Simultaneous Incorporation of 5-Fluorouracil and Leucovorin into Chitosan Nanoparticle as Drug Carrier and Its Characterization

2010 ◽  
Vol 654-656 ◽  
pp. 2265-2268
Author(s):  
Pu Wang Li ◽  
Yi Chao Wang ◽  
Zheng Peng ◽  
Ling Xue Kong
Keyword(s):  
Particle Size ◽  
Strong Interaction ◽  
Encapsulation Efficiency ◽  
Drug Carrier ◽  
Drug Loading ◽  
Anti Cancer ◽  
Chitosan Nanoparticle ◽  
Combined Drugs ◽  
Drug Encapsulation Efficiency ◽  
Interaction Between Drugs

A combined drug loaded system containing two most common anti-cancer drugs 5-fluorouracil (5-FU) and leucovorin (LV) was designed and prepared by ion crosslinking technology. The resulted nanoparticles are spherical in shape, and the particle size becomes larger when drug combination are loaded. Efficient drug encapsulation efficiency (EE) and drug loading (LC) are obtained due to the strong interaction between drugs and polymer. The combined drugs are distributed in the particles in amorpholous state which are demonstrated by the XRD results.

Stereocomplexation Assisted Assembly of Poly(γ-glutamic Acid)-graft-polylactide Nano-micelles and Their Efficacy as Anticancer Drug Carrier

2018 ◽  
Vol 18 (2) ◽  
pp. 302-311
Author(s):  
Shulin Dai ◽  
Yucheng Feng ◽  
Shuyi Li ◽  
Yuxiao Chen ◽  
Meiqing Liu ◽  
...  
Keyword(s):  
Glutamic Acid ◽  
Drug Carrier ◽  
Drug Loading ◽  
Drug Carriers ◽  
Cancer Drug ◽  
Drug Release Profile ◽  
Sustained Drug Release ◽  
Anti Cancer ◽  
Physical Interactions

Background: Micelles as drug carriers are characterized by their inherent instability due to the weak physical interactions that facilitate the self-assembly of amphiphilic block copolymers. As one of the strong physical interactions, the stereocomplexation between the equal molar of enantiomeric polylactides, i.e., the poly(L-lactide) (PLLA) and poly(D-lactide) (PDLA), may be harnessed to obtain micelles with enhanced stability and drug loading capacity and consequent sustained release. </P><P> Aims/Methods: In this paper, stereocomplexed micelles gama-PGA-g-PLA micelles) were fabricated from the stereocomplexation between poly(gama-glutamic acid)-graft-PLLA gama-PGA-g-PLA) and poly(gamaglutamic acid)-graft-PDLA gama-PGA-g-PLA). These stereocomplexed micelles exhibited a lower CMC than the corresponding enantiomeric micelles. Result: Furthermore, they showed higher drug loading content and drug loading efficiency in addition to more sustained drug release profile in vitro. In vivo imaging confirmed that the DiR-encapsulated stereocomplexed gama-PGA-g-PLA micelles can deliver anti-cancer drug to tumors with enhanced tissue penetration. Overall, gama-PGA-g-PLA micelles exhibited greater anti-cancer effects as compared with the free drug and the stereocomplexation may be a promising strategy for fabrication of anti-cancer drug carriers with significantly enhanced efficacy.

scholarly journals Sodium Alginate Nanoparticles of Isoniazid: Preparation and Evaluation

2019 ◽  
Vol 11 (06) ◽  
Author(s):  
Sumit Kumar ◽  
Dinesh Chandra Bhatt
Keyword(s):  
Particle Size ◽  
Sodium Alginate ◽  
Encapsulation Efficiency ◽  
Drug Loading ◽  
Average Particle Size ◽  
Average Particle ◽  
In Vitro Drug Release ◽  
Ionotropic Gelation ◽  
Preparation And Evaluation

Fabrication and evaluation of the Isoniazid loaded sodium alginate nanoparticles (NPs) was main objective of current investigation. These NPs were engineered using ionotropic gelation technique. The NPs fabricated, were evaluated for average particle size, encapsulation efficiency, drug loading, and FTIR spectroscopy along with in vitro drug release. The particle size, drug loading and encapsulation efficiency of fabricated nanoparticles were ranging from 230.7 to 532.1 nm, 5.88% to 11.37% and 30.29% to 59.70% respectively. Amongst all batches studied formulation F-8 showed the best sustained release of drug at the end of 24 hours.

scholarly journals Formulation of Solid Lipid Nanoparticles of Cilnidipine for the Treatment of Hypertension

2019 ◽  
Vol 9 (3) ◽  
pp. 212-221 ◽  
Author(s):  
Aparna Bhalerao ◽  
Pankaj Prakash Chaudhari
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
Encapsulation Efficiency ◽  
Drug Loading ◽  
Lipid Nanoparticles ◽  
Water Soluble ◽  
Solid Lipid Nanoparticle ◽  
Solid Lipid ◽  
Lipid Nanoparticle

Cilinidipine is a fourth generation N and L-type calcium channel antagonists used alone or in combination with another drug to treat hypertension. Cilnidipine is poorly water -soluble, BCS class II drug with 6 to 30 percent oral bioavailability due to first pass metabolism. So to protect the drug from degradation and improve its dissolution, solid lipid nanoparticles were prepared. Glyceryl monostearate was selected as lipid while span 20: tween 20 were selected as surfactant blends. The formulations were evaluated for various parameters, as percent transmittance, drug content, percent encapsulation efficiency; percent drug loading, In vitro drug release and particle size. Optimized formulation was lyophilized using lactose as a cryo-protectant. The lyophilized formulation was evaluated for micromeritic properties, particle size and in vitro dissolution. It was further evaluated for DSC, XRD, and SEM. Percent encapsulation efficiency and percent drug loading of optimized formulation (F3) were 78.66percent and 9.44percent respectively. The particle size of F3 formulation without drug was 204 nm and with the drug was 214 nm. The particle size of the reconstituted SLN was 219 nm. In DSC study, no obvious peaks for cilnidipine were found in the SLN of cilnidipine indicated that the cilnidipine must be present in a molecularly dissolved state in SLN. In X-ray diffractometry absence of peaks representing crystals of cilnidipine in SLN indicated that the drug was in an amorphous or disordered crystalline phase in the lipid matrix. Thus, solid lipid nanoparticle formulation is a promising way to enhance the dissolution rate of cilnidipine. Keywords: Cilnidipine, Solid Lipid Nanoparticle, Hypertension

scholarly journals DRUMSTICK MUCILAGE MICROSPHERES FOR CONTROLLED RELEASE OF LAMIVUDINE: DESIGN, OPTIMIZATION AND IN VITRO EVALUATION

2019 ◽  
pp. 60-68
Author(s):  
Santosh G Gada ◽  
ANANDKUMAR Y. ◽  
C. MALLIKARJUN SETTY
Keyword(s):  
Particle Size ◽  
Controlled Release ◽  
Drug Release ◽  
Encapsulation Efficiency ◽  
Drug Encapsulation ◽  
Two Factors ◽  
Desirability Approach ◽  
Predicted Values ◽  
Drug Encapsulation Efficiency

Objective: The objective of this study was to design and evaluate controlled release mucoadhesive microspheres of lamivudine using mucoadhesive polymers and mucilage. Methods: Mucoadhesive microspheres of lamivudine were formulated by ionic gelation method. The response surface methodology was adapted for optimization of formulation using central composite design (CCD) for two factors at three levels each was employed to study the effect of independent variables, Sodium alginate-drumstick mucilage (X1) and calcium chloride (CaCl2) concentration (X2) on dependent variables, namely drug encapsulation efficiency (DEE) and particle size (PS). Optimized drumstick mucilage mucoadhesive microspheres of lamivudine were obtained by using numerical optimization of desirability approach. The observed microspheres were coincided well with the predicted values by the experimental design. Results: The microspheres formed were spherical in shape, and Particle size (PS) ranged between 681.63-941.57μm. Drug encapsulation efficiency (DEE) was ranged between 69.63-94.56 %. The drug release for an optimized formulation was 96.58 %. The mechanism of drug release from microspheres followed Korsemeyer’s-Peppas and exponential ‘n’ value was greater than 0.45, indicating the drug release was non-fickian i.e., swelling followed by erosion mechanism. Conclusion: This work suggests that mucoadhesive microspheres, an effective drug delivery system for lamivudine, can be prepared using drumstick mucilage in improving the bioavailability of the drug.

scholarly journals Preparation and pharmacokinetics of genistein MePEG-PLGA copolymer micelles

2019 ◽  
Author(s):  
Mina Swartz ◽  
John Smith
Keyword(s):  
Particle Size ◽  
Encapsulation Efficiency ◽  
Drug Loading ◽  
Weibull Model ◽  
Pharmacokinetic Parameters ◽  
Release Behavior ◽  
Concentration Data ◽  
Tail Vein ◽  
Initial Stability ◽  
Copolymer Micelles

AbstractIn this report, we demonstrated a novel technique to prepare genistein (GEN) MePEG-PLGA copolymer micelles. Initial stability and pharmacokinetic behavior in rats after intravenous administration were investigated. The micelles were prepared by modified self-emulsifying solvent evaporation method. The morphology, encapsulation efficiency, drug loading, particle size and Zeta potential were investigated. The release behavior was investigated by dynamic membrane dialysis technique. The micelles were stored in a refrigerator at 4 °C, and samples were taken after 1 d, 10 d, 1 month, 3 months, and 6 months, and the encapsulation efficiency and drug loading were examined. The GEN micelles were injected into the tail vein of healthy rats. The blood concentration of GEN in rats was determined by HPLC. The plasma concentration data was processed by DAS 2.0 software. The main pharmacokinetic parameters were statistically analyzed by SPSS 17.0 software. Results The encapsulation efficiency of the prepared micelles was (84.43+/-2.93) %, the drug loading was (2.63+/-0.91) %, and the particle size was (63.75+/-4.12) nm. The release behavior of GEN micelles was in line with the Weibull model. The 6-month leakage rate of GEN micelles was 2.45%, and the drug loading decreased by 0.18%. The main pharmacokinetic parameters AUC0-t after GEN micelles and GEN emulsion 40 mg·kg-1 were injected into the tail vein of rats. They were (99.46+/- 4.77) mg · L-1 ·h and (57.51+/-1.37) mg·L-1 ·h, and t1/2 were (7.48+/-1.15)h and (4.95+/- 1.15)h, respectively, and Cmax was (16.03+/-1.20) mg·L-1 and (16.73+/-1.10) mg·L-1, CL are (0.36+/-0.02) L·h-1 ·kg-1 and (0.67+/-0.02)L·h-1 ·kg-1.

Comprehensive Review on Graphene Oxide for Use in Drug Delivery System

2020 ◽  
Vol 27 (22) ◽  
pp. 3665-3685 ◽  
Author(s):  
Muhammad Daniyal ◽  
Bin Liu ◽  
Wei Wang
Keyword(s):  
Graphene Oxide ◽  
Surface Area ◽  
Biomedical Applications ◽  
Drug Transport ◽  
Drug Carrier ◽  
Drug Loading ◽  
Anti Cancer ◽  
Targeted Drug ◽  
Nano Graphene ◽  
High Drug Loading

Motivated by the accomplishment of carbon nanotubes (CNTs), graphene and graphene oxide (GO) has been widely investigated in the previous studies as an innovative medication nanocarrier for the loading of a variety of therapeutics as well as anti-cancer medications, poor dissolvable medications, antibiotics, antibodies, peptides, DNA, RNA and genes. Graphene provides the ultra-high drug-loading efficiency due to the wide surface area. Graphene and graphene oxide have been widely investigated for biomedical applications due to their exceptional qualities: twodimensional planar structure, wide surface area, chemical and mechanical constancy, sublime conductivity and excellent biocompatibility. Due to these unique qualities, GO applications provide advanced drug transports frameworks and transports of a broad range of therapeutics. In this review, we discussed the latest advances and improvements in the uses of graphene and GO for drug transport and nanomedicine. Initially, we have described what is graphene and graphene oxide. After that, we discussed the qualities of GO as a drug carrier, utilization of GO in drug transport applications, targeted drug transport, transport of anticancer medications, chemical control medicine releasee, co-transport of different medications, comparison of GO with CNTs, nano-graphene for drug transport and at last, we have discussed the graphene toxicity. Finally, we draw a conclusion of current expansion and the potential outlook for the future.

Liposomal Mediated Carriers of α Lipoic Acid for the Treatment of Acute Lung Injury: Preclinical Study in Rat Model

2020 ◽  
Vol 10 (1) ◽  
pp. 53-57
Author(s):  
Yu Cao ◽  
Yanling Chai ◽  
Xiaoqun Niu ◽  
Bing Hai ◽  
Xiaojie He ◽  
...  
Keyword(s):  
Thin Film ◽  
Particle Size ◽  
Pulmonary Fibrosis ◽  
Lung Injury ◽  
Lipoic Acid ◽  
Encapsulation Efficiency ◽  
Drug Loading ◽  
Preclinical Study ◽  
Liposomal Formulation ◽  
Experimental Animals

The present investigation deals with formulation of lipoic acid as liposomal formulation and to evaluate its efficacy in Lung injury (Pulmonary Fibrosis). The liposomal formulation of Lipoic acid (LA-liposomes) was successfully prepared by thin film hydration method. Such prepared liposomes were characterized for particle size, encapsulation efficiency, drug loading etc. characteristic. An Pulmonary fibrosis was induced using Bleomycin experimental animals rats. The effect of LA liposomal formulation on pulmonary fibrosis was observed. The histopathological finding confirms the efficiency of formulation in attenuation of pulmonary fibrosis.

scholarly journals Casein Micelles as Nanocarriers for Benzydamine Delivery

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4357
Author(s):  
Nikolay Zahariev ◽  
Maria Marudova ◽  
Sophia Milenkova ◽  
Yordanka Uzunova ◽  
Bissera Pilicheva
Keyword(s):  
Particle Size ◽  
Encapsulation Efficiency ◽  
Drug Loading ◽  
Average Particle Size ◽  
Crosslinking Agent ◽  
Morphological Characteristics ◽  
Average Particle ◽  
Scanning Calorimetry ◽  
Casein Micelles ◽  
Fourier Transformed Infrared Spectroscopy

The aim of the present work was to optimize the process parameters of the nano spray drying technique for the formulation of benzydamine-loaded casein nanoparticles and to investigate the effect of some process variables on the structural and morphological characteristics and release behavior. The obtained particles were characterized in terms of particle size and size distribution, surface morphology, production yield and encapsulation efficiency, drug-polymer compatibility, etc., using dynamic light scattering, scanning electron microscopy, differential scanning calorimetry, and Fourier transformed infrared spectroscopy. Production yields of the blank nanoparticles were significantly influenced by the concentration of both casein and the crosslinking agent. The formulated drug-loaded nanoparticles had an average particle size of 135.9 nm to 994.2 nm. Drug loading varied from 16.02% to 57.41% and the encapsulation efficiency was in the range 34.61% to 78.82%. Our study has demonstrated that all the investigated parameters depended greatly on the polymer/drug ratio and the drug release study confirmed the feasibility of the developed nanocarriers for prolonged delivery of benzydamine.

Preparation of Simvastatin Loaded Nanostructured Lipid Carriers and Its Therapeutic Effect on Patients with Severe Acute Lung Injury

2021 ◽  
Vol 21 (2) ◽  
pp. 1184-1189
Author(s):  
Xijiao Yan ◽  
Wenkai Zhang ◽  
Xiangli Cheng ◽  
Linyi Hou
Keyword(s):  
Particle Size ◽  
Acute Lung Injury ◽  
Lung Injury ◽  
Encapsulation Efficiency ◽  
Drug Loading ◽  
Treated Group ◽  
Nanostructured Lipid Carriers ◽  
Average Particle ◽  
Inflammatory Factor ◽  
Group Model

Acute lung injury (ALI) is a critical illness but have not effective therapeutic modalities currently where recent studies have revealed anti-inflammatory pleiotropic effects and plaque stabilizing effects of statins so the purpose of this work is preparation of simvastatin loaded nanostructured lipid carriers (simvastatin-NLCs) and investigation of its efficacy in lung injury mice. The simvastatin-NLCs was prepared by thermal melting-low temperature curing method and the quality evaluation was performed with particle size distribution, encapsulation efficiency, and drug loading. Sixty C57BL/6 mice were divided into three experimental groups: blank group model group and simvastatin treated group. Simvastatin was administered intraperitoneally immediately after the LPS injection in animals of the treated group at a dose of 20 mg/kg/day. Lung injury degree and the protective effects of simvastatin against LPS-induced lung injury were assessed at the time-points of 24, 48, and 72 h post injection, and the in vivo efficacy of simvastatin-NLCs on mice was investigated. The average particle size of simvastatin-NLCs was (102.1±42.2) nm, the encapsulation efficiency was (94.6±2.5)%, and the drug loading was (5.78±0.57)%. After 24 hours of administration, the data shows that simvastatin-NLCs inhibit the levels of IL-6 and TNF-α inflammatory factor in the lungs of mice.

scholarly journals DESIGN, DEVELOPMENT AND CHARACTERIZATION OF PACLITAXEL LOADED SOLID LIPID NANOPARTICLES AS A COLLOIDAL DRUG CARRIER

2019 ◽  
pp. 333-340
Author(s):  
INDRAYANI D. RAUT ◽  
AREHALLI S. MANJAPPA ◽  
SHRINIVAS K. MOHITE ◽  
RAJENDRA C. DOIJAD
Keyword(s):  
Particle Size ◽  
Sustained Release ◽  
Stearic Acid ◽  
Solid Lipid Nanoparticles ◽  
Drug Carrier ◽  
Drug Loading ◽  
Spherical Shape ◽  
Lipid Nanoparticles ◽  
Solid Lipid ◽  
Soya Lecithin

Objective: This study was aimed to design and characterize Paclitaxel-loaded Solid Lipid Nanoparticles (SLNs) to achieve site specificity,reduce toxicity and sustained release pattern. Methods: Paclitaxel-loaded solid lipid nanoparticles were fabricated by microemulsion followed by probe sonication technique using stearic acid as lipid and stabilized of the mixture of surfactants. In this study, 32 full factorial design was employed for optimizing the concentration of lipid as stearic acid and surfactant (soya lecithin) for the nanoparticles. The optimization was done by studying the dependent variable of particle size and % entrapment efficiency. Results: The results showed that the paclitaxel-loaded solid lipid nanoparticles prepared with the concentration of 33.31 % stearic acid and 500 mg of soya lecithin were optimum characteristic than other formulations. They showed the average particles size 149±4.10 nm and PDI 250±2.04. The zeta potential, % EE and % drug loading capacity was found to be respectively-29.7, 93.38±1.90 and 0.81±0.01. The optimized batch of Paclitaxel SLNs exhibited spherical shape with smooth surface analyzed by Transmission Electron Microscopy. In vitro study showed sustained release profile and was found to follow Higuchi Kinetics Equation. Conclusion: The SLNs of paclitaxel m et al. l the requirements of a colloidal drug delivery system. They had a particle size in nanosize; their size distribution was narrow and all the particles were in a spherical shape.

Sign in / Sign up

Export Citation Format

Share Document