Multi-Level Storage in Lateral Phase Change Memory: From 3 to 16 Resistance Levels

2013 ◽  
Vol 534 ◽  
pp. 131-135
Author(s):  
You Yin ◽  
Rosalena Irma Alip ◽  
Yu Long Zhang ◽  
Ryota Kobayashi ◽  
Sumio Hosaka
Keyword(s):  
Phase Change ◽  
Active Medium ◽  
Low Cost ◽  
Single Layer ◽  
Dynamic Switching ◽  
Non Volatile Memory ◽  
Controlled Crystallization ◽  
Multi Level ◽  
Switching Characteristics ◽  
20 Nm

Here, we report multi-level storage (MLS) in multi-layer (ML) and single-layer (SL) phase change memories (PCM). For the former ML-PCM device, the active medium with two layers of chalcogenide consists of a top 30 nm TiN/180 nm SbTeN/20 nm TiN/bottom 120 nm SbTeN stacked multi-layer. Three stable and distinct resistance states are demonstrated in both static and dynamic switching characteristics of the multi-layer devices. For the latter SL-PCM device, the active medium with only one layer of chalcogenide consists of a top 50 nm TiN/150 nm SbTeN. We demonstrate that the number of distinguishable resistance levels can readily reach 16 and even higher. These levels in this study result from the initial threshold switching and the subsequent current-controlled crystallization induced by Joule heating. Therefore, the latter memory allows the creation of many distinct levels, thus enabling the low-cost ultra-high-density non-volatile memory.

Switching characteristics of W/Zr/HfO2/TiN ReRAM devices for multi-level cell non-volatile memory applications

2015 ◽  
Vol 30 (7) ◽  
pp. 075002 ◽  
Author(s):  
Wenbo Chen ◽  
Wenchao Lu ◽  
Branden Long ◽  
Yibo Li ◽  
David Gilmer ◽  
...  
Keyword(s):  
Non Volatile Memory ◽  
Multi Level ◽  
Volatile Memory ◽  
Switching Characteristics ◽  
Memory Applications

Bamboo Waste-based Bio-composite Substance: An application for Low-cost Construction Materials

2020 ◽  
Vol 4 (1) ◽  
pp. 41-48
Author(s):  
Teodoro Astorga Amatosa ◽  
Michael E. Loretero
Keyword(s):  
Composite Materials ◽  
Sea Water ◽  
Raw Materials ◽  
Low Cost ◽  
Construction Materials ◽  
Single Layer ◽  
High Strength ◽  
Green Technology ◽  
Experimental Medium ◽  
Natural Treatment

Bamboo is a lightweight and high-strength raw materials that encouraged researchers to investigate and explore, especially in the field of biocomposite and declared as one of the green-technology on the environment as fully accountable as eco-products. This research was to assess the technical feasibility of making single-layer experimental Medium-Density Particleboard panels from the bamboo waste of a three-year-old (Dendrocalamus asper). Waste materials were performed to produce composite materials using epoxy resin (C21H25C105) from a natural treatment by soaking with an average of pH 7.6 level of sea-water. Three different types of MDP produced, i.e., bamboo waste strip MDP (SMDP), bamboo waste chips MDP (CMDP) and bamboo waste mixed strip-chips MDP (MMDP) by following the same process. The experimental panels tested for their physical-mechanical properties according to the procedures defined by ASTM D1037-12. Conclusively, even the present study shows properties of MDP with higher and comparable to other composite materials; further research must be given better attention as potential substitute to be used as hardwood materials, especially in the production, design, and construction usage.

A Novel Wideband transition from Substrate Integrated Waveguide to Rectangular Waveguide

2020 ◽  
Vol 10 ◽  
Author(s):  
Keyur Mahant ◽  
Hiren Mewada ◽  
Amit Patel ◽  
Alpesh Vala ◽  
Jitendra Chaudhari
Keyword(s):  
Rectangular Waveguide ◽  
Printed Circuit Board ◽  
Low Cost ◽  
Single Layer ◽  
Circuit Board ◽  
Substrate Integrated Waveguide ◽  
Ka Band ◽  
Better Than ◽  
Millimeter Wave Circuits ◽  
Wideband Transition

Aim: In this article, wideband substrate integrated waveguide (SIW) and rectangular waveguide (RWG) transition operating in Ka-band is proposed Objective: In this article, wideband substrate integrated waveguide (SIW) and rectangular waveguide (RWG) transition operating in Ka-band is proposed. Method: Coupling patch etched on the SIW cavity to couple the electromagnetic energy from SIW to RWG. Moreover, metasurface is introduced into the radiating patch to enhance bandwidth. To verify the functionality of the proposed structure back to back transition is designed and fabricated on a single layer substrate using standard printed circuit board (PCB) fabrication technology. Results: Measured results matches with the simulation results, measured insertion loss is less than 1.2 dB and return loss is better than 3 dB for the frequency range of 28.8 to 36.3 GHz. By fabricating transition with 35 SRRs bandwidth of the proposed transition can be improved. Conclusion: The proposed transition has advantages like compact in size, easy to fabricate, low cost and wide bandwidth. Proposed structure is a good candidate for millimeter wave circuits and systems.

scholarly journals Multi-level characteristics of TiOx transparent non-volatile resistive switching device by embedding SiO2 nanoparticles

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sera Kwon ◽  
Min-Jung Kim ◽  
Kwun-Bum Chung
Keyword(s):  
Resistive Switching ◽  
High Performance ◽  
Sio2 Nanoparticles ◽  
Visible Range ◽  
Resistive State ◽  
Switching Device ◽  
Structural Density ◽  
Multi Level ◽  
Switching Characteristics ◽  
Switching Devices

AbstractTiOx-based resistive switching devices have recently attracted attention as a promising candidate for next-generation non-volatile memory devices. A number of studies have attempted to increase the structural density of resistive switching devices. The fabrication of a multi-level switching device is a feasible method for increasing the density of the memory cell. Herein, we attempt to obtain a non-volatile multi-level switching memory device that is highly transparent by embedding SiO2 nanoparticles (NPs) into the TiOx matrix (TiOx@SiO2 NPs). The fully transparent resistive switching device is fabricated with an ITO/TiOx@SiO2 NPs/ITO structure on glass substrate, and it shows transmittance over 95% in the visible range. The TiOx@SiO2 NPs device shows outstanding switching characteristics, such as a high on/off ratio, long retention time, good endurance, and distinguishable multi-level switching. To understand multi-level switching characteristics by adjusting the set voltages, we analyze the switching mechanism in each resistive state. This method represents a promising approach for high-performance non-volatile multi-level memory applications.

scholarly journals Encapsulation of Phase Change Materials Using Layer-by-Layer Assembled Polyelectrolytes

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Qiangying Yi ◽  
Gleb B. Sukhorokov ◽  
Jin Ma ◽  
Xiaobo Yang ◽  
Zhongwei Gu
Keyword(s):  
Phase Change ◽  
Phase Change Materials ◽  
Low Cost ◽  
Sodium Dodecyl ◽  
Layer By Layer ◽  
Latent Heat Storage ◽  
Good Thermal Stability ◽  
Lbl Assembly ◽  
Acid Sodium Salt ◽  
Assembly Technique

Phase change materials absorb the thermal energy when changing their phases (e.g., solid-to-liquid) at constant temperatures to achieve the latent heat storage. The major drawbacks such as limited thermal conductivity and leakage prevent the PCMs from wide application in desired areas. In this work, an environmentally friendly and low cost approach, layer-by-layer (LbL) assembly technique, was applied to build up ultrathin shells to encapsulate the PCMs and therefore to regulate their changes in volume when the phase change occurs. Generally, the oppositely charged strong polyelectrolytes Poly(diallyldimethylammonium chloride) (PDADMAC) and Poly(4-styrenesulfonic acid) sodium salt (PSS) were employed to fabricate multilayer shells on emulsified octadecane droplets using either bovine serum albumin (BSA) or sodium dodecyl sulfate (SDS) as surfactant. Specifically, using BSA as the surfactant, polyelectrolyte encapsulated octadecane spheres in size of ∼500 nm were obtained, with good shell integrity, high octadecane content (91.3% by mass), and good thermal stability after cycles of thermal treatments.

scholarly journals A single layer deposition of Li-doped mesoporous TiO2 beads for low-cost and efficient dye-sensitized solar cells

2021 ◽  
Vol 45 (5) ◽  
pp. 2470-2477
Author(s):  
P. Golvari ◽  
E. Nouri ◽  
N. Mohsenzadegan ◽  
M. R. Mohammadi ◽  
S. O. Martinez-Chapa
Keyword(s):  
Light Scattering ◽  
Low Cost ◽  
Dye Sensitized Solar Cells ◽  
Single Layer ◽  
Cost Effective ◽  
Mesoporous Tio2 ◽  
Trap States ◽  
Dye Sensitized ◽  
Layer Deposition ◽  
Sensitized Solar Cells

Cost-effective DSCs with superior electronic properties are gained by a reduction in electronic trap states and outstanding light scattering and harvesting.

scholarly journals Single-Layer Line-Fed Broadband Microstrip Patch Antenna on Thin Substrates

Electronics ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 37
Author(s):  
Roberto Vincenti Gatti ◽  
Riccardo Rossi ◽  
Marco Dionigi
Keyword(s):  
Patch Antenna ◽  
State Of The Art ◽  
Low Cost ◽  
Single Layer ◽  
Microstrip Antennas ◽  
Microstrip Patch Antenna ◽  
Layer Line ◽  
Limited Bandwidth ◽  
Microstrip Patch ◽  
Effective Design

In this work, the issue of limited bandwidth typical of microstrip antennas realized on a single thin substrate is addressed. A simple yet effective design approach is proposed based on the combination of traditional single-resonance patch geometries. Two novel shaped microstrip patch antenna elements with an inset feed are presented. Despite being printed on a single-layer substrate with reduced thickness, both radiators are characterized by a broadband behavior. The antennas are prototyped with a low-cost and fast manufacturing process, and measured results validate the simulations. State-of-the-art performance is obtained when compared to the existing literature, with measured fractional bandwidths of 3.71% and 6.12% around 10 GHz on a 0.508-mm-thick Teflon-based substrate. The small feeding line width could be an appealing feature whenever such radiating elements are to be used in array configurations.

scholarly journals 2D MoS2 Encapsulated Silicon Nanopillar Array with High-Performance Light Trapping Obtained by Direct CVD Process

Crystals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 267
Author(s):  
Minyu Bai ◽  
Zhuoman Wang ◽  
Jijie Zhao ◽  
Shuai Wen ◽  
Peiru Zhang ◽  
...  
Keyword(s):  
Silicon Substrate ◽  
High Performance ◽  
Low Cost ◽  
Light Trapping ◽  
Incident Light ◽  
Single Layer ◽  
Chemical Vapor ◽  
Optoelectronic Device ◽  
Planar Silicon ◽  
Shortwave Infrared

Weak absorption remains a vital factor that limits the application of two-dimensional (2D) materials due to the atomic thickness of those materials. In this work, a direct chemical vapor deposition (CVD) process was applied to achieve 2D MoS2 encapsulation onto the silicon nanopillar array substrate (NPAS). Single-layer 2D MoS2 monocrystal sheets were obtained, and the percentage of the encapsulated surface of NPAS was up to 80%. The reflection and transmittance of incident light of our 2D MoS2-encapsulated silicon substrate within visible to shortwave infrared were significantly reduced compared with the counterpart planar silicon substrate, leading to effective light trapping in NPAS. The proposed method provides a method of conformal deposition upon NPAS that combines the advantages of both 2D MoS2 and its substrate. Furthermore, the method is feasible and low-cost, providing a promising process for high-performance optoelectronic device development.

scholarly journals Towards One-Dollar Robots: An Integrated Design and Fabrication Strategy for Electromechanical Systems

Robotica ◽  
2020 ◽  
pp. 1-17
Author(s):  
Wenzhong Yan ◽  
Ankur Mehta
Keyword(s):  
Low Cost ◽  
Integrated Design ◽  
Single Layer ◽  
Constant Current ◽  
Electromechanical Systems ◽  
Robot Controller ◽  
Electrical Oscillation ◽  
Robotic Devices ◽  
Sewing Threads ◽  
Polyester Film

SUMMARY To improve the accessibility of robotics, we propose a design and fabrication strategy to build low-cost electromechanical systems for robotic devices. Our method, based on origami-inspired cut-and-fold and E-textiles techniques, aims at minimizing the resources for robot creation. Specifically, we explore techniques to create robots with the resources restricted to single-layer sheets (e.g., polyester film) and conductive sewing threads. To demonstrate our strategy’s feasibility, these techniques are successfully integrated into an electromechanical oscillator (about 0.40 USD), which can generate electrical oscillation under constant-current power and potentially be used as a simple robot controller in lieu of additional external electronics.

Sign in / Sign up

Export Citation Format

Share Document