Phase Transformation of Powdered Material by Using Metal Jet

2012 ◽  
Vol 706-709 ◽  
pp. 741-744 ◽  
Author(s):  
Akio Kira ◽  
Ryuichi Tomoshige ◽  
Kazuyuki Hokamoto ◽  
Masahiro Fujita
Keyword(s):  
Phase Transformation ◽  
Powdered Material ◽  
Scanning Transmission Electron Microscope ◽  
Ultrahigh Pressure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Metal Jet ◽  
Very High

The various techniques of phase transformation of the material have been proposed by many researchers. We have developed several devices to generate the ultrahigh pressure by using high explosive. One of them uses metal jets. It is expected that the ultrahigh pressure occurs by the head-on collision between metal jets, because the velocity of the metal jet is very high. By mixing a powdered material with metal jets, the pressure of the material becomes high. The purpose of this study is to transform the phase of the powdered material by using this high pressure. The powders of the graphite and hBN were applied. The synthesis to the diamond and cBN was confirmed by X-ray diffraction (XRD). In this paper, the mechanism of the generation of the ultrahigh pressure is explained and the results of the observation of the powder by using scanning transmission electron microscope (STEM) are reported.

Generation of Ultrahigh Pressure and Application of Ultrahigh Pressure to Formation of Diamond from Graphite Powder

2011 ◽  
Vol 673 ◽  
pp. 275-278 ◽  
Author(s):  
Akio Kira ◽  
Yoshiaki Tsutsumi ◽  
Akio Tasaka ◽  
Ryuichi Tomoshige ◽  
Kazuyuki Hokamoto ◽  
...  
Keyword(s):  
Graphite Powder ◽  
Powdered Material ◽  
Scanning Transmission Electron Microscope ◽  
Ultrahigh Pressure ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Metal Jet ◽  
Impulsive Pressure ◽  
Pressure Phase

The purpose of our research is to generate the ultrahigh pressure by using high explosive and to transform a phase of a material. The extremely high impulsive pressure generator that has been developed by us uses the head-on collision between metal jets. Because the velocity of the metal jet is very high, the ultrahigh pressure will generate. If a powdered material is mixed to metal jets, it is expected that the material is transformed to a high pressure phase by this ultrahigh pressure. A graphite powder was used to synthesize a diamond. The existence of the diamond was confirmed by X-ray diffraction (XRD). In this paper, the mechanism of the generation of the ultrahigh pressure is explained and the results of the observation of the powder by using scanning transmission electron microscope (STEM) are reported.

Analytical Microscopic Analysis of Precipitates in Hastelloy Alloy C-276

1981 ◽  
Vol 39 ◽  
pp. 280-281
Author(s):  
M. Raghavan ◽  
B. J. Berkowitz ◽  
J. C. Scanlon
Keyword(s):  
Microscopic Analysis ◽  
Scanning Transmission Electron Microscope ◽  
Second Phase ◽  
Precipitation Reaction ◽  
X Ray Diffraction ◽  
Corrosion Properties ◽  
X Ray ◽  
Transmission Electron ◽  
Second Phase Particles ◽  
Scanning Transmission

The present investigation was conducted to characterize the second phase particles in Hastelloy C-276 using an analytical Scanning Transmission Electron Microscope in order to understand their effect on the mechanical and Stress Corrosion properties of the alloy. Investigation in our 1aboratoryO) and previous published reports(2-4) have identified two types of precipitation reactions in this alloy. At temperatures in the range of 300-650°C, the alloy precipitates an ordered phase of the type Ni2(Cr, Mo)(1,2). This precipitation reaction is homogeneous with no preferential precipitation at the grain boundaries or twin boundaries. At temperatures above 650°C, several precipitate phases were observed to nucleate heterogeneously at boundaries and using X-ray diffraction techniques, the precipitates were previously identified as the μ, M6C and P phases(3-4). The present investigation was carried out to determine the composition of these second phase particles and this article describes the characterization of these precipitates using X-ray microanalysis and microdiffraction techniques.

Electrochemical Formation of Elemental Boron in LiCl–KCl–KBF4 at 723 K

2021 ◽  
Author(s):  
Yumi Katasho ◽  
Tetsuo Oishi
Keyword(s):  
Photoelectron Spectroscopy ◽  
Scanning Transmission Electron Microscope ◽  
X Ray Diffraction ◽  
Recycling Process ◽  
Reduction Behavior ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Elemental Boron ◽  
Transmission Electron ◽  
Scanning Transmission

Abstract The electrochemical reduction behavior of B(III) ions was investigated in LiCl–KCl–KBF4 at 723 K. The results of cyclic voltammetry using Mo, Ag, and Ni electrodes suggested the reduction of B(III) to B(0) at potentials of 1.5 V or at a more negative potential (vs. Li+/Li). Spherical electrodeposits were observed after potentiostatic electrolysis at 1.1–1.5 V. From the results of X-ray photoelectron spectroscopy, scanning transmission electron microscope/energy-dispersive X-ray spectroscopy (STEM/EDX), and selected area electron diffraction, it was concluded that the spherical electrodeposits obtained at 1.1 V were elemental amorphous boron. The purity of the products was 85 wt% boron, as determined by STEM/EDX analysis. The current efficiency of elemental B electrodeposition was 96.2% in this system. The formation of Ni2B at 1.1–1.9 V was indicated by X-ray diffraction, although it was not the main product. These results indicate that the presence of B(III) ions in a melt causes a fatal adverse effect on the recycling process of Nd–Fe–B magnets due to the reduction of B(III) ions. Further, the possibility of reducing the energy and cost of the elemental boron production process was discussed.

High-resolution x-ray imaging of small copper-rich precipitates in steels

1988 ◽  
Vol 46 ◽  
pp. 528-529
Author(s):  
J. R. Michael ◽  
K. A. Taylor
Keyword(s):  
Electron Microscopy ◽  
Thermomechanical Processing ◽  
Atom Probe ◽  
Ferrite Matrix ◽  
Scanning Transmission Electron Microscope ◽  
Probe Field ◽  
X Ray ◽  
Subsequent Transformation ◽  
Transmission Electron ◽  
Scanning Transmission

Although copper is considered an incidental or trace element in many commercial steels, some grades contain up to 1-2 wt.% Cu for precipitation strengthening. Previous electron microscopy and atom-probe/field-ion microscopy (AP/FIM) studies indicate that the precipitation of copper from ferrite proceeds with the formation of Cu-rich bcc zones and the subsequent transformation of these zones to fcc copper particles. However, the similarity between the atomic scattering amplitudes for iron and copper and the small misfit between between Cu-rich particles and the ferrite matrix preclude the detection of small (<5 nm) Cu-rich particles by conventional transmission electron microscopy; such particles have been imaged directly only by FIM. Here results are presented whereby the Cu Kα x-ray signal was used in a dedicated scanning transmission electron microscope (STEM) to image small Cu-rich particles in a steel. The capability to detect these small particles is expected to be helpful in understanding the behavior of copper in steels during thermomechanical processing and heat treatment.

The effect of small additions of Cu on precipitation in Al-Mg-Si alloys

1990 ◽  
Vol 48 (2) ◽  
pp. 442-443
Author(s):  
M. Tamizifar ◽  
G. Cliff ◽  
R.W. Devenish ◽  
G.W. Lorimer
Keyword(s):  
Electron Microscopy ◽  
Analytical Electron Microscopy ◽  
Scanning Transmission Electron Microscope ◽  
Argon Atmosphere ◽  
Age Hardening ◽  
X Ray ◽  
Transmission Electron ◽  
Heat Treated ◽  
Analytical Electron ◽  
Scanning Transmission

Small additions of copper, <1 wt%, have a pronounced effect on the ageing response of Al-Mg-Si alloys. The object of the present investigation was to study the effect of additions of copper up to 0.5 wt% on the ageing response of a series of Al-Mg-Si alloys and to use high resolution analytical electron microscopy to determine the composition of the age hardening precipitates.The composition of the alloys investigated is given in Table 1. The alloys were heat treated in an argon atmosphere for 30m, water quenched and immediately aged either at 180°C for 15 h or given a duplex treatment of 180°C for 15 h followed by 350°C for 2 h2. The double-ageing treatment was similar to that carried out by Dumolt et al. Analyses of the precipitation were carried out with a HB 501 Scanning Transmission Electron Microscope. X-ray peak integrals were converted into weight fractions using the ratio technique of Cliff and Lorimer.

High Spatial Resolution Compositional Analysis at Interfaces

1980 ◽  
Vol 38 ◽  
pp. 356-359
Author(s):  
John B. Vander Sande ◽  
Thomas F. Kelly ◽  
Douglas Imeson
Keyword(s):  
Electron Microscope ◽  
High Spatial Resolution ◽  
Compositional Analysis ◽  
Scanning Transmission Electron Microscope ◽  
Thin Specimen ◽  
X Ray ◽  
Volume Of Interest ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Electron Energy Loss

In the scanning transmission electron microscope (STEM) a fine probe of electrons is scanned across the thin specimen, or the probe is stationarily placed on a volume of interest, and various products of the electron-specimen interaction are then collected and used for image formation or microanalysis. The microanalysis modes usually employed in STEM include, but are not restricted to, energy dispersive X-ray analysis, electron energy loss spectroscopy, and microdiffraction.

Core–shell structures with metallic silver as nucleation agent of low expansion phases in BaO/SrO/ZnO/SiO2 glasses

CrystEngComm ◽  
2019 ◽  
Vol 21 (29) ◽  
pp. 4373-4386 ◽  
Author(s):  
Christian Thieme ◽  
Michael Kracker ◽  
Katrin Thieme ◽  
Christian Patzig ◽  
Thomas Höche ◽  
...  
Keyword(s):  
Scanning Transmission Electron Microscopy ◽  
Nucleating Agent ◽  
Shell Structures ◽  
Metallic Silver ◽  
X Ray Diffraction ◽  
Nucleation Agent ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Transmission

The role of silver as a nucleating agent in BaO/SrO/ZnO/SiO2 glasses is studied with a range of microstructure-characterization techniques, such as scanning transmission electron microscopy, ultraviolet-visible spectroscopy, and X-ray diffraction.

A Study of Grain Boundaries in High TC Superconducting Yba2Cu3O7-x Thin Films Using High Resolution Analytical Stem

1989 ◽  
Vol 169 ◽  
Author(s):  
D. H. Shin ◽  
J. Silcox ◽  
S. E. Russek ◽  
D. K. Lathrop ◽  
R. A. Buhrman
Keyword(s):  
Thin Films ◽  
High Resolution ◽  
Grain Boundaries ◽  
Scanning Transmission Electron Microscope ◽  
Atomic Resolution ◽  
High Tc ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Edx Microanalysis

AbstractGrain boundaries in thin films of high Tc YBa2Cu3O7-x superconductors have been investigated with high resolution scanning transmission electron microscope (STEM) imaging and nanoprobe energy dispersive x-ray (EDX) analysis. Atomic resolution images indicate that the grain boundaries are mostly clean, i.e., free of a boundary layer of different phase or of segregation, and are often coherent. EDX microanalysis with a 10 Å spatial resolution also indicates no composition deviation at the grain boundaries.

Crystalline phase transformation of colloidal cadmium sulfide nanocrystals

2017 ◽  
Vol 31 (06) ◽  
pp. 1750037
Author(s):  
M. Ghali ◽  
A. M. Eissa ◽  
M. M. Mosaad
Keyword(s):  
Phase Transformation ◽  
Optical Absorption ◽  
Crystalline Phase ◽  
Growth Conditions ◽  
Cubic Phase ◽  
X Ray Diffraction ◽  
Solution Ph ◽  
X Ray ◽  
Ph Values ◽  
Transmission Electron

In this paper, we give a microscopic view concerning influence of the growth conditions on the physical properties of nanocrystals (NCs) thin films made of CdS, prepared using chemical bath deposition CBD technique. We show a crystalline phase transformation of CdS NCs from hexagonal wurtzite (W) structure to cubic zincblende (ZB) when the growth conditions change, particularly the solution pH values. This effect was confirmed using X-ray diffraction (XRD), transmission electron microscopy (TEM), optical absorption and photoluminescence (PL) measurements. The optical absorption spectra allow calculation of the bandgap value, [Formula: see text], where significant increase [Formula: see text]200 meV in the CdS bandgap when transforming from Hexagonal to Cubic phase was found.

Sign in / Sign up

Export Citation Format

Share Document