scholarly journals High-resolution simulations with COSMO model including TERRA_URB TERRA_URB parameterization for the representation of Urban Heat Islands over South Italy

2020 ◽  
Vol 17 ◽  
pp. 19-22 ◽  
Author(s):  
Edoardo Bucchignani ◽  
Paola Mercogliano
Keyword(s):  
High Resolution ◽  
Rural Areas ◽  
Parameter Tuning ◽  
Urban Heat Islands ◽  
Limited Area ◽  
Test Case ◽  
Specific Test ◽  
Heat Islands ◽  
Cosmo Model ◽  
Urban Heat

Abstract. In this work, some preliminary numerical simulations with the COSMO model including TERRA_URB parameterization have been performed. In particular, this work concerns simulations over a small domain located in southern Italy, in order to test the capabilities of the model in reproducing the main climate features of Urban Heat Islands over this area. Model evaluation has been performed in terms of 2 m temperature in an urban area and in a rural one, in order to highlight the behaviour of the parameterization in different contexts. Numerical results encourage further investigation and development of urban parameterization in very high-resolution configuration of limited area models and specifically of COSMO, to improve the representation of the maximum daily values of temperature and diurnal cycle especially in urban, but also in rural areas. Furthermore a better parameter tuning is still required for this specific test case.

scholarly journals Urban heat island: Aerodynamics or imperviousness?

2019 ◽  
Vol 5 (4) ◽  
pp. eaau4299 ◽  
Author(s):  
Dan Li ◽  
Weilin Liao ◽  
Angela J. Rigden ◽  
Xiaoping Liu ◽  
Dagang Wang ◽  
...  
Keyword(s):  
Green Infrastructure ◽  
Rural Areas ◽  
Land Surface ◽  
Urban Heat Islands ◽  
Lower Atmosphere ◽  
Geographic Variations ◽  
Heat Islands ◽  
Urban Heat ◽  
The Difference ◽  
Urban And Rural Areas

More than half of the world’s population now live in cities, which are known to be heat islands. While daytime urban heat islands (UHIs) are traditionally thought to be the consequence of less evaporative cooling in cities, recent work sparks new debate, showing that geographic variations of daytime UHI intensity were largely explained by variations in the efficiency with which urban and rural areas convect heat from the land surface to the lower atmosphere. Here, we reconcile this debate by demonstrating that the difference between the recent finding and the traditional paradigm can be explained by the difference in the attribution methods. Using a new attribution method, we find that spatial variations of daytime UHI intensity are more controlled by variations in the capacity of urban and rural areas to evaporate water, suggesting that strategies enhancing the evaporation capability such as green infrastructure are effective ways to mitigate urban heat.

scholarly journals The Influence of Vegetation on UHIs, MUHIs, and Microclimate of Selected Southern Cities

HortScience ◽  
1997 ◽  
Vol 32 (3) ◽  
pp. 509A-509
Author(s):  
Derald A. Harp ◽  
Edward L. McWilliams
Keyword(s):  
Rural Areas ◽  
Urban Areas ◽  
Building Materials ◽  
Urban Heat Islands ◽  
Shopping Malls ◽  
Heat Islands ◽  
Suburban Areas ◽  
Winter Temperatures ◽  
Urban Heat ◽  
The City

Urban areas have average annual temperatures 2–3°C warmer than surrounding rural areas, with daily differences of 5–6°C common. A suggested reason for this temperature difference is the extensive use of concrete, asphalt, and other building materials in the urban environment. Vegetation can moderate these temperatures by intercepting incoming radiation. The influence of vegetation patterns on the magnitude of urban and micro-urban “heat islands” (UHI and MUHI, respectively) is compared for several cities including Houston, Austin, College Station, and Ft. Worth, Texas; Huntsville, Ala.; and Gainesville, Fla. Temperatures for all cities studied were greatest in the built-up areas and dropped off in suburban areas and adjacent rural areas. In Houston, surrounding rice fields were 3–5°C cooler than urban areas. Heavily built-up areas of Austin were 2–4°C warmer than parks and fields outside of the city. In all of the cities, large parks were typically 2–3°C cooler than adjacent built-up areas. Large shopping malls varied in nocturnal winter and summer temperature, with winter temperatures near door openings 2–3°C warmer, and summer daytime temperatures as much as 17°C cooler beneath trees. This effect seemed to persist at the microclimatic scale. Areas beneath evergreen trees and shrubs were warmer in the winter than surrounding grass covered areas. Video thermography indicated that the lower surfaces of limbs in deciduous trees were warmer than the upper surfaces. Overall, vegetation played a significant role, both at the local and microscale, in temperature moderation.

Automated detection of urban heat islands based on satellite imagery, digital surface models, and a low-cost sensor network                                     

2021 ◽  
Author(s):  
Sebastian Schlögl ◽  
Nico Bader ◽  
Julien Gérard Anet ◽  
Martin Frey ◽  
Curdin Spirig ◽  
...  
Keyword(s):  
Climate Change ◽  
Air Temperature ◽  
Rural Areas ◽  
Urban Areas ◽  
Low Cost ◽  
Urban Heat Islands ◽  
Heat Islands ◽  
Micro Scale ◽  
Air Temperatures ◽  
Urban Heat

<p>Today, more than half of the world’s population lives in urban areas and the proportion is projected to increase further in the near future. The increased number of heatwaves worldwide caused by the anthropogenic climate change may lead to heat stress and significant economic and ecological damages. Therefore, the growth of urban areas in combination with climate change can increase future mortality rates in cities, given that cities are more vulnerable to heatwaves due to the greater heat storage capacity of artificial surfaces towards higher longwave radiation fluxes.</p><p>To detect urban heat islands and resolve the micro-scale air temperature field in an urban environment, a low-cost air temperature network, including 450 sensors, was installed in the Swiss cities of Zurich and Basel in 2019 and 2020. These air temperature data, complemented with further official measurement stations, force a statistical air temperature downscaling model for urban environments, which is used operationally to calculate hourly micro-scale air temperatures in 10 m horizontal resolution. In addition to air temperature measurements from the low-cost sensor network, the model is further forced by albedo, NDVI, and NDBI values generated from the polar-orbiting satellite Sentinel-2, land surface temperatures estimated from Landsat-8, and high-resolution digital surface and elevation models.</p><p>Urban heat islands (UHI) are processed averaging hourly air temperatures over an entire year for each grid point, and comparing this average to the overall average in rural areas. UHI effects can then be correlated to high-resolution local climate zone maps and other local factors.</p><p>Between 60-80 % of the urban area is modeled with an accuracy below 1 K for an hourly time step indicating that the approach may work well in different cities. However, the outcome may depend on the complexity of the cities. The model error decreases rapidly by increasing the number of spatially distributed sensor data used to train the model, from 0 to 70 sensors, and then plateaus with further increases. An accuracy below 1 K can be expected for more than 50 air temperature measurements within the investigated cities and the surrounding rural areas. </p><p>A strong statistical air temperature model coupled with atmospheric boundary layer models (e.g. PALM-4U, MUKLIMO, FITNAH) will aid to generate highly resolved urban heat island prediction maps that help decision-makers to identify local heat islands easier. This will ensure that financial resources will be invested as efficiently as possible in mitigation actions.</p>

Synergistic Interactions between Urban Heat Islands and Heat Waves: The Impact in Cities Is Larger than the Sum of Its Parts

2013 ◽  
Vol 52 (9) ◽  
pp. 2051-2064 ◽  
Author(s):  
Dan Li ◽  
Elie Bou-Zeid
Keyword(s):  
Urban Heat Island ◽  
Rural Areas ◽  
Urban Areas ◽  
Heat Waves ◽  
Mitigation Strategies ◽  
Urban Heat Islands ◽  
Heat Island ◽  
Heat Islands ◽  
Urban Heat ◽  
The Impact

AbstractCities are well known to be hotter than the rural areas that surround them; this phenomenon is called the urban heat island. Heat waves are excessively hot periods during which the air temperatures of both urban and rural areas increase significantly. However, whether urban and rural temperatures respond in the same way to heat waves remains a critical unanswered question. In this study, a combination of observational and modeling analyses indicates synergies between urban heat islands and heat waves. That is, not only do heat waves increase the ambient temperatures, but they also intensify the difference between urban and rural temperatures. As a result, the added heat stress in cities will be even higher than the sum of the background urban heat island effect and the heat wave effect. Results presented here also attribute this added impact of heat waves on urban areas to the lack of surface moisture in urban areas and the low wind speed associated with heat waves. Given that heat waves are projected to become more frequent and that urban populations are substantially increasing, these findings underline the serious heat-related health risks facing urban residents in the twenty-first century. Adaptation and mitigation strategies will require joint efforts to reinvent the city, allowing for more green spaces and lesser disruption of the natural water cycle.

scholarly journals IASI observations at the city scale

2020 ◽  
Author(s):  
Sarah Safieddine ◽  
Maya George ◽  
Cathy Clerbaux ◽  
Ana Paracho ◽  
Anne Boynard ◽  
...  
Keyword(s):  
Rural Areas ◽  
Urban Areas ◽  
Spatial Scales ◽  
Urban Heat Islands ◽  
Atmospheric Composition ◽  
Heat Islands ◽  
Large Cities ◽  
Urban Heat ◽  
Good Tracer ◽  
The City

<p>IASI is a versatile mission, allowing the measurement of both meteorological parameters such as temperature and atmospheric composition for infrared absorbing species. With its long observation record and frequent overpasses, IASI is able to follow changes at different spatial scales. We studied IASI’s capability to track the anthropogenic signature associated with large cities, both in terms of temperature fingerprint (urban heat islands) and carbon monoxide (CO) content, a good tracer of human activity (transport, heating, and industrial activities). For this study we averaged the IASI data available since the launch of the first IASI, in order to increase the signal to noise, and allow discriminating the city from its surroundings. For skin temperatures we show that some cities experience much warmer temperatures than nearby rural areas, with day and night differences, whereas other urban areas appear as cold urban islands when surrounded by deserts Examples will be shown and compare with MODIS observations. For CO emitted by human activities, we identified some cities that stand out from their background, and were able to compare their CO associated signatures with measurements provided by other available spaceborne instruments such as Mopitt and TROPOMI.</p>

scholarly journals High-Resolution Simulations of the Urban Thermal Climate in Suzhou City, China

Atmosphere ◽  
2019 ◽  
Vol 10 (3) ◽  
pp. 118
Author(s):  
Yan Chen ◽  
Ning Zhang ◽  
Yan Zhu
Keyword(s):  
High Resolution ◽  
Urban Areas ◽  
Urban Climate ◽  
Urban Canopy ◽  
High Density ◽  
Urban Heat Islands ◽  
Medium Density ◽  
Heat Islands ◽  
Thermal Climate ◽  
Urban Heat

City thermal discomfort conditions have been exacerbated by the rapid urbanization processes in China. High-resolution urban thermal climate simulations can help us to understand urban climate features and produce better urban designs. In this paper, a single-layer urban canopy model (UCM) combined with Landsat satellite data and high-resolution meteorological forcing data was used to simulate very-high-resolution characteristics of temperature and humidity at the urban canopy level, and the heat index at the pedestrian level was also estimated. The research shows that the National center of environmental forecasting, Oregon state university, Air force and Hydrological research lab (NOAH)-UCM model can simulate the distribution of meteorological elements for different land uses in a fine and effective manner, making it an effective approach to obtaining the fundamental data for urban climate analysis. The spatial distribution pattern of urban heat islands in Suzhou is highly consistent with urban land cover fraction. High-density and medium-density urban areas are centers of urban heat islands, and the annual number of high-temperature days and heat indices over the high-density and medium-density urban areas are markedly higher than those in low-density cities and suburbs, indicating that urban development has a significant impact on the urban thermal environment.

scholarly journals Study of the Urban Heat Island (UHI) Using Remote Sensing Data/Techniques: A Systematic Review

Environments ◽  
2021 ◽  
Vol 8 (10) ◽  
pp. 105
Author(s):  
Cátia Rodrigues de Almeida ◽  
Ana Cláudia Teodoro ◽  
Artur Gonçalves
Keyword(s):  
Remote Sensing ◽  
Systematic Review ◽  
Rural Areas ◽  
Land Surface ◽  
Remote Sensing Data ◽  
Urban Heat Islands ◽  
Pollution Effects ◽  
Heat Islands ◽  
Urban Heat ◽  
Number Of Publications

Urban Heat Islands (UHI) consist of the occurrence of higher temperatures in urbanized areas when compared to rural areas. During the warmer seasons, this effect can lead to thermal discomfort, higher energy consumption, and aggravated pollution effects. The application of Remote Sensing (RS) data/techniques using thermal sensors onboard satellites, drones, or aircraft, allow for the estimation of Land Surface Temperature (LST). This article presents a systematic review of publications in Scopus and Web of Science (WOS) on UHI analysis using RS data/techniques and LST, from 2000 to 2020. The selection of articles considered keywords, title, abstract, and when deemed necessary, the full text. The process was conducted by two independent researchers and 579 articles, published in English, were selected. Qualitative and quantitative analyses were performed. Cfa climate areas are the most represented, as the Northern Hemisphere concentrates the most studied areas, especially in Asia (69.94%); Landsat products were the most applied to estimates LST (68.39%) and LULC (55.96%); ArcGIS (30.74%) was most used software for data treatment, and correlation (38.69%) was the most applied statistic technique. There is an increasing number of publications, especially from 2016, and the transversality of UHI studies corroborates the relevance of this topic.

scholarly journals Enhanced surface urban heat islands due to divergent urban-rural greening trends

2021 ◽  
Author(s):  
Chi Chen ◽  
Dan Li ◽  
Trevor F. Keenan
Keyword(s):  
Rural Areas ◽  
Urban Heat Islands ◽  
Anthropogenic Heat ◽  
Rapid Urbanization ◽  
Area Index ◽  
Heat Islands ◽  
Urban Rural ◽  
Urban Heat ◽  
Urban And Rural Areas ◽  
The Impact

Abstract Satellite observations show that the surface urban heat island intensity (SUHII) has been increasing over the last two decades. This is often accompanied by an increased urban-rural contrast of vegetation greenness. However, the contribution of uneven vegetation trends in urban and rural areas to the trend of SUHII is unclear, due to the confounding effects of climate change and changes in man-made amenities and anthropogenic heat sources. Here we use a data-model fusion approach to quantify such contributions during the peak growing season. We show that the LAIdif (the urban-rural difference of leaf area index) is increasing (P<0.05) in 189 of the selected 228 global megacities. The increasing trend of LAIdif from 2000 to 2019 accounts for about one quarter of the trend in satellite-derived SUHII, and the impact is particularly evident in places with rapid urbanization and rural cropland intensification. The marginal sensitivity of SUHII to LAIdif is the strongest in hot-humid megacities surrounded by croplands and in hot-dry megacities surrounded by mixed woody and herbaceous vegetation. Our study highlights the role of long-term vegetation trends in modulating the trends of urban-rural temperature differences.

scholarly journals ACQUISITION AND PROCESSING OF HIGH RESOLUTION HYPERSPECTRAL IMAGERIES FOR THE 3D MAPPING OF URBAN HEAT ISLANDS AND MICROPARTICLES OF MONTREAL

2017 ◽  
Vol XLII-4/W7 ◽  
pp. 27-30
Author(s):  
R. Mongeau ◽  
Y. Baudouin ◽  
F. Cavayas
Keyword(s):  
High Resolution ◽  
Urban Heat Islands ◽  
Tree Planting ◽  
3D Mapping ◽  
Atmospheric Parameters ◽  
Heat Islands ◽  
Micro Particles ◽  
Geospatial Database ◽  
Urban Heat ◽  
Problematic Situations

Ville de Montreal wanted to develop a system to identify heat islands and microparticles at the urban scale and to study their formation. UQAM and UdeM universities have joined their expertise under the framework "Observatoire Spatial Urbain" to create a representative geospatial database of thermal and atmospheric parameters collected during the summer months. They innovated in the development of a methodology for processing high resolution hyperspectral images (1&amp;ndash;2&amp;thinsp;m). In partnership with Ville de Montreal, they integrated 3D geospatial data (topography, transportation and meteorology) in the process. The 3D mapping of intraurban heat islands as well as air micro-particles makes it possible, initially, to identify the problematic situations for future civil protection interventions during extreme heat. Moreover, it will be used as a reference for the Ville de Montreal to establish a strategy for public domain tree planting and in the analysis of urban development projects.

Sign in / Sign up

Export Citation Format

Share Document