Magnetodynamics and Self-Organization in Strongly Non-Equilibrium Ferrosuspensions

2009 ◽  
Vol 152-153 ◽  
pp. 175-181
Author(s):  
Bronislav Kashevsky ◽  
Sergei Kashevsky ◽  
Igor Prokhorov
Keyword(s):  
Smart Materials ◽  
Materials Science ◽  
Magnetic Hysteresis ◽  
Experimental Studies ◽  
Rotating Magnetic Field ◽  
Self Organization ◽  
Linearly Polarized ◽  
Dilute Suspension ◽  
Soft Particles ◽  
Non Equilibrium

This paper presents computational and experimental studies of two phenomena occurring in magnetic suspensions under strongly non-equilibrium conditions created by high-frequency (in comparison with the inverse characteristic time of the particle mechanical motion) magnetic fields. First is the dynamic magnetic hysteresis in a dilute suspension of highly-coercive particles subjected to linearly polarized fields. Energy absorption by particles is of great interest for cancer treatment, chemical technology, biology and smart materials science. Second is related to polymer composite technologies and represents dissipative self-organization of a system of magnetically soft particles in a drying thin layer of polymer solution set under a rotating magnetic field

A glance on rare earth oxides: importance, reserves, demand, applications, critical uncertainties, global economy, and zeta potential characterization

2020 ◽  
Vol 05 ◽  
Author(s):  
Silas Santos ◽  
Orlando Rodrigues ◽  
Letícia Campos
Keyword(s):  
Rare Earth ◽  
Zeta Potential ◽  
Sample Preparation ◽  
Rare Earths ◽  
Smart Materials ◽  
Global Economy ◽  
Materials Science ◽  
Functional Materials ◽  
Rare Earth Oxides ◽  
Interparticle Forces

Background: Innovation mission in materials science requires new approaches to form functional materials, wherein the concept of its formation begins in nano/micro scale. Rare earth oxides with general form (RE2O3; RE from La to Lu, including Sc and Y) exhibit particular proprieties, being used in a vast field of applications with high technological content since agriculture to astronomy. Despite of their applicability, there is a lack of studies on surface chemistry of rare earth oxides. Zeta potential determination provides key parameters to form smart materials by controlling interparticle forces, as well as their evolution during processing. This paper reports a study on zeta potential with emphasis for rare earth oxide nanoparticles. A brief overview on rare earths, as well as zeta potential, including sample preparation, measurement parameters, and the most common mistakes during this evaluation are reported. Methods: A brief overview on rare earths, including zeta potential, and interparticle forces are presented. A practical study on zeta potential of rare earth oxides - RE2O3 (RE as Y, Dy, Tm, Eu, and Ce) in aqueous media is reported. Moreover, sample preparation, measurement parameters, and common mistakes during this evaluation are discussed. Results: Potential zeta values depend on particle characteristics such as size, shape, density, and surface area. Besides, preparation of samples which involves electrolyte concentration and time for homogenization of suspensions are extremely valuable to get suitable results. Conclusion: Zeta potential evaluation provides key parameters to produce smart materials seeing that interparticle forces can be controlled. Even though zeta potential characterization is mature, investigations on rare earth oxides are very scarce. Therefore, this innovative paper is a valuable contribution on this field.

Studying changes in the electrical resistance of carbon-nanotubes-modified elastomers during their compression, stretching and torsion

2019 ◽  
pp. 128-138
Author(s):  
V. S. Yagubov ◽  
A. V. Shchegolkov ◽  
A. V. Shchegolkov ◽  
N. R. Memetov
Keyword(s):  
Composite Material ◽  
Smart Materials ◽  
Electrical Resistance ◽  
Materials Science ◽  
Measuring System ◽  
Constant Current ◽  
Matrix Composition ◽  
Space Industry ◽  
Different Types ◽  
Elastomer Composites

Developing "smart" materials with improved both structural and functional characteristics is one of the promising areas of materials science. Measuring the electrical resistance of CNTs-modified (various mass contents) polymers and in particular, elastomers during performing several tests (compression, stretching, and torsion) at a constant current is relevant in electrical engineering, mechanical engineering, aviation, and space industry. Changes in the elastomer shape under different types of testing lead to the destruction of macromolecules and the structuring of the material as a whole. Therefore, it is important to study the effect of CNTsbased modifying fillers on the elastomer. When compressing, stretching or twisting the nano-modified elastomer, along with the mutual movement of its macromolecular fragments and aggregates, the modifier particles also move, which generally determines the transport of electrons in the resulting structure and affects the physical and mechanical parameters of the composite material. To conduct studies, elastomers containing different amounts of a CNTs-based modifying filler were prepared. To investigate and elucidate relevant dependencies, a measuring system (MS) was constructed, which makes it possible to determine electrical resistance values of the composite material with different CNTs contents in the polymer matrix composition exposed to various mechanical loads. Basing the research results, it was established that the electrical resistance of the elastomer composites modified with 1.0–2.5 wt.% CNTs decreases when compressing from 0 to 100 N, whereas when the compression force ranges from 100 to 350 N, the electrical resistance remains unchanged. When the elastomer composites modified with 2–2.5 wt.% CNTs were stretched by 30–40 %, the electrical resistance was found to increase from 5·103 to 1.9·107 Ω.

scholarly journals Magnetoactive elastomers for magnetically tunable vibrating sensor systems

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Tatiana I. Becker ◽  
Yuriy L. Raikher ◽  
Oleg V. Stolbov ◽  
Valter Böhm ◽  
Klaus Zimmermann
Keyword(s):  
Magnetic Field ◽  
Steady State ◽  
Smart Materials ◽  
Excitation Frequency ◽  
Experimental Studies ◽  
Uniform Field ◽  
Sensor Systems ◽  
Ongoing Research ◽  
Amplification Ratio ◽  
Field Distortion

Abstract Magnetoactive elastomers (MAEs) are a special type of smart materials consisting of an elastic matrix with embedded microsized particles that are made of ferromagnetic materials with high or low coercivity. Due to their composition, such elastomers possess unique magnetic field-dependent material properties. The present paper compiles the results of investigations on MAEs towards an approach of their potential application as vibrating sensor elements with adaptable sensitivity. Starting with the model-based and experimental studies of the free vibrational behavior displayed by cantilevers made of MAEs, it is shown that the first bending eigenfrequency of the cantilevers depends strongly on the strength of an applied uniform magnetic field. The investigations of the forced vibration response of MAE beams subjected to in-plane kinematic excitation confirm the possibility of active magnetic control of the amplitude-frequency characteristics. With change of the uniform field strength, the MAE beam reveals different steady-state responses for the same excitation, and the resonance may occur at various ranges of the excitation frequency. Nonlinear dependencies of the amplification ratio on the excitation frequency are obtained for different magnitudes of the applied field. Furthermore, it is shown that the steady-state vibrations of MAE beams can be detected based on the magnetic field distortion. The field difference, which is measured simultaneously on the sides of a vibrating MAE beam, provides a signal with the same frequency as the excitation and an amplitude proportional to the amplitude of resulting vibrations. The presented prototype of the MAE-based vibrating unit with the field-controlled “configuration” can be implemented for realization of acceleration sensor systems with adaptable sensitivity. The ongoing research on MAEs is oriented to the use of other geometrical forms along with beams, e.g. two-dimensional structures such as membranes.

Inverse Ostwald Ripening and Self-Organization of Nanoclusters due to Ion Irradiation

2000 ◽  
Vol 647 ◽  
Author(s):  
K.-H. Heinig ◽  
B. Schmidt ◽  
M. Strobel ◽  
H. Bernas
Keyword(s):  
Phase Separation ◽  
Ion Implantation ◽  
Ostwald Ripening ◽  
Ion Irradiation ◽  
Experimental Studies ◽  
Self Organization ◽  
Mathematical Treatment ◽  
Thermodynamical Equilibrium ◽  
Unusual Behavior ◽  
Thermally Activated

AbstractUnder ion irradiation collisional mixing competes with phase separation if the irradiated solid consists of immiscible components. If a component is a chemical compound, there is another competition between the collisional forced chemical dissociation of the compound and its thermally activated re-formation. Especially at interfaces between immiscible components, irradiation processes far from thermodynamical equilibrium may lead to new phenomena. If the formation of nanoclusters (NCs) occurs during ion implantation, the phase separation caused by ion implantation induced supersaturation can be superimposed by phenomena caused by collisional mixing. In this contribution it will be studied how collisional mixing during high-fluence ion implantation affects NC synthesis and how ion irradiation through a layer of NCs modifies their size and size distribution. Inverse Ostwald ripening of NCs will be predicted theoretically and by kinetic lattice Monte-Carlo simulations. The mathematical treatment of the competition between irradiation-induced detachment of atoms from clusters and their thermally activated diffusion leads to a Gibbs-Thomson relation with modified parameters. The predictions have been confirmed by experimental studies of the evolution of Au NCs in SiO2 irradiated by MeV ions. The unusual behavior results from an effective negative capillary length, which will be shown to be the reason for inverse Ostwald ripening. Another new phenomenon to be addressed is self-organization of NCs in a d-layer parallel to the Si/SiO2 interface. Such d-layers were found when the damage level at the interface was of the order of 1-3 dpa. It will be discussed that the origin of the d-layer of NCs can be assigned to two different mechanisms: (i) The negative interface energy due to collisional mixing gives rise to the formation of tiny clusters of substrate material in front of the interface, which promotes heteronucleation of the implanted impurities. (ii) Collisional mixing in the SiO2produces diffusing oxygen, which may be consumed by the Si/SiO2 interface. A thin layer parallel to the interface becomes denuded of diffusing oxygen, which results in a strong pile up of Si excess. This Si excess promotes heteronucleation too. Independent of the dominating mechanism of self-organization of a d-layer of NCs, its location in SiO2 close to the SiO2/Si interface makes it interesting for non-volatile memory application.

Regenerative Medicine: Applications and Development in Urology

2007 ◽  
Vol 74 (4) ◽  
pp. 197-205
Author(s):  
F. Pinto ◽  
A. Calarco ◽  
A. Brescia ◽  
E. Sacco ◽  
A. D'addessi ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Embryonic Stem Cells ◽  
Regenerative Medicine ◽  
Cell Transplantation ◽  
Materials Science ◽  
Experimental Studies ◽  
Embryonic Stem ◽  
Human Embryos ◽  
Engineering Applications

Purpose Congenital abnormalities and acquired disorders can lead to organ damage and loss. Nowadays, transplantation represents the only effective treatment option. However, there is a marked decrease in the number of organ donors, which is even yearly worsening due to the population aging. The regenerative medicine represents a realistic option that allows to restore and maintain the normal functions of tissues and organs. This article reviews the principles of regenerative medicine and the recent advances with regard to its application to the genitourinary tract. Recent findings The field of regenerative medicine involves different areas of technology, such as tissue engineering, stem cells and cloning. Tissue engineering involves the field of cell transplantation, materials science and engineering in order to create functional replacement tissues. Stem cells and cloning permit the extraction of pluripotent, embryonic stem cells offering a potentially limitless source of cells for tissue engineering applications. Most current strategies for tissue engineering depend upon a sample of autologous cells from the patient's diseased organ. Biopsies from patients with extensive end-stage organ failure, however, may not yield enough normal cells. In these situations, stem cells are envisaged as being an alternative source. Stem cells can be derived from discarded human embryos (human embryonic stem cells), from fetal tissue or from adult sources (bone marrow, fat, skin). Therapeutic cloning offers a potentially limitless source of cells for tissue engineering applications. Regenerative medicine and tissue engineering scientists have increasingly applied the principles of cell transplantation, materials science and bioengineering to construct biological substitutes that will restore and maintain normal function in urological diseased and injured tissues such as kidney, ureter, bladder, urethra and penis. Conclusions Regenerative medicine offers several applications in acquired and congenital genitourinary diseases. Tissue engineering, stem cells and, mostly, cloning have been applied in experimental studies with excellent results. Few preliminary human applications have been developed with promising results.

FORC analysis of magnetically soft microparticles embedded in a polymeric elastic environment

2022 ◽  
Author(s):  
Dmitry Yu Borin ◽  
Mikhail V Vaganov
Keyword(s):  
Particle Concentration ◽  
Magnetic Hysteresis ◽  
Magnetic Response ◽  
Soft Matrix ◽  
First Order ◽  
Matrix Elasticity ◽  
Intrinsic Coercivity ◽  
The Matrix ◽  
Soft Particles ◽  
Elastomer Composites

Abstract First-order reversal curve (FORC) analysis allows one to investigate composite magnetic materials by decomposing the magnetic response of a whole sample into individual responses of the elementary objects comprising the sample. In this work, we apply this technique to analysing silicone elastomer composites reinforced with ferromagnetic microparticles possessing low intrinsic coercivity. Even though the material of such particles does not demonstrate significant magnetic hysteresis, the soft matrix of the elastomers allows for the translational mobility of the particles and enables their magnetomechanical hysteresis which renders into a wasp-waisted major magnetization loop of the whole sample. It is demonstrated that the FORC diagrams of the composites contain characteristic wing features arising from the collective hysteretic magnetization of the magnetically soft particles. The influence of the matrix elasticity and particle concentration on the shape of the wing feature is investigated, and an approach to interpreting experimental FORC diagrams of the magnetically soft magnetoactive elastomers is proposed. The experimental data are in qualitative agreement with the results of the simulation of the particle magnetization process obtained using a model comprised of two magnetically soft particles embedded in an elastic environment.

scholarly journals Self-organizing dominance hierarchies in a wild primate population

2015 ◽  
Vol 282 (1814) ◽  
pp. 20151512 ◽  
Author(s):  
Mathias Franz ◽  
Emily McLean ◽  
Jenny Tung ◽  
Jeanne Altmann ◽  
Susan C. Alberts
Keyword(s):  
Individual Differences ◽  
Social Dynamics ◽  
Experimental Studies ◽  
Self Organization ◽  
Social Self ◽  
Dominance Hierarchies ◽  
Change Over Time ◽  
Winner And Loser Effects ◽  
The Social ◽  
Over Time

Linear dominance hierarchies, which are common in social animals, can profoundly influence access to limited resources, reproductive opportunities and health. In spite of their importance, the mechanisms that govern the dynamics of such hierarchies remain unclear. Two hypotheses explain how linear hierarchies might emerge and change over time. The ‘prior attributes hypothesis’ posits that individual differences in fighting ability directly determine dominance ranks. By contrast, the ‘social dynamics hypothesis’ posits that dominance ranks emerge from social self-organization dynamics such as winner and loser effects. While the prior attributes hypothesis is well supported in the literature, current support for the social dynamics hypothesis is limited to experimental studies that artificially eliminate or minimize individual differences in fighting abilities. Here, we present the first evidence supporting the social dynamics hypothesis in a wild population. Specifically, we test for winner and loser effects on male hierarchy dynamics in wild baboons, using a novel statistical approach based on the Elo rating method for cardinal rank assignment, which enables the detection of winner and loser effects in uncontrolled group settings. Our results demonstrate (i) the presence of winner and loser effects, and (ii) that individual susceptibility to such effects may have a genetic basis. Taken together, our results show that both social self-organization dynamics and prior attributes can combine to influence hierarchy dynamics even when agonistic interactions are strongly influenced by differences in individual attributes. We hypothesize that, despite variation in individual attributes, winner and loser effects exist (i) because these effects could be particularly beneficial when fighting abilities in other group members change over time, and (ii) because the coevolution of prior attributes and winner and loser effects maintains a balance of both effects.

scholarly journals ДОСЛІДЖЕННЯ ГІГІЄНІЧНИХ ВЛАСТИВОСТЕЙ МАТЕРІАЛІВ НАТІЛЬНОЇ ЛІКАРНЯНОЇ БІЛИЗНИ

2020 ◽  
Vol 140 (6) ◽  
pp. 38-47
Author(s):  
І. О. Іванов ◽  
Н. П. Супрун ◽  
Ю. О. Ващенко
Keyword(s):  
Comparative Analysis ◽  
Materials Science ◽  
Experimental Studies ◽  
Operating Conditions ◽  
Raw Material ◽  
Experimental Investigations ◽  
Textile Materials ◽  
Composition And Structure ◽  
Innovative Materials ◽  
Basic Functions

Investigation of the influence of the peculiarities of raw material composition and structure of traditional and innovative linen textile materials on their hygienic properties. Theoretical and experimental investigations are based on the main positions of textile materials science. In experimental studies, modern standardized methods for determining the hygienic properties of textile materials were used, as well as techniques specially developed taking into account the peculiarities of the operating conditions of underwear. The peculiarities of the operating conditions and the basic functions of hospital underwear were determined. The comparative analysis of hygienic properties of traditional and modern fabrics for underwear was carried out. Using the standardized and the developed methods, adapted to the peculiarities of the conditions of use of the products, the indicators characterizing the processes of water absorption of the materials were experimentally determined. On the basis of the obtained values of quality indicators, a comprehensive assessment of the ability of materials to transfer moisture and air, with the calculation of the arithmetic complex quality index was done. This allowed to determine the material that is optimal in properties, which provides thermophysiological comfort when operating hospital underwear. Using the developed methods, which take into account the specifics of the operating conditions, a comparative analysis of the hygienic properties of traditional and innovative materials for underwear was carried out. A new range of textile materials for underwear has been proposed, taking into account the peculiarities of the operational situation of consumption.

Sign in / Sign up

Export Citation Format

Share Document