Evaluation and Characterization of TiAlZr Alloys Coated with Apatite or Albumin-Apatite Composite

2007 ◽  
Vol 361-363 ◽  
pp. 733-736 ◽  
Author(s):  
D. Ionita ◽  
E. Aldea ◽  
G. Stanciu ◽  
Ioana Demetrescu
Keyword(s):  
Surface Characteristics ◽  
Biologically Active

The aim of this paper was to find and establish the contact: biomaterial implant (TiAlZr) - coated with biologically active molecules; and the correlation between surface characteristics and their efficiency.

Characterization of photosystem II with the atomic-force microscope

1992 ◽  
Vol 50 (2) ◽  
pp. 1146-1147
Author(s):  
Kathleen M. Marr ◽  
Mary K. Lyon
Keyword(s):  
Photosystem Ii ◽  
Atomic Force Microscope ◽  
Three Dimensional ◽  
Biologically Active ◽  
Atomic Force ◽  
Freeze Etching ◽  
Image Averaging ◽  
Oxygen Evolving ◽  
Averaging Techniques

Photosystem II (PSII) is different from all other reaction centers in that it splits water to evolve oxygen and hydrogen ions. This unique ability to evolve oxygen is partly due to three oxygen evolving polypeptides (OEPs) associated with the PSII complex. Freeze etching on grana derived insideout membranes revealed that the OEPs contribute to the observed tetrameric nature of the PSIl particle; when the OEPs are removed, a distinct dimer emerges. Thus, the surface of the PSII complex changes dramatically upon removal of these polypeptides. The atomic force microscope (AFM) is ideal for examining surface topography. The instrument provides a topographical view of individual PSII complexes, giving relatively high resolution three-dimensional information without image averaging techniques. In addition, the use of a fluid cell allows a biologically active sample to be maintained under fully hydrated and physiologically buffered conditions. The OEPs associated with PSII may be sequentially removed, thereby changing the surface of the complex by one polypeptide at a time.

Characterization of Biologically Active Substances from Calendula officinalis

2018 ◽  
Vol 18 (14) ◽  
pp. 1167-1174 ◽  
Author(s):  
Petra Lovecka ◽  
Jan Lipov ◽  
Kamila Thumova ◽  
Anna Macurkova
Keyword(s):  
Biologically Active Substances ◽  
Biologically Active ◽  
Calendula Officinalis ◽  
Active Substances

scholarly journals Fabrication and Characterization of Antimicrobial Magnetron Cosputtered TiO2/Ag/Cu Composite Coatings

Coatings ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 473
Author(s):  
Dilyana Gospodonova ◽  
Iliana Ivanova ◽  
Todorka Vladkova
Keyword(s):  
Antimicrobial Activity ◽  
Composite Coatings ◽  
Surface Characteristics ◽  
Standard Test ◽  
Most Probable Number ◽  
Bacterial Strains ◽  
Probable Number ◽  
Fabrication And Characterization

The aim of this study was to prepare TiO2/Ag/Cu magnetron co-sputtered coatings with controlled characteristics and to correlate them with the antimicrobial activity of the coated glass samples. The elemental composition and distribution, surface morphology, wettability, surface energy and its component were estimated as the surface characteristics influencing the bioadhesion. Well expressed, specific, Ag/Cu concentration-dependent antimicrobial activity in vitro was demonstrated toward Gram-negative and Gram-positive standard test bacterial strains both by diffusion 21 assay and by Most Probable Number of surviving cells. Direct contact and eluted silver/coper nanoparticles killing were experimentally demonstrated as a mode of the antimicrobial action of the studied TiO2/Ag/Cu thin composite coatings. It is expected that they would ensure a broad spectrum bactericidal activity during the indwelling of the coated medical devices and for at least 12 h after that, with the supposition that the benefits will be over a longer time.

scholarly journals Post-Processing and Surface Characterization of Additively Manufactured Stainless Steel 316L Lattice: Implications for BioMedical Use

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1376
Author(s):  
Alex Quok An Teo ◽  
Lina Yan ◽  
Akshay Chaudhari ◽  
Gavin Kane O’Neill
Keyword(s):  
Surface Roughness ◽  
Stainless Steel ◽  
Surface Characterization ◽  
High Surface ◽  
Surface Characteristics ◽  
Post Processing ◽  
Stainless Steel 316L ◽  
Processing Methods ◽  
Particulate Debris

Additive manufacturing of stainless steel is becoming increasingly accessible, allowing for the customisation of structure and surface characteristics; there is little guidance for the post-processing of these metals. We carried out this study to ascertain the effects of various combinations of post-processing methods on the surface of an additively manufactured stainless steel 316L lattice. We also characterized the nature of residual surface particles found after these processes via energy-dispersive X-ray spectroscopy. Finally, we measured the surface roughness of the post-processing lattices via digital microscopy. The native lattices had a predictably high surface roughness from partially molten particles. Sandblasting effectively removed this but damaged the surface, introducing a peel-off layer, as well as leaving surface residue from the glass beads used. The addition of either abrasive polishing or electropolishing removed the peel-off layer but introduced other surface deficiencies making it more susceptible to corrosion. Finally, when electropolishing was performed after the above processes, there was a significant reduction in residual surface particles. The constitution of the particulate debris as well as the lattice surface roughness following each post-processing method varied, with potential implications for clinical use. The work provides a good base for future development of post-processing methods for additively manufactured stainless steel.

scholarly journals Unravelling the Skin Secretion Peptides of the Gliding Leaf Frog, Agalychnis spurrelli (Hylidae)

Biomolecules ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 667 ◽  
Author(s):  
Carolina Proaño-Bolaños ◽  
Ailín Blasco-Zúñiga ◽  
José Rafael Almeida ◽  
Lei Wang ◽  
Miguel Angel Llumiquinga ◽  
...  
Keyword(s):  
Inhibitory Concentration ◽  
Structural Diversity ◽  
Biologically Active ◽  
Biological Characterization ◽  
Skin Secretion ◽  
Peptide Profile ◽  
Active Chemical ◽  
Molecular Masses ◽  
Skin Secretions

Frog skin secretions contain medically-valuable molecules, which are useful for the discovery of new biopharmaceuticals. The peptide profile of the skin secretion of Agalychnis spurrelli has not been investigated; therefore, the structural and biological characterization of its compounds signify an inestimable opportunity to acquire new biologically-active chemical scaffolds. In this work, skin secretion from this amphibian was analysed by molecular cloning and tandem mass spectrometry. Although the extent of this work was not exhaustive, eleven skin secretion peptides belonging to five peptide families were identified. Among these, we report the occurrence of two phyllokinins, and one medusin-SP which were previously reported in other related species. In addition, eight novel peptides were identified, including four dermaseptins, DRS-SP2 to DRS-SP5, one phylloseptin-SP1, and three orphan peptides. Phylloseptin-SP1 and dermaseptins-SP2 were identified in HPLC fractions based on their molecular masses determined by MALDI-TOF MS. Among the antimicrobial peptides, dermaseptin-SP2 was the most potent, inhibiting Escherichia coli, Staphylococcus aureus, and ORSA with a minimum inhibitory concentration (MIC) of 2.68 μM, and Candida albicans with an MIC of 10.71 μM, without haemolytic effects. The peptides described in this study represent but a superficial glance at the considerable structural diversity of bioactive peptides produced in the skin secretion of A. spurrelli.

STUDIES ON ACTH-BINDING ANTIBODIES: CHARACTERIZATION OF IMMUNOLOGICAL SPECIFICITIES

1969 ◽  
Vol 62 (3) ◽  
pp. 521-536 ◽  
Author(s):  
M. L. Aubert ◽  
J.-P. Felber
Keyword(s):  
Binding Sites ◽  
Competitive Inhibition ◽  
Biologically Active ◽  
Active Part ◽  
Terminal Portion ◽  
Plasma Acth ◽  
Acth Fragments ◽  
Selection Of

ABSTRACT In investigations on the production and the specificity of anti-ACTH antibodies used for radioimmunoassay, differences have been observed between the various antibodies obtained. It was shown by means of competitive inhibition with different ACTH fragments that the binding of the ACTH molecule to its antibody can occur at different sites along the ACTH peptide. By varying the concentrations of the fragments and the conditions of the assays, it was possible to study the properties of each antibody. Thus antibodies which bind the N-terminal portion, or which exclusively bind the biologically active part of the ACTH chain (1–20), are the most suitable for radioimmunoassay. It was found, however, that the production of antiserum was generally more frequent when binding occurred to the C-terminal portion of the ACTH peptide. Should the presence of such fragments in plasma be confirmed, then the use of these antisera could lead to erroneous measurement of biologically inactive ACTH fragments. Thus, this study reveals that a selection of the antibody for specificity might be necessary for its application to the radioimmunoassay of plasma ACTH, and that this selection could be performed with the use of ACTH fragments. An approach to the problem of binding sites between antigen and antibody has been described and the possibility of introducing a radioimmunoassay for plasma ACTH fragments discussed.

Construction and Characterization of Retroviral Vectors Expressing Biologically Active Human Interleukin-12

1994 ◽  
Vol 5 (12) ◽  
pp. 1493-1506 ◽  
Author(s):  
Laurence Zitvogel ◽  
Hideaki Tahara ◽  
Quan Cai ◽  
Walter J. Storkus ◽  
Gunhild Muller ◽  
...  
Keyword(s):  
Retroviral Vectors ◽  
Biologically Active ◽  
Interleukin 12

Expression of Biologically Active Procorticotrophin-Releasing Hormone (proCRH) in Stably Transfected CHO-K1 Cells: Characterization of Nuclear proCRH

1995 ◽  
Vol 7 (4) ◽  
pp. 263-272 ◽  
Author(s):  
Ewan Morrison ◽  
Peter Tomasec ◽  
Elizabeth A. Linton ◽  
Philip J. Lowry ◽  
Pedro R. Lowenstein ◽  
...  
Keyword(s):  
Biologically Active ◽  
Releasing Hormone
Sign in / Sign up

Export Citation Format

Share Document