Mechanical Performance of Natural Fibers Reinforced Geopolymer Composites

2013 ◽  
Vol 758 ◽  
pp. 139-145 ◽  
Author(s):  
Edvaldo Amaro S. Correia ◽  
Sandro Marden Torres ◽  
Marcio Eliel de Oliveira Alexandre ◽  
Kelly C. Gomes ◽  
Normando P. Barbosa ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Mechanical Performance ◽  
Natural Fibers ◽  
Mechanical Tests ◽  
Ananas Comosus ◽  
Classical Type ◽  
Pineapple Leaf Fiber ◽  
Agave Sisalana ◽  
Geopolymer Composites

The use of geopolymers as matrix in composites with syntactical fibers have been studied and proposed in the literature. Nonetheless, for the best know of the authors, there are no researches about the use of geopolymers as matrix in composites with natural fibers. The use of natural fibers is increasing in the automotive industries. One of the problems to expand the use of natural fibers in composite materials is the low fire resistance of the classical type of polymers. In this sense, geopolymeric matrices open up horizons for this type of application. This paper studies composites with geopolymeric matrices reinforced with two types of natural fibers: sisal (Agave Sisalana) and pineapple leaf fiber (PALF-Ananas Comosus). The mechanical properties of these new composites are investigated by mechanical tests. The results confirm the increasing in the mechanical performance whenever the fibers are under traction stress.

Development of Banana/Coir Natural Fibers Reinforced Polypropylene Hybrid Composites: The Effect of MA-g-PP (Maleic Anhydride Grafted Polypropylene) on Mechanical Properties and Thermal Properties

2021 ◽  
Vol 32 ◽  
pp. 85-97
Author(s):  
Gunturu Bujjibabu ◽  
Vemulapalli Chittaranjan Das ◽  
Malkapuram Ramakrishna ◽  
Konduru Nagarjuna
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Coupling Agent ◽  
Mechanical Performance ◽  
Hybrid Composites ◽  
Natural Fibers ◽  
Mechanical Tests ◽  
Coir Fiber ◽  
Banana Fiber ◽  
C Fibers

Banana/Coir fiber reinforced polypropylene hybrid composites was formulated by using twin screw extruder and injection molding machine. Specimens were prepared untreated and treated B/C Hybrid composites with 4% and 8% of MA-g-PP to increase its compatibility with the polypropylene matrix. Both the without MA-g-PP and with MA-g-PP B/C hybrid composites was utilized and three levels of B/C fiber loadings 15/5, 10/10 and 5/15 % were used during manufacturing of B/C reinforced polypropylene hybrid composites. In this work mechanical performance (tensile, flexural and impact strengths) of untreated and treated (coupling agent) with 4% and 8% of MA-g-PP B/C fibers reinforced polypropylene hybrid composite have been investigated. Treated with MA-g-PP B/C fibers reinforced specimens explored better mechanical properties compared to untreated B/C fibers reinforced polypropylene hybrid composites. Mechanical tests represents that tensile, flexural and impact strength increases with increase in concentration of coupling agent compared to without coupling agent MA-g-PP hybrid composites . B/C fibers reinforced polymer composites exhibited higher tensile, flexural and impact strength at 5% of Banana fiber, 15% of fiber Coir in the presence of 8% of MA-g-PP compared to 4% of MA-g-PP and untreated hybrid composites. The percentage of water absorption in the B/C fibers reinforced polypropylene hybrid composites resisted due to the presence of coupling agent MA-g-PP and thermogravimetry analysis (TGA) also has done.

The Mechanical Properties of Organic Modified Epoxy Resin

2020 ◽  
Vol 43 (3) ◽  
pp. 10-14
Author(s):  
Georgel MIHU ◽  
Claudia Veronica UNGUREANU ◽  
Vasile BRIA ◽  
Marina BUNEA ◽  
Rodica CHIHAI PEȚU ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Epoxy Resin ◽  
Epoxy Matrix ◽  
Epoxy Resins ◽  
Mechanical Tests ◽  
Organic Modification ◽  
Three Point Bending ◽  
Modified Epoxy

Epoxy resins have been presenting a lot of scientific and technical interests and organic modified epoxy resins have recently receiving a great deal of attention. For obtaining the composite materials with good mechanical proprieties, a large variety of organic modification agents were used. For this study gluten and gelatin had been used as modifying agents thinking that their dispersion inside the polymer could increase the polymer biocompatibility. Equal amounts of the proteins were milled together and the obtained compound was used to form 1 to 5% weight ratios organic agents modified epoxy materials. To highlight the effect of these proteins in epoxy matrix mechanical tests as three-point bending and compression were performed.

scholarly journals Tension mechanical properties of recycled glass-epoxy composite material

2012 ◽  
pp. 189-198 ◽  
Author(s):  
Jelena Petrovic ◽  
Darko Ljubic ◽  
Marina Stamenovic ◽  
Ivana Dimic ◽  
Slavisa Putic
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Composite Material ◽  
Composite Materials ◽  
Modulus Of Elasticity ◽  
Epoxy Composite ◽  
Raw Materials ◽  
Mechanical Tests ◽  
Recycled Glass ◽  
Before And After

The significance of composite materials and their applications are mainly due to their good properties. This imposes the need for their recycling, thus extending their lifetime. Once used composite material will be disposed as a waste at the end of it service life. After recycling, this kind of waste can be used as raw materials for the production of same material, which raises their applicability. This indicates a great importance of recycling as a method of the renowal of composite materials. This study represents a contribution to the field of mechanical properties of the recycled composite materials. The tension mechanical properties (tensile strength and modulus of elasticity) of once used and disposed glass-epoxy composite material were compared before and after the recycling. The obtained results from mechanical tests confirmed that the applied recycling method was suitable for glass-epoxy composite materials. In respect to the tensile strength and modulus of elasticity it can be further assessed the possibility of use of recycled glass-epoxy composite materials.

scholarly journals Mechanical Performance Under Various Conditions of 3D Printed Polylactide Composites With Natural Fibers

2021 ◽  
Author(s):  
Karolina E. Mazur ◽  
Aleksandra Borucka ◽  
Paulina Kaczor ◽  
Szymon Gądek ◽  
Stanislaw Kuciel
Keyword(s):  
Elevated Temperatures ◽  
Mechanical Performance ◽  
Natural Fibers ◽  
Crystallization Rate ◽  
Mechanical Tests ◽  
Hydrothermal Degradation ◽  
3D Printed ◽  
The Impact ◽  
Different Levels ◽  
Additive Methods

Abstract In the study, polylactide-based (PLA) composites modified with natural particles (wood, bamboo, and cork) and with different levels of infilling (100%, 80%, and 60%) obtained by additive methods were tested. The effect of type fiber, infill level and crystallization rate on the mechanical properties were investigated by using tensile, flexural, and impact tests. The materials were subjected to mechanical tests carried out at 23 and 80 °C. Furthermore, hydrothermal degradation was performed, and its effect on the properties was analyzed. The addition of natural fillers and different level of infilling result in a similar level of reduction in the properties. Composites made of PLA are more sensitive to high temperature than to water. The decrease in Young's modulus of PLA at 80 °C was 90%, while after 28 days of hydrodegradation ~ 9%. The addition of fibers reduced this decrease at elevated temperatures. Moreover, the impact strength has been improved by 50% for composites with cork particles and for other lignocellulosic composites remained at the same level as for resin.

scholarly journals Mechanical Performance of Unstitched and Silk Fiber-Stitched Woven Kenaf Fiber-Reinforced Epoxy Composites

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4801
Author(s):  
Yasir Khaleel Kirmasha ◽  
Mohaiman J. Sharba ◽  
Zulkiflle Leman ◽  
Mohamed Thariq Hameed Sultan
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Mechanical Performance ◽  
Mechanical Test ◽  
Natural Fibers ◽  
Silk Fiber ◽  
Epoxy Composites ◽  
Test Results ◽  
The Impact ◽  
Woven Kenaf

Fiber composites are known to have poor through-thickness mechanical properties due to the absence of a Z-direction binder. This issue is more critical with the use of natural fibers due to their low strength compared to synthetic fibers. Stitching is a through-thickness toughening method that is used to introduce fibers in the Z-direction, which will result in better through-thickness mechanical properties. This research was carried out to determine the mechanical properties of unstitched and silk fiber-stitched woven kenaf-reinforced epoxy composites. The woven kenaf mat was stitched with silk fiber using a commercial sewing machine. The specimens were fabricated using a hand lay-up method. Three specimens were fabricated, one unstitched and two silk-stitched with deferent stitching orientations. The results show that the stitched specimens have comparable in-plane mechanical properties to the unstitched specimens. For the tensile mechanical test, stitched specimens show similar and 17.1% higher tensile strength compared to the unstitched specimens. The flexural mechanical test results show around a 9% decrease in the flexural strength for the stitched specimens. On the other hand, the Izod impact mechanical test results show a significant improvement of 33% for the stitched specimens, which means that stitching has successfully improved the out-of-plane mechanical properties. The outcome of this research indicates that the stitched specimens have better mechanical performance compared to the unstitched specimens and that the decrease in the flexural strength is insignificant in contrast with the remarkable enhancement in the impact strength.

Statistical analysis of the mechanical properties of natural fibers and their composite materials. I. Natural fibers

2008 ◽  
Vol 29 (3) ◽  
pp. 313-320 ◽  
Author(s):  
Laura Peponi ◽  
Jerico Biagiotti ◽  
Luigi Torre ◽  
Josè M. Kenny ◽  
Iñaki Mondragòn
Keyword(s):  
Mechanical Properties ◽  
Statistical Analysis ◽  
Composite Materials ◽  
Natural Fibers

Evaluation of Mechanical Properties of Regenerated Bone by Nanoindentation Technique

2010 ◽  
Vol 654-656 ◽  
pp. 2220-2224 ◽  
Author(s):  
Takuya Ishimoto ◽  
Takayoshi Nakano
Keyword(s):  
Mechanical Properties ◽  
Young’S Modulus ◽  
Bone Tissue ◽  
Material Properties ◽  
Mechanical Performance ◽  
Young's Modulus ◽  
Mechanical Tests ◽  
Long Bone ◽  
Nanoindentation Technique ◽  
Intact Bone

To evaluate the material parameters of regenerated bone, it is important to clarify the mechanical performance of the regenerated portion. In general, the shape and size of regenerated bone tissue is heterogeneous. It is often difficult to elucidate material properties by means of conventional mechanical tests such as compressive and/or tensile tests and bending tests. The nanoindentation technique has been utilized to evaluate the material properties of small or microstructured materials because they do not necessarily require a large well-designed specimen. Thus, this technique may be useful for the evaluation of the material properties of regenerated bone tissue. In this study, this technique was applied for the assessment of the Young’s modulus and hardness of regenerated and intact long bones of a rabbit. The regenerated bone exhibited a significantly lower Young’s modulus and hardness than the intact bone. The regenerated long bone also exhibited impaired mechanical properties, which may have been caused by the difference in the nano-organization of its collagen fibers and mineral crystals (the main components of bone tissue), from that of the intact bone.

scholarly journals Evaluation of the mechanical characteristics of hygrothermally aged 2-D basalt-aramid/epoxy hybrid interply composites

2021 ◽  
Vol 2070 (1) ◽  
pp. 012234
Author(s):  
Yogeesha Pai ◽  
Dayananda Pai K ◽  
M Vijaya Kini
Keyword(s):  
Mechanical Properties ◽  
Moisture Absorption ◽  
Mechanical Performance ◽  
Mechanical Tests ◽  
Moisture Uptake ◽  
Molding Process ◽  
Micro Cracks ◽  
Different Types ◽  
Temperature Ageing ◽  
Saturation Absorption

Abstract Polymer composites used in outdoor applications are exposed to environmental factors such as temperature and moisture which may affect the mechanical performance of the composites. In this study, the influence of moisture absorption on the mechanical properties of basalt-aramid/epoxy hybrid interply composites were evaluated. Two different types hybrid interply composites were taken for the investigation namely (301 A/03 B/301 A) and (451 A/03B/451 A). Composites were prepared using compression molding process and cut specimens were subjected to three different ageing environments for 180 days. Selected ageing conditions are, (i) ambient temperature ageing (ii) Sub-zero temperature ageing (−10°C) and (iii) Humid temperature ageing (40°C and 60% Relative humidity). Mechanical tests of the aged composites were carried out to analyse the behaviour of the composites. Moisture uptake of the specimens follow Fick’s law of diffusion with saturation absorption of 5.44%, 3.12% and 1.80% for ambient, sub-zero and humid specimens respectively. Results revealed that (301 a/03 B/301 a) aged composites possess higher mechanical properties compared to (451 a/03 B/451 a) aged composites. Highest reduction in properties were observed in ambient aged specimens followed by humid and sub-zero specimens. Scanning electron microscopy (SEM) was employed to observe the damage modes of the fractured specimens. Matrix deterioration, micro cracks and fibre fracture were the major types of failures observed in aged laminates.

Optimization of 3D woven preform for improved mechanical performance

2018 ◽  
Vol 48 (7) ◽  
pp. 1206-1227 ◽  
Author(s):  
Muhammad Kashif ◽  
Syed Talha Ali Hamdani ◽  
Yasir Nawab ◽  
Muhammad Ayub Asghar ◽  
Muhammad Umair ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Performance ◽  
Research Work ◽  
Natural Fibers ◽  
Physical And Mechanical Properties ◽  
Areal Density ◽  
Vital Role ◽  
Woven Composites ◽  
Woven Structures ◽  
Weave Pattern

For structural design applications, through-thickness characteristics of reinforcement played a vital role, which is why 3D woven preforms are recommended for such applications. These characteristics are mainly dependent on the fiber and yarn positioning in reinforcement. Although research has been conducted for characterizing woven composites, special attention has not been made on weave pattern parameter which directly affects the mechanical performance of composites. In this research work, 3D orthogonal layer to layer and through thickness woven structures with different interlocking patterns have been thoroughly studied for their mechanical properties, thickness, air permeability and areal density. Natural fibers when used with biodegradable matrix find use in structural, as well as low to medium impact applications for automobiles. Jute yarn was used to produce four-layered 3D woven structures, as synthetic fibers will not give a biodegradable composite part. The focus of this study is to optimize weave pattern, which is robust in design, degradable preforms and easy to reproduce. The main objective of this research focused on the effectiveness of weaving patterns on physical and mechanical properties as well as to optimize the weave pattern for optimum performance. Grey relational analysis was used for the optimization of the robust weave pattern. The results showed that hybrid structures can be useful for improving the properties of the orthogonal layer to layer and through thickness woven structures. It was also noted that weft-way 3D woven structures can provide comparable mechanical properties with warp-way 3D woven structures.

Theoretical and Experimental Review of Applied Mechanical Tests for Carbon Composites with Thermoplastic Polymer Matrix

2019 ◽  
Vol 2019 (4) ◽  
pp. 55-65
Author(s):  
Anna Bona
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Polymer Matrix ◽  
Polymer Matrix Composites ◽  
Aerospace Industry ◽  
Mechanical Tests ◽  
Thermoplastic Polymer ◽  
Test Procedures ◽  
Carbon Fibre Reinforced Polymer ◽  
Static Tensile

Abstract This article has a theoretical and experimental character. It presents the characteristics of two main thermoplastics used in the aerospace industry – poly ether ether ketone (PEEK) and poly phenylene sulphide (PPS). The selected materials are compounds for the production of thermoplastic polymer matrix composites. The paper presents a literature review of the application of thermoplastic polymer matrix composite materials in aviation. Additionally, the paper focuses on the characteristics of carbon fibre-reinforced polymer (CFRP) which plays an important role in the production of aerospace components. Testing methods have been chosen on the basis of the type of composite matrix. The article contains the most important mechanical properties and general characteristics of thermoplastics used as a matrix for CFRP type composites used in the aerospace industry. Individual test procedures which allow for the evaluation of mechanical properties of composite materials on a thermoplastic polymer matrix, have been described. Mechanical tests such as static tensile test and bending of short beams were carried out in order to examine CFRP composites.

Sign in / Sign up

Export Citation Format

Share Document