, which in turn outclass the properties of corresponding monometallic nanoparticles in various aspects. The as biosynthesized Cu-Co-Ni trimetallic nanoparticles were initially analyzed using ultraviolet (UV)–visible spectroscopy. The morphology, structure, shape, and size of biosynthesized trimetallic nanoparticles were confirmed by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD) spectroscopy. The elemental analysis was carried out by energy-dispersive X-ray (EDX) spectroscopy. Fourier transform infrared (FTIR) microscopy was carried out to explain the critical role of the biomolecules in the Origanum vulgare leaf extract as capping and stabilizing agents in the nanoparticle formation. Additionally, simultaneous thermogravimetric analysis (TGA) and differential thermogravimetry (DTG) analysis was also performed to estimate the mass evaluation and rate of the material weight changes. The photocatalytic activity of as biosynthesized trimetallic nanoparticles was investigated towards methylene blue (MB) dye degradation and was found to be an efficient photocatalyst for dye degradation. Kinetic experiments have shown that photocatalytic degradation of MB dye followed pseudo-first-order kinetics. The mechanism of the photodegradation process of biogenic Cu-Co-Ni trimetallic nanoparticles was also addressed.

scholarly journals Formation of ZnO/Zn0.5Cd0.5Se Alloy Quantum Dots in the Presence of High Oleylamine Contents

Nanomaterials ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 999
Author(s):  
Yi-An Chen ◽  
Kuo-Hsien Chou ◽  
Yi-Yang Kuo ◽  
Cheng-Ye Wu ◽  
Po-Wen Hsiao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Quantum Dots ◽  
Particle Size ◽  
X Ray Diffraction ◽  
One Pot ◽  
X Ray ◽  
Transmission Electron ◽  
Average Size ◽  
Alloy Quantum Dots ◽  
First Time

To the best of our knowledge, this report presents, for the first time, the schematic of the possible chemical reaction for a one-pot synthesis of Zn0.5Cd0.5Se alloy quantum dots (QDs) in the presence of low/high oleylamine (OLA) contents. For high OLA contents, high-resolution transmission electron microscopy (HRTEM) results showed that the average size of Zn0.5Cd0.5Se increases significantly from 4 to 9 nm with an increasing OLA content from 4 to 10 mL. First, [Zn(OAc)2]–OLA complex can be formed by a reaction between Zn(OAc)2 and OLA. Then, Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) data confirmed that ZnO is formed by thermal decomposition of the [Zn(OAc)2]–OLA complex. The results indicated that ZnO grew on the Zn0.5Cd0.5Se surface, thus increasing the particle size. For low OLA contents, HRTEM images were used to estimate the average sizes of the Zn0.5Cd0.5Se alloy QDs, which were approximately 8, 6, and 4 nm with OLA loadings of 0, 2, and 4 mL, respectively. We found that Zn(OAc)2 and OLA could form a [Zn(OAc)2]–OLA complex, which inhibited the growth of the Zn0.5Cd0.5Se alloy QDs, due to the decreasing reaction between Zn(oleic acid)2 and Se2−, which led to a decrease in particle size.

scholarly journals Novel Graphene/In2O3 Nanocubes Preparation and Selective Electrochemical Detection for L-Lysine of Camellia nitidissima Chi

Materials ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1999
Author(s):  
Jinsheng Cheng ◽  
Sheng Zhong ◽  
Weihong Wan ◽  
Xiaoyuan Chen ◽  
Ali Chen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Electrochemical Sensor ◽  
Chiral Recognition ◽  
Graphene Nanosheets ◽  
Reduction Reaction ◽  
X Ray Diffraction ◽  
One Pot ◽  
X Ray ◽  
Transmission Electron ◽  
Camellia Nitidissima

In this work, novel graphene/In2O3 (GR/In2O3) nanocubes were prepared via one-pot solvothermal treatment, reduction reaction, and successive annealing technology at 600 °C step by step. Interestingly, In2O3 with featured cubic morphology was observed to grow on multi-layered graphene nanosheets, forming novel GR/In2O3 nanocubes. The resulting nanocomposites were characterized using transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction spectroscopy (XRD), etc. Further investigations demonstrated that a selective electrochemical sensor based on the prepared GR/In2O3 nanocubes can be achieved. By using the prepared GR/In2O3-based electrochemical sensor, the enantioselective and chem-selective performance, as well as the optimal conditions for L-Lysine detection in Camellia nitidissima Chi, were evaluated. The experimental results revealed that the GR/In2O3 nanocube-based electrochemical sensor showed good chiral recognition features for L-lysine in Camellia nitidissima Chi with a linear range of 0.23–30 μmol·L−1, together with selectivity and anti-interference properties for other different amino acids in Camellia nitidissima Chi.

Synthesis and Characterization of Novel AlF3 Cubes

NANO ◽  
2015 ◽  
Vol 10 (05) ◽  
pp. 1550071 ◽  
Author(s):  
Maoquan Xue ◽  
Changsheng Li
Keyword(s):  
Electron Microscopy ◽  
Synthesis And Characterization ◽  
Metal Fluoride ◽  
Controlled Synthesis ◽  
X Ray ◽  
Transmission Electron ◽  
Cubic Structure ◽  
Synthesis Approach ◽  
Scanning Electron

In this paper, regularly shaped AlF 3 particles with cubic structure were successfully synthesized via a solvothermal route. The as-prepared products were characterized by X-ray powder diffraction (XRD), energy-dispersive spectroscopy (EDS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The experimental results indicated that reaction temperature and time have significant effects on the morphology of the as-prepared products. A possible formation process has also been investigated on the basis of a series of XRD and SEM studies of the product obtained at different conditions. This well-controlled synthesis approach may be extended to fabricate other metal fluoride materials.

scholarly journals Synthesis of Flower-Like Cu2ZnSnS4Nanoflakes via a Microwave-Assisted Solvothermal Route

2014 ◽  
Vol 2014 ◽  
pp. 1-4 ◽  
Author(s):  
Fei Long ◽  
Shuyi Mo ◽  
Yan Zeng ◽  
Shangsen Chi ◽  
Zhengguang Zou
Keyword(s):  
Electron Microscopy ◽  
Raman Scattering ◽  
Zinc Acetate Dihydrate ◽  
X Ray Diffraction ◽  
One Pot ◽  
X Ray ◽  
Transmission Electron ◽  
Direct Band ◽  
Xrd Patterns ◽  
Average Size

Flower-like Cu2ZnSnS4(CZTS) nanoflakes were synthesized by a facile and fast one-pot solution reaction using copper(II) acetate monohydrate, zinc acetate dihydrate, tin(IV) chloride pentahydrate, and thiourea as starting materials. The as-synthesized samples were characterized by X-ray diffraction (XRD), Raman scattering analysis, field emission scanning electron microscopy (FESEM) equipped with an energy dispersion X-ray spectrometer (EDS), transmission electron microscopy (TEM), and UV-Vis absorption spectra. The XRD patterns shown that the as-synthesized particles were kesterite CZTS and Raman scattering analysis and EDS confirmed that kesterite CZTS was the only phase of product. The results of FESEM and TEM show that the as-synthesized particles were flower-like morphology with the average size of 1~2 μm which are composed of 50 nm thick nanoflakes. UV-Vis absorption spectrum revealed CZTS nanoflakes with a direct band gap of 1.52 eV.

scholarly journals Facile one-pot synthesis of water-soluble fcc FePt3 alloy nanostructures

2020 ◽  
Vol 2 (10) ◽  
Author(s):  
Melek Kızaloğlu Akbulut ◽  
Christina Harreiß ◽  
Mario Löffler ◽  
Karl J. J. Mayrhofer ◽  
Michael Schöbitz ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Scanning Transmission Electron Microscopy ◽  
Water Soluble ◽  
Alloy Nanoparticles ◽  
One Pot ◽  
X Ray ◽  
Scanning Transmission Electron ◽  
Transmission Electron ◽  
Scanning Transmission

Abstract Proccessible FePt3 alloy nanoparticles with sizes smaller than 50 nm open the avenue to novel magnetic sensor, catalytic and biomedical applications. Our research objective was to establish a highly scalable synthesis technique for production of single-crystalline FePt3 alloy nanoparticles. We have elaborated a one-pot thermal decomposition technique for the synthesis of superparamagnetic FePt3 nanoparticles (FePt3 NPs) with mean sizes of 10 nm. Subsequent tiron coating provided water solubility of the FePt3 NPs and further processibility as bidental ligands enable binding to catalyst surfaces, smart substrates or biosensors. The chemical composition, structure, morphology, magnetic, optical and crystallographic properties of the FePt3 NPs were examined using high resolution transmission electron microscopy, high-angle annular dark field-scanning transmission electron microscopy, scanning transmission electron microscopy-energy-dispersive X-ray spectroscopy mapping, Fourier transform infrared-attenuated total reflection, X-ray powder diffraction, X-ray photoelectron spectroscopy, vibrating sample magnetometry and UV–Vis absorption spectroscopy.

Superconductors in confined geometries

2005 ◽  
Vol 887 ◽  
Author(s):  
Zhili Xiao ◽  
Yew-San Hor ◽  
Ulrich Welp ◽  
Yasuo Ito ◽  
Umesh Patel ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Confined Geometries ◽  
Superconducting Nanowires ◽  
One Dimensional ◽  
X Ray ◽  
Transmission Electron ◽  
Synthesis Approach

ABSTRACTThe synthesis of nanoscale superconductors with controlled geometries is extremely challenging. In this paper we present results on synthesis and characterization of one-dimensional (1D) NbSe2 superconducting nanowires/nanoribbons. Our synthesis approach includes the synthesis of 1D NbSe3 nanostructure precursors followed by nondestructive and controlled adjustment of the Se composition to formulate NbSe2. The morphology, composition and crystallinity of the synthesized 1D NbSe2 nanostructures were analyzed with scanning electron microscopy, x-ray diffraction and transmission electron microscopy. Transport measurements were carried out to explore the electronic properties of these confined superconducting nanostructures.

scholarly journals Study on Growth Mechanism of Cu Nanowires and Its Application as Transparent Conducting Electrode

2019 ◽  
Vol 19 (1) ◽  
pp. 160
Author(s):  
Dedi Mardiansyah ◽  
Kuwat Triyana ◽  
Harsojo Harsojo
Keyword(s):  
Electron Microscopy ◽  
Growth Mechanism ◽  
Optical Microscope ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cu Nanowires ◽  
Transparent Conducting Electrode ◽  
Transparent Conducting ◽  
Conducting Electrode ◽  
Transmission Electron

Cu nanowires (CuNWs) were synthesized in an aqueous solution at low temperature using ethylenediamine (EDA) as a capping agent and hydrazine as a reducing agent. This study investigated the growth of mechanism CuNWs and fabricated the transparent conducting electrode. For the growth mechanism of CuNWs, the study was conducted with an optical microscope, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The performance of the transparent conducting electrode was studied with UV-Vis spectrometer and IV meters. CuNWs growth from Cu nanoparticles (CuNPs) in the solution. Transparent conducting electrode gave a sheet resistance of 48.8 Ohm/sq and the transmittance of 52.63%. The understanding of the growing mechanism of Cu nanowires is important for the development of CuNWs for alternative application as a transparent conducting electrode.

Sign in / Sign up

Export Citation Format

Share Document