scholarly journals A Study On Impact Of White Goods Towards consumers Preference

2021 ◽  
Vol 23 (12) ◽  
pp. 300-315
Author(s):  
Dr. S. Vijay ◽  

The market’s level of competition has risen as a result of the advent of the overseas white goods industry. With rising earnings, dual-income families, changing lifestyles, credit availability, greater consumer knowledge, and the introduction of new models by Indian and multinational companies, India’s consumer durable sector is riding the crest of the country’s economic boom. As the Durable market is growing rapidly, an understanding of the consumer behavior regarding the characteristic of consumers in influencing their buying behavior is crucial. Consumer requirements of Air-condition, Washing machine and Refrigerator are at present not limited to its basic function but also on other values like – efficiency, ease of use and comfort. The consumer durables industry is marked by the growth of multinational corporations (MNCs), exchange offers, discounts, and fierce competition. MNCs have a 65 percent market share in the consumer durables industry. The expanding Indian middle class is a major focus for multinational corporations. They compete on the basis of a firm grasp on the local market, well-known brands, and a large distribution network, whereas Indian companies compete on the basis of a firm grasp on the local market, well-known brands, and a large distribution network. Consumer durables penetration, on the other hand, is still low in India. At this juncture, this study has been undertaken for to find out the impact and reality of white goods market in India.

2009 ◽  
Author(s):  
Ding-Mei Cao ◽  
D. Pudjianto ◽  
G. Strbac ◽  
R. Ferris ◽  
I. Foster ◽  
...  

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2205
Author(s):  
Qian Li ◽  
Yujie Li ◽  
Yifan Chen ◽  
Qiang Wu ◽  
Siqun Wang

A novel liquid phosphorous-containing flame retardant anhydride (LPFA) with low viscosity was synthesized from 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and methyl tetrahydrophthalic anhydride (MeTHPA) and further cured with bisphenol-A epoxy resin E-51 for the preparation of the flame retardant epoxy resins. Both Fourier transform infrared spectroscopy (FT-IR), mass spectrometry (MS) and nuclear magnetic resonance (NMR) measurements revealed the successful incorporation of DOPO on the molecular chains of MeTHPA through chemical reaction. The oxygen index analysis showed that the LPFA-cured epoxy resin exhibited excellent flame retardant performance, and the corresponding limiting oxygen index (LOI) value could reach 31.2%. The UL-94V-0 rating was achieved for the flame retardant epoxy resin with the phosphorus content of 2.7%. With the addition of LPFA, the impact strength of the cured epoxy resins remained almost unchanged, but the flexural strength gradually increased. Meanwhile, all the epoxy resins showed good thermal stability. The glass transition temperature (Tg) and thermal decomposition temperature (Td) of epoxy resin cured by LPFA decreased slightly compared with that of MeTHPA-cured epoxy resin. Based on such excellent flame retardancy, low viscosity at room temperature and ease of use, LPFA showed potential as an appropriate curing agent in the field of electrical insulation materials.


Water ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2141
Author(s):  
Stavroula Tsitsifli ◽  
Vasilis Kanakoudis

Disinfection is one of the most important water treatment processes as it inactivates pathogens providing safe drinking water to the consumers. A fresh-water distribution network is a complex system where constant monitoring of several parameters and related managerial decisions take place in order for the network to operate in the most efficient way. However, there are cases where some of the decisions made to improve the network’s performance level, such as reduction of water losses, may have negative impacts on other significant operational processes such as the disinfection. In particular, the division of a water distribution network into district metered areas (DMAs) and the application of various pressure management measures may impact the effectiveness of the water chlorination process. Two operational measures are assessed in this paper: (a) the use of inline chlorination boosters to achieve more efficient chlorination; and (b) how the DMAs formation impacts the chlorination process. To achieve this, the water distribution network of a Greek town is chosen as a case study where several scenarios are being thoroughly analyzed. The assessment process utilizes the network’s hydraulic simulation model, which is set up in Watergems V8i software, forming the baseline to develop the network’s water quality model. The results proved that inline chlorination boosters ensure a more efficient disinfection, especially at the most remote parts/nodes of the network, compared to conventional chlorination processes (e.g., at the water tanks), achieving 100% safe water volume and consuming almost 50% less chlorine mass. DMAs’ formation results in increased water age values up to 8.27%, especially at the remote parts/nodes of the network and require more time to achieve the necessary minimum effective chlorine concentration of 0.2 mg/L. However, DMAs formation and pressure management measures do not threaten the chlorination’s efficiency. It is important to include water age and residual chlorine as criteria when optimizing water pressure and the division of DMAs.


2007 ◽  
Vol 2 (1) ◽  
pp. 76-85
Author(s):  
Booi Hon Kam ◽  
Hernan Riquelme

The advent of Internet has provided banks an opportunity to reduce costs, increase customer base, and mass customize by delivering their products and services through this medium. A flurry of studies on Internet banking (IB) has since emerged. The majority of these studies, however, have been directed to either IB adoption or IB service quality delivery. With few exceptions, the impact that customer satisfaction with e-banking service qualities has on IB usage remains unexplored. This study examines a sample of Australian IB users based on their frequency and length of usage. The results show that as customers become more acclimatized to IB, they use these services more often. Further, daily and frequent IB users are more pleased with “ease of use” and “aesthetics” and tend to use IB more for electronic fund transfer and foreign exchange transactions than the less frequent users. The findings suggest that banks need to develop more customized services since there are distinct market segments with different banking requirements.


Author(s):  
Despoina Schina ◽  
Cristina Valls-Bautista ◽  
Anna Borrull-Riera ◽  
Mireia Usart ◽  
Vanessa Esteve-González

Abstract Purpose This study explores pre-service preschool teachers’ acceptance and self-efficacy towards Educational Robotics (ER) during a university course, and also examines their perceptions of the course. Methodology This is a one-group intervention study with an associational research design that includes both quantitative and qualitative research methods: two pre-questionnaires and two post-questionnaires on pre-service teachers’ acceptance and self-efficacy towards ER, and participants’ training journals. Findings The results show that pre-service teachers’ acceptance and self-efficacy towards ER improved after they completed the ER teacher training course. There was a significant difference between the start and the end of the ER training in the pre-service teachers’ acceptance of ER in the areas of perceived ease of use, enjoyment and attitudes, and in their self-efficacy. The findings based on the training journals show that participants positively evaluated the course. The participants also provided suggestions for improving it, such as additional training sessions, resources and time for experimentation. Value Our study reveals the impact of an ER training program and showcases the importance of integrating ER in pre-service teachers’ education.


Author(s):  
Abdennour Ilyas BENFRIHA ◽  
Lamia TRIQUI-SARI ◽  
Aimed Eddine BOUGLOULA ◽  
Mohammed BENNEKROUF

Energies ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4717 ◽  
Author(s):  
Sylvester Johansson ◽  
Jonas Persson ◽  
Stavros Lazarou ◽  
Andreas Theocharis

Social considerations for a sustainable future lead to market demands for electromobility. Hence, electrical power distribution operators are concerned about the real ongoing problem of the electrification of the transport sector. In this regard, the paper aims to investigate the large-scale integration of electric vehicles in a Swedish distribution network. To this end, the integration pattern is taken into consideration as appears in the literature for other countries and applies to the Swedish culture. Moreover, different charging power levels including smart charging techniques are examined for several percentages of electric vehicles penetration. Industrial simulation tools proven for their accuracy are used for the study. The results indicate that the grid can manage about 50% electric vehicles penetration at its current capacity. This percentage decreases when higher charging power levels apply, while the transformers appear overloaded in many cases. The investigation of alternatives to increase the grid’s capabilities reveal that smart techniques are comparable to the conventional re-dimension of the grid. At present, the increased integration of electric vehicles is manageable by implementing a combination of smart gird and upgrade investments in comparison to technically expensive alternatives based on grid digitalization and algorithms that need to be further confirmed for their reliability for power sharing and energy management.


2016 ◽  
Vol 8 (1) ◽  
pp. 117 ◽  
Author(s):  
The Ninh Nguyen ◽  
Tuan Khanh Cao ◽  
Phuong Linh Dang ◽  
Hien Anh Nguyen

<p>Mobile payment has relative advantages compared to other payment methods, thus providing benefits for both consumers and the society. This study attempts to examine factors influencing consumer intention to use mobile payment services. Survey data are used to investigate the impact of consumers’ perceptions of mobile payment services and social influence on use intention. Empirical evidence from 489 Vietnamese consumers confirms a significant relationship between the factors and behavioral intention, and reveals that perceived trust is the strongest predictor of intention to use mobile payment services followed by perceived ease of use, perceived enjoyment, perceived behavioral control, perceived usefulness and subjective norm, respectively. The results contribute to the evolving literature, and suggest that mobile payment service providers should particularly focus on building up consumer trust, and making their services clear, understandable and easy to use. Future research directions for extending this study are also discussed.</p>


Author(s):  
Michelle A. Pang ◽  
Carolyn C. Seepersad

The evaluation of design concepts is a time consuming and resource intensive process. Crowdsourcing evaluations has been examined in previous work as a means to reduce the need for expert raters, while achieving similar evaluation results. This paper examines the impact of empathically priming novice raters on their evaluation of alternative design concepts. The rating system is based on a pairwise comparison method that requires minimal training of novice raters. In a pilot study the pairwise method for crowdsourcing evaluations is compared with crowdsourced evaluations using non-pairwise rating scales and with the evaluations of expert raters. The primary study incorporates written and empathic priming strategies to determine their impact on novice raters’ evaluation of concepts. Raters are asked to consider several criteria, including novelty, feasibility, clarity (of the concept), usefulness, ease of use, and overall worthiness of further development. Results offer insight into the criteria that are most relevant to novice raters and whether empathic priming has a significant effect on those evaluations.


Sign in / Sign up

Export Citation Format

Share Document