scholarly journals Energy balance formation of sub-eutectoide fayalita at high pressures in particle separators

Athenea ◽  
2022 ◽  
Vol 2 (6) ◽  
pp. 28-42
Author(s):  
Alberto Echegaray
Keyword(s):  
Energy Balance ◽  
Chemical Engineering ◽  
High Pressures ◽  
Control Volume ◽  
Mechanical Energy ◽  
Water Injection ◽  
Solid Particles ◽  
Wash Water ◽  
Conservation Of Energy ◽  
Institute Of Technology

This article presents an approach to the problem of ceramic types adhesion, applying energy and matter balance to the established control volume (cyclone) with the use of mathematical formulas that are interrelated to develop mathematical calculations and establish a new mathematical model The first results are obtained by operating the energy balance considering the collision of particles, using the principle of conservation of energy, the first law of thermodynamics, in order to obtain information that allows describing the phenomena of thermoplasticity and creep, in the formation of adhesions, from a physicochemical and kinetic point of view, which will serve as the basis for understanding their effect. As a result, an energy value of 660 kJ / mol was obtained, sufficient energy to start the transformation of the solid particles to a state of thermo-flow that allows the adhesion phenomenon to be started. Keywords: Adhesion, energy balance, cyclones, elutriation, eutectoid, fayalite, thermoplasticity. References [1]O. Bustamante. “Dissipation of mechanical energy in the discharge of a hydrocyclone”. (Dyna, Ed.) The network of Scientific Journals of Latin America, the Caribbean, Spain, and Portugal, vol. 80 (181), Pages 136-143, 2013. [2]K.Petersen, P.Aldrich, and D.Van.,”Hydrocyclone underflow monitoring using image processing methods. Minerals Engineering”, pp. 301-315,1996. [3]M. Farghaly,” Controlled Wash Water Injection to the hydrocyclone underflow” [Ph.D. Thesis]. Erlangen, FAU, 2009. [4]M, Schneider, and T. Neesse. “Overflow-control system for a hydrocyclone battery. Int. J. Miner. Process". 74, pp. 339 – 343, 2004. [5]J.Bergström., “Flow field and fiber fractionation studies in hydro cyclones” [Ph.D. Thesis] Stockholm, Sweden, Royal Institute of Technology, 2006. [6]C, Liu, L. Wang, and Q. Lui., “Investigation of energy loss mechanisms in cyclone separators”. Chemical Engineering Technology 28, pp. 1182-1190, 2005. [7]O.Dam. & E.Jeffes.,.”Model for detailed assessment of chemical composition of reduced iron ores from single measurement”. Ironmaking and Steelmaking, 1987. [8]E. Ringdalen., “Softening and melting of SiO2 an important parameter for reactions with quartz in Si production” pp 43-44, 2016.

scholarly journals Energy analysis of transfer processes and their main characteristics in thermo mechanical damping systems

2021 ◽  
Vol 5 (3) ◽  
Author(s):  
Ihor Nochnichenko ◽  
Oleg Jakhno
Keyword(s):  
Energy Dissipation ◽  
Energy Balance ◽  
Total Energy ◽  
Shock Absorber ◽  
Energy Analysis ◽  
Mechanical Energy ◽  
Similarity Criteria ◽  
Conservation Of Energy ◽  
Transfer Processes ◽  
The Law

The article discusses the energy analysis of transfer processes in the damping system. The basic theoretical foundations based on the equations of the energy balance of the hydraulic shock absorber and the law of conservation of energy are presented. The proposed approach is associated with the development of a methodology and scheme for calculating the technical system of vibration damping. The schemes of interaction of the system through the phenomena of transfer and functioning of the vibration protection system with the environment are presented. It is shown that damper systems are based on the physical process of transformation of mechanical energy into thermal energy with subsequent dissipation into the environment. The total energy distribution in damping problems takes the following form the mechanical energy of motion is absorbed due to the hydraulic resistance of the liquid and turns into a dissipative component, which can reach 80% of the total energy. A mathematical model of the law of conservation of energy is presented which includes a dissipative function. The analysis of how it is possible to design work processes in a shock absorber due to energy dissipation and similarity criteria: Euler, Froude, Reynolds, etc. As a result of physical experiments, it was found that the movement of a fluid in hydraulic calibrated throttles gives rise to cavitation and various physical phenomena and accompanying processes, in which there is a significant change in the energy balance and energy dissipation in non-stationary modes of fluid movement. The dependence of the total power loss of the shock absorber under changing operating conditions, and the diagram of physical processes and energy transformations in the problems of damping, which are in dissipative processes, are given. The article describes the principles that can be used for the design of devices and modules of damper systems of a wide class with the possibility of energy recovery and accumulation by introducing a damper into the system, for example, a motor generator, an inductor with permanent magnets or a peso element in the design of a traditional telescopic shock absorber.

A New Calculation Approach to the Energy Balance of a Gas Turbine Including a Study of the Impact of the Uncertainty of Measured Parameters

2005 ◽  
Author(s):  
Helmer G. Andersen ◽  
Pen-Chung Chen
Keyword(s):  
Energy Balance ◽  
Gas Turbine ◽  
Control Volume ◽  
Ambient Air ◽  
Energy Balance Equation ◽  
Inlet Temperature ◽  
Exhaust Gas ◽  
Gas Composition ◽  
Intake Flow ◽  
The Impact

Computing the solution to the energy balance around a gas turbine in order to calculate the intake mass flow and the turbine inlet temperature requires several iterations. This makes hand calculations very difficult and, depending on the software used, even causes significant calculation times on PCs. While this may not seem all that important considering the power of today’s personal computers, the approach described in this paper presents a new way of looking at the gas turbine process and the resulting simplifications in the calculations. This paper offers a new approach to compute the energy balance around a gas turbine. The energy balance requires that all energy flows going into and out of the control volume be accounted for. The difficulty of the energy balance equation around a gas turbine lies in the fact that the exhaust gas composition is unknown as long as the intake flow is unknown. Thus, a composition needs to be assumed when computing the exhaust gas enthalpy. This allows the calculation of the intake flow, which in turn provides a new exhaust gas composition, and so forth. By viewing the exhaust gas as a flow consisting of ambient air and combusted fuel, the described iteration can be avoided. The study presents the formulation of the energy balance applying this approach and looks at the accuracy of the result as a function of the inaccuracy of the input parameters. Furthermore, solutions of the energy balance are presented for various process scenarios, and the impact of the uncertainty of key process parameter is analyzed.

A Model for the Effect of Velocity on Erosion of N80 Steel Tubing due to the Normal Impingement of Solid Particles

1992 ◽  
Vol 114 (1) ◽  
pp. 54-64 ◽  
Author(s):  
D. P. Chase ◽  
E. F. Rybicki ◽  
J. R. Shadley
Keyword(s):  
Solid Particle ◽  
Computational Study ◽  
Target Material ◽  
Target Surface ◽  
American Petroleum Institute ◽  
Solid Particles ◽  
Unknown Coefficient ◽  
Conservation Of Energy ◽  
Carrier Fluid ◽  
Erosion Behavior

As part of a combined experimental and computational study of erosion for gas and oil production conditions, a semi-empirical model has been developed to predict erosion ratio behaviors of metals due to solid particle impingement. One use of the model will be to reduce the total number of experiments needed to characterize erosion behavior. The model represents material property information associated with both the target material and the impinging particles, as well as impingement speed. Five different models are examined in terms of ability to predict erosion ratio behavior as a function of impingement speed. The model selected is based on a conservation of energy formulation and fracture mechanics considerations to predict the amount of material removed due to solid particle impingement. The resulting equation to predict the erosion ratio for a given particle size contains one unknown coefficient which is determined through comparison with experimental data. Illustrative examples are presented for data for two different sizes of glass bead solid particles in an oil carrier fluid impinging on an API (American Petroleum Institute) N80 grade steel target at an impingement angle 90 deg to the target surface. Using erosion data at one impingement speed to determine the unknown coefficient, the model was used to predict erosion behavior at a range of other speeds. Good agreement between the erosion ratio data and the values predicted by the model were found for two solid particle sizes. Recommendations for expanding the capabilities of the model are pointed out.

Technical condition of agricultural machinery

2021 ◽  
pp. 53-61
Author(s):  
A. A. Solomashkin ◽  
M. N. Kostomakhin
Keyword(s):  
Energy Balance ◽  
Object Oriented ◽  
Technical Condition ◽  
Object Oriented Programming ◽  
Agricultural Machinery ◽  
Working Capacity ◽  
Conservation Of Energy ◽  
Basic Functions ◽  
The Law ◽  
Expanded Concept

Two basic functions of the machine, consumer and technical are given. Application the law of conservation of energy is shown in case of the description of an energy balance of an element of the machine. The expanded concept of technical condition in relation to the machine is this, parameters of technical condition are justified. Communications of technical condition with operability and working capacity and also communication of operability of an element of the machine with its efficiency are defined. The possibility of representation of technical condition in the form of сlass in object-oriented programming is revealed.

THERMAL CONTROL OF MECHANOCHEMICAL REACTION

2021 ◽  
pp. 3-10
Author(s):  
Yu. Tolchinsky ◽  
V. Ved ◽  
I. Rofe-Beketova
Keyword(s):  
Heat Exchange ◽  
Block Diagram ◽  
Mechanical Energy ◽  
Thermal Control ◽  
Solid Particles ◽  
Mechanochemical Reaction ◽  
Flow Mode ◽  
Stress Concentrations ◽  
Reaction Heat ◽  
Crushed Material

Mechanochemistry studies and explains the processes of chemical and physicochemical transformations that are generated by mechanical action on a substance. When carrying out deep mechanochemical transformations, as a rule, it is necessary to transfer to solid reagents a portion of energy comparable to the energy of interatomic bonds. For this, various machines and apparatus are used, such as extruders, in which mechanical energy is constantly transferred to the crushed material. The article discusses the interaction of two reagents in a simple chemical reaction in the state of a mixture of particles of two types, which occurs during compression of particles having a rough irregular shape, and colliding with each other, forming areas of contact. Significant stress concentrations and heating of the substance with the formation of a new phase arise in these regions. Thermal control of the mechanochemical reaction is to maintain an optimal balance of dissipative heat and heat from the coolant in the worm reactor so that the rate of flow and the final product of the reaction meet the specified specifications. The formulas provided in the article for calculating the coefficient of the rate of mechanochemical reaction, heat transfer between worm reactor and jacket channel, heat exchange between jacket and environment allows to calculate the balance conditions for thermal management. The block diagram of the technological line, which is presented in the article, is more economical in comparison with carrying out the same reaction in a solvent. The economic benefit lies in the elimination of the steps of introducing and removing the solvent from the reaction product. At the end, it is indicated that the mechanochemical reaction of the transformation of a mixture of two dispersed materials consisting of solid particles into a liquid can be realized in continuous conditions in a flow mode in a worm machine. And thermal control of the course of a mechanochemical reaction can be carried out using controlled heat exchange with a coolant in a jacket under conditions of turn-around spatial dispersion.

scholarly journals Investigating Corrosion Resistance of Heavy-Duty Steel Fasteners Regarding Assemblies Operating in Maritime Climates under High Pressures Power, Metallurgical and Chemical Engineering

2020 ◽  
pp. 94-106
Author(s):  
K.I. Nedashkovskiy ◽  
A.V. Gulshin ◽  
Yu.M. Averina ◽  
V.A. Naumkina ◽  
V.V. Menshikov ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Grain Refinement ◽  
Chemical Engineering ◽  
High Pressures ◽  
Heavy Duty ◽  
High Temperature Heat Treatment ◽  
Temperature Heat ◽  
Temperature Heat Treatment

The paper presents investigation results and a technology for manufacturing fastener workpieces out of the 07Kh16N6-Sh (07Х16Н6-Ш) steel using high-temperature heat treatment. The steel undergoing our testing was additionally doped with molybdenum, as reflected in the 07Kh16N6M-Sh (07Х16Н6М-Ш) designation, which facilitated grain refinement. We implemented accelerated climate testing of bolts in order to assess the corrosion cracking resistance of 07Kh16N6-Sh (07Х16Н6-Ш), 07Kh16N6M-Sh (07Х16Н6М-Ш) and 13Kh15N4AM3-Sh (13Х15Н4АМ3-Ш) steel fasteners in maritime climates.

scholarly journals The Relativistic and the Hidden Momentum of Minkowski and Abraham in Relativistic Energy Wave

2021 ◽  
Author(s):  
Daniel Cardoso
Keyword(s):  
Angular Momentum ◽  
Orbital Angular Momentum ◽  
Mechanical Energy ◽  
Recent Theory ◽  
Translational Energy ◽  
Angle Of Incidence ◽  
Relativistic Energy ◽  
Conservation Of Energy ◽  
Ignition Device

An analysis of the consistency of the Abraham and Minkowski momenta in the determination of the photon trajectory was carried out considering a new principle of conservation of the photon's mechanical energy, in which the photon conserves translational energy in orbital angular momentum when transiting between two media, introducing the relativistic energy wave (REW). The confrontation between REW and the recent theory of space-time waves (ST) was considered, pondering your differences. Throughout this study it was possible to verify that the Abraham momentum appears a relativistic photon ignition device in the transition between two media, acting as the hidden momentum of the Minkowski’s relativistic momentum. The wavy behavior in the matter is relativistic, and the relativistic trajectory appears with delays and advances, with points of synchronization between source-observer. The classical or relativistic trajectories are determined as a function of the angle of incidence and the relative refractive index, by one of two distinct non-additive torques, the classic by Abraham or the relativistic by Minkowski. It was found that the same analysis conducted under the principle of conservation of the mechanical energy of the photon can be treated by an new Doppler, Relativistic Apparent, that can be confused with other Dopplers in the treatment of redshift from distant sources. It was found that the conservation of energy in Orbital Angular Momentum (OAM), in the interaction with matter, explains that the synchronization instants are found in the inversion of the OAM, where the advances and delays of REW occur under negligible variations of the OAM, however, opposites.

scholarly journals Multi-Station Automated Hand Washing System (MSAHWS)

2020 ◽  
Vol 9 (3) ◽  
pp. 36-43
Keyword(s):  
Control System ◽  
Chemical Engineering ◽  
Hand Washing ◽  
Water Tank ◽  
Computer Engineering ◽  
Washing Machine ◽  
Design And Development ◽  
Prototype Development ◽  
Institute Of Technology ◽  
E Mail

The paper presents a design and development of a multi-station automated hand-washing system (MSAHWS) that could be integrated into overall solution strategies for combating the threat of SARS-Cov-2 infections and minimizing the health and economic devastation the virus spread can inflict. The researchers seek to create a system that uses a single micro-controller and caters to several users, each of them being served independently of each other. The MSAHWS development follows a four-part methodology: formulation of the sanitary, operational, manufacturing and economic requirements; design, modeling, and simulation of the micro-controller-based control system; MSAHWS hardware prototype development; and system test and data collection. The MSAHWS design and development focuses on a double-station system that uses a single Arduino Uno, an ultrasonic sensor for each station, 4 FET’s, 4 liquid pumps, a water tank, a soap reservoir, a power supply and a frame to house the system. The non-contact system eliminates possible viral transmission from one person to another via the hand washing machine yet ensures the required cleanliness of the hands. The system is first simulated in PROTEUS to test its functionality and responses based on the demanded or required criteria. A prototype is then built to test and verify the system’s actual operation and responses and thence to make the necessary adjustment of parameters to realize an acceptable performance level. Tests show that all the requirements are met. Photos of the built and tested prototype, a diagram of the initial system design concept, a screen capture of the control system software model, a schematic diagram of the control system, a sketch with dimensions of the hand washing machine frame or housing, and the flowchart on which the Arduino script is developed. The operation and user-interaction of the actual system is also described. The control system program is written such that the resulting hand washing activity complies with the WHO standard on hand washing duration and makes entirely possible a complete and hygienic hand washing activity with soap and water. The system is envisioned for strategic deployment in public and private areas like public markets, banks, hospitals, schools, offices, residences, and many others. Revised Manuscript Received on August 05, 2020. * Correspondence Author Jolan Baccay Sy, School of Electrical and Computer Engineering, Wollo University, Kombolcha Institute of Technology, Kombolcha Ethiopia. E-mail: [email protected] Marlon Gan Rojo School of Electrical and Computer Engineering, Wollo University, Kombolcha Institute of Technology, Kombolcha Ethiopia. Email: [email protected] Eunelfa Regie Calibara School of Electrical and Computer Engineering, Wollo University, Kombolcha Institute of Technology, Kombolcha Ethiopia. E-mail: [email protected] Alain Vincent Comendador, School of Mechanical and Chemical Engineering, Wollo University, Kombolcha Institute of Technology, Kombolcha, Ethiopia. Email: [email protected] Wubishet Degife School of Mechanical and Chemical Engineering, Wollo University Kombolcha Institute of Technology, Kombolcha, Ethiopia. E-mail: [email protected] Asefa Sisay Yimer Lecturer, Department of Electrical and Computer Engineering, Kombolcha Institute of Technology, Wollo University, Ethiopia. The paper has shown that it is possible to control multiple hand washing stations, each acting independently of each other, using a single micro-controller and a proper control system programming.

scholarly journals On the Relation between Blade Loading and In-Passage Energy Balance

Aerospace ◽  
2021 ◽  
Vol 8 (11) ◽  
pp. 324
Author(s):  
Yinbo Mao ◽  
Ziyu Chen ◽  
Hui Li ◽  
Xinrong Su ◽  
Xin Yuan
Keyword(s):  
Energy Balance ◽  
Flow Field ◽  
Analytical Relation ◽  
Theoretical Derivation ◽  
Flow Angle ◽  
Conservation Of Energy ◽  
Blade Loading ◽  
Starting Point ◽  
Novel Theory ◽  
Potential Applications

This paper presents a novel theory regarding the blade loading and the passage flow field within general turbomachineries. The basic philosophy is to establish an analytical relation between the loading, the flow angle, and the blade geometry based on the conservation of energy. Detailed validations and analyses will be carried out to provide a general scope regarding the theory itself as well as its advantages and limitations in common applications. The paper includes the theoretical derivation of the target relation. The starting point is the standard RANS equations. From that, with the aid of the passage-average operator, the relation between the loading and the passage flow field is derived under the energy balance. Theoretical analyses regarding the validity of the relation are performed based on the simulation results and test data on different cascades. Discussions are conducted regarding the assumption and potential applications of the theory. Conclusions are drawn on the applicability of the theory to introduce its potential applications in general turbomachineries.

Sign in / Sign up

Export Citation Format

Share Document