High Performance 1.2kV-2.5kV 4H-SiC MOSFETs with Excellent Process Capability and Robustness

2016 ◽  
Vol 858 ◽  
pp. 876-879 ◽  
Author(s):  
Peter A. Losee ◽  
Alexander Bolotnikov ◽  
Stacey Kennerly ◽  
Christopher Collazo-Davila ◽  
David Lilienfeld ◽  
...  
Keyword(s):  
Process Control ◽  
High Performance ◽  
State Of The Art ◽  
Process Capability ◽  
Design Sensitivity ◽  
Starting Material ◽  
Device Performance ◽  
Sensitivity Curves ◽  
The Impact

In this paper, we show state of the art, low on-resistance, 25mW/1.2kV and 43mW/2.5kV SiC MOSFETs with excellent design robustness and process control such that the parametric spread of key device characteristics are approaching Si products. The impact of starting material variability on device performance is shown and design sensitivity curves are presented.

scholarly journals Fatigue Cracking of Additively Manufactured Materials—Process and Material Perspectives

2020 ◽  
Vol 10 (16) ◽  
pp. 5556
Author(s):  
Torsten Fischer ◽  
Bernd Kuhn ◽  
Detlef Rieck ◽  
Axel Schulz ◽  
Ralf Trieglaff ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Fatigue Strength ◽  
Process Control ◽  
High Performance ◽  
Chemical Engineering ◽  
Fatigue Cracking ◽  
Metal Powders ◽  
Wide Range ◽  
Manufacturing Techniques ◽  
The Impact

Strong efforts are made internationally to optimize the process control of laser additive manufacturing processes. For this purpose, advanced detectors and monitoring software are being developed to control the quality of production. However, commercial suppliers of metal powders and part manufacturers are essentially focused on well-established materials. This article demonstrates the potential of optimized process control. Furthermore, we outline the development of a new high temperature structural steel, tailored to best utilize the advantages of additive manufacturing techniques. In this context, the impact of production-induced porosity on fatigue strength of austenitic 316L is presented. Additionally, we discuss the first conceptual results of a novel ferritic steel, named HiperFer (High Performance Ferrite), which was designed for increased fatigue strength. This ferritic, Laves phase-strengthened, stainless steel could be used for a wide range of structural components in power and (petro)chemical engineering at maximum temperatures ranging from about 580 to 650 °C. This material benefits from in situ heat treatment and counteracts process-related defects by “reactive” crack obstruction mechanisms, hampering both crack initiation and crack propagation. In this way, increased fatigue resistance and safety can be achieved.

scholarly journals Optimization strategies for geophysics models on manycore systems

2019 ◽  
Vol 33 (3) ◽  
pp. 473-486 ◽  
Author(s):  
Matheus S Serpa ◽  
Eduardo HM Cruz ◽  
Matthias Diener ◽  
Arthur M Krause ◽  
Philippe OA Navaux ◽  
...  
Keyword(s):  
Wave Propagation ◽  
High Performance ◽  
Oil And Gas ◽  
State Of The Art ◽  
Propagation Model ◽  
Cache Memory ◽  
Performance Scaling ◽  
Knights Landing ◽  
The Impact ◽  
Performance Computing

Many software mechanisms for geophysics exploration in oil and gas industries are based on wave propagation simulation. To perform such simulations, state-of-the-art high-performance computing architectures are employed, generating results faster with more accuracy at each generation. The software must evolve to support the new features of each design to keep performance scaling. Furthermore, it is important to understand the impact of each change applied to the software to improve the performance as most as possible. In this article, we propose several optimization strategies for a wave propagation model for six architectures: Intel Broadwell, Intel Haswell, Intel Knights Landing, Intel Knights Corner, NVIDIA Pascal, and NVIDIA Kepler. We focus on improving the cache memory usage, vectorization, load balancing, portability, and locality in the memory hierarchy. We analyze the hardware impact of the optimizations, providing insights of how each strategy can improve the performance. The results show that NVIDIA Pascal outperforms the other considered architectures by up to 8.5[Formula: see text].

scholarly journals Impact of Delay Time before Annealing MAI-PbI2-DMSO Intermediate Phase on Perovskite Film Quality and Photo-Physical Properties

Crystals ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 151 ◽  
Author(s):  
Yujun Yao ◽  
Xiaoping Zou ◽  
Jin Cheng ◽  
Dan Chen ◽  
Chuangchuang Chang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Physical Properties ◽  
Delay Time ◽  
High Performance ◽  
Intermediate Phase ◽  
Perovskite Solar Cells ◽  
Device Performance ◽  
Perovskite Layer ◽  
The Impact

High-performance perovskite solar cells are strongly dependent on the quality of the perovskite layer. Two-step sequential deposition of CH3NH3PbI3 (MAPbI3) films is widely used to fabricate perovskite solar cells and many factors influence the quality of perovskite films, such as the delay time before annealing the MAI-PbI2-DMSO intermediate phase, which would impact the morphology and photo-physical properties of perovskite thin films. Here, the experimental research indicates that the impact of the delay time before annealing the MAI-PbI2-DMSO intermediate phase on the quality, crystallinity, and photo-physical properties of perovskite film is crucial. During the delay process, the delay time before annealing the MAI-PbI2-DMSO intermediate phase plays an important role in the nucleation process of perovskite grains inside the intermediate phase. With the extension of the delay time before annealing, the quality of the perovskite film deteriorates, thus the photo-physical properties change. We found that after the localized liquid–liquid diffusion of MAI and PbI2, with the extension of the delay time before annealing the MAI-PbI2-DMSO intermediate phase, the nucleation number of the perovskite grains increases and the grain size becomes smaller. Therefore, with the extension of the delay time before annealing, the device performance deteriorates.

Mobility Enhancement by Strained Nitride Liners for 65nm CMOS Logic Design Features

2006 ◽  
Vol 913 ◽  
Author(s):  
Claude Ortolland ◽  
Pierre Morin ◽  
Franck Arnaud ◽  
Stephane Orain ◽  
Chandra Reddy ◽  
...  
Keyword(s):  
State Of The Art ◽  
Cmos Technology ◽  
Device Performance ◽  
Logic Design ◽  
Design Features ◽  
Induced Stress ◽  
Etch Stop ◽  
The Right ◽  
The Impact

AbstractIn this paper the impact of processed-induced stress and transistor layout on device performance in state-of-the-art 65nm CMOS technology has been studied. We have focused this analysis on different nitride liners above devices (Contact Etch-Stop Layers – CESL) which have been fabricated on two differently oriented (100) substrates: <110> and <100>. This overview permits to have a good understanding of CESL, and to choose the right strategy in terms of process induced stress in future microelectronic technologies.

Dietary Vitamin and Stability of Oral Anticoagulation: Proposal of a Diet with Constant Vitamin K1 Content

1997 ◽  
Vol 77 (03) ◽  
pp. 504-509 ◽  
Author(s):  
Sarah L Booth ◽  
Jacqueline M Charnley ◽  
James A Sadowski ◽  
Edward Saltzman ◽  
Edwin G Bovill ◽  
...  
Keyword(s):  
Dietary Intake ◽  
Vitamin K ◽  
High Performance ◽  
Case Reports ◽  
Food Composition ◽  
Dietary Guidelines ◽  
Dietary Vitamin ◽  
Vitamin K1 ◽  
The Stability ◽  
The Impact

SummaryCase reports cited in Medline or Biological Abstracts (1966-1996) were reviewed to evaluate the impact of vitamin K1 dietary intake on the stability of anticoagulant control in patients using coumarin derivatives. Reported nutrient-drug interactions cannot always be explained by the vitamin K1 content of the food items. However, metabolic data indicate that a consistent dietary intake of vitamin K is important to attain a daily equilibrium in vitamin K status. We report a diet that provides a stable intake of vitamin K1, equivalent to the current U.S. Recommended Dietary Allowance, using food composition data derived from high-performance liquid chromatography. Inconsistencies in the published literature indicate that prospective clinical studies should be undertaken to clarify the putative dietary vitamin K1-coumarin interaction. The dietary guidelines reported here may be used in such studies.

A trait collection of spring groat barley

2018 ◽  
pp. 85-96
Author(s):  
I.A. Petukhova ◽  
V.K. Riabchun ◽  
V.A. Muzapharova ◽  
O.I. Padalka ◽  
T.A. Sheliakina ◽  
...  
Keyword(s):  
High Performance ◽  
Spring Barley ◽  
Vegetation Period ◽  
Grain Weight ◽  
Starting Material ◽  
Economic Traits ◽  
The Czech Republic ◽  
Science And Education ◽  
New Varieties ◽  
1000 Grain Weight

The goal of our research was to form a collection of groats barley, to search, to select and to evaluate starting material of spring barley for a set of valuable economic traits, technological properties and culinary qualities of barley groats. Results and Discussion. Basing on to the results of assessments, we identified selected 55 spring barley accessions, which were characterized by 17 traits and 75 expression levels. The collection includes accessions from 11 countries; the largest number of accessions (59) are from Ukraine; 39 – from Russia; 10 - from Belarus; 10 - from Germany; 6 - from France; 5 - from Kazakhstan; 4 - from Canada; 3 - from the Czech Republic; 2 – from Great Britain; 1 accesson is from Serbia; and 1 - from Austria. Accessions combining high levels of expression of different traits are the most valuable. They include the following accessions: Doridnyi, Vodohrai, Sviatomykhailivskyi, Svarozhych, Soka, Іlot (UKR). Naked accessions include: Akhilles (UKR), Mayskiy, Oskar, Golozyornyy 1, Omskiy Golozyornyy 1 (RUS), CDC Alamo, CDC Candle (CAN). These varieties can be starting material for creation of new modern high-performance spring groats barley varieties. Ten valuable accessions registered with the NCPGRU (Sovіra, Doridnyi, Soka, Vodohrai, Partner, Yukatan, Avhii, Svarozhych, Baskak, and Virtuoz) were included in the trait groats collection. Conclusions. Basing on the results of multiyear studies, we formed the trait collection of spring groats barley comprising 140 accessions from 11 countries. The collection includes 55 reference accessions that cover 17 traits (plant height, vegetation period, ear length, grain weight per ear, 1000-grain weight, grain shape, grain evenness, vitreousness, culinary qualities of barley groats, etc.) characterized by 75 levels of their expression. The collection is of considerable value for science and education. The accessions selected allow improving the efficiency of breeding to create new varieties with high technological and culinary properties as well as with a set of valuable economic characteristics.

Alpha Tocopherol Loaded in Liposome: Preparation, Optimization, Characterization and Sperm Motility Protection

2020 ◽  
Vol 10 (3) ◽  
pp. 228-236 ◽  
Author(s):  
Lamia Taouzinet ◽  
Sofiane Fatmi ◽  
Allaeddine Khellouf ◽  
Mohamed Skiba ◽  
Mokrane Iguer-ouada
Keyword(s):  
Vitamin E ◽  
Sperm Motility ◽  
High Performance ◽  
Positive Impact ◽  
Alpha Tocopherol ◽  
Ethanol Injection ◽  
Liposome Preparation ◽  
Liposome Size ◽  
Optimum Solution ◽  
The Impact

Background: Alpha-tocopherol is a potent antioxidant involved in sperm protection particularly during cryopreservation. However, its poor solubility limits the optimal protection in aqueous solutions. Objective: The aim of this study was to enhance the solubility of α-tocopherol by the use of liposomes. Methods: The experimental approach consisted to load vitamin E in liposomes prepared by ethanol injection method and the optimization carried out by an experimental design. The optimum solution was characterized by high performance liquid chromatography and scanning electron microscope. Finely, the impact on sperm motility protection was studied by the freezing technic of bovine sperm. Results: The optimum solution was obtained when using 10.9 mg/ml of phospholipids, 1.7 mg/ml of cholesterol and 2 mg/ml of vitamin E. The liposome size was 99.86 nm, providing 78.47% of loaded efficiency. The results showed also a significant positive impact on sperm motility after hours of preservation. Conclusion: In conclusion, the current results showed the interest of liposome preparation as an alternative to enhance vitamin E solubility and to protect spermatozoa during cryopreservation.

Sign in / Sign up

Export Citation Format

Share Document