X-Ray Measurements of Cement Hydration Products

1993 ◽  
Vol 133-136 ◽  
pp. 645-650
Author(s):  
H.W. Meyer ◽  
Herbert Pöllmann ◽  
H.-J. Kuzel
Keyword(s):  
Cement Hydration ◽  
Hydration Products ◽  
X Ray

scholarly journals Enhancing carbonation and chloride resistance of autoclaved concrete by incorporating nano-CaCO3

2020 ◽  
Vol 9 (1) ◽  
pp. 998-1008
Author(s):  
Guo Li ◽  
Zheng Zhuang ◽  
Yajun Lv ◽  
Kejin Wang ◽  
David Hui
Keyword(s):  
Cement Hydration ◽  
Mercury Intrusion Porosimetry ◽  
Hardened Concrete ◽  
Optimal Dosage ◽  
Hydration Products ◽  
X Ray Diffraction ◽  
Carbonation Depth ◽  
X Ray ◽  
Chloride Resistance

AbstractThree nano-CaCO3 (NC) replacement levels of 1, 2, and 3% (by weight of cement) were utilized in autoclaved concrete. The accelerated carbonation depth and Coulomb electric fluxes of the hardened concrete were tested periodically at the ages of 28, 90, 180, and 300 days. In addition, X-ray diffraction, thermogravimetry, and mercury intrusion porosimetry were also performed to study changes in the hydration products of cement and microscopic pore structure of concrete under autoclave curing. Results indicated that a suitable level of NC replacement exerts filling and accelerating effects, promotes the generation of cement hydration products, reduces porosity, and refines the micropores of autoclaved concrete. These effects substantially enhanced the carbonation and chloride resistance of the autoclaved concrete and endowed the material with resistances approaching or exceeding that of standard cured concrete. Among the three NC replacement ratios, the 3% NC replacement was the optimal dosage for improving the long-term carbonation and chloride resistance of concrete.

Comparison of FT-IR, Thermal Analysis and XRD for Determination of Products of Cement Hydration

2010 ◽  
Vol 168-170 ◽  
pp. 518-522 ◽  
Author(s):  
Zhi Hua Ou ◽  
Bao Guo Ma ◽  
Shou Wei Jian
Keyword(s):  
Thermal Analysis ◽  
Fourier Transform ◽  
Cement Hydration ◽  
Hydration Products ◽  
X Ray Diffraction ◽  
Cement Pastes ◽  
X Ray ◽  
Degree Of Hydration ◽  
Ft Ir

Fourier Transform Infrared Spectroscopy (FT-IR), thermal analysis and X-Ray Diffraction (XRD) are commonly performed to study the hydration products in cement pastes. The three methods were compared in this frame to detect products of cement hydration at different ages, especially at early ages (before 24h ages). The results indicate from the present experiment that CH (Calcium hydroxide) can be detected by three methods at all ages; C-S-H can be distinguished by FT-IR at all ages; ettringite may be detected by FT-IR before 24h ages and by XRD at all ages; and monosulphate can be detected by FT-IR before 24h ages. The process of cement hydration, characterized by formation and development of some hydration products, can be clearly observed by three methods. FT-IR is suggested for detecting the major hydration products before 24h ages, FT-IR and XRD are suggested for detecting the major hydration products after 24h ages, and thermal analysis is suggested for analyzing the degree of hydration quantitatively.

scholarly journals Effect of Ultrafine Additives on the Morphology of Cement Hydration Products

Crystals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1002
Author(s):  
Grigory Yakovlev ◽  
Rostislav Drochytka ◽  
Gintautas Skripkiunas ◽  
Larisa Urkhanova ◽  
Irina Polyanskikh ◽  
...  
Keyword(s):  
Silica Fume ◽  
Cement Paste ◽  
Cement Hydration ◽  
Chemical Reactivity ◽  
Xrd Analysis ◽  
Hardened Cement ◽  
Hydration Products ◽  
Hardened Cement Paste ◽  
X Ray ◽  
Strong Adhesion

The present research is focused on the investigation of the influence of ultrafine additives on the structure formation of hardened cement paste and the establishment of the mechanisms of the morphological transformations, which determine the properties of hydrated products. In the course of the research, the modification of ordinary Portland cement was performed by the suspension of multi-walled carbon nanotubes (MWCNTs), carbon black (CB) paste, and silica fume (SF). Scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) microanalysis, X-ray diffraction (XRD) analysis, thermal analysis, and Fourier-transform infrared (FTIR) spectroscopy were used to study cement hydration products. The morphology of hardened cement paste depends on the chemical reactivity of additives, their geometry, and their genesis. The action mechanism of the inert carbon-based additives and pozzolanic silica fume were considered. The cement hydration products formed in the process of modification by both types of ultrafine additives are described. In the case of the modification of cement paste by inert MWCNTs and CB paste, the formation of cement hydration products on their surface without strong adhesion was observed, whereas in the case of the addition of SF separately and together with MWCNTs, the strong adhesion of additives and cement hydration products was noted.

Identification of Composite Cement Hydration Products by Means of X-Ray Diffraction

2001 ◽  
Vol 136 (3-4) ◽  
pp. 181-183 ◽  
Author(s):  
Nikos A. Voglis ◽  
Glykeria T. Kakali ◽  
Sotiris G. Tsivilis
Keyword(s):  
Cement Hydration ◽  
Hydration Products ◽  
X Ray Diffraction ◽  
X Ray ◽  
Composite Cement

Synthetic ‘deweylite’

1971 ◽  
Vol 38 (294) ◽  
pp. 225-234 ◽  
Author(s):  
K. Speakman ◽  
A. J. Majumdar
Keyword(s):  
Cement Hydration ◽  
Magnesium Silicate ◽  
Silica Gels ◽  
Hydration Products ◽  
Silicate Mineral ◽  
X Ray ◽  
Synthetic Materials ◽  
Infra Red ◽  
Magnesium Silicates ◽  
Hydrated Magnesium Silicate

SummaryMaterials similar to the natural hydrated magnesium silicate mineral deweylite have been synthesized hydrothermally under low-temperature-low-pressure conditions from magnesia-silica gels. Optical, X-ray, infra-red, and DTA examinations have shown that both the natural and synthetic materials are mixtures of badly crystallized talc and badly crystallized serpentine. The mineral is thought to be a coarse mixture of these two components while the synthetic products are intimately interlayered. These materials are believed to be closely related to the hydrated magnesium silicates detected in high-magnesia cement hydration products.

scholarly journals Effect of Alkaline Salts on Calcium Sulfoaluminate Cement Hydration

Molecules ◽  
2021 ◽  
Vol 26 (7) ◽  
pp. 1938
Author(s):  
Luís Urbano D. Tambara Júnior ◽  
Janaíde C. Rocha ◽  
Malik Cheriaf ◽  
Pilar Padilla-Encinas ◽  
Ana Fernández-Jiménez ◽  
...  
Keyword(s):  
Cement Hydration ◽  
Hydration Products ◽  
Reaction Products ◽  
X Ray Diffraction ◽  
Calcium Sulfoaluminate Cement ◽  
Hydration Kinetics ◽  
Sodium Salts ◽  
X Ray ◽  
Calcium Sulfoaluminate ◽  
Ettringite Formation

This work analyzes the effect of the presence of 5 wt.% of solid sodium salts (Na2SO4, Na2CO3, and Na2SiO3) on calcium sulfoaluminate cement (CSA) hydration, addresses hydration kinetics; 2-, 28-, and 90-d mechanical strength, and reaction product microstructure (with X-ray diffraction (XRD), and Fourier transform infrared spectroscopy, (FTIR). The findings show that the anions affect primarily the reactions involved. Ettringite and AH3, are the majority hydration products, while monosulfates are absent in all of the samples. All three salts hasten CSA hydration and raise the amount of ettringite formed. Na2SO4 induces cracking in the ≥28-d pastes due to post-hardening gypsum and ettringite formation from the excess SO42– present. Anhydrite dissolves more rapidly in the presence of Na2CO3, prompting carbonation. Na2SiO3 raises compressive strength and exhibits strätlingite as one of its reaction products.

scholarly journals Effect of C-S-H Nucleating Agent on Cement Hydration

2021 ◽  
Vol 11 (14) ◽  
pp. 6638
Author(s):  
Wenhao Zhao ◽  
Xuping Ji ◽  
Yaqing Jiang ◽  
Tinghong Pan
Keyword(s):  
Fractal Dimension ◽  
Cement Hydration ◽  
Nucleating Agent ◽  
Crystal Nucleation ◽  
Enhancement Effect ◽  
Hydration Products ◽  
Hydration Degree ◽  
Hydration Kinetics ◽  
Cement Mortars ◽  
Early Strength

This work aims to study the effect of a nucleating agent on cement hydration. Firstly, the C-S-H crystal nucleation early strength agent (CNA) is prepared. Then, the effects of CNA on cement hydration mechanism, early strength enhancement effect, C-S-H content, 28-days hydration degree and 28-days fractal dimension of hydration products are studied by hydration kinetics calculation, resistivity test, BET specific surface area test and quantitative analysis of backscattered electron (BSE) images, respectively. The results show that CNA significantly improves the hydration degree of cement mixture, which is better than triethanolamine (TEA). CNA shortens the beginning time of the induction period by 49.3 min and the end time of the cement hydration acceleration period by 105.1 min than the blank sample. CNA increases the fractal dimension of hydration products, while TEA decreases the fractal dimension. CNA significantly improves the early strength of cement mortars; the 1-day and 3-days strength of cement mortars with CNA are more than the 3-days and 7-days strength of the blank sample. These results will provide a reference for the practical application of the C-S-H nucleating agent.

Effect of Heavy Metals and Leaching Toxicity of Magnesium Potassium Phosphate Cement

2011 ◽  
Vol 117-119 ◽  
pp. 1080-1083 ◽  
Author(s):  
Bao Guo Ma ◽  
Jing Ran Wang ◽  
Xiang Guo Li
Keyword(s):  
Heavy Metals ◽  
Cement Hydration ◽  
Potassium Phosphate ◽  
National Standard ◽  
Magnesium Phosphate ◽  
Toxicity Tests ◽  
Hydration Products ◽  
Obvious Effect ◽  
Leaching Toxicity ◽  
Magnesium Potassium Phosphate Cement

Solidification / stabilization (S/S) is a popular method for treating solid wastes containing heavy metals. In recent years, it shows positive results of magnesium potassium phosphate cement as stabilizing agent. In the work, the influence of heavy metal Cu、Zn and Pb on magnesium phosphate cement and the leaching behavior of magnesium phosphate cement were studied. Two proportions of cements were employed with hard burned magnesia and potassium phosphate. The hydration products were analyzed by XRD showing that: Cu、Zn and Pb would not take on obvious effect during magnesium phosphate cement hydration process. Leaching toxicity tests showed that: Cu、Zn and Pb were immobilized within cement hydration products through physical fixation, adsorption mechanisms, and the results were far lower than that of the National Standard in China.

Characterisation of concrete, mortar and calcium silicate hydrated phases (CSH) and thorium retention analyses by ion beam techniques.

2012 ◽  
Vol 1475 ◽  
Author(s):  
Ursula Alonso ◽  
Tiziana Missana ◽  
Miguel Garcia-Gutierrez ◽  
Henar Rojo ◽  
Alessandro Patelli ◽  
...  
Keyword(s):  
Calcium Silicate ◽  
Cement Hydration ◽  
Ion Beam ◽  
X Ray ◽  
Tetravalent Actinide ◽  
Radioactive Waste Repositories ◽  
Edx Analyses ◽  
Waste Repositories ◽  
Beam Technique

ABSTRACTCement-based materials, like concrete and mortar, are widely used in radioactive waste repositories. A deep characterization of these heterogeneous materials, and of their main phases, is necessary to evaluate their capability of retaining critical radionuclides (RN).In this study, the ion beam technique micro- Particle Induced X- Ray Emission (μPIXE) is used to characterize the concrete and mortar used in the Spanish low level waste repository. Two calcium silicate hydrate (CSH) phases with different Ca/Si ratio are also studied, because they are known to be amongst the most relevant phases, formed upon cement hydration, that retain RN. The retention of thorium on the above mention materials, as relevant tetravalent actinide, is also analyzed. Results are compared with Scanning Electron Microscopy- Energy Dispersive X-Ray Spectroscopy (SEM-EDX) analyses.

Sign in / Sign up

Export Citation Format

Share Document