Expression and Purification of Serine Protease Inhibitor, OH-TCI, in Escherichia coli as a Thioredoxin Fusion Protein

2014 ◽  
Vol 926-930 ◽  
pp. 1100-1103
Author(s):  
Tong Yi Sun
Keyword(s):  
Large Scale ◽  
Blood Product ◽  
Serine Proteinase ◽  
Serine Protease Inhibitor ◽  
Blood Product Transfusion ◽  
Scale Production ◽  
Serine Proteinase Inhibitor ◽  
Expression And Purification ◽  
Preclinical Evaluation ◽  
Large Scale Production

The OH-TCI was the first report of Kunitz/BPTI serine proteinase inhibitor from snake venom with strong inhibitory activity against trypsin and chymotrypsin. Thus it is theoretically attractive in ameliorating the effects of acute pancreatitis and reducing allogeneic blood product transfusion during cardiac surgery. To accomplish preclinical evaluation with OH-TCI, large-scale production of OH-TCI is produced in Escherichia coli. The optimized OH-TCI codons were cloned into pET32a (+). OH-TCI expressed as Trx tag is solubility as fusion bodies. The amount of the purified Trx-OH-TCI from 1 liter culture was roughly 200 mg. The inhibitor constants (Ki) of Trx-OH-TCI, similar to the native OH-TCI, were 2.67×10-7 and 3.60×10-7 M M for trypsin and chymotrypsin, respectively.

scholarly journals Heterologous Expression and Purification Systems for Structural Proteomics of Mammalian Membrane Proteins

2002 ◽  
Vol 3 (6) ◽  
pp. 511-517 ◽  
Author(s):  
Isabelle Mus-Veteau
Keyword(s):  
Membrane Proteins ◽  
Heterologous Expression ◽  
Large Scale ◽  
Structural Information ◽  
Structural Data ◽  
Structural Proteomics ◽  
Scale Production ◽  
Expression And Purification ◽  
Large Scale Production ◽  
Heterologous Expression Systems

Membrane proteins (MPs) are responsible for the interface between the exterior and the interior of the cell. These proteins are implicated in numerous diseases, such as cancer, cystic fibrosis, epilepsy, hyperinsulinism, heart failure, hypertension and Alzheimer's disease. However, studies on these disorders are hampered by a lack of structural information about the proteins involved. Structural analysis requires large quantities of pure and active proteins. The majority of medically and pharmaceutically relevant MPs are present in tissues at very low concentration, which makes heterologous expression in large-scale production-adapted cells a prerequisite for structural studies. Obtaining mammalian MP structural data depends on the development of methods that allow the production of large quantities of MPs. This review focuses on the different heterologous expression systems, and the purification strategies, used to produce large amounts of pure mammalian MPs for structural proteomics.

I. S. A. Baud. Forms of Production and Women's Labour: Gender Aspects of Industrialisation in India and Mexico. New Delhi: Sage Publications. 1992. 321 pp.Hardbound. Price: Indian Rs 295.00.

1993 ◽  
Vol 32 (1) ◽  
pp. 129-131
Author(s):  
Naureen Talha
Keyword(s):  
Large Scale ◽  
Indian Society ◽  
New Delhi ◽  
Scale Production ◽  
Female Labour ◽  
Self Employment ◽  
Commodity Production ◽  
Large Scale Production ◽  
Mexican Society ◽  
Small Production

The literature on female labour in Third World countries has become quite extensive. India, being comparatively more advanced industrially, and in view of its size and population, presents a pictures of multiplicity of problems which face the female labour market. However, the author has also included Mexico in this analytical study. It is interesting to see the characteristics of developing industrialisation in two different societies: the Indian society, which is conservative, and the Mexican society, which is progressive. In the first chapter of the book, the author explains that he is not concerned with the process of industrialisation and female labour employed at different levels of work, but that he is interested in forms of production and women's employment in large-scale production, petty commodity production, marginal small production, and self-employment in the informal sector. It is only by analysis of these forms that the picture of females having a lower status is understood in its social and political setting.

An Efficient and Improved Process for the Synthesis of Itopride Hydrochloride and Trimethobenzamide Hydrochloride

2018 ◽  
Vol 15 (4) ◽  
pp. 572-575 ◽  
Author(s):  
Ponnusamy Kannan ◽  
Samuel I.D. Presley ◽  
Pallikondaperumal Shanmugasundaram ◽  
Nagapillai Prakash ◽  
Deivanayagam Easwaramoorthy
Keyword(s):  
Large Scale ◽  
Hydroxylamine Hydrochloride ◽  
Scale Production ◽  
One Pot ◽  
Hydrochloride Salt ◽  
Environmental Friendly ◽  
Large Scale Production ◽  
Non Ulcer Dyspepsia ◽  
Itopride Hydrochloride ◽  
Yield And Purity

Aim and Objective: Itopride is a prokinetic agent used for treating conditions like non-ulcer dyspepsia. Itopride is administered as its hydrochloride salt. Trimethobenzamide is used for treating nausea and vomiting and administered as its hydrochloride salt. The aim is to develop a novel and environmental friendly method for large-scale production of itopride and trimethobenzamide. Materials and Methods: Itopride and trimethobenzamide can be prepared from a common intermediate 4- (dimethylaminoethoxy) benzyl amine. The intermediate is prepared from one pot synthesis using Phyrdroxybenzaldehye and zinc dust and further reaction of the intermediate with substituted methoxy benzoic acid along with boric acid and PEG gives itopride and trimethobenzamide. Results: The intermediate 4-(dimethylaminoethoxy) benzylamine is prepared by treating p-hydroxybenzaldehyde and 2-dimethylaminoethyl chloride. The aldehyde formed is treated with hydroxylamine hydrochloride. The intermediate is confirmed by NMR and the purity is analysed by HPLC. Conclusion: Both itopride and trimethobenzamide were successfully synthesized by this method. The developed method is environmental friendly, economical for large-scale production with good yield and purity.

scholarly journals Cyanobacteria—From the Oceans to the Potential Biotechnological and Biomedical Applications

Marine Drugs ◽  
2021 ◽  
Vol 19 (5) ◽  
pp. 241
Author(s):  
Shaden A. M. Khalifa ◽  
Eslam S. Shedid ◽  
Essa M. Saied ◽  
Amir Reza Jassbi ◽  
Fatemeh H. Jamebozorgi ◽  
...  
Keyword(s):  
Bioactive Compounds ◽  
Biomedical Applications ◽  
Large Scale ◽  
Biological Activities ◽  
Scale Production ◽  
Pharmacological Activities ◽  
Large Scale Production ◽  
Marine Products ◽  
Hiv 1 ◽  
Successful Phase

Cyanobacteria are photosynthetic prokaryotic organisms which represent a significant source of novel, bioactive, secondary metabolites, and they are also considered an abundant source of bioactive compounds/drugs, such as dolastatin, cryptophycin 1, curacin toyocamycin, phytoalexin, cyanovirin-N and phycocyanin. Some of these compounds have displayed promising results in successful Phase I, II, III and IV clinical trials. Additionally, the cyanobacterial compounds applied to medical research have demonstrated an exciting future with great potential to be developed into new medicines. Most of these compounds have exhibited strong pharmacological activities, including neurotoxicity, cytotoxicity and antiviral activity against HCMV, HSV-1, HHV-6 and HIV-1, so these metabolites could be promising candidates for COVID-19 treatment. Therefore, the effective large-scale production of natural marine products through synthesis is important for resolving the existing issues associated with chemical isolation, including small yields, and may be necessary to better investigate their biological activities. Herein, we highlight the total synthesized and stereochemical determinations of the cyanobacterial bioactive compounds. Furthermore, this review primarily focuses on the biotechnological applications of cyanobacteria, including applications as cosmetics, food supplements, and the nanobiotechnological applications of cyanobacterial bioactive compounds in potential medicinal applications for various human diseases are discussed.

scholarly journals A Review on Additive Manufacturing Possibilities for Electrical Machines

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Three Dimensional ◽  
Electrical Machines ◽  
Electromagnetic Properties ◽  
Scale Production ◽  
Performance Parameters ◽  
Large Scale Production ◽  
One Step ◽  
Manufacturing Techniques

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

scholarly journals Stabilized Hydroxide-Mediated Nickel-Based Electrocatalysts for High-Current-Density Hydrogen Evolution in Alkaline Media

2021 ◽  
Author(s):  
Yuting Luo ◽  
Zhiyuan Zhang ◽  
Fengning Yang ◽  
Jiong Li ◽  
Zhibo Liu ◽  
...  
Keyword(s):  
Water Splitting ◽  
Large Scale ◽  
Fossil Fuels ◽  
High Current Density ◽  
Critical Energy ◽  
Alkaline Media ◽  
Scale Production ◽  
High Current ◽  
Large Scale Production ◽  
Electrochemical Water Splitting

Large-scale production of green hydrogen by electrochemical water splitting is considered as a promising technology to address critical energy challenges caused by the extensive use of fossil fuels. Although nonprecious...

scholarly journals Xylanolytic Bacillus species for xylooligosaccharides production: a critical review

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Rozina Rashid ◽  
Muhammad Sohail
Keyword(s):  
Large Scale ◽  
Extracellular Enzymes ◽  
Membrane Separation ◽  
Well Being ◽  
Bacillus Species ◽  
Scale Production ◽  
Food Ingredients ◽  
Large Scale Production ◽  
Wide Range ◽  
Biological Impacts

AbstractThe capacity of different Bacillus species to produce large amounts of extracellular enzymes and ability to ferment various substrates at a wide range of pH and temperature has placed them among the most promising hosts for the industrial production of many improved and novel products. The global interest in prebiotics, for example, xylooligosaccharides (XOs) is ever increasing, rousing the quest for various forms with expanded productivity. This article provides an overview of xylanase producing bacilli, with more emphasis on their capacity to be used in the production of the XOs, followed by the purification strategies, characteristics and application of XOs from bacilli. The large-scale production of XOs is carried out from a number of xylan-rich lignocellulosic materials by chemical or enzymatic hydrolysis followed by purification through chromatography, vacuum evaporation, solvent extraction or membrane separation methods. Utilization of XOs in the production of functional products as food ingredients brings well-being to individuals by improving defense system and eliminating pathogens. In addition to the effects related to health, a variety of other biological impacts have also been discussed.

scholarly journals Thermoelectric Performance of Mechanically Mixed BixSb2-xTe3—ABS Composites

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1706
Author(s):  
Zacharias Viskadourakis ◽  
Argiri Drymiskianaki ◽  
Vassilis M. Papadakis ◽  
Ioanna Ioannou ◽  
Theodora Kyratsi ◽  
...  
Keyword(s):  
Polymer Composites ◽  
Large Scale ◽  
Low Cost ◽  
Acrylonitrile Butadiene Styrene ◽  
Thermoelectric Performance ◽  
Scale Production ◽  
Bismuth Antimony Telluride ◽  
Mechanical Mixing ◽  
Large Scale Production ◽  
Bi Doping

In the current study, polymer-based composites, consisting of Acrylonitrile Butadiene Styrene (ABS) and Bismuth Antimony Telluride (BixSb2−xTe3), were produced using mechanical mixing and hot pressing. These composites were investigated regarding their electrical resistivity and Seebeck coefficient, with respect to Bi doping and BixSb2-xTe3 loading into the composite. Experimental results showed that their thermoelectric performance is comparable—or even superior, in some cases—to reported thermoelectric polymer composites that have been produced using other complex techniques. Consequently, mechanically mixed polymer-based thermoelectric materials could be an efficient method for low-cost and large-scale production of polymer composites for potential thermoelectric applications.

Iron and Nitrogen Co-doped CoSe2 Nanosheet Arrays for Robust Electrocatalytic Water Oxidation

2021 ◽  
Author(s):  
Di Li ◽  
Yingying Xing ◽  
Changjian Zhou ◽  
Yikai Lu ◽  
Shengjie Xu ◽  
...  
Keyword(s):  
Water Splitting ◽  
Water Oxidation ◽  
Energy Barrier ◽  
Large Scale ◽  
Scale Production ◽  
Reaction Energy ◽  
Large Scale Production ◽  
Nanosheet Arrays ◽  
Production Of Hydrogen ◽  
Co Doped

The high reaction energy barrier of the oxygen evolution reaction (OER) extremely reduces the efficiency of water splitting, which is not conducive to large-scale production of hydrogen. Due to the...

Sign in / Sign up

Export Citation Format

Share Document