scholarly journals Anthropogenic CO<sub>2</sub> monitoring satellite mission: the need for multi-angle polarimetric observations

2020 ◽  
Author(s):  
Stephanie P. Rusli ◽  
Otto Hasekamp ◽  
Joost aan de Brugh ◽  
Guangliang Fu ◽  
Yasjka Meijer ◽  
...  
Keyword(s):  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Zenith Angle ◽  
Atmospheric Aerosols ◽  
Solar Zenith Angle ◽  
Added Value ◽  
Aerosol Layer ◽  
Satellite Mission ◽  
Measurement Uncertainties ◽  
Data Yield

Abstract. Atmospheric aerosols have been known to be a major source of uncertainties in CO2 concentrations retrieved from space. In this study, we investigate the added value of multi-angle polarimeter (MAP) measurements in the context of the Copernicus candidate mission for anthropogenic CO2 monitoring (CO2M). To this end, we compare aerosol-induced XCO2 errors from standard retrievals using spectrometer only (without MAP) with those from retrievals using both MAP and spectrometer. MAP observations are expected to provide information about aerosols that is useful for improving XCO2 accuracy. For the purpose of this work, we generate synthetic measurements for different atmospheric and geophysical scenes over land, based on which XCO2 retrieval errors are assessed. We show that the standard XCO2 retrieval approach that makes no use of auxiliary aerosol observations returns XCO2 errors with an overall bias of 1.12 ppm, and a spread (defined as half of the 15.9th to the 84.1th percentile range) of 2.07 ppm. The latter is far higher than the required XCO2 accuracy (0.5 ppm) and precision (0.7 ppm) of the CO2M mission. Moreover, these XCO2 errors exhibit a significantly larger bias and scatter at high aerosol optical depth, high aerosol altitude, and low solar zenith angle, which could lead to a worse performance in retrieving XCO2 from polluted areas where CO2 and aerosols are co-emitted. We proceed to determine MAP instrument specifications in terms of wavelength range, number of viewing angles, and measurement uncertainties that are required to achieve XCO2 accuracy and precision targets of the mission. Two different MAP instrument concepts are considered in this analysis. We find that for either concept, MAP measurement uncertainties on radiance and degree of linear polarization should be no more than 3 % and 0.003, respectively. Adopting the derived MAP requirements, a retrieval exercise using both MAP and spectrometer measurements of the synthetic scenes delivers XCO2 errors with an overall bias of −0.004 ppm and a spread of 0.54 ppm, implying compliance with the CO2M mission requirements; the very low bias is especially important for proper emission estimates. For the test ensemble, we find effectively no dependence of the XCO2 errors on aerosol optical depth, altitude of the aerosol layer, and solar zenith angle. These results indicate a major improvement in the retrieved XCO2 accuracy with respect to the standard retrieval approach, which could lead to a higher data yield, better global coverage, and a more comprehensive determination of CO2 sinks and sources. As such, this outcome underlines the contribution of, and therefore the need for, a MAP instrument onboard the CO2M mission.

scholarly journals Anthropogenic CO<sub>2</sub> monitoring satellite mission: the need for multi-angle polarimetric observations

2021 ◽  
Vol 14 (2) ◽  
pp. 1167-1190
Author(s):  
Stephanie P. Rusli ◽  
Otto Hasekamp ◽  
Joost aan de Brugh ◽  
Guangliang Fu ◽  
Yasjka Meijer ◽  
...  
Keyword(s):  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Zenith Angle ◽  
Atmospheric Aerosols ◽  
Solar Zenith Angle ◽  
Added Value ◽  
Aerosol Layer ◽  
Satellite Mission ◽  
Measurement Uncertainties ◽  
Data Yield

Abstract. Atmospheric aerosols have been known to be a major source of uncertainties in CO2 concentrations retrieved from space. In this study, we investigate the added value of multi-angle polarimeter (MAP) measurements in the context of the Copernicus Anthropogenic Carbon Dioxide Monitoring (CO2M) mission. To this end, we compare aerosol-induced XCO2 errors from standard retrievals using a spectrometer only (without MAP) with those from retrievals using both MAP and a spectrometer. MAP observations are expected to provide information about aerosols that is useful for improving XCO2 accuracy. For the purpose of this work, we generate synthetic measurements for different atmospheric and geophysical scenes over land, based on which XCO2 retrieval errors are assessed. We show that the standard XCO2 retrieval approach that makes no use of auxiliary aerosol observations returns XCO2 errors with an overall bias of 1.12 ppm and a spread (defined as half of the 15.9–84.1 percentile range) of 2.07 ppm. The latter is far higher than the required XCO2 accuracy (0.5 ppm) and precision (0.7 ppm) of the CO2M mission. Moreover, these XCO2 errors exhibit a significantly larger bias and scatter at high aerosol optical depth, high aerosol altitude, and low solar zenith angle, which could lead to worse performance in retrieving XCO2 from polluted areas where CO2 and aerosols are co-emitted. We proceed to determine MAP instrument specifications in terms of wavelength range, number of viewing angles, and measurement uncertainties that are required to achieve XCO2 accuracy and precision targets of the mission. Two different MAP instrument concepts are considered in this analysis. We find that for either concept, MAP measurement uncertainties on radiance and degree of linear polarization should be no more than 3 % and 0.003, respectively. A retrieval exercise using MAP and spectrometer measurements of the synthetic scenes is carried out for each of the two MAP concepts. The resulting XCO2 errors have an overall bias of −0.004 ppm and a spread of 0.54 ppm for one concept, and a bias of 0.02 ppm and a spread of 0.52 ppm for the other concept. Both are compliant with the CO2M mission requirements; the very low bias is especially important for proper emission estimates. For the test ensemble, we find effectively no dependence of the XCO2 errors on aerosol optical depth, altitude of the aerosol layer, and solar zenith angle. These results indicate a major improvement in the retrieved XCO2 accuracy with respect to the standard retrieval approach, which could lead to a higher data yield, better global coverage, and a more comprehensive determination of CO2 sinks and sources. As such, this outcome underlines the contribution of, and therefore the need for, a MAP instrument aboard the CO2M mission.

Anthropogenic CO2 monitoring satellite mission: the need for multi-angle polarimetric observations

2020 ◽  
Author(s):  
Stephanie P. Rusli ◽  
Otto Hasekamp ◽  
Joost aan de Brugh ◽  
Guangliang Fu ◽  
Yasjka Meijer ◽  
...  
Keyword(s):  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Zenith Angle ◽  
Linear Polarization ◽  
Solar Zenith Angle ◽  
Added Value ◽  
Aerosol Layer ◽  
Satellite Mission ◽  
Measurement Uncertainties ◽  
Data Yield

&lt;p&gt;Scattering due to aerosols and cirrus has long been identified as one of main sources of uncertainties in retrieving XCO&lt;sub&gt;2&lt;/sub&gt; from solar backscattered radiation. In this work, we investigate the added value of multi-angle polarimeter (MAP) measurements in the context of Copernicus candidate mission for anthropogenic CO&lt;sub&gt;2&lt;/sub&gt; monitoring (CO2M). To this end, we compare aerosol-induced XCO&lt;sub&gt;2&lt;/sub&gt; errors from standard retrievals using spectrometer only (without MAP) with those from retrievals using both MAP and spectrometer. MAP measures radiance and degree of linear polarization (DLP) simultaneously at multiple wavelengths and at multiple viewing angles; these observations are expected to provide information about aerosols that is useful for improving XCO&lt;sub&gt;2&lt;/sub&gt; accuracy. Using an ensemble of 500 synthetic scenes over land, we show that the standard XCO&lt;sub&gt;2&lt;/sub&gt; retrieval approach that makes no use of MAP observations returns XCO&lt;sub&gt;2&lt;/sub&gt; errors with an overall bias of 1.04 ppm, and a spread (equivalent to standard deviation for a normal distribution) of 2.07 ppm. The latter is far higher than the required XCO&lt;sub&gt;2&lt;/sub&gt; accuracy (0.5 ppm) and precision (0.7 ppm) of the CO2M mission. Moreover, these XCO&lt;sub&gt;2&lt;/sub&gt; errors exhibit a significantly larger bias and scatter at high aerosol optical depth, high aerosol altitude, and low solar zenith angle, which suggest a worse performance in retrieving XCO&lt;sub&gt;2&lt;/sub&gt; from polluted areas where CO&lt;sub&gt;2&lt;/sub&gt; and aerosols are co-emitted. Given the CO2M mission requirements, we proceed to derive MAP instrument specifications in terms of measurement uncertainties, number of viewing angles, and the wavelength range. Two different MAP instrument concepts are considered in this requirement analysis. We find that for either concept, MAP measurement uncertainties on radiance and degree of linear polarization should be no more than 3% and 0.003, respectively. Adopting the derived MAP requirements, a retrieval exercise on the 500 synthetic scenes using both MAP and spectrometer measurements delivers XCO&lt;sub&gt;2&lt;/sub&gt; errors with an overall bias of -0.09 ppm and a spread of 0.57 ppm, indicating compliance with the CO2M mission requirements. For the test ensemble, we find effectively no dependence of the XCO&lt;sub&gt;2&lt;/sub&gt; errors on aerosol optical depth, altitude of the aerosol layer, and solar zenith angle. These results represent a significant improvement in the retrieved XCO&lt;sub&gt;2&lt;/sub&gt; accuracy compared to the standard retrieval approach, which may lead to a higher data yield, better global coverage, and a more comprehensive determination of CO&lt;sub&gt;2&lt;/sub&gt; sinks and sources. As such, this outcome underscores the contribution of, and therefore the need for, a MAP instrument onboard the CO2M mission.&lt;/p&gt;

scholarly journals Retrieval of aerosol single-scattering albedo and polarized phase function from polarized sun-photometer measurements for Zanjan's atmosphere

2013 ◽  
Vol 6 (10) ◽  
pp. 2659-2669 ◽  
Author(s):  
A. Bayat ◽  
H. R. Khalesifard ◽  
A. Masoumi
Keyword(s):  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Atmospheric Aerosols ◽  
Phase Function ◽  
Single Scattering ◽  
Single Scattering Albedo ◽  
Angstrom Exponent ◽  
Ångström Exponent ◽  
Sun Photometer ◽  
Ångstrom Exponent

Abstract. The polarized phase function of atmospheric aerosols has been investigated for the atmosphere of Zanjan, a city in northwest Iran. To do this, aerosol optical depth, Ångström exponent, single-scattering albedo, and polarized phase function have been retrieved from the measurements of a Cimel CE 318-2 polarized sun-photometer from February 2010 to December 2012. The results show that the maximum value of aerosol polarized phase function as well as the polarized phase function retrieved for a specific scattering angle (i.e., 60°) are strongly correlated (R = 0.95 and 0.95, respectively) with the Ångström exponent. The latter has a meaningful variation with respect to the changes in the complex refractive index of the atmospheric aerosols. Furthermore the polarized phase function shows a moderate negative correlation with respect to the atmospheric aerosol optical depth and single-scattering albedo (R = −0.76 and −0.33, respectively). Therefore the polarized phase function can be regarded as a key parameter to characterize the atmospheric particles of the region – a populated city in the semi-arid area and surrounded by some dust sources of the Earth's dust belt.

scholarly journals Using the OMI Aerosol Index and Absorption Aerosol Optical Depth to evaluate the NASA MERRA Aerosol Reanalysis

2014 ◽  
Vol 14 (23) ◽  
pp. 32177-32231 ◽  
Author(s):  
V. Buchard ◽  
A. M. da Silva ◽  
P. R. Colarco ◽  
A. Darmenov ◽  
C. A. Randles ◽  
...  
Keyword(s):  
Optical Properties ◽  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Biomass Burning ◽  
Saharan Dust ◽  
Aerosol Layer ◽  
Anthropogenic Aerosols ◽  
Aerosol Absorption ◽  
Modis Aod ◽  
Aerosol Index

Abstract. A radiative transfer interface has been developed to simulate the UV Aerosol Index (AI) from the NASA Goddard Earth Observing System version 5 (GEOS-5) aerosol assimilated fields. The purpose of this work is to use the AI and Aerosol Absorption Optical Depth (AAOD) derived from the Ozone Monitoring Instrument (OMI) measurements as independent validation for the Modern Era Retrospective analysis for Research and Applications Aerosol Reanalysis (MERRAero). MERRAero is based on a version of the GEOS-5 model that is radiatively coupled to the Goddard Chemistry, Aerosol, Radiation, and Transport (GOCART) aerosol module and includes assimilation of Aerosol Optical Depth (AOD) from the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor. Since AI is dependent on aerosol concentration, optical properties and altitude of the aerosol layer, we make use of complementary observations to fully diagnose the model, including AOD from the Multi-angle Imaging SpectroRadiometer (MISR), aerosol retrievals from the Aerosol Robotic Network (AERONET) and attenuated backscatter coefficients from the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) mission to ascertain potential misplacement of plume height by the model. By sampling dust, biomass burning and pollution events in 2007 we have compared model produced AI and AAOD with the corresponding OMI products, identifying regions where the model representation of absorbing aerosols was deficient. As a result of this study over the Saharan dust region, we have obtained a new set of dust aerosol optical properties that retains consistency with the MODIS AOD data that were assimilated, while resulting in better agreement with aerosol absorption measurements from OMI. The analysis conducted over the South African and South American biomass burning regions indicates that revising the spectrally-dependent aerosol absorption properties in the near-UV region improves the modeled-observed AI comparisons. Finally, during a period where the Asian region was mainly dominated by anthropogenic aerosols, we have performed a qualitative analysis in which the specification of anthropogenic emissions in GEOS-5 is adjusted to provide insight into discrepancies observed in AI comparisons.

scholarly journals The regime of Aerosol Optical Depth and Ångström exponent over Central and South Asia

2019 ◽  
Vol 99 ◽  
pp. 01003
Author(s):  
Athina Avgousta Floutsi ◽  
Marios Bruno Korras Carraca ◽  
Christos Matsoukas ◽  
Nikos Hatzianastassiou ◽  
George Biskos
Keyword(s):  
South Asia ◽  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Atmospheric Aerosols ◽  
Dust Particles ◽  
Desert Dust ◽  
Angstrom Exponent ◽  
Ångström Exponent ◽  
Dust Load ◽  
Ångstrom Exponent

Central and South Asia are regions of particular interest for studying atmospheric aerosols, being among the largest sources of desert dust aerosols globally. In this study we use the newest collection (C061) of MODIS - Aqua aerosol optical depth (AOD) at 550 nm and Ångström exponent (a) at 412/470 nm over the 15-year period between 2002 and 2017, providing the longest analyzed dataset for this region. According to our results, during spring and summer, high aerosol load (AOD up to 1.2) consisting of coarse desert dust particles, as indicated by a values as low as 0.15, is observed over the Taklamakan, Thar and Registan deserts and the region between the Aral and Caspian seas. The dust load is much lower during winter and autumn (lower AOD and higher a values compared to the other seasons). The interannual variation of AOD and a suggests that the dust load exhibits large decreasing trends (AOD slopes down to -0.22, a slopes up to 0.47 decade-1) over the Thar desert and large increasing trends between the Aral and Caspian seas (AOD and a slopes up to 0.23 decade-1 and down to -0.61 decade-1, respectively.) The AOD data are evaluated against AERONET surface-based measurements. Generally, MODIS and AERONET data are in good agreement with a correlation coefficient (R) equal to 0.835.

Dust Aerosol Optical Depth Retrieval over a Desert Surface Using the SEVIRI Window Channels

2009 ◽  
Vol 26 (4) ◽  
pp. 704-718 ◽  
Author(s):  
Bart De Paepe ◽  
Steven Dewitte
Keyword(s):  
Surface Temperature ◽  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Surface Radiation ◽  
Retrieval Algorithm ◽  
Aerosol Layer ◽  
Surface Emissivity ◽  
Ir Radiation ◽  
Clear Sky ◽  
A Minor

Abstract The authors present a new algorithm to retrieve aerosol optical depth (AOD) over a desert using the window channels centered at 8.7, 10.8, and 12.0 μm of the Spinning Enhanced Visible and Infrared Imager (SEVIRI) instrument on board the Meteosat Second Generation satellite. The presence of dust aerosols impacts the longwave outgoing radiation, allowing the aerosols over the desert surfaces to be detected in the thermal infrared (IR) wavelengths. To retrieve the aerosol properties over land, the surface contribution to the satellite radiance measured at the top of the atmosphere has to be taken into account. The surface radiation depends on the surface temperature, which is characterized by a strong diurnal variation over the desert, and the surface emissivity, which is assumed to be constant over a time span of 24 h. The surface emissivity is based on clear-sky observations that are corrected for atmospheric absorption and emission. The clear-sky image is a composite of pixels that is characterized by the highest brightness temperature (BT) of the SEVIRI channel at 10.8 μm, and by a negative BT difference between the channels at 8.7 and 10.8 μm. Because of the lower temperatures of clouds and aerosols compared to clear-sky conditions, the authors assume that the selected pixel values are obtained for a clear-sky day. A forward model is used to simulate the thermal IR radiation transfer in the dust layer. The apparent surface radiation for the three window channels in the presence of aerosols is calculated as a function of the surface emissivity and the surface temperature, the aerosol layer temperature, and the AOD for different aerosol loadings. From these simulations two emissivity ratios, which are stored in lookup tables (LUT), are calculated. The retrieval algorithm consists of processing the clear-sky image and computing the surface emissivity, processing the instantaneous image, and computing the apparent surface radiation for the three window channels. The two emissivity ratios are computed using the radiances at 8.7 and 10.8 μm and at 8.7 and 12.0 μm, respectively. The SEVIRI AOD is obtained by the inversion of these emissivity ratios using the corresponding LUT. The algorithm is applied to a minor dust event over the Sahara between 19 and 22 June 2007. For the validation the SEVIRI AOD is compared with the AOD from the Cloud Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) along the satellite track.

scholarly journals A Multi Linear Regression Model to Derive Dust PM10 in the Sahel Using AERONET Aerosol Optical Depth and CALIOP Aerosol Layer Products

2020 ◽  
Vol 12 (18) ◽  
pp. 3099
Author(s):  
Jean-François Léon ◽  
Nadège Martiny ◽  
Sébastien Merlet
Keyword(s):  
Linear Regression ◽  
Regression Model ◽  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Linear Regression Model ◽  
Population Exposure ◽  
Aerosol Layer ◽  
Multi Linear Regression ◽  
Sun Photometer ◽  
The Impact

Due to a limited number of monitoring stations in Western Africa, the impact of mineral dust on PM10 surface concentrations is still poorly known. We propose a new method to retrieve PM10 dust surface concentrations from sun photometer aerosol optical depth (AOD) and CALIPSO/CALIOP Level 2 aerosol layer products. The method is based on a multi linear regression model that is trained using co-located PM10, AERONET and CALIOP observations at 3 different locations in the Sahel. In addition to the sun photometer AOD, the regression model uses the CALIOP-derived base and top altitude of the lowermost dust layer, its AOD, the columnar total and columnar dust AOD. Due to the low revisit period of the CALIPSO satellite, the monthly mean annual cycles of the parameters are used as predictor variables rather than instantaneous observations. The regression model improves the correlation coefficient between monthly mean PM10 and AOD from 0.15 (AERONET AOD only) to 0.75 (AERONET AOD and CALIOP parameters). The respective high and low PM10 concentration during the winter dry season and summer season are well produced. Days with surface PM10 above 100 μg/m3 are better identified when using the CALIOP parameters in the multi linear regression model. The number of true positives (actual and predicted concentrations above the threshold) is increased and leads to an improvement in the classification sensitivity (recall) by a factor 1.8. Our methodology can be extrapolated to the whole Sahel area provided that satellite derived AOD maps are used in order to create a new dataset on population exposure to dust events in this area.

scholarly journals A Parametric Radiative Forcing Model for Contrail Cirrus

2012 ◽  
Vol 51 (7) ◽  
pp. 1391-1406 ◽  
Author(s):  
U. Schumann ◽  
B. Mayer ◽  
K. Graf ◽  
H. Mannstein
Keyword(s):  
Analytical Model ◽  
Optical Depth ◽  
Zenith Angle ◽  
Radiative Forcing ◽  
Solar Zenith Angle ◽  
Life Cycles ◽  
Radiative Transfer Model ◽  
Model Parameters ◽  
Transfer Model ◽  
Wide Range

AbstractA new parameterized analytical model is presented to compute the instantaneous radiative forcing (RF) at the top of the atmosphere (TOA) produced by an additional thin contrail cirrus layer (called “contrail” below). The model calculates the RF using as input the outgoing longwave radiation and reflected solar radiation values at TOA for a contrail-free atmosphere, so that the model is applicable for both cloud-free and cloudy ambient atmospheres. Additional input includes the contrail temperature, contrail optical depth (at 550 nm), effective particle radius, particle habit, solar zenith angle, and the optical depth of cirrus above the contrail layer. The model parameters (5 for longwave and 10 for shortwave) are determined from least squares fits to calculations from the “libRadtran” radiative transfer model over a wide range of atmospheric and surface conditions. The correlation coefficient between model and calculations is larger than 98%. The analytical model is compared with published results, including a 1-yr simulation of global RF, and is found to agree well with previous studies. The fast analytical model is part of a larger modeling system to simulate contrail life cycles (“CoCiP”) and can allow for the rapid simulation of contrail cirrus RF over a wide range of meteorological conditions and for a given size-dependent habit mixture. Ambient clouds are shown to have large local impact on the net RF of contrails. Net RF of contrails may both increase and decrease and even change sign in the presence of higher-level cirrus, depending on solar zenith angle.

Sign in / Sign up

Export Citation Format

Share Document