scholarly journals Comparative behaviour of local and exotic chickens in tests of fearfulness, anxiety and cognition

2021 ◽  
Vol 41 (1) ◽  
pp. 4-15
Author(s):  
T. B. Raji ◽  
A. A. Toye
Keyword(s):  
Production System ◽  
Genetic Selection ◽  
Test Results ◽  
Extensive Management ◽  
Quantitative Genetic ◽  
Voluntary Approach ◽  
Ongoing Effort ◽  
Poultry Birds ◽  
Distress Calls ◽  
Two Phases

Behaviour affects performance and productivity of poultry birds especially chickens, some behavioural traits are advantageous in a particular production system and may be of disadvantage in another production system. The present study compared behavioural of Nigeria Local Chicken, NLC (two separate samples of 11 Yoruba Ecotype) and its Exotic counterparts (11 Broilers and 11 Pullets) by use of the Open Field (OFT), T-Maze, Forced Approach, and Voluntary Approach Tests (FAT and VAT respectively) during two phases of Growth (0-4 Weeks, and 4-8 weeks age respectively). The former group (NLC) is better adapted to extensive management in the Nigerian Guinea savannah than the latter Results showed that Yoruba NLC issued a significantly (p<0.05) higher number of distress calls than the Exotic genotypes in the OFT at age 7 and 48 days, and the NLC issued significantly more calls at 7 days age. Broilers exhibited significantly lower OFT Latency at 7 and 48 days, and Broilers traversed fewer squares and spent less time ambulating than other genotypes at 48 days age. Ina T-maze, Broilers showed significantly (p<0.05) lower exploratory behaviour than other groups (higher latency to leave the start box). In the FAT, NLC showed lower Latency to flight (p<0.05) than the Exotic genotypes. Ethological test results indicate differences in the behavioural characters exhibited by Yoruba NLC and Exotic Chickens and such differences could embody the basis of anecdotal differences in the rates of survival under extensive management conditions, and may be subjected to quantitative genetic selection in the ongoing effort to produce improved chickens that incorporate a combination of desirable traits from both Local and Exotic chickens.

Multi-trait selection index and cluster analyses in Angus cattle

2021 ◽  
pp. 1-8
Author(s):  
G. M. Fernandes ◽  
R. P. Savegnago ◽  
L. A. Freitas ◽  
L. El Faro ◽  
V. M. Roso ◽  
...  
Keyword(s):  
Production System ◽  
Selection Process ◽  
Selection Index ◽  
Genetic Selection ◽  
Genetic Profile ◽  
Breeding Values ◽  
Cluster Analyses ◽  
Scrotal Circumference ◽  
Breeding Programmes ◽  
Economic Selection

Abstract In breeding programmes, the genetic selection process is based on the prediction of animal breeding values, and its results may vary according to the employed selection method. The current study developed an economic selection index for animals of the Angus breed; performed cluster analyses using the breeding values in order to evaluate the genetic profile of the animals candidates to selection, and compared the obtained results between the economic selection index and the cluster analyses. The evaluated traits included weaning weight, 18-month weight, scrotal circumference, fat thickness and ribeye area. Economic values were obtained using bioeconomic modelling, simulating a complete cycle production system of beef cattle breeds in Brazil, and the selection objective were the weaning rate and slaughter weight. The chosen selection index was composed of all of the traits used as selection criteria for the simulated production system. During the cluster analyses, the population was divided into two to four groups, in which the groupings containing potential animals were assessed. The animals of the grouping which was used for comparison with the selection index were identified, and most of the bulls that were included in the index were among the best in the analysed group. These results suggest that the cluster analyses can be used as a tool for the selection of animals to be used as parents for future generations.

scholarly journals The Flipside of Eradicating a Disease; Human African Trypanosomiasis in a Woman in Rural Democratic Republic of Congo: A Case Report

2019 ◽  
Vol 4 (4) ◽  
pp. 142 ◽  
Author(s):  
Junior Mudji ◽  
Jonathan Benhamou ◽  
Erick Mwamba-Miaka ◽  
Christian Burri ◽  
Johannes Blum
Keyword(s):  
Case Report ◽  
Sleep Disorder ◽  
Human African Trypanosomiasis ◽  
Democratic Republic Of Congo ◽  
Disease Diagnosis ◽  
Tsetse Flies ◽  
Test Results ◽  
African Trypanosomiasis ◽  
Laboratory Test Results ◽  
Two Phases

Human African Trypanosomiasis (HAT) is a neglected disease caused by the protozoan parasites Trypanosoma brucei and transmitted by tsetse flies that progresses in two phases. Symptoms in the first phase include fever, headaches, pruritus, lymphadenopathy, and in certain cases, hepato- and splenomegaly. Neurological disorders such as sleep disorder, aggressive behavior, logorrhea, psychotic reactions, and mood changes are signs of the second stage of the disease. Diagnosis follows complex algorithms, including serological testing and microscopy. Our case report illustrates the course of events of a 41-year old woman with sleep disorder, among other neurological symptoms, whose diagnosis was made seven months after the onset of symptoms. The patient had consulted two different hospitals in Kinshasa and was on the verge of being discharged from a third due to negative laboratory test results. This case report highlights the challenges that may arise when a disease is on the verge of eradication.

Submerged Production System—A Final Report

1980 ◽  
Vol 102 (1) ◽  
pp. 30-34
Author(s):  
J. A. Burkhardt ◽  
T. W. Childers ◽  
R. E. Anderson ◽  
W. D. Loth ◽  
T. W. Michie
Keyword(s):  
Deep Water ◽  
Production System ◽  
Commercial Application ◽  
Final Report ◽  
Pilot Test ◽  
Test Results ◽  
Well Completion ◽  
Adequate Quality ◽  
Equipment Manufacture ◽  
Processing And Storage

The offshore pilot test of Exxon’s Submerged Production System (SPS) has reached a successful conclusion. This pilot test encompassed the entire spectrum of SPS equipment, spanning from the well completion intervals to, but not including, common surface processing and storage facilities. Since the SPS is designed to meet all the life cycle needs of a subsea field, one of the objectives of the pilot test was to evaluate both the techniques and the equipment used to install, operate, and maintain a prototype version of the SPS. The equipment under test was designed for use in water depths up to 2000 ft, but with minor modifications it is capable of operating in significantly greater depths. Evaluation of pilot test results has shown that the deep water installation techniques are practicable and that the deep water maintenance machinery is competent to repair any failures likely to occur in an operating system. One of the most significant problems in conducting the pilot test was achieving adequate quality control during equipment manufacture. The test results have demonstrated that, with relatively minor modifications, the SPS is suitable for commercial application.

A study on fiber-reinforced elastomer with a biphasic loading behavior

2012 ◽  
Vol 19 (4) ◽  
pp. 339-345
Author(s):  
Hao Huang ◽  
Chee-Ryong Joe ◽  
Dong-Uk Kim ◽  
Jehyun Lee ◽  
Heekyu Choi
Keyword(s):  
Fiber Length ◽  
Solid Mechanics ◽  
Rubber Matrix ◽  
Test Results ◽  
Fiber Reinforced ◽  
Physically Based ◽  
Nonlinear Solid Mechanics ◽  
Two Phases ◽  
Dominant Phase ◽  
Soft Elastomer

AbstractA specific fiber-reinforced elastomer (FRE) composite was formed by inserting curved fibers into a rubber matrix. This material combined the hyperelastic behavior of a soft elastomer matrix with the high stiffness character of a fibrous reinforcement. A biphasic loading property could be realized physically. Based on the guided concept, experiments were performed on the specimens of pure and fiber-reinforced silicone rubber, respectively. Test results showed that this FRE composite first experienced an elastomer-dominant phase with a large recoverable deformation and then a fiber-dominant phase with rapid increasing loading. This biphasic behavior of the developed FRE composite was also identified by the constitutive equations based on the nonlinear solid mechanics. It was further discovered that the division of the two phases could be varied with the change of curved fiber length.

Performance Test Results of Mock-up Test Facility of HTTR Hydrogen Production System

2004 ◽  
Vol 41 (3) ◽  
pp. 385-392 ◽  
Author(s):  
Hirofumi OHASHI ◽  
Yoshitomo INABA ◽  
Tetsuo NISHIHARA ◽  
Yoshiyuki INAGAKI ◽  
Tetsuaki TAKEDA ◽  
...  
Keyword(s):  
Hydrogen Production ◽  
Production System ◽  
Performance Test ◽  
Test Facility ◽  
Test Results

Testing quantitative genetic selection theory with the mouse: A review

2005 ◽  
Vol 2005 ◽  
pp. 238-238
Author(s):  
E. J. Eisen
Keyword(s):  
Genetic Selection ◽  
Selection Response ◽  
Farm Animals ◽  
Base Population ◽  
Selection Theory ◽  
Quantitative Genetic ◽  
Selection Experiments ◽  
Downward Bias ◽  
Dynamic Population ◽  
Good Agreement

The theory of quantitative genetics is used to predict certain outcomes in a dynamic population undergoing selection. The goal of this review is to demonstrate the value of the mouse as a model to test quantitative genetic selection theory.Heritablity estimates in a base population are used to predict selection response. How good is this prediction? Sheridan (1988) reported discrepancies between predicted and realized heritabilities in selection experiments with laboratory and farm animals. An updated summary of single-trait selection experiments for different traits in mice indicates good agreement between predicted and realized heritabilities (r = 0.81, P < 0.01), with no suggestion of upward or downward bias in the base estimates (Eisen, 2005).

The Rationale for Update of S-N Curves for Single Sided Girth Welds for Risers and Pipelines in DNV GL RP C-203 Based on Fatigue Performance of More Than 1700 Full Scale Fatigue Test Results

2018 ◽  
Author(s):  
Agnes Marie Horn ◽  
Inge Lotsberg ◽  
Oddvin Orjaseater
Keyword(s):  
Deep Water ◽  
Fatigue Testing ◽  
Fatigue Loading ◽  
Full Scale ◽  
Fatigue Performance ◽  
Test Results ◽  
Severe Fatigue ◽  
Adequate Quality ◽  
Two Phases ◽  
Girth Welds

Deep-water tendon and riser systems are often subjected to severe fatigue loading from waves, currents and vessel movements. The girth welds between successive lengths of pipe or at pipe terminations represent fatigue-critical features where failure would be catastrophic. Hence, validation fatigue testing by full scale pipes of the most critical welds are often performed to ensure adequate quality and/or to document a better S-N curves than those available in standards today like DNVGL-RP-C203 [1] and BS7608 [2]. To better understand the fatigue performance with respect to identify trends, dependencies and critical features that influence the fatigue performance, a JIP on Fatigue of Girth Welds were initiated in 2011. Two phases have been conducted and a total of 1700 full scale one sided girth welds, mostly run by Stress Engineering, have been statistically analyzed. The test data has been interrogated to investigate the effect of as-welded condition, OD ground, OD/ID ground, un-reeled pipe, reeled pipe, thickness and effect of misalignment. Based on these analyses, new S-N curves for risers and pipelines have been included in DNVGL-RP-C203 for non-reeled girth welds. This paper presents the findings and trends from the JIP work which has been the rationale for the updates of girth welds in section 2.10 in DNVGL-RP-C203 2016 edition.

scholarly journals UTILIZATION OF LEMONGRASS EXTRACT (CYMBOPOGON CITRATUS) AGAINST THE ANTIOXIDANT CONTENT AND SENSORY PROPERTIES OF DARK CHOCOLATE PRODUCTS

2019 ◽  
Vol 10 (2) ◽  
pp. 80
Author(s):  
Amelya Eka Pratiwy ◽  
Intan Kusumaningrum ◽  
Aminullah Aminullah
Keyword(s):  
Antioxidant Activity ◽  
Chemical Properties ◽  
Dark Chocolate ◽  
Antioxidant Compounds ◽  
Test Results ◽  
Second Stage ◽  
Antioxidant Content ◽  
Organoleptic Characteristics ◽  
Chocolate Product ◽  
Two Phases

The use of lemongrass extract on dark chocolate products is a diversification of processed chocolate products to increase the antioxidant content and sensory pofile. This research aims to study the effect of comparison chocolate and spice extracts, interaction chocolate and spice extracts comparison of lemongrass to antioxidant compounds and organoleptic characteristics, and to know the chemical properties of selected products. This study consisted of two phases: the first stage is to prepare lemongrass extract with the steam distillation method, the second stage is to make products that include chocolate melting, mixing and molding, then antioxidant tests and organoleptic to determine the selected products with quality sensory tasts and hedonic tests/preferences, chocolate product selected test chemical (moisture, ash, fat, protein, carbohydrate, and calories). The results of the study by testing the antioxidant different uses of chocolate on antioxidant components showed couverture chocolate types have a higher %inhibition compared to the chocolate kind of compound, the higher the addition of lemongrass extract, the higher antioxidant activity, in the organoleptic tests showed significantly different the parameters of aroma, taste and after taste, but not significantly different from the parameters of melt, interactions between different types of chocolate use, as well as the ratio of chocolate and lemongrass extract significantly influence antioxidant activity, but do not significantly affect organoleptic test results, couverture chocolate products with the addition of 0.3% spice extract are declared as selected products with antioxidant activity of 83.594%, 1.41% moisture, 1.04% ash, 20.96% fat, 3.40% protein content, 73.19% carbohydrates and total calories 495 kcal/100 grams.

Digital Human Modelling Systems: A Procedure for Verification and Validation Using the F-16 Crew Station

2000 ◽  
Vol 44 (38) ◽  
pp. 723-726 ◽  
Author(s):  
Jeffrey A. Hudson ◽  
Aernout Oudenhuijzen ◽  
Gregory F. Zehner
Keyword(s):  
Basic Element ◽  
Verification And Validation ◽  
Test Results ◽  
Joint Project ◽  
Human Modelling ◽  
Complete Discussion ◽  
Validation Procedure ◽  
Two Phases ◽  
Digital Human ◽  
Cockpit Design

Digital Human Modelling Systems (HMS's) are considered a basic element in the cockpit design process. Their bio-fidelity has yet to be fully demonstrated, however. Currently, a joint project, undertaken by the Air Force Research Lab (AFRL/HECP) and the Netherlands (TNO HFRI), is addressing this issue. This effort will help improve methods for controlling and assuring anthropometric accommodation of crew systems in military aircraft. A verification and validation procedure is being developed as a part of this project and has been implemented for several commercially available HMS's. The two phases of the procedure are: 1. Anthropometric Verification: Quantify and compare a set of anthropometric values measured on 8 test subjects with the same set measured on their corresponding digital manikins (their human models), and 2. F-16 Cockpit Validation: Quantify and compare field test results (involving reaches, clearance, vision) of the same 8 test subjects in an F-16 cockpit, to the digital test results obtained with the HMS's using digital models of the subjects placed in an F-16 CAD drawing. The digital tests are conducted without knowledge of the field data results. The ultimate goal of this project is to set the standard for verification and validation of Human Modelling Systems to ensure their bio-fidelity. A complete discussion of the methods is provided below. The results, however, were not available at the time this manuscript was submitted, but will be covered in the oral presentation.

Sign in / Sign up

Export Citation Format

Share Document