Effects of Blended Steel Slag-Superfine Fly Ash Mineral Admixture and Ordinary Fly Ash on the Properties of Concrete

2013 ◽  
Vol 743-744 ◽  
pp. 323-328
Author(s):  
Qiang Wang ◽  
Pei Yu Yan ◽  
Reng Guang Liu
Keyword(s):  
Fly Ash ◽  
Steel Slag ◽  
Chloride Ion ◽  
Mineral Admixture ◽  
Ion Permeability ◽  
Early Strength

The effects of blended steel slag-superfine fly ash mineral admixture and ordinary fly ash on the properties of concrete were compared in this study. The results show that, in the case of the same adding amount, blended steel slag-superfine fly ash mineral admixture and ordinary fly ash have similar effects on the early strength and chloride ion permeability of concrete. Blended mineral admixture has higher ability to improve the late strength of concrete than ordinary fly ash. Paste and concrete containing blended mineral admixture have smaller porosities than that containing ordinary fly ash. Blended steel slag-superfine fly ash is an ideal mineral admixture for concrete.

scholarly journals Application of Ground Granulate Blast Furnace Slag-Steel Slag Composite Binder in a Massive Concrete Structure under Severe Sulphate Attack

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Jin Liu ◽  
Dongmin Wang
Keyword(s):  
Blast Furnace Slag ◽  
Steel Slag ◽  
Chloride Ion ◽  
Mineral Admixture ◽  
Sulphate Attack ◽  
Ion Permeability ◽  
Composite Binder ◽  
Massive Concrete ◽  
Granulate Blast Furnace Slag ◽  
Furnace Slag

A composite mineral binder was prepared by mixing ground granulate blast furnace slag (GGBS) and steel slag (GGBS/steel slag ratios are 1 : 1 or 3 : 2 by mass). The application of a composite binder in a massive concrete structure under severe sulphate attack is discussed by determining the hydration heat, adiabatic temperature increase, compressive strength, elastic modulus, chloride ion permeability, and sulphate attack resistance. The results show that the hydration heat of the composite binder decreases greatly when the cement replacement ratio increases to 50% at 45°C. The adiabatic temperature rise of the concrete containing the composite mineral admixture decreases significantly. Concrete containing the composite mineral admixture has a lower early elastic modulus and satisfactory late-age compressive strength. The composite mineral admixture can improve the resistance to chloride ion permeability and sulphate attack resistance of concrete, especially during temperature match curing.

Compressive Strength and Chloride Ion Permeability Test of Concrete Incorporating Fly Ash and GGBS with Diverse Water Binder Ratio

2022 ◽  
Vol 1048 ◽  
pp. 311-320
Author(s):  
Tarun Gehlot ◽  
Suresh Singh Sankhla ◽  
Sangeeta Parihar
Keyword(s):  
Fly Ash ◽  
Compression Test ◽  
Chloride Ion ◽  
Cementitious Materials ◽  
Mineral Admixture ◽  
Supplementary Cementitious Materials ◽  
Permeability Test ◽  
Ion Permeability ◽  
Binder Ratio ◽  
Water Binder Ratio

In this study conventional concrete of M40 grade developed with diverse water binder ratio and fixed optimum dosage of 30% mineral admixture fly ash and GGBS with weight of cement .Compression test has been conducted on cube samples and Rapid Chloride permeability test (RCPT) are conducted on cylindrical specimens to acknowledge durability parameter. Compression test results has been enhanced with replacement of supplementary cementitious materials and chloride ion permeability has been reduced with substitution of fly ash and GGBS .incremental of water binder ratio also reduce the permeability value however compression value increased

Test and Study on Green High-Performance Marine Concrete Containing Ultra-Fine Limestone Powder

2013 ◽  
Vol 368-370 ◽  
pp. 1112-1117
Author(s):  
Jin Hui Li ◽  
Liu Qing Tu ◽  
Ke Xin Liu ◽  
Yun Pang Jiao ◽  
Ming Qing Qin
Keyword(s):  
Fly Ash ◽  
High Performance ◽  
Mechanical Performance ◽  
Chloride Ion ◽  
Limestone Powder ◽  
Ion Permeability ◽  
High Quality ◽  
Cracking Resistance ◽  
Slag Powder ◽  
Marine Concrete

In order to solve the environment pollution of limestone powder during production of limestone manufactured sand and gravel and problem of lack of high quality fly ash or slag powder in ocean engineering, ultra-fine limestone powder was selected for preparation of green high-performance marine concrete containing fly ash and limestone powder and that containing slag powder and limestone powder for tests on workability, mechanical performance, thermal performance, shrinkage, and resistance to cracking and chloride ion permeability. And comparison was made between such green high-performance concrete and conventional marine concrete containing fly ash and slag powder. Moreover, the mechanism of green high-performance marine concrete was preliminary studied. Results showed that ultra-fine limestone powder with average particle size around 10μm had significant water reducing function and could improve early strength of concrete. C50 high-performance marine concrete prepared with 30% fly ash and 20% limestone powder or with 30% slag powder and 30% limestone powder required water less than 130kg/m3, and showed excellent workability with 28d compressive strength above 60MPa, 56d dry shrinkage rate below 300με, cracking resistance of grade V, 56d chloride ion diffusion coefficient not exceeding 2.5×10-12m2/s. Mechanical performance and resistance to chloride ion permeability of limestone powder marine concrete were quite equivalent to those of conventional marine concrete. But it had better workability, volume stability and cracking resistance. Moreover, it can serve as a solution to the lack of high quality fly ash and slag powder.

Study on Sulfate Resistance of Concrete with Compound Mineral Admixture

2011 ◽  
Vol 99-100 ◽  
pp. 420-425 ◽  
Author(s):  
Qian Rong Yang ◽  
Xiao Qian Wang ◽  
Hui Ji
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Blast Furnace Slag ◽  
Steel Slag ◽  
Sulfate Attack ◽  
Mineral Admixture ◽  
Sulfate Resistance ◽  
Chemical Attack ◽  
Granulated Blast Furnace Slag ◽  
Furnace Slag

The strength, expansion and amount of scaling of concrete with compound mineral admixture (CMA) from steel slag, granulated blast furnace slag and fly ash were studied. The result shows that damage by crystallization press from sulfate attack when concrete was exposed to sulfate environments under wetting–drying alternation is much larger than that from sulfate chemical attack. Adding CMA to concrete could reduce the damage from expansion of concrete caused by sulfate chemical attack, but the resistance of concrete to damage by crystallization press from sulfate attack was remarkably reduced.

Study on the Strength of Sea Sand Concrete in Ningbo

2011 ◽  
Vol 250-253 ◽  
pp. 262-265
Author(s):  
Jun Zhe Liu ◽  
Guo Liang Zhang ◽  
Jian Bin Chen ◽  
Zhi Min He
Keyword(s):  
Fly Ash ◽  
Influence Factor ◽  
Concrete Strength ◽  
Chloride Ion ◽  
Strength Development ◽  
Term Strength ◽  
Two Phase ◽  
Sea Sand ◽  
Early Strength

This paper mainly explain and expounded folding compressive strength of the different types of sea sand mortar , fly ash to the sea sand concretes mortar intensity influence as well as the chloride ion content to the sea sand concretes mortar intensity influence. The pulverized fly ash has the postponement function to the sea sand concretes early strength, the chloride ion has the promoter action to the sea sand concretes early strength. 20% pulverized fly ash be good to the sea sand concretes long-term strength development influence, can achieve the goal which enhances the sea sand concretes the long-term strength . The chloride ion is greater to the concretes early strength influence, especially in previous 3 days. Along with the time development, the chloride ion influence weakens, but the pulverized fly ash enlarges to the concretes intensity's influence factor. A two-phase arrived, the final concrete strength values close to each other.

Early Age Cracking Characteristic of Concrete with Compound Admixtures

2013 ◽  
Vol 325-326 ◽  
pp. 71-74
Author(s):  
Yun Feng Li ◽  
Dong Sheng Zhang ◽  
Li Xu
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Blast Furnace Slag ◽  
High Performance ◽  
High Performance Concrete ◽  
Steel Slag ◽  
Test Method ◽  
Mineral Admixture ◽  
Early Age ◽  
Furnace Slag

The shrinkage cracking of concrete plays an important role to the accelerated deterioration and shortening the service life of concrete structures. The mineral admixture will be a perfect component of high performance concrete and its utilization will be a valuable resource for recycling. Early age cracking characteristics of concrete with compound admixtures, such as steel slag, blast furnace slag, fly ash, are studied in this paper using plate test method. The better anti-cracking performance of concrete will be realized when blast furnace slag replacing cement at 30%, steel slag and fly ash as the equal mixture components replacing cement at 30%, three kinds of admixtures replacing cement at 30% under the proper proportion.

scholarly journals Damage Mechanism of Mineral Admixture Concrete under Marine Corrosion and Freezing-Thawing Environment

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Yan Li ◽  
Lianying Zhang ◽  
Chao Ma ◽  
Bing Li ◽  
Jiong Zhu
Keyword(s):  
Fly Ash ◽  
Chloride Ion ◽  
Damage Mechanism ◽  
Chloride Ions ◽  
Mineral Admixture ◽  
Ion Concentration ◽  
Dominant Factor ◽  
Marine Corrosion ◽  
Chloride Ion Penetration ◽  
Mineral Powder

Understanding the performance of concrete in the marine environment is significant for preventing the corrosion of chloride ion for marine buildings. In this study, the uniaxial compressive strength (UCS), chloride ion concentration (CIC), microstructure, and pore structure of admixture concretes were tested to study the mechanical properties and microscopic characteristics under the single marine corrosion, the single freezing-thawing, and the coupled marine corrosion and freezing-thawing conditions. The results indicate that the concrete mixed with both fly ash and mineral powder has better UCS, chloride ion penetration resistance, and freezing-thawing resistance than the concrete with the single fly ash or mineral powder. Under the marine corrosion environment and coupled corrosion and freezing-thawing environment, the UCS of the concrete with both fly ash and mineral powder increases firstly and then decreases with the increase of the corrosion time. This is because the pore of the filling body is filled by large crystalline salts generated by the reaction of chloride ions and concrete; then, cementation of the cement is increased in the early corrosion; meanwhile, the increase of crystal salt in the subsequent corrosion process leads to the growth of microcracks and the formation of macrocracks in concrete specimens. In addition, a freezing-thawing-corrosion composite strength impact factor is introduced to describe the effect of coupled corrosion and freezing-thawing on the mechanical property of the concrete. The results show that the corrosion is the dominant factor after 0, 30, and 60 freezing-thawing cycles, while the freezing-thawing is the dominant factor after 90 freezing-thawing cycles.

Microscopic Mechanism of the Diffusivity of Concrete Chloride Ion

2013 ◽  
Vol 773 ◽  
pp. 687-692 ◽  
Author(s):  
Jun Liu ◽  
Feng Xing ◽  
Bi Qing Dong
Keyword(s):  
Fly Ash ◽  
Early Stage ◽  
Great Influence ◽  
Chloride Ion ◽  
Test Method ◽  
Mineral Admixture ◽  
Microscopic Mechanism ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
The Impact

Use concrete specimens with different mix proportions to conserve them for 90d taking into account the influence of mineral admixture material---fly ash. Then adopts the RCM test method to measure the rapid diffusivity of chloride ion of concrete and observes the microstructure of the cement paste using the SEM (scanning electron microscopy), aiming to study the impact of fly ash on its hydration process. The results show that the micro-pore structure of the concrete has a great influence on the rapid diffusivity of chloride ion, while its diffusivity is closely related with the water-cement ratio of concrete; after the fly ash is added, the ettringite generation of the concrete in the early stage decreases, and the interspace of the transition zone between the hydrated particles and hydration slurry is enlarged, coupled with the increase in the intercommunicating pore; after curing for 90d, the chloride ion diffusivity decreases significantly with the increase in the dosage of fly ash. For the concrete with the fly ash dosage of 15%, its chloride ion diffusivity is only 75.4% of that with the same water-cement ratio; when its fly ash content is 30%, its chloride ion diffusivity is only 32.3% of the ordinary concrete.

Sign in / Sign up

Export Citation Format

Share Document