scholarly journals On the synthesis and characterization of β-tricalcium phosphate scaffolds coated with collagen or poly (D, L-lactic acid) for alveolar bone augmentation

2017 ◽  
Vol 11 (04) ◽  
pp. 496-502 ◽  
Author(s):  
Isadora S. Deschamps ◽  
Gabriel L. Magrin ◽  
Ricardo S. Magini ◽  
Márcio C. Fredel ◽  
Cesar A.M. Benfatti ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Tricalcium Phosphate ◽  
Type I Collagen ◽  
Alveolar Bone ◽  
Porous Ceramic ◽  
Polyurethane Foams ◽  
Type I ◽  
X Ray ◽  
Collagen Group ◽  
Coating Method

ABSTRACT Objectives: After tooth loss, dimensional alterations on the alveolar bone ridge can occur that can negatively affect the placement of dental implants. The purpose of this study was to evaluate the synthesis, and mechanical properties of β-tricalcium phosphate (β-TCP) scaffolds coated with bioabsorbable polymers, namely, collagen and poly (D, L-lactic acid) (PDLLA). Materials and Methods: β-TCP powder was obtained by reactive milling and then characterized by X-ray diffraction and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS). β-TCP scaffolds were obtained by replica method, in which polyurethane foams are immersed in β-TCP suspension and thereafter submitted to a thermal treatment to remove the polyurethane and sinter the ceramic. Type-I collagen or PDLLA were used to coat the β-TCP scaffolds by dip-coating method. Scaffolds were separated in four groups depending on the coating material: noncoated (Group A), double immersion in collagen (Group B), double immersion in PDLLA (Group C), and ten immersions in PDLLA (Group D). Samples were characterized by compressive tests and SEM/EDS. Data were statistically analyzed through two-way ANOVA (p = 0.05). Results: Chemical and microscopic analyses revealed proper morphology and chemical composition of powder particles and scaffolds with or without polymeric coatings. Scaffolds coated with PDLLA showed higher compressive strength (0.11 ± 0.054 MPa) than those of collagen (0.022 ± 0.012 MPa) or noncoated groups (0.024 ± 0.012 MPa). Conclusions: The coating method of β-TCP with PDLLA revealed a potential strategy to increase the mechanical strength of porous ceramic materials while collagen can enhance cell migration.

A new model for packing of type-I collagen molecules in the native fibril

1981 ◽  
Vol 1 (10) ◽  
pp. 801-810 ◽  
Author(s):  
Karl A. Piez ◽  
Benes L. Trus
Keyword(s):  
Type I Collagen ◽  
Hexagonal Lattice ◽  
Three Dimensional ◽  
Equatorial Region ◽  
Type I ◽  
X Ray Diffraction ◽  
X Ray ◽  
Left Handed ◽  
Crystal Model ◽  
Collagen Molecules

A specific fibril model is presented consisting of bundles of five-stranded microfibrils, which are usually disordered (except axially) but under lateral compression become ordered. The features are as follows (where D = 234 residues or 67 nm): (1) D-staggered collagen molecules 4.5 D long in the helical microfibril have a left-handed supercoil with a pitch of 400–700 residues, but microfibrils need not have helical symmetry. (2) Straight-tilted 0.5-D overlap regions on a near-hexagonal lattice contribute the discrete x-ray diffraction reflections arising from lateral order, while the gap regions remain disordered. (3) The overlap regions are equivalent, but are crystallographically distinguished by systematic displacements from the near-hexagonal lattice. (4) The unit cell is the same as in a recently proposed three-dimensional crystal model, and calculated intensities in the equatorial region of the x-ray diffraction pattern agree with observed values.

Sub‐ and Supramolecular X‐Ray Characterization of Engineered Tissues from Equine Tendon, Bovine Dermis, and Fish Skin Type‐I Collagen

2020 ◽  
Vol 20 (5) ◽  
pp. 2000017 ◽  
Author(s):  
Alberta Terzi ◽  
Nunzia Gallo ◽  
Simona Bettini ◽  
Teresa Sibillano ◽  
Davide Altamura ◽  
...  
Keyword(s):  
Type I Collagen ◽  
Skin Type ◽  
Type I ◽  
Fish Skin ◽  
X Ray ◽  
Engineered Tissues

scholarly journals Maintenance of chondrocyte phenotype during expansion on PLLA microtopographies

2018 ◽  
Vol 9 ◽  
pp. 204173141878982 ◽  
Author(s):  
Elisa Costa ◽  
Cristina González-García ◽  
José Luis Gómez Ribelles ◽  
Manuel Salmerón-Sánchez
Keyword(s):  
Lactic Acid ◽  
Type I Collagen ◽  
Collagen Type ◽  
Articular Chondrocytes ◽  
Collagen Type I ◽  
Cell Phenotype ◽  
Type I ◽  
Type Ii ◽  
Collagen Type Ii ◽  
Chondrocyte Phenotype

Articular chondrocytes are difficult to grow, as they lose their characteristic phenotype following expansion on standard tissue culture plates. Here, we show that culturing them on surfaces of poly(L-lactic acid) of well-defined microtopography allows expansion and maintenance of characteristic chondrogenic markers. We investigated the dynamics of human chondrocyte dedifferentiation on the different poly(L-lactic acid) microtopographies by the expression of collagen type I, collagen type II and aggrecan at different culture times. When seeded on poly(L-lactic acid), chondrocytes maintained their characteristic hyaline phenotype up to 7 days, which allowed to expand the initial cell population approximately six times without cell dedifferentiation. Maintenance of cell phenotype was afterwards correlated to cell adhesion on the different substrates. Chondrocytes adhesion occurs via the α5 β1 integrin on poly(L-lactic acid), suggesting cell–fibronectin interactions. However, α2 β1 integrin is mainly expressed on the control substrate after 1 day of culture, and the characteristic chondrocytic markers are lost (collagen type II expression is overcome by the synthesis of collagen type I). Expanding chondrocytes on poly(L-lactic acid) might be an effective solution to prevent dedifferentiation and improving the number of cells needed for autologous chondrocyte transplantation.

scholarly journals Salivary Osteocalcin as Potential Diagnostic Marker of Periodontal Bone Destruction among Smokers

Biomolecules ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 380
Author(s):  
Betsy Joseph ◽  
Mukhatar Ahmed Javali ◽  
Mohasin Abdul Khader ◽  
Saad M. AlQahtani ◽  
Amanullah Mohammed
Keyword(s):  
Type I Collagen ◽  
Alveolar Bone ◽  
Diagnostic Marker ◽  
Bone Destruction ◽  
Alveolar Bone Loss ◽  
Youden Index ◽  
Type I ◽  
Healthy Controls ◽  
Pocket Depth ◽  
Probing Pocket Depth

The objective of the study was to assess the levels and diagnostic accuracy of salivary osteocalcin (OC), osteonectin (ON), and deoxypyridinoline-containing degradation fragment of the C-terminal telopeptide region of type I collagen (CTX) in adult smokers with periodontal bone destruction. Towards this, ninety systemically healthy patients (groups I: healthy, II: periodontitis with non-smokers, and III: periodontitis with current smokers) were included in the study. The results showed a positive correlation (weak to moderate) was observed for OC, ON, and CTX with probing pocket depth (PPD; r = 0.40, 0.32, and 0.36) and alveolar bone loss (BL; r = 0.58, 0.38, and 0.51) (p < 0.01). Smoker periodontitis was best discriminated from healthy controls using 15.25 ng/mL of OC (AUC: 0.870; 95% CI: 0.757–0.943; YI (Youden Index): 0.693; p < 0.0001). However, with a cut-off of BL at 33.33%, 19.24 ng/mL of salivary OC gave the best discrimination (AUC: 0.809; 95% CI: 0.686–0.900; Se: 80.0%; Sp: 73.47%, and YI: 0.534). A 16.45 ng/mL amount of OC gave excellent discrimination (AUC: 0.811; 95% CI: 0.688–0.901; Se: 92.31%; Sp: 65.22%, and YI: 0.575) among healthy and smoker periodontitis when PD at 6mm was considered as cut-off. Conclusion: The best discrimination between healthy controls and smoker periodontitis was obtained at 15.25 ng/mL of salivary OC.

Archaeological Bone from Macro- to Nanoscale: Heat-Induced Modifications at Low Temperatures

2009 ◽  
Vol 8 ◽  
pp. 157-172 ◽  
Author(s):  
Céline Chadefaux ◽  
Ina Reiche
Keyword(s):  
Electron Microscopy ◽  
Low Temperatures ◽  
Type I Collagen ◽  
Bone Structure ◽  
Heating Temperature ◽  
Global Analysis ◽  
Type I ◽  
Scanning Calorimetry ◽  
Bone Material ◽  
X Ray

The present work focuses on the characterization of structural modifications in bone material induced by heating at low temperatures (90 - 250°C). This is of outmost importance when archaeological bone material is concerned. Changes occurring in the structure of the type I collagen and of the mineral-organic arrangement are especially investigated. This precise characterization required the combination of complementary analytical techniques: Differential Scanning Calorimetry (DSC) for global analysis of the collagen state of conservation, Scanning Electron Microscopy coupled with an Energy Dispersive X-Ray system (SEM-EDX), micro-Proton-Induced X-ray and Gamma-ray Emission (micro-PIXE/PIGE) for chemical analysis of the mineral fraction, Infrared microspectroscopy in attenuated total reflectance mode (micro-ATR-FT-IR) combined with curve-fitting for microscopic investigations and Transmission Electron Microscopy (TEM) on ultrathin sections to characterize the modifications in the mineral/organic interface at nanoscale. New criteria characterizing the effect of a thermal treatment at low temperatures on the bone structure from the macroscopic to the nanoscale were determined. There are namely a broadening of the Haversian canals, the inversion of the turns to -sheet ratio in the collagen structure determined by decomposition of the amide I IR band as well as a shift of amide II IR band position with the heating temperature to lower wavenumbers. At nanoscale, melting of the organic phase and clustering of hydroxyapatite (HAP) bone crystals can be observed. For comparison, unheated archaeological bones have been analyzed in order to test if the heat-induced modification can be distinguished from diagenetic alterations, generally dissolution-recrystallisation processes, in soils.

Heat Treatment Strengthens Human Dentin

2008 ◽  
Vol 87 (8) ◽  
pp. 762-766 ◽  
Author(s):  
M. Hayashi ◽  
E.V. Koychev ◽  
K. Okamura ◽  
A. Sugeta ◽  
C. Hongo ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Stress Intensity ◽  
Type I Collagen ◽  
Type I ◽  
Third Molars ◽  
X Ray Diffraction ◽  
Intensity Factors ◽  
X Ray ◽  
Human Dentin ◽  
Triple Helices

The flexural strength of Type I collagen, the major organic component of human dentin, increases with heat. We hypothesized that human dentin can be strengthened by heating, which may help prevent fracture of non-vital teeth after restoration. Beam-shaped dentin specimens were obtained from the crowns of human third molars. The dentinal tubular orientations were arranged to run parallel or perpendicular to loading surfaces. The flexural and microtensile strengths of dentin in the parallel specimens were 2- to 2.4-fold greater after being heated between 110°C and 140°C for 1 hr. The stress intensity factors at fracture also increased after specimens were heated. The x-ray diffraction analyses suggested that shrinking of the lateral packing of the collagen triple-helices from 14 Å to 11 Å was the probable cause of the strengthening of heated dentin. We conclude that heat treatment strengthens human dentin.

Sphingomyelin Phosphodiesterase 3 Enhances Cytodifferentiation of Periodontal Ligament Cells

2016 ◽  
Vol 96 (3) ◽  
pp. 339-346 ◽  
Author(s):  
S. Miyauchi ◽  
J. Kitagaki ◽  
R. Masumoto ◽  
A. Imai ◽  
K. Kobayashi ◽  
...  
Keyword(s):  
Mrna Expression ◽  
Periodontal Ligament ◽  
Type I Collagen ◽  
Alveolar Bone ◽  
Skeletal Development ◽  
Aggressive Periodontitis ◽  
Periodontal Ligament Cells ◽  
Type I ◽  
Phosphodiesterase 3 ◽  
Pdl Cells

Sphingomyelin phosphodiesterase 3 ( Smpd3), which encodes neutral sphingomyelinase 2 (nSMase2), is a key molecule for skeletal development as well as for the cytodifferentiation of odontoblasts and alveolar bone. However, the effects of nSMase2 on the cytodifferentiation of periodontal ligament (PDL) cells are still unclear. In this study, the authors analyzed the effects of Smpd3 on the cytodifferentiation of human PDL (HPDL) cells. The authors found that Smpd3 increases the mRNA expression of calcification-related genes, such as alkaline phosphatase (ALPase), type I collagen, osteopontin, Osterix (Osx), and runt-related transcription factor (Runx)-2 in HPDL cells. In contrast, GW4869, an inhibitor of nSMase2, clearly decreased the mRNA expression of ALPase, type I collagen, and osteocalcin in HPDL cells, suggesting that Smpd3 enhances HPDL cytodifferentiation. Next, the authors used exome sequencing to evaluate the genetic variants of Smpd3 in a Japanese population with aggressive periodontitis (AgP). Among 44 unrelated subjects, the authors identified a single nucleotide polymorphism (SNP), rs145616324, in Smpd3 as a putative genetic variant for AgP among Japanese people. Moreover, Smpd3 harboring this SNP did not increase the sphingomyelinase activity or mRNA expression of ALPase, type I collagen, osteopontin, Osx, or Runx2, suggesting that this SNP inhibits Smpd3 such that it has no effect on the cytodifferentiation of HPDL cells. These data suggest that Smpd3 plays a crucial role in maintaining the homeostasis of PDL tissue.

Identification of Genes Differentially Regulated in Rat Alveolar Bone Wound Healing by Subtractive Hybridization

2004 ◽  
Vol 83 (7) ◽  
pp. 546-551 ◽  
Author(s):  
T. Ohira ◽  
F. Myokai ◽  
N. Shiomi ◽  
K. Yamashiro ◽  
T. Yamamoto ◽  
...  
Keyword(s):  
Wound Healing ◽  
Connective Tissue ◽  
Type I Collagen ◽  
Alveolar Bone ◽  
Subtractive Hybridization ◽  
Tissue Structure ◽  
Type I ◽  
Expression Of Genes ◽  
Periodontal Healing ◽  
Connective Tissue Structure

Periodontal healing requires the participation of regulatory molecules, cells, and scaffold or matrix. Here, we hypothesized that a certain set of genes is expressed in alveolar bone wound healing. Reciprocal subtraction gave 400 clones from the injured alveolar bone of Wistar rats. Identification of 34 genes and analysis of their expression in injured tissue revealed several clusters of unique gene regulation patterns, including the up-regulation at 1 wk of cytochrome c oxidase regulating electron transfer and energy metabolism, presumably occurring at the site of inflammation; up-regulation at 2.5 wks of pro-α-2 type I collagen involving the formation of a connective tissue structure; and up-regulation at 1 and 2 wks and down-regulation at 2.5 and 4 wks of ubiquitin carboxyl-terminal hydrolase l3 involving cell cycle, DNA repair, and stress response. The differential expression of genes may be associated with the processes of inflammation, wound contraction, and formation of a connective tissue structure.

Coprecipitation of Cell Adhesion Molecule with Calcium Phosphate on Hydroxyapatite Ceramic

2006 ◽  
Vol 309-311 ◽  
pp. 767-770 ◽  
Author(s):  
Yu Sogo ◽  
Yuusuke Ishikawa ◽  
Nao Kondo ◽  
Eiji Uchimura ◽  
Ayako Oyane ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Cell Adhesion Molecule ◽  
Type I Collagen ◽  
Alveolar Bone ◽  
Composite Layer ◽  
Phosphate Solution ◽  
Type I ◽  
Hydroxyapatite Ceramic ◽  
Tooth Roots ◽  
Calcified Tissue

Fibronectin (FN) and type I collagen (Col), which are kinds of extracelluar matrices, were coprecipitated with calcium phosphate to form a composite layer on a hydroxyapatite (HAP) ceramic using a supersaturated calcium phosphate solution (CP solution). The amounts of protein immobilized in the layers were determined to be 20.97±3.04 µg·cm-2 for FN, 5.26±0.19 µg·cm-2 for Col and 21.72±2.30 µg·cm-2 for simultaneously immobilized FN and Col. When osteoblastic MC3T3-E1 cells were cultured on the HAP ceramics with the composite layer containing FN and/or Col, calcified tissue was formed through the activity of the cells. The result showed that the composite layer accelerated the differentiation of MC3T3-E1 to bone-forming cells. It is assumed that osteoblastic cells in alveolar bone migrated and differentiated on the surface of the tooth roots when the artificial tooth roots were covered with the composite layer.

Sign in / Sign up

Export Citation Format

Share Document