The Study of Mathematical Model of the Solar Cell

2013 ◽  
Vol 805-806 ◽  
pp. 103-109
Author(s):  
Su Xia He ◽  
Lin Qin Yue ◽  
En Guang Zhao ◽  
Jian Chao Liu
Keyword(s):  
Mathematical Model ◽  
Solar Cell ◽  
Light Intensity ◽  
Reference Data ◽  
Characteristic Curve ◽  
Temperature Changes ◽  
Calculation Results ◽  
The Mathematical Model ◽  
The Relationship ◽  
Curve Equation

This paper mainly discusses the mathematical model of the solar cell and it I-V characteristic curve equation , discusses the the relationship between parameters. When changes of light intensity and temperature,We uesed measured value for the reference data , the value of ,,,are tested in 25°C,1000W/m2 the battery is the 3909 battery of Suntech. Then we given the Calculate value of ,,,in 25°C,800W/m2, 200W/m2. We uesed measured value for the reference data , the value of ,,,are tested in1000W/m2, 30°C, the battery is the 4209 battery of Suntech. then we given the Calculate value of ,,,in 40°Cand60°C. Finally ,we analysised the change of the four parameters with light intensity and temperature changes, it shows that the calculation results is consistent with the test data. It can reflect the relationship between I-V characteristic and the changes of light intensity and temperature. This study will help us to give the I-V characteristic and data directly , also help us to study solar cell easyly in any environment

Temperature Influence on Performance of Oxidation Ponds

1991 ◽  
Vol 24 (5) ◽  
pp. 85-96 ◽  
Author(s):  
Qingliang Zhao ◽  
Zijie Zhang
Keyword(s):  
Mathematical Model ◽  
Temperature Influence ◽  
Field Scale ◽  
Experiment Data ◽  
Computer Technique ◽  
Oxidation Pond ◽  
Optimum Model ◽  
Oxidation Ponds ◽  
The Mathematical Model ◽  
The Relationship

By means of simulated tests of a laboratory–scale oxidation pond model, the relationship between BOD5 and temperature fluctuation was researched. Mathematical modelling for the pond's performance and K1determination were systematically described. The calculation of T–K1–CeCe/Ci) was complex but the problem was solved by utilizing computer technique in the paper, and the mathematical model which could best simulate experiment data was developed. On the basis of experiment results,the concept of plug–ratio–coefficient is also presented. Finally the optimum model recommended here was verified with the field–scale pond data.

scholarly journals ПОБУДОВА МАТЕМАТИЧНОЇ МОДЕЛІ СКЛАДНОГО РУХУ ФЛАКОНІВ НА ЛІНІЯХ РОЗЛИВУ ЛІКІВ ФАРМАЦЕВТИЧНОЇ ПРОМИСЛОВОСТІ

2012 ◽  
Author(s):  
N. О. Kravets
Keyword(s):  
Mathematical Model ◽  
Experimental Evaluation ◽  
Theoretical Dependence ◽  
Complex Product ◽  
Lateral Lines ◽  
Calculation Results ◽  
The Mathematical Model

The  mathematical model of the complex product motion along the lateral lines at the plate conveyers of the bottle lines is presented in the artcle. The experimental evaluation of the gained theoretical dependence is suggested.   The calculation results coordinate well with the modelling and experiment resuls.

scholarly journals METHODS OF FORMULATING AND SOLVING OPTIMIZATION PROBLEMS OF CUTTING LOGS OF LARGE SIZE BY BAR-SAWING METHOD WITH CUTTING OUT ONE BAR AND FIVE PAIRS OF SIDE EDGING BOARDS WITH SUBSEQUENT SAWING LUMBER FOR EDGED BOARDS

2017 ◽  
Vol 7 (1) ◽  
pp. 137-150
Author(s):  
Агапов ◽  
Aleksandr Agapov
Keyword(s):  
Mathematical Model ◽  
Objective Function ◽  
Optimization Problem ◽  
Optimization Problems ◽  
Target Function ◽  
Cross Sectional ◽  
Optimization Task ◽  
Cutting Out ◽  
The Mathematical Model ◽  
The Relationship

For the first time the mathematical model of task optimization for this scheme of cutting logs, including the objective function and six equations of connection. The article discusses Pythagorean area of the logs. Therefore, the target function is represented as the sum of the cross-sectional areas of edging boards. Equation of the relationship represents the relationship of the diameter of the logs in the vertex end with the size of the resulting edging boards. This relationship is described through the use of the Pythagorean Theorem. Such a representation of the mathematical model of optimization task is considered a classic one. However, the solution of this mathematical model by the classic method is proved to be problematic. For the solution of the mathematical model we used the method of Lagrange multipliers. Solution algorithm to determine the optimal dimensions of the beams and side edging boards taking into account the width of cut is suggested. Using a numerical method, optimal dimensions of the beams and planks are determined, in which the objective function takes the maximum value. It turned out that with the increase of the width of the cut, thickness of the beam increases and the dimensions of the side edging boards reduce. Dimensions of the extreme side planks to increase the width of cut is reduced to a greater extent than the side boards, which are located closer to the center of the log. The algorithm for solving the optimization problem is recommended to use for calculation and preparation of sawing schedule in the design and operation of sawmill lines for timber production. When using the proposed algorithm for solving the optimization problem the output of lumber can be increased to 3-5 %.

Walking Stability Analysis of Multi-Legged Crablike Robot over Slope

2013 ◽  
Vol 572 ◽  
pp. 636-639
Author(s):  
Xi Chen ◽  
Gang Wang
Keyword(s):  
Mathematical Model ◽  
Stability Analysis ◽  
Stability Criterion ◽  
Stability Margin ◽  
Static Stability ◽  
Matlab Simulation ◽  
And Performance ◽  
The Stability ◽  
The Mathematical Model ◽  
The Relationship

This paper deals with the walking stability analysis of a multi-legged crablike robot over slope using normalized energy stability margin (NESM) method in order to develop a common stabilization description method and achieve robust locomotion for the robot over rough terrains. The robot is simplified with its static stability being described by NESM. The mathematical model of static stability margin is built so as to carry out the simulation of walking stability over slope for the crablike robot that walks in double tetrapod gait. As a consequence, the relationship between stability margin and the height of the robots centroid, as well as its inclination relative to the ground is calculated by the stability criterion. The success and performance of the stability criterion proposed is verified through MATLAB simulation and real-world experiments using multi-legged crablike robot.

KINEMATIC WAVE EQUATIONS FOR MOVABLE RIVERBEDS

2021 ◽  
pp. 43-54
Author(s):  
A. N. Krutov ◽  
◽  
S. Ya. Shkol’nikov ◽  
Keyword(s):  
Mathematical Model ◽  
Numerical Method ◽  
Wave Equations ◽  
Simple Wave ◽  
Kinematic Wave ◽  
Calculation Results ◽  
Self Similar ◽  
Similar Solutions ◽  
The Mathematical Model ◽  
Good Agreement

The mathematical model of kinematic wave, that is widely used in hydrological calculations, is generalized to compute processes in deformable channels. Self-similar solutions to the kinematic wave equations, namely, the discontinuous wave of increase and the “simple” wave of decrease are generalized. A numerical method is proposed for solving the kinematic wave equations for deformable channels. The comparison of calculation results with self-similar solutions revealed a good agreement.

Аpplication of the mathematical model of human torso for modeling abbreval influence in wound ballistics

2020 ◽  
Vol 22 (3) ◽  
pp. 132-139
Author(s):  
A. V. Denisov ◽  
M. D. Stepanov ◽  
N. A. Haraldin ◽  
A. V. Stepanov ◽  
A. I. Borovkov ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Element Model ◽  
Mechanical Action ◽  
Calculation Model ◽  
Calculation Results ◽  
Automated Processing ◽  
Original Calculation ◽  
Using Data ◽  
The Mathematical Model ◽  
Selection Of

Abstract. In the work, a review of scientific articles on the behavior of tissues and organs of the human body under local mechanical effects on it, as well as a description of the physico-mechanical properties of biological materials. The selection of mechanical behavior for each biological material as part of a mathematical model of the human torso was carried out, its finite element model was created, validation experiments were modeled using data presented in the literature. An original calculation model of a human torso with a tuned interaction of organs with each other was developed. Contact interaction parameters are determined. The developed computational model of a human torso was verified based on data from open sources for an experiment with mechanical action by a cylindrical impactor. An algorithm for processing pressure and acceleration graphs has been implemented in order to obtain tolerance curves. A specialized modular program has been created for the automated processing of calculation results and the output of the main results. 42 numerical tests were carried out simulating the entry of a steel ball into each of 21 zones for power engineers of 40 and 80 J. According to the results of the tests for each organ, pressure and acceleration tolerance curves were obtained, animations of the behavior of organs under shock were created, visualization of the pressure field propagation in organs was obtained torso.

Design and Implementation of Digital Asthma Diagnosis System

2019 ◽  
Vol 14 (3) ◽  
pp. 1-15
Author(s):  
Qinghua Yao ◽  
Xiantao Yang
Keyword(s):  
Mathematical Model ◽  
Mutation Rate ◽  
Forced Expiratory Volume ◽  
Digital Signals ◽  
Respiratory Parameters ◽  
The Mathematical Model ◽  
The Relationship ◽  
Objective Indicators ◽  
Signal Conditioning Circuit

In this article, the MSP430F149 is the microcontroller (MCU), and a pressure sensor, MPX5100AP, is used to measure body measurement of maximal forced expiratory volume (FEV) and peak expiratory flow rate (PEFR). The two analog signals are processed by the signal conditioning circuit, and then the corresponding digital signals are acquired by the MCU. With the related operations of multiple respiratory parameters, a built-up time of respiration signal mutation rate values and the determination of the mutation rate, a mathematical model is built among FEV, PEFR and the rate of variation. The mathematical model of the system is analyzed, and the relationship between the detection results and the degree of airway obstruction is established. Finally, the patient's condition analysis results are given directly on the LCD, which provided the objective indicators for the medical treatment of the disease.

scholarly journals Study on the Mathematical Model of Vacuum Breaker Valve for Large Air Mass Conditions

Water ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1358
Author(s):  
Zhang ◽  
Fan ◽  
Yu ◽  
Zhang ◽  
Lv ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Theoretical Basis ◽  
Isothermal Process ◽  
Air Mass ◽  
Protection Scheme ◽  
Calculation Results ◽  
Air Valve ◽  
The Mathematical Model ◽  
Valve Model ◽  
Derivation Process

The mathematical model of vacuum breaker valve is significant to the protection scheme. The more accurate the vacuum breaker valve model, the more reliable the calculation results. In this study, the application conditions of the air valve model are analyzed according to the assumptions used in the derivation, and the contradictions between these assumptions are proposed. Then, according to the different working characteristics between the vacuum breaker valve on the siphon outlet pipe and the air valve, the vacuum breaker valve model is deduced based on the modified assumptions. In the derivation process, the thermodynamic change of the gas in the vacuum breaker valve is assumed to follow the isentropic process rather than an isothermal process, and the water level in the vacuum breaker valve is considered to be changeable. An engineering case is introduced, and the results calculated according to the vacuum breaker valve model are compared with those resulting from the air valve model. The results indicate that the vacuum breaker valve model is suitable for large air mass conditions and can provide a theoretical basis for the numerical simulation and settings of vacuum breaker valves.

scholarly journals Modeling and Optimization of Bidirectional Clamping Forces in Drilling of Stacked Aluminum Alloy Plates

Materials ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 2866
Author(s):  
Jintong Liu ◽  
Anan Zhao ◽  
Piao Wan ◽  
Huiyue Dong ◽  
Yunbo Bi
Keyword(s):  
Mathematical Model ◽  
Finite Element ◽  
Aluminum Alloy ◽  
Clamping Force ◽  
Practical Application ◽  
Element Simulation ◽  
Theory Of Plates ◽  
Plates And Shells ◽  
The Mathematical Model ◽  
The Relationship

Interlayer burrs formation during drilling of stacked plates is a common problem in the field of aircraft assembly. Burrs elimination requires extra deburring operations which is time-consuming and costly. An effective way to inhibit interlayer burrs is to reduce the interlayer gap by preloading clamping force. In this paper, based on the theory of plates and shells, a mathematical model of interlayer gap with bidirectional clamping forces was established. The relationship between the upper and lower clamping forces was investigated when the interlayer gap reaches zero. The optimization of the bidirectional clamping forces was performed to reduce the degree and non-uniformity of the deflections of the stacked plates. Then, the finite element simulation was conducted to verify the mathematical model. Finally, drilling experiments were carried out on 2024-T3 aluminum alloy stacked plates based on the dual-machine-based automatic drilling and riveting system. The experimental results show that the optimized bidirectional clamping forces can significantly reduce the burr heights. The work in this paper enables us to understand the effect of bidirectional clamping forces on the interlayer gap and paves the way for the practical application.

Sign in / Sign up

Export Citation Format

Share Document