Optical Properties of Cholesteric Liquid Crystal Elastomer Film

2021 ◽  
Vol 888 ◽  
pp. 49-55
Author(s):  
Hong Yu Liu ◽  
Xiao Yan Wang ◽  
Xiang Yu Zang ◽  
Mei Tian
Keyword(s):  
Differential Scanning Calorimetry ◽  
Liquid Crystal ◽  
Cholesteric Liquid Crystal ◽  
Cross Linking ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Liquid Crystal Elastomer ◽  
Chemical Structures ◽  
Optical Micrograph ◽  
Infrared Spectrometer

A series of liquid crystal elastomer (LCE) films (ABC films) were prepared by polymerization of polymethylhydrosiloxane (PMHS), liquid crystal (LC) monomer cholesterol 4-(allyloxy) benzoate (MB) and cross-linking agent 4'-(undec-10-enoyloxy)-[1,1'-biphenyl]-4-yl dodec-11-enoate (MC) . The chemical structures and LC properties of the monomers and polymers were characterised by Fourier Transform Infrared Spectrometer (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TG), polarized optical micrograph (POM) and X-ray diffractometer (XRD). MB is a cholesteric LC and MC is a smectic LC. The ABC films are cholesteric LCEs. The temperature at which 5% weight loss occurred for the ABC films are around 300 °C. The glass transition temperature of ABC films increases with the increase of LC monomer MB content. The ABC films have a strong absorption around 200-330nm in the ultraviolet (UV) region, and the absorption range does not change with temperature.

Inosose-Flüssigkristalle / Inosose Liquid Crystals

1990 ◽  
Vol 45 (7) ◽  
pp. 1084-1090 ◽  
Author(s):  
Klaus Praefcke ◽  
Bernd Kohne ◽  
Andreas Eckert ◽  
Joachim Hempel
Keyword(s):  
Differential Scanning Calorimetry ◽  
Liquid Crystal ◽  
High Temperature ◽  
Liquid Crystalline ◽  
Structural Features ◽  
Lyotropic Liquid Crystal ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Alkyl Chains

Six S,S-dialkyl acetals 2a-f of inosose (1), tripodal in structure, have been synthesized, characterized and investigated by optical microscopy and differential scanning calorimetry (d.s.c.). The four S,S-acetals 2c-f with sufficiently long alkyl chains are thermotropic liquid crystalline; 2 e and 2 f are even dithermomesomorphic. Each of these four inosose derivatives 2c-f exhibits monotropically a most likely cubic mesophase (MI); in addition 2e and 2f show enantiotropically a hexagonal mesophase (Hx) with a non-covalent, supramolecular H-bridge architecture. Whereas the nature of the optically isotropic mesophase MI needs further clarification the stable high temperature mesophase Hx of 2 e and 2 f has been established by a miscibility test using a sugar S,S-dialkyl acetal also tripodal in structure and with a Hx phase proved by X-ray diffraction, but in contrast to 2 with an acyclic hydrophilic part. Similarities of structural features between the Hx-phases of 2e and 2f as well as of other thermotropic and lyotropic liquid crystal systems are discussed briefly.

scholarly journals Mesomorphism behaviour and photoluminescent properties of new asymmetrical 1,2-di(4-alkoxybenzylidene)hydrazines

2019 ◽  
Vol 43 (1-2) ◽  
pp. 67-77 ◽  
Author(s):  
Adil A Awad ◽  
Al-Ameen Bariz OmarAli ◽  
Ahmed Jasim M Al-Karawi ◽  
Zyad Hussein J Al-Qaisi ◽  
Samer Ghanim Majeed
Keyword(s):  
Differential Scanning Calorimetry ◽  
Liquid Crystal ◽  
Liquid Crystalline ◽  
Polarized Light ◽  
Luminescent Properties ◽  
Scanning Calorimetry ◽  
Crystalline Materials ◽  
X Ray ◽  
Step Procedure ◽  
Liquid Crystalline Materials

{1-[4-( n-Alkoxy)]-2-(4’-decyloxy)benzylidene}hydrazines ( n-alkoxy = O(CH2) nH, n = 1–9, 12, 16 or 18), an asymmetrical series of 1,2-disubstituted hydrazines, were prepared in a simple two-step procedure as a part of our continuing work in evaluating hydrophobic azine compounds as photoluminescent liquid crystalline materials. The compounds were characterized spectroscopically and their liquid crystalline behaviour and luminescent properties were evaluated using polarized light optical microscopy, differential scanning calorimetry and X-ray powder diffraction techniques. The studies revealed that all of these compounds are liquid crystalline materials exhibiting photoluminescent properties in the crystalline and liquid crystal states.

Evidence for room temperature mesomorphism in a mixed-valent diruthenium(II,III) quintapalmitoleate polymer

1998 ◽  
Vol 76 (11) ◽  
pp. 1520-1523
Author(s):  
Jennifer F Caplan ◽  
Christopher A Murphy ◽  
Susan Swansburg ◽  
Robert P Lemieux ◽  
T Stanley Cameron ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Liquid Crystal ◽  
Powder Diffraction ◽  
Strong Evidence ◽  
Room Temperature ◽  
Variable Temperature ◽  
Mixed Valence ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Crystal Transition

The synthesis of Ru2(μ-O2CR)4(μ´-O2CR) (1), R = -CH2(CH2)6CH=CH(CH2)5CH3, has been achieved and characterization using elemental analysis and FTIR and UV-Vis spectroscopies undertaken. Strong evidence for a hexagonal discotic mesophase has been found using differential scanning calorimetry, variable-temperature polarizing optical microscopy, and X-ray powder diffraction. A solid to liquid crystal transition was found upon heating at 128°C and the mesophase is found to persist to room temperature upon cooling from 150°C. This is the first report of room temperature mesomorphism in a mixed-valent metallomesogen. Key words: ruthenium carboxylate, liquid crystal, metallomesogen, mixed valence, polymer.

One-Step Synthesis of a Liquid Crystal TB4A at Room Temperature

2011 ◽  
Vol 181-182 ◽  
pp. 168-172
Author(s):  
Qing Lan Ma ◽  
Bao Gai Zhai ◽  
Yuan Ming Huang
Keyword(s):  
Nuclear Magnetic Resonance ◽  
Differential Scanning Calorimetry ◽  
Fourier Transform ◽  
Liquid Crystal ◽  
Room Temperature ◽  
Scanning Calorimetry ◽  
Smectic A ◽  
Smectic C ◽  
Infrared Spectrometer ◽  
One Step

A rod-like liquid crystal (LC) N,N-(terephthalylidene) bis (4-n-butylaniline) (TB4A) was synthesized by one step at room temperature. The synthesized TB4A were investigated with nuclear magnetic resonance, fourier transform infrared spectrometer and ultraviolet-visible spectrophotometry, differential scanning calorimetry and polarizing optical microscopy. Our results demonstrated that the TB4A can form nematic, smectic A, smectic C, smectic F and smectic G LC phases.

scholarly journals Synthesis, characterization and structure-property relationships of 1,3-bis(5-substituted-1,3,4-oxadiazol-2-yl)benzenes

2019 ◽  
Author(s):  
Afef Mabrouki ◽  
Malek Fouzai ◽  
Armand Soldera ◽  
Abdelkader Kriaa ◽  
ahmed hedhli
Keyword(s):  
Differential Scanning Calorimetry ◽  
Liquid Crystal ◽  
Dipole Moments ◽  
Structure Property ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Rigid Core ◽  
X Ray ◽  
Structure Property Relationships ◽  
Crystal Properties

Two series containing 1,3-bis(1,3,4-oxadiazol-2-yl)benzene as a rigid core (RC) and alkyl or perfluoroalkyl as terminal chains were synthesized and characterized. Liquid Crystal properties of the synthesized compounds have been investigated by Polarizing Optical Microscopy, Differential Scanning Calorimetry and X-ray Diffraction techniques. Conformation effects of the synthesized products on the dipole moments were also investigated.

Synthesis and Properties of Novel Thiophene-Based Liquid Crystalline Conducting Polymers

2017 ◽  
Vol 25 (9) ◽  
pp. 669-676 ◽  
Author(s):  
Danesh Roudini
Keyword(s):  
Magnetic Field ◽  
Differential Scanning Calorimetry ◽  
Liquid Crystal ◽  
Optical Microscopy ◽  
Electronic Properties ◽  
Liquid Crystalline ◽  
Side Chain ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Crystal Properties

Side-chain liquid crystalline polythiophenes were synthesised and the effects of the mesogenic units on the structure and electronic properties of the polymers were studied. The liquid crystal properties of the polymer films were studied using polarised hot-stage optical microscopy and differential scanning calorimetry, and X-ray diffractometry was used to investigate the effect of a magnetic field on the monomers and polymers.

A Study of the Interactions Between Oligoamidephosphate (OAPh) and Curatives in a Sulphenamide-Accelerated Sulphur Vulcanizing System

1999 ◽  
Vol 19 (2) ◽  
pp. 95-108 ◽  
Author(s):  
Todorka G. Vladkova ◽  
Alexander Chr. Alaminov ◽  
Milka G. Pankova
Keyword(s):  
Differential Scanning Calorimetry ◽  
Zinc Oxide ◽  
Ir Spectroscopy ◽  
Room Temperature ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Sulphur Vulcanization

Abstract The possible interactions between oligoamidephosphate (OAPli) and the curatives of a sulphenamide-accelerated sulphur vulcanizing system were studied by differential scanning calorimetry, IR-spectroscopy, and X-ray analysis. The interactions in double mixtures were between OAPh and zinc oxide (ZnO) and OAPh and sulphur. The OAPh/ZnO interaction that starts at room temperature seems to be the key for understanding the peculiarities of sulphenamide-accelerated sulphur vulcanization in the presence of OAPh.

Research on compatibility and surface of high impact bio-based polyamide

2021 ◽  
pp. 095400832110055
Author(s):  
Yang Wang ◽  
Yuhui Zhang ◽  
Yuhan Xu ◽  
Xiucai Liu ◽  
Weihong Guo
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Crystallization Behavior ◽  
High Impact ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Scanning Electron

The super-tough bio-based nylon was prepared by melt extrusion. In order to improve the compatibility between bio-based nylon and elastomer, the elastomer POE was grafted with maleic anhydride. Scanning Electron Microscopy (SEM) and Thermogravimetric Analysis (TGA) were used to study the compatibility and micro-distribution between super-tough bio-based nylon and toughened elastomers. The results of mechanical strength experiments show that the 20% content of POE-g-MAH has the best toughening effect. After toughening, the toughness of the super-tough nylon was significantly improved. The notched impact strength was 88 kJ/m2 increasing by 1700%, which was in line with the industrial super-tough nylon. X-ray Diffraction (XRD) and Differential Scanning Calorimetry (DSC) were used to study the crystallization behavior of bio-based PA56, and the effect of bio-based PA56 with high crystallinity on mechanical properties was analyzed from the microstructure.

The Sputter Deposition of Metal Multilayers

1987 ◽  
Vol 103 ◽  
Author(s):  
R. E. Somekh ◽  
R. J. Highmore ◽  
K. Page ◽  
R. J. Home ◽  
Z. H. Barber
Keyword(s):  
Differential Scanning Calorimetry ◽  
Sputter Deposition ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Monotonic Increase ◽  
Preliminary Work ◽  
Sputtering Pressure

ABSTRACTWe describe the strategy that we are using to make precision metal multilayers. Differential scanning calorimetry has been used with the Ni/Zr system to study the abruptness of the interface as a function of the sputtering pressure. For 10nm period multilayers there is a monotonic increase in the width of the interface with increasing sputtering pressure. W/Si multilayers have been studied as a function of both the sputtering pressure and the relative thicknesses of tungsten and silicon. At reasonably low sputtering pressures a well textured (110) tungsten X-ray peak is seen which is compatible with the expected thickness of the tungsten layers.Finally, we report some preliminary work on sputtering from tungsten and silicon targets which are at different distances from the substrate so that the degrees of bombardment on the growing layers of the film can be independently varied.

Sign in / Sign up

Export Citation Format

Share Document