scholarly journals Remote PC Wake-On Design Manufacture in Mujahidin Mosque at Candi Mendut

2021 ◽  
Vol 3 (3) ◽  
pp. 113-126
Author(s):  
Rizki Priya Pratama
Keyword(s):  
User Interface ◽  
Electronic Devices ◽  
The Internet ◽  
Android Application ◽  
Turn On ◽  
The Status ◽  
Android Applications ◽  
To Receive ◽  
Internet Network

There are several methods to turn on a PC from other places, one of which is WOL (wake-on lan). This method requires modem configuration to enable WOL and port forwarding features. However, if it is not possible, there is one method offered by the researcher. The method is creating a system that functions to turn on the PC via the MQTT protocol. This system consists of electronic devices and android applications. Both can be connected to the internet network. The function of this device is to connect the PWRBTN and GND pins for 0.3 seconds. While the android application "Remote wake-on PC Masjid Mujahidin" is a user interface to receive and send data to the device. From the experiment, it was found that this device was controlled from the internet with an android application successfully. In addition, there is information about the status of the PC, the system voltage on the device, and the temperature and voltage of the PC room on the android application. All this information is successfully transmitted from the PC-enabled device to the android application. Terdapat beberapa metode untuk menghidupkan PC dari keadaan mati/off,  salah satunya adalah WOL (wake-on lan). Metode ini membutuhkan konfigurasi modem untuk mengaktifkan fitur WOL dan port forwarding. Namun, apabila tidak bisa, terdapat satu metode yang ditawarkan oleh peneliti. Metode tersebut adalah sebuah sistem yang berfungsi untuk menghidupkan PC  melalui protokol MQTT. Sistem ini terdiri dari sebuah perangkat elektronik dan aplikasi android  yang dapat terhubung pada jaringan internet. Perangkat ini bertugas untuk meng-on-kan PC dengan cara menghubungkan pin PWRBTN dan GND selama 0,3 detik. Sedangkan aplikasi android “Remote wake-on PC Masjid Mujahidin” sebagai user interface untuk menerima dan mengirimkan data ke perangkat. Dari pengujian, didapatkan bahwa perangkat ini berhasil dikendalikan dari internet dengan aplikasi android.   Selain itu juga, terdapat  informasi mengenai status PC, tegangan sistem pada alat serta suhu dan tegangan ruang PC pada aplikasi android. Semua informasi ini berhasil dikirimkan dari peralatan wake-on PC ke aplikasi android.

scholarly journals Sistem Kontrol Peralatan Listrik Jarak Jauh Berbasis Arduino

2021 ◽  
Vol 2 (1) ◽  
pp. 61-64
Author(s):  
Nauval Pramana Putra ◽  
Irma Husnaini
Keyword(s):  
Electrical Energy ◽  
Electrical Equipment ◽  
The Internet ◽  
Android Application ◽  
Turn On ◽  
Electrical Appliance ◽  
Internet Network

The need for electrical energy is vital because electrical equipment generally uses electricity as the main energy. Electricity is energy that comes from petroleum which must be saved in its use. To save electricity usage, it is necessary to use electricity as efficiently as possible by not allowing this energy to be wasted. This paper aims to design an application for controlling electrical equipment remotely using the internet network. This tool uses Esp8266 as a link with the internet network, and uses applications on Android as a controlling media. When esp8266 is connected to the internet network and the on / off button on the android application is pressed, the ac and fan lights will turn on or off according to the button pressed. The results of testing this remote electrical appliance controller are that the tool can work properly turning on or off the lights and fans when connected to the internet without distance restrictions.

scholarly journals SISTEM MONITORING PENGGUNAAN DAYA LISTRIK BERBASIS INTERNET OF THINGS PADA RUMAH DENGAN MENGGUNAKAN APLIKASI BLYNK

2021 ◽  
Vol 7 (1) ◽  
pp. 47-54
Author(s):  
Maria Febrianti Pela ◽  
Rully Pramudita
Keyword(s):  
User Interface ◽  
Electronic Devices ◽  
Electrical Power ◽  
Electrical Energy ◽  
The Internet ◽  
Power Monitoring ◽  
Human Needs ◽  
Interface System ◽  
Internet Network ◽  
At Home

All work and human needs are highly dependent on the presence of electrical energy, especially on household needs. Human negligence in using electrical energy will cause waste in the use of electrical energy which causes soaring payments among households. This study aims to examine the application of monitoring the electrical power used in the connection of these devices remotely via the internet. The system can be implemented using NodeMCU ESP8266, PZEM-004T sensor, Liquid Crystall I2C, and the Blynk application as a user interface system on a smartphone. To be able to monitor through the Blynk application, the user must be connected to the internet and the microcontroller must be connected to the internet network. This system using the internet network will make it easier to monitor electrical power in electronic devices at home every day. The results of this study are the prototype of the electrical power monitoring system using the Blynk application can help and facilitate homeowners in monitoring electrical power when the homeowner is not at home.

scholarly journals Sistem Pengontrolan Lampu Gedung STMIK AMIK Riau Berbasis IoT (Internet Of Things)

2018 ◽  
Vol 3 (2) ◽  
pp. 131
Author(s):  
Rometdo Muzawi ◽  
Wahyu Joni Kurniawan
Keyword(s):  
Internet Of Things ◽  
Current Trend ◽  
Control Process ◽  
Internet Technology ◽  
Raspberry Pi ◽  
The Internet ◽  
Lighting Control ◽  
Turn On ◽  
Security Officers ◽  
Internet Network

Internet of Things, also known as abbreviation IoT, is a hardware device (Raspberry Pi) that can connect to the internet with the aim of expanding the internet network connected to the hardware. The development of the Internet of things is a 4.0 technological revolution which is again the current trend. One of the uses of IoT technology is controlling room lights through an internet network that is controlled via a smartphone that can be operated remotely anywhere and anytime. But so far the control of the lights at STMIK Amik Riau is still done manually where security officers approach the swish button to turn on the lights. Therefore it is necessary to design a device that can control electronic equipment (lights) in real time. Where this study aims to build remote-controlled devices by utilizing internet technology to carry out an Internet of Things (IoT) based light control process. This research was conducted by building a prototype with python and mobile based programming applications. In this study there is a room lighting control feature with the first condition that one lamp is used to turn on a lamp and the second condition is used to turn on the lights simultaneously and coupled with camera modules to monitor the condition of the room

scholarly journals The Effect of Pre Order Online Sales to Company Profits on PT. Aventama Hervent Solusindo Bandung

2020 ◽  
Vol 1 (3) ◽  
pp. 88-92
Author(s):  
Tiris Sudrartono
Keyword(s):  
Regression Analysis ◽  
Linear Regression ◽  
Linear Regression Analysis ◽  
Electronic Devices ◽  
Production Costs ◽  
The Other ◽  
The Internet ◽  
Simple Linear Regression ◽  
Online Sales ◽  
Internet Network

This research aims to find out how online pre order sales and profit earning on PT Aventama, also how big is the effect of pre order online sales towards the profit on PT Aventama, and to get to know about what are the efforts that could be able to do for increase the company profits through online pre order sales. Theory that supports in this research was revealed by Oki Pamungkas, 2018 who said that online sales is  conducting sales activities from looking for potential buyers to offering products or goods by utilizing the internet network that is supported by a set of electronic devices as a link to the internet network, while Toto Prihadi 2012 said that profit is a measure of company's performance obtained from the results of reduction results of sales minus production costs. From conducted research, it can be obtained of the results of online pre order sales and company profits on PT Aventama, it's obtained results of 77.2% for online pre order sales and 35.7% for the profits and are categorized well. Then the correlation test is used for find out about the effect of online pre order sales with the results obtained at 84%, this value can be interpreted that the effect of online pre order sales to profits is very strong, while the other 16% is effected by other factors that it’s not examined by the author. Based on a simple linear regression analysis obtained Y '= 3.307 + 0.420X it means every online pre order sale is improved, it will be followed by an improve in company profit of 0.420 at a constant 3.037. With this research, it's expected that there will be a change in the company's profit through increasing online pre-order sales by creating advertisements, providing more complete ready stock products, and adding new suppliers so that the ordering process of products is faster to consumers

scholarly journals PROTOTYPE PENGENDALIAN LAMPU DAN AC JARAK JAUH DENGAN JARINGAN INTERNET MENGGUNAKAN APLIKASI TELEGRAM BERBASIS NODEMCU ESP8266

2021 ◽  
Vol 7 (1) ◽  
pp. 27-34
Author(s):  
Akip Maulana Ibrahim ◽  
Didik Setiyadi
Keyword(s):  
Internet Of Things ◽  
Control Process ◽  
Network Connectivity ◽  
Control Device ◽  
Global Network ◽  
The Internet ◽  
Air Conditioners ◽  
Turn On ◽  
The Internet Of Things ◽  
Internet Network

Internet of Things (IoT) is a concept with the aim of expanding internet network connectivity that is connected to a global network. The Internet of Things (IoT) can be used to remotely control electronic devices such as lights and air conditioners via the internet. This study aims to create a control device that utilizes internet network technology and uses the telegram application to carry out the control process. There are four control features, namely lamp control which is used to turn on one lamp, the second feature is overall lamp control to turn on all lamps at one time, the third feature controls turning on and off the AC, the fourth feature can monitor lamps and the AC is on or off . The research method used in the manufacture of this control device is the Prototype method, which is considered very suitable for use and this device uses the nodeMCU ES8266 microcontroller. The results of this study are the use of Telegram can help and facilitate users or users in monitoring and controlling lights and air conditioners when not in the house.

scholarly journals A COMPARISON OF CREATING AN ANDROID APPLICATION USER INTERFACE IN XAML AND IN C# CODE

2021 ◽  
Vol 2 ◽  
pp. 52-62
Author(s):  
Igor Košťál ◽  
Martin Mišút
Keyword(s):  
User Interface ◽  
User Interfaces ◽  
Execution Time ◽  
Android Application ◽  
Development Environment ◽  
Source Codes ◽  
Advantages And Disadvantages ◽  
C Programming Language ◽  
C Programming ◽  
Android Applications

Almost every Android user application has some kind of user interface. Android programmers who create Xamarin.Forms applications and who uses the Microsoft Visual Studio development environment to do so can create user interfaces in the XAML (the Extensible Application Markup Language) or in the C# programming language. This paper deals with a comparison of creating this user interface by the first and the second way. We demonstrate the differences in the creation of Android application user interfaces in XAML and in C# by way of using two of our Android applications which were created by the Microsoft Visual Studio 2019 Enterprise, which work as text editors with the ability to store text to disc, and have user interfaces that are visually identical. However, the user interface of the first Android application was created in XAML with a C# support code, whereas the user interface of the second Android application was created entirely in C#. While comparing the source codes of the user interfaces of both these Android applications, we identify the advantages and disadvantages of both approaches to creating a user interface and we try to find out which of these approaches is better for maintaining and modifying user interfaces. In this study, we also contrast the processes of handling events of controls of a user interface created in the XAML code for the first Android application as well as that of the same user interface created in the C# code for the second Android application. Furthermore, we were interested in determining whether the different ways of creating user interfaces affected the execution time of basic operations that included disc files that were performed on the same data by both the applications. We assume that it does not fundamentally affect the execution time, and so, we performed an experiment to confirm or refute our assumption.

scholarly journals ANALISIS PEMANTAUAN LAN MENGGUNAKAN METODE QoS DAN PENGKLASIFIKASIAN STATUS JARINGAN INTERNET MENGGUNAKAN ALGORITMA NAIVE BAYES

2018 ◽  
Vol 4 (2) ◽  
Author(s):  
Sachin Sabloak ◽  
Jasuandi Wijaya ◽  
Abdul Rahman ◽  
Molavi Arman
Keyword(s):  
Quality Of Service ◽  
Naive Bayes ◽  
Naïve Bayes ◽  
The Internet ◽  
Data Set ◽  
Computer Laboratory ◽  
The Status ◽  
Bayes Algorithm ◽  
Internet Network

[Id]Pentingnya jaringan komputer pada kehidupan sekarang, perlu adanya kestabilan jaringan komputer yang digunakan. Pemantauan kualitas jaringan internet didalam sebuah jaringan LAN dilakukan network administrator untuk mendapatkan nilai dari data yang didapat, penelitian ini menerapkan algoritma Naive Bayes menggunakan dataset TIPHON dengan parameter yang terdapat dalam metode QoS yaitu delay, packetloss dan jitter untuk memonitor kualitas jaringan internet. Metode QoS akan menghasilkan nilai dari setiap parameter yang dibutuhkan untuk pemantauan jaringan, guna mendapatkan kesimpulan mengenai status jaringan internet digunakan Algoritma Naive Bayes. Metode Quality of Service (QoS) merupakan sebuah metode yang digunakan dalam mendefinisikan kemampuan suatu jaringan yang ?digunakan untuk pengukuran tentang kualitas ?jaringan. Penggunaan algoritma Naive Bayes diperlukan karena algoritma tersebut digunakan dalam pengklasifikasian yang menggunakan probabilitas dan statistik serta mampu mengambil keputusan dengan menggunakan dataset yang telah disediakan. Tujuan penelitian ini dilakukan untuk mengetahui status jaringan internet di lab komputer STMIK Global Informatika MDP serta mengetahui tingkat akurasi dari algoritma Naive Bayes untuk mengklasifikasikan status jaringan internet. Pengujian penelitian dilakukan di lab komputer STMIK Global Informatika MDP. Hasil pengujian dalam penelitian ini menunjukkan bahwa akurasi Naive Bayes yang didapatkan sebesar 87,78% dan status jaringan internet di lab komputer STMIK Global Informatika MDP masuk ke dalam kategori memuaskan dengan nilai dominan yaitu sebesar 47,78%.Kata Kunci: Naive Bayes, network administrator, Quality of Service (QoS), status jaringan internet.[En]Since computer network is very important nowadays, it needs the stability of the network used. Monitoring the quality of the internet network in LAN is conducted by an administrator to get the value of the data obtained. This research applied Naive Bayes algorithm using TIPHON data set with parameters in QoS method; delay, packetloss and jitter, to monitor the quality of the internet network. QoS method will gain value in every parameter needed for network monitoring. To get a conclusion about the status of the internet network, Naive Bayes algorithm was used. Quality of Service (QoS) method is a method used to define the ability of a network to measure its quality. Naive Bayes algorithm is needed since the algorithm is used in classifying using probability and statistic as well as making decision using dataset provided. This research is conducted to see the status of the internet network in STMIK Global Informatika MDP computer laboratory and to know the level of accuracy of Naive Bayes algorithm to classify the status of the network. The research was conducted in STMIK Global Informatika MDP computer laboratory. The result of the research showed that the accuracy of Naive Bayes was 87,78% and the status of the internet network STMIK Global Informatika MDP was in the category of satisfactory with dominant value 47,78%.

scholarly journals CONTROL SYSTEMS OF LEVEL BUILDING LIGHT BASED ON ARDUINO AND ANDROID VIA BLUETOOTH WITH MIT INVERTOR

Tibuana ◽  
2019 ◽  
Vol 2 (01) ◽  
pp. 50-57
Author(s):  
Winarno Fadjar Bastari
Keyword(s):  
Control System ◽  
Control Systems ◽  
Human Activities ◽  
Electronic Devices ◽  
Android Application ◽  
Communication Tool ◽  
Home Appliances ◽  
Android Applications ◽  
Mobile Smartphone ◽  
Level Building

The automatic home control system is currently one of the interesting discussions to be developed, there are many innovations that can be done to facilitate human work in controlling the tools contained in the house. One of them is the use of android for controlling the tools that are inside the house and MIT Invertor is a software for making android applications with a design designed according to the design of the house. The control of home appliances / electronic devices that are often used nowadays are many that are integrated with mobile / smartphone devices. This study aims to design an automated home control system that can facilitate human activities in the home such as turning on and off lights and other electronics by using Android devices as a controller and using the HC-05 bluetooth module as a communication tool. The results of this study can show that the Android application can replace the function of the switch for controlling home appliances.

scholarly journals Development of IoT-Based Lighting Installation Practicum Module

2022 ◽  
Vol 8 (2) ◽  
pp. 164
Author(s):  
Ahmad Mukhaidir Shidiq ◽  
Purwito Purwito ◽  
Ruslan Ruslan
Keyword(s):  
Internet Of Things ◽  
Electronic Devices ◽  
Smartphone Application ◽  
The Internet ◽  
Sensor Reading ◽  
Turn On ◽  
Current Voltage ◽  
Power And Energy ◽  
The Internet Of Things ◽  
Data Reading

With the advancement of technology today, there is known to be an innovation that is the internet of things where electronic devices can be monitored and controlled remotely. For this reason, the practicum module of internet of things-based lighting installation as a medium of learning for students. The workings of the tool will be made using the PZEM-004T sensor as a sensor reading the current voltage, power, and energy used and ESP-32 as an additional module on the Arduino Mega so that data reading voltage, current and power can be sent using the internet network to the smartphone. In the smartphone application, we can also control to extinguish or turn on the lights.

scholarly journals PRINCIPAIS DESAFIOS DAS CIDADES BRASILEIRAS E ALTERNATIVAS OPORTUNIZADAS PELA INTERNET DAS COISAS

2020 ◽  
Vol 11 (1) ◽  
pp. 39-51
Author(s):  
Deuzilene Braga Santana ◽  
Vivianni Marques Leite dos Santos
Keyword(s):  
Decision Making ◽  
Internet Of Things ◽  
Electronic Devices ◽  
The Other ◽  
The Internet ◽  
Systematic Mapping ◽  
Practical Applications ◽  
Other Hand ◽  
The Internet Of Things ◽  
Internet Network

The Internet of Things (IoT) is a technology that encompasses electronic devices that have embedded technologies, sensors and connection to the Internet network, capable of collecting, processing, transmitting data and sharing information among each other, in order to transform data into information for decision making. On the other hand, there are still urban challenges facing cities where IoT can contribute. Aiming to support this theme, this study developed a systematic mapping of the literature on IoT and the main challenges faced by Brazilian cities, pointing out existing initiatives and alternatives of how IoT can help to solve them. The results showed evidence of practical applications on the use of IoT as a solution to the challenges in the cities. In addition, these results suggest the feasibility of using IoT in the solution of these problems.  

Sign in / Sign up

Export Citation Format

Share Document