Fabrication and Microstructure Study of Aluminum Matrix Composites Reinforced with SiC and B4C Particulates

2017 ◽  
Vol 16 ◽  
pp. 26-29 ◽  
Author(s):  
Gurpreet Singh Saini ◽  
Sanjeev Goyal
Keyword(s):  
Hybrid Composites ◽  
Aluminum Matrix ◽  
Base Material ◽  
Casting Process ◽  
Stir Casting ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
The Matrix ◽  
Sic Composites ◽  
Xrd Patterns

In the present paper aluminum matrix composites were fabricated using base material AA6082-T6. SiC and B4C particulates were used as reinforcement to obtain hybrid and non-hybrid composites through the conventional stir casting process. AA6082-T6/SiC composites with 5, 10, 15 and 20 wt % of SiC; AA6082-T6/B4C composites with 5, 10, 15 and 20 wt % of B4C and AA6082-T6/(SiC+B4C) hybrid composites with 5, 10, 15 and 20 wt % of (SiC+B4C) taking equal fraction of SiC and B4C were made and the microstructure study was carried out. X-Ray diffraction (XRD) patterns revels the presence of reinforcement within the matrix along with some other compounds. The microstructure of the fabricated composites was examined with the help of Scanning electron microscope (SEM) and the micrographs revealed that the dispersion of reinforced particles was reasonably uniform at all weight percentages.

Influence of Ti and Zn on Particle Incorporation of AlB2, B and B4C Particles in Aluminum Using the Stir Casting Process

2017 ◽  
Vol 742 ◽  
pp. 173-180
Author(s):  
Steven Plötz ◽  
Andreas Lohmüller ◽  
Robert F. Singer
Keyword(s):  
Liquid Aluminum ◽  
Aluminum Matrix ◽  
Casting Process ◽  
Stir Casting ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Gas Entrapment ◽  
Particle Incorporation ◽  
Particle Feeding ◽  
Partial Vacuum

The outstanding performance of many aluminum matrix composites (AMCs) regarding specific stiffness makes AMCs attractive materials for lightweight construction. Low density boride compounds promise both an increase in stiffness and decrease in composite density. Therefore for this study AlB2, B and B4C were chosen for composite manufacturing. The composites were fabricated with the stir casting process. To avoid gas entrapment during mixing and ensure nonporous composites, partial vacuum was adapted during particle feeding and stirring. Poor wettability of used particle material in contact with liquid aluminum hindered particle incorporation, but alloying elements such as titanium were shown to affect wettability and particle incorporation for B4C. Zn had no influence on wettability or reactivity and did not improve particle incorporation. In contrast to Zn, Ti improved adhesion and wettability, but particle incorporation was improved exclusively for B4C. Besides alloying Ti, the use of high-shear force mixers improved particle incorporation enabling uniform particle distribution. AMCs with up to 12 vol.% of B4C particles were produced via stir casting without alloying Ti.

Fabrication and Characterization of Aluminum Matrix Composite (AMCs) Reinforced Graphite by Stir Casting Method for Automotive Application

2020 ◽  
Vol 988 ◽  
pp. 17-22
Author(s):  
Suryana ◽  
Indah Uswatun Hasanah ◽  
Muhammad Fikri Fadhillah ◽  
Yordan Valentino Putra
Keyword(s):  
Mechanical Properties ◽  
Intermetallic Phase ◽  
Aluminum Matrix ◽  
High Hardness ◽  
Stir Casting ◽  
Aluminum Matrix Composite ◽  
Automotive Application ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
The Matrix

The effects of graphite and magnesium (Mg) addition on mechanical properties and microstructure of aluminum matrix composites (AMCs) have been investigated in this work. Aluminum alloy (ADC-12) was combined with graphite and Mg produced by stir casting. The effect of addition of graphite into the matrix has been studied with variation 2, 4 and 6 wt-% for each composite. The addition of Mg as wetting agent was introduced wit 0.4, 0.6 and 0.8 wt-% to promote wettability between ADC-12 and graphite. All composites were characterized both microstructures analysis and mechanical properties include tensile strength and hardness. The higher reinforcement content, the higher porosity formed, due to the tendency of de-wetting as well as particles agglomeration. One of the main intermetallic phase present evenly in aluminum matrix is Mg2Si. The addition of magnesium in the material that will form Mg2Si primary phases which have a high hardness value of these composites.

scholarly journals The Investigation of Machinability and Surface Properties of Aluminium Alloy Matrix Composites

2021 ◽  
Vol 53 (4) ◽  
pp. 210412
Author(s):  
Priyadarsini Morampudi ◽  
Venkata Ramana V.S.N. ◽  
Koona Bhavani ◽  
Amrita M ◽  
V Srinivas
Keyword(s):  
Surface Roughness ◽  
Aluminum Matrix ◽  
Stir Casting ◽  
Aluminum Matrix Composites ◽  
Al Alloy ◽  
Matrix Composites ◽  
Casting Method ◽  
Alloy Matrix ◽  
The Matrix ◽  
Aluminium Alloy Matrix

Aluminum matrix composites (AMCs) are crucial to the progress of composite application areas due to their remarkable mechanical properties. Their usage has expanded into different fields such as the aerospace, automobile, and defense industries. The present study used wrought Al alloy AA6061 as the matrix, while ilmenite (FeTiO3) particles were used as reinforcement at different weight percentages to prepare metal matrix composites. One of the most economical and simple casting routes among the several available fabrication techniques for the preparation of composites is the stir casting method, which was applied in the present investigation to prepare the AMCs. The machinability of the fabricated composites and the surface roughness property after machining were studied to understand the effect of speed and feed during machining. The results showed that an increase in speed decreased the cutting forces and the surface roughness. Meanwhile, an increase in surface roughness was observed with an increase in feed.

Production of Al Metal Matrix Composites by the Stir-Casting Method

2013 ◽  
Vol 592-593 ◽  
pp. 614-617 ◽  
Author(s):  
Konstantinos Anthymidis ◽  
Kostas David ◽  
Pavlos Agrianidis ◽  
Afroditi Trakali
Keyword(s):  
Mechanical Properties ◽  
Metal Matrix Composites ◽  
Automobile Industry ◽  
Metal Matrix ◽  
Aluminum Matrix ◽  
Stir Casting ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Casting Method ◽  
Alloy Matrix

It is well known that the addition of ceramic phases in an alloy e.g. aluminum, in form of fibers or particles influences its mechanical properties. This leads to a new generation of materials, which are called metal matrix composites (MMCs). They have found a lot of application during the last twenty-five years due to their low density, high strength and toughness, good fatigue and wear resistance. Aluminum matrix composites reinforced by ceramic particles are well known for their good thermophysical and mechanical properties. As a result, during the last years, there has been a considerable interest in using aluminum metal matrix composites in the automobile industry. Automobile industry use aluminum alloy matrix composites reinforced with SiC or Al2O3 particles for the production of pistons, brake rotors, calipers and liners. However, no reference could be cited in the international literature concerning aluminum reinforced with TiB particles and Fe and Cr, although these composites are very promising for improving the mechanical properties of this metal without significantly alter its corrosion behavior. Several processing techniques have been developed for the production of reinforced aluminum alloys. This paper is concerned with the study of TiB, Fe and Cr reinforced aluminum produced by the stir-casting method.

Compressive Deformation of Hollow Microsphere Reinforced Metal Matrix Composites

1994 ◽  
Vol 372 ◽  
Author(s):  
M. T. Kiser ◽  
M. He ◽  
B. Wuj ◽  
F. W. Zok
Keyword(s):  
Aluminum Matrix ◽  
Hollow Microsphere ◽  
Compressive Deformation ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Element Analysis ◽  
Strength Enhancement ◽  
The Matrix ◽  
Matrix Flow ◽  
Measured Strength

AbstractThe compressive deformation characteristics of hollow alumina microsphere reinforced aluminum matrix composites have been studied through both experiments and finite element analysis of unit cell models. Tests have been performed on composites containing around 50 volume percent of microspheres. The effects of the matrix flow stress and microsphere morphology (characterized by the ratio of wall thickness to radius) have been examined. The measured strength enhancement due to the hollow microspheres was found to be considerably less than that predicted by the FEM calculations; a result of microsphere cracking. Experiments have been conducted to document the progression of such damage following casting and mechanical deformation. The potential of this class of composite for impact energy absorption applications is also explored.

scholarly journals Evaluation of Mechanical Properties of AA7075 /Al2O3/Mg Hybrid Composites

2019 ◽  
Vol 8 (6) ◽  
pp. 5044-5046 ◽  
Keyword(s):  
Mechanical Properties ◽  
Hybrid Composites ◽  
Casting Process ◽  
Stir Casting ◽  
Tensile Behaviour ◽  
Matrix Composites ◽  
Compression Behavior ◽  
Weight Percentage ◽  
Fea Simulation ◽  
Alloy Metal

The present work was planned to evaluate the mechanical properties of alumina reinforced aluminium alloy such hardness and compression behavior of al2o3 /aa7075 alloy metal matrix composites. Both, experimental and finite element analyses were carried out to establish tensile behaviour of the composites with different weight percentage of al2o3 fabricated by the stir casting process. The results concluded that addition of alumina to the aa7075 improves the mechanical properties of the composite. Further the results of FEA simulation of the composites are close to the actual results which shows that cost and time can be reduced if FEA is performed

Fabrication and Characterization of A356-Basalt Ash-Fly Ash Composites Processed by Stir Casting Method

2017 ◽  
Vol 25 (3) ◽  
pp. 209-214 ◽  
Author(s):  
G. Venkatachalam ◽  
A. Kumaravel
Keyword(s):  
Fly Ash ◽  
Impact Strength ◽  
Hybrid Composites ◽  
Cost Effective ◽  
Weight Fraction ◽  
Stir Casting ◽  
Matrix Composites ◽  
Casting Method ◽  
The Matrix

This paper presents the characterization of A356 composite reinforced with fly ash and basalt ash produced by stir casting method. Aluminium metal matrix composites (AMC) are used in wide variety of applications such as structural, aerospace, marine, automotive etc. Stir casting is cost effective manufacturing process and it is useful to enhance the attractive properties of AMCs. Three sets of hybrid AMC are prepared by varying the weight fraction of the reinforcements (3% basalt + 7% fly ash, 5% basalt + 5% fly, 7% basalt + 3% fly ash). The effect of reinforcements on the mechanical properties of the hybrid composites such as hardness, tensile, compressive and impact strength were studied. The obtained results reveal that tensile, compressive and impact strength was increased when weight fraction of fly ash increased, whereas the hardness increases when weight fraction of the basalt ash increased. Microscopic study reveals the dispersion of the reinforcements in the matrix.

High-temperature mechanical behavior of Al-Cu matrix composites containing diboride particles

2014 ◽  
Vol 21 (1) ◽  
pp. 29-38
Author(s):  
Oscar Marcelo Suárez ◽  
Natalia Cortes-Urrego ◽  
Sujeily Soto-Medina ◽  
Deborah Marty-Flores
Keyword(s):  
High Temperature ◽  
Aluminum Matrix ◽  
Copper Matrix ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Compression Creep ◽  
The Matrix ◽  
Material Creep ◽  
Copper Matrix Composite ◽  
Composite Hardness

AbstractAn aluminum-copper matrix composite reinforced with aluminum diboride particles was studied at high temperature via thermomechanometry experiments. The matrix contained 2 wt% Cu, whereas the amount of boron forming AlB2 ranged from 0 to 4 wt%, i.e., 0 to 8.31 vol% of diboride particles. In the first segment of the research, we demonstrated that larger amounts of AlB2 particles raised the composite hardness even at 300°C. To assess the material creep behavior, another set of specimens were tested under 1 N compression at 400°C and 500°C for 12 h. Higher levels of AlB2 allowed the composites to withstand compression creep deformations at those temperatures. By using existing creep models developed for metal matrix composites we were able to determine that viscous slip deformation was the dominant deformation mechanism for the temperatures and stress levels used in our experiments. Additionally, the computed creep activation energy for these aluminum matrix composites were found comparable to the energies reported for other similar materials, for instance, Al/SiCp composites.

scholarly journals Investigations of the Tribological Performance of A390 Alloy Hybrid Aluminum Matrix Composite

Materials ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 2524 ◽  
Author(s):  
Abhilash Edacherian ◽  
Ali Algahtani ◽  
Vineet Tirth
Keyword(s):  
Hybrid Composites ◽  
Aluminum Matrix ◽  
Particulate Composite ◽  
Tribological Performance ◽  
Processing Route ◽  
Dry Sliding Wear ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Soft Phase ◽  
A390 Alloy

Several challenges stand in the way of the production of metal matrix composites (MMCs) such as higher processing temperatures, particulate mixing, particulate–matrix interface bonding issues, and the ability to process into desired geometrical shapes. Although there are many studies showing composites with single particulate reinforcements, studies on composites with multiple reinforcing agents (hybrid composites) are found to be limited. Development of a hybrid particulate composite with optimized mechanical and tribological properties is very significant to suit modern engineering applications. In this study, Al–Si hypereutectic alloy (A390) was used as the matrix and silicon carbide (SiC), graphite (Gr), and molybdenum di-sulphide (MoS2) were used as particulates. Particulate volume (wt %) was varied and sample test castings were made using a squeeze casting process through a stir casting processing route. The evaluation of the mechanical testing indicates that the presence of both the hard phase (SiC) and the soft phase had distinct effect on the properties of the hybrid aluminum matrix composites (HAMCs). Composite samples were characterized to understand the performance and to meet the tribological applications. The 3D profilometry of the fractured surfaces revealed poor ductility and scanning electron microscopy fractography study indicated an intra-granular brittle fracture for HAMCs. Also, the dry sliding wear tests indicated that the newly developed HAMCs had better tribological performance compared to that of A390 alloy.

Sign in / Sign up

Export Citation Format

Share Document