Thermodynamic Analysis of Copper Melt Deoxidation with Lanthanum

2017 ◽  
Vol 265 ◽  
pp. 900-905
Author(s):  
O.V. Samoilova ◽  
G.G. Mikhailov ◽  
L.A. Makrovets
Keyword(s):  
Electron Microscope ◽  
Microprobe Analysis ◽  
Electron Microprobe Analysis ◽  
Energy Dispersive Spectrometer ◽  
Rare Earth Metals ◽  
Inclusion Type ◽  
Experimental Part ◽  
Copper Melt ◽  
Oxide Phases ◽  
Scanning Electron

Using rare earth metals as deoxidizers is an efficient way of getting highly deoxidized copper melt required for certain bronzes production. Thermodynamic modeling of phase equilibria in the Cu–La–O system in the temperature range of 1100–1300 °С was performed to assess a possible depth of copper melt deoxidation with lanthanum, and also to determine the resulting oxide phases. During the experimental part of the work, Cu–La–O system metal samples were melted and then studied with the JEOL JSM 6460-LV scanning electron microscope equipped with the energy-dispersive spectrometer providing electron microprobe analysis to specify formed nonmetallic inclusion type.

Microstructure and microanalysis of sintered Fe-Nd-B permanent magnets

1990 ◽  
Vol 48 (4) ◽  
pp. 990-991
Author(s):  
Mahesh Chandramouli
Keyword(s):  
Electron Microscope ◽  
Liquid Phase ◽  
Permanent Magnets ◽  
Phase Distribution ◽  
Energy Dispersive Spectrometer ◽  
Nucleation And Growth ◽  
Liquid Phase Sintering ◽  
Domain Wall Energy ◽  
Oxide Phases ◽  
Scanning Electron

Magnetization reversal in sintered Fe-Nd-B, a complex, multiphase material, occurs by nucleation and growth of reverse domains making the isolation of the ferromagnetic Fe14Nd2B grains by other nonmagnetic phases crucial. The magnets used in this study were slightly rich in Nd (in comparison to Fe14Nd2B) to promote the formation of Nd-oxides at multigrain junctions and incorporated Dy80Al20 as a liquid phase sintering addition. Dy has been shown to increase the domain wall energy thus making nucleation more difficult while Al is thought to improve the wettability of the Nd-oxide phases.Bulk polished samples were examined in a JEOL 35CF scanning electron microscope (SEM) operated at 30keV equipped with a Be window energy dispersive spectrometer (EDS) detector in order to determine the phase distribution.

Scanning Electron Microscopy and Electron Microprobe Analysis of Malignant Cell Cultures

1968 ◽  
Vol 26 ◽  
pp. 164-165
Author(s):  
R. I. Johnsson-Hegyeli ◽  
A. F. Hegyeli ◽  
D. K. Landstrom ◽  
W. C. Lane
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cell Cultures ◽  
Electron Microprobe ◽  
Microprobe Analysis ◽  
Electron Microprobe Analysis ◽  
Three Dimensional ◽  
Malignant Cell ◽  
Interference Microscopy ◽  
Scanning Electron

Last year we reported on the use of reflected light interference microscopy (RLIM) for the direct color photography of the surfaces of living normal and malignant cell cultures without the use of replicas, fixatives, or stains. The surface topography of living cells was found to follow underlying cellular structures such as nuceloli, nuclear membranes, and cytoplasmic organelles, making possible the study of their three-dimensional relationships in time. The technique makes possible the direct examination of cells grown on opaque as well as transparent surfaces. The successful in situ electron microprobe analysis of the elemental composition and distribution within single tissue culture cells was also reported.This paper deals with the parallel and combined use of scanning electron microscopy (SEM) and the two previous techniques in a study of living and fixed cancer cells. All three studies can be carried out consecutively on the same experimental specimens without disturbing the cells or their structural relationships to each other and the surface on which they are grown. KB carcinoma cells were grown on glass coverslips in closed Leighto tubes as previously described. The cultures were photographed alive by means of RLIM, then fixed with a fixative modified from Sabatini, et al (1963).

Study on the Formation of Nanometer Silver Sol by Micro Arc Discharge

2014 ◽  
Vol 490-491 ◽  
pp. 8-13
Author(s):  
Jing Yang ◽  
Zhi Yu Yan ◽  
Bing Sun ◽  
Qiao Min Wang
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Electrolyte Solution ◽  
Sodium Citrate ◽  
Preparation Method ◽  
Arc Discharge ◽  
Energy Dispersive Spectrometer ◽  
Original Size ◽  
Stabilizer Type ◽  
Scanning Electron

A preparation of nanometer silver sol by micro arc discharge has been study here through the reduction of Ag3PO4. Sodium citrate and polyvinylpyrrolidone were added respectively into the electrolyte as stabilizer. The results show that, the Ag3PO4 concentration, stabilizer type and concentration have great impacts on the formation of the nanometer silver sol. By means of UV-VIS extinction spectrophotometer, scanning electron microscope and energy dispersive spectrometer, it is found that the solid powder extracted from the electrolyte solution after discharge is the aggregation of the silver formed in the solution and their original size maybe less than 20nm. Nanometer silver with smaller size and narrower size distribution can be obtained with sodium citrate as stabilizer than with polyvinylpyrrolidone. But the latter has higher conversion rate. From this experiment, we found that micro arc discharge can be a rapid, stable preparation method of nanometer silver sol.

scholarly journals Calorimetric study on Bi-Cu-Sn alloys

2019 ◽  
Vol 38 (2019) ◽  
pp. 541-546
Author(s):  
Jolanta Romanowska
Keyword(s):  
Differential Scanning Calorimetry ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Temperature Interval ◽  
Energy Dispersive Spectrometer ◽  
Energy Dispersive ◽  
Calorimetric Study ◽  
Calorimetric Investigation ◽  
Scanning Calorimetry ◽  
Scanning Electron

AbstractThe paper presents results of calorimetric investigation of the Bi-Cu-Sn system by means of differential scanning calorimetry (DSC) at the temperature interval 25-1250∘C, Values of liquidus, solidus and invariant reactions temperatures, as well as melting enthalpies of the selected alloys were determined. Microstructure investigation of the alloys were performed by the use of a scanning electron microscope (SEM) equipped with an energy-dispersive spectrometer (EDS).

Electron microscope and microprobe analysis of chlorite–mica stacks in the Wenlock turbidites, mid Wales, U.K.

1986 ◽  
Vol 123 (3) ◽  
pp. 299-306 ◽  
Author(s):  
Andrew J. Dimberline
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Microprobe Analysis ◽  
Electron Microprobe Analysis ◽  
Source Area ◽  
Pressure Solution ◽  
Pore Waters ◽  
Bulk Rock ◽  
High K ◽  
Backscattered Electron

AbstractChlorite–mica stacks in the Wenlock turbidites have been studied using backscattered electron microscopy and electron microprobe analysis, combined with thin-section work and bulk rock chemical analysis. The stacks occur in fine sandstones and silt–mud turbidites and range in length from < 30 μm to 1.5 mm. They consist of interlayered packets of Fe-rich chlorite and mica.Combined textural and chemical data suggest that many of the stacks represent altered detrital biotite micas. A four-stage alteration sequence is proposed:(1) Subaerial alteration of biotite, in the source area, to interlayered biotite–hydrobiotite/vermiculite.(2) Post-depositional collapse of vermiculite to form a mica phase under conditions of high K+/H+ in the sediment pore waters.(3) Decrease in K+/H+ ratio, possibly due to H+ build up in the fermentation zone, causing alteration of biotite layers to chlorite.(4) Kinking of the stacks and pressure solution of chlorite early in the development of cleavage.

scholarly journals Effect of Cerium on the Microstructure and Inclusion Evolution of C-Mn Cryogenic Vessel Steels

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5262
Author(s):  
Liping Wu ◽  
Jianguo Zhi ◽  
Jiangshan Zhang ◽  
Bo Zhao ◽  
Qing Liu
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Heterogeneous Nucleation ◽  
Energy Dispersive Spectrometer ◽  
Energy Dispersive ◽  
Vessel Steel ◽  
Cryogenic Vessel ◽  
Central Segregation ◽  
Scanning Electron

The effects of Cerium (Ce) were studied on the casting slab quality, microstructure, and inclusion evolution of cryogenic vessel steel. An optical metallographic microscope, scanning electron microscope, energy dispersive spectrometer, and Thermo-calc thermodynamic software were used for characterization and analysis. The results indicated that the central segregation was significantly improved after adding Ce and reached the lowest level when the content of Ce was 0.0009 wt.%. Meanwhile, the presence of Ce reduces the size of ferrite and improves pearlite morphology. Ce also enables the modification of Al2O3 and MnS + Ti4C2S2 inclusions into ellipsoid CeAlO3 and spherical Ce2O2S + Ti4C2S2 composite inclusions, respectively, which are easier to remove. The formed Ce2O2S inclusions are fine and can work as heterogeneous nucleation points to refine the microstructure of steel.

Effect of Nano CaO and MgO Addition on the Inclusions Composition in the Cast Microstructure of X80 Pipeline Steel

2013 ◽  
Vol 395-396 ◽  
pp. 289-292
Author(s):  
Yan Liu ◽  
Chun Lin He ◽  
Qian He Ma ◽  
Yang Liu
Keyword(s):  
Electron Microscope ◽  
Molten Steel ◽  
Pipeline Steel ◽  
Energy Dispersive Spectrometer ◽  
X80 Pipeline Steel ◽  
Composite Oxides ◽  
Segregation Phenomenon ◽  
Calcium And Magnesium ◽  
Scanning Electron ◽  
Cast Microstructure

Nanometer calcium and magnesium oxides were added into molten steel by the carrier method in the experiment. The experiment takes the X80 pipeline steel as the research object and analyses the effect of nanometer calcium and magnesium oxides addition on the inclusions in the cast microstructure of the X80 pipeline steel. The scanning electron microscope (SEM) and energy dispersive spectrometer (EDS) were used to analyze the composition of the inclusions in the cast microstructure of the X80 pipeline steel. The result reveals that when no addition of nanooxides, the inclusions in the cast microstructure are the C-Fe-Si-Al-Mn-based inclusions. When adding nanoMgO, the inclusions are mainly the composite oxides of Fe-Mg-Si-O, Fe-Mg-Si-Mn-O and Mg-Si-Mn-Al-O. When adding nanoCaO, the inclusions are mainly the composite oxides of Fe-Ca-Al-O, Fe-Ca-Si-O, Fe-Ca-Si-Mn-O and the composite oxides or sulfides of Fe-Ca-Si-Mn-O-S. There is more Fe in some inclusions and Fe is not uniformly dispersed in the molten steel. As the result, some certain segregation phenomenon takes place.

Sign in / Sign up

Export Citation Format

Share Document