Mars surface dust activation at small meteoroid’s impacts

Author(s):  
Boris Ivanov

<p>We continue the analysis of HiRISE high resolution images of Mars to understand properties of dust covering the surface. The data on dust devils observed with Mars landers and surface traces of dust devils could be expanded with elongated albedo features imaged near “new” impact sites (“new” means that we have orbital images before and after the meteoroid impact, which give us an estimate of the impact date and the age of a feature). The age of these features is from 0.5 to 12 terrestrial years. From geometric reasons we could assume that the most possible mechanism of this elongated albedo details is the “footprint” of two or more colliding air shock waves, generated at the impact site. Of ~1200 “new” impacts known today, in 18 cases crater pairs or clusters, created with fragments of the same “parent” meteoroid, we recognize 24 thin “parabolas” with a width of 1 to 10 m (0.2 to 10 main crater diameters, <em>D</em>), extended to 100 – 400 m (3 to 100 <em>D</em>) from the impact site. In ~30 cases near a single crater we observe a curved albedo feature nick-named “scimitar”. These features have width, growing with a distance from the impact point. The length varies from 10 to 100 <em>D</em>, the width varies from 1 to 10 <em>D</em>. Our working hypothesis is that “scimitars” are footprints of ballistic and spherical air shock wave collision at the surface. Both “parabolas” and “scimitars” have an exact bilateral symmetry, which allows us to reconstruct the flight direction of projectiles.</p><p>We estimate the equivalent energy of spherical air blasts with two different assumptions for “parabolas” and “scimitars” formation. For parabolas we assume a mechanism, similar to dust devil track formation – the negative pressure excurse uplifts the upper fine dust layer. The main assumption is that the dark parabolic strip width corresponds the wave length of the negative pressure phase in the air shock wave. It gives us the minimum energy estimate as in reality the negative phase could be longer. The negative pressures here along the parabola length decay from about 10 to 5 Pa with the phase duration of a few milliseconds. Such a suction pulse is able to mobilize dust particles 50 to 100 microns in size.</p><p>For scimitars, which in contrast to “dark” parabolas are typically “brighter” than surrounding area, we have no a good mechanical explanation of origin. However, with limits of our current model, the spherical “explosion” air blast should be enough energetic, to overrun the ballistic shock wave. From non-linear motion of the shock wave front we can estimate the fraction of meteoroid’s kinetic energy, converted to the air blast energy. The model is able to reproduce approximately the scimitar’s curvature.</p>

2006 ◽  
Vol 63 (10) ◽  
pp. 2630-2641 ◽  
Author(s):  
Zhaolin Gu ◽  
Yongzhi Zhao ◽  
Yun Li ◽  
Yongzhang Yu ◽  
Xiao Feng

Abstract Based on an advanced dust devil–scale large-eddy simulation (LES) model, the atmosphere flow of a modeled dust devil in a quasi–steady state was first simulated to illustrate the characteristics of the gas phase field in the mature stage, including the prediction of the lower pressure and higher temperature in the vortex core. The dust-lifting physics is examined in two aspects. Through the experimental data analysis, it is verified again that the horizontal swirling wind can only make solid particles saltate along the ground surface. Based on a Lagrangian reference frame, the tracks of dust grains with different density (material) and diameter are calculated to show the effect of dust particles entrained by the vertical swirling wind field. The movement of solid particles depends on the interactions between the aloft dust particles and the airflow field of dust devils, in which the drag and the centrifugal force component on the horizontal plane are the key force components. There is the trend of the fine dust grains rising along the inner helical tracks while the large dust grains are lifting along the outer helical tracks and then descending beyond the corner region, resulting in the impact between different-sized dust grains in the swirling atmospheric flow. This trend will make the dust stratification, developing a top small-sized grain domain and a bottom large-sized grain domain in dust devils.


Author(s):  
И.Н. Бурдонский ◽  
А.Г. Леонов ◽  
В.Н. Юфа ◽  
А.П. Голубь ◽  
С.И. Попель ◽  
...  

The results of the first study on experimental modeling of the rise of dust particles by a shock wave above a target surface, performed on the Saturn installation, are presented. The interaction of laser radiation with a porous chondritic target, the surface of which contains fine particles of talc, is investigated. The results of experimental modeling can be used to describe the rise of dust particles from zones of nonlinear and linear elastic deformations of the regolith material, which characterize the impact of the meteoroid on the surface of the Moon.


2013 ◽  
Vol 1 (3) ◽  
pp. 9
Author(s):  
Jennifer Lee Brady ◽  
Annie Hoang ◽  
Olivia Siswanto ◽  
Jordana Riesel ◽  
Jacqui Gingras

Obtaining dietetic licensure in Ontario requires completion of a Dietitians of Canada (DC) accredited four-year undergraduate degree in nutrition and an accredited post-graduate internship or combined Master’s degree program. Given the scarcity of internship positions in Ontario, each year approximately two-thirds of the eligible applicants who apply do not receive a position XX, XX, XX, XX, XX, XX, in press). Anecdotally, not securing an internship position is known to be a particularly disconcerting experience that has significant consequences for individuals’ personal, financial, and professional well-being. However, no known empirical research has yet explored students’ experiences of being unsuccessful in applying for internship positions. Fifteen individuals who applied between 2005 and 2009 to an Ontario-based dietetic internship program, but were unsuccessful at least once, participated in a one-on-one semi-structured interview. Findings reveal that participants’ experiences unfold successively in four phases that are characterized by increasingly heightened emotional peril: naïveté, competition, devastation, and frustration. The authors conclude that the current model of dietetic education and training in Ontario causes lasting distress to students and hinders the future growth and vitality of the dietetic profession. Further research is required to understand the impact of the current model on dietetic educators, internship coordinators, and preceptors as coincident participants in the internship application process.


2020 ◽  
Vol 26 (9) ◽  
pp. 1951-1969
Author(s):  
S.A. Chernikova

Subject. The article considers the need to study the financing of investment and innovation processes and creating an effective system of project financing. Objectives. The purpose is to search for new opportunities to enhance the competitive advantages of enterprises of the dairy subcomplex, to ensure their financial stability and steady position in specialized agricultural food-product markets. Methods. The study draws on the theoretical and methodological approach to the impact of project management of innovation and investment activities on improving the efficiency of the project financing system and financial stability of enterprises operating in the dairy subcomplex. Results. The findings show that four levels can be distinguished in the formation and improvement of the system of project financing and the management of innovation and investment activities, depending on the depth of transformation. The principle that provides the integration of the said system with the current model of management of the dairy subcomplex enterprise is defined as a driver. The paper offers a number of levels of the system transformation to gain competitive advantages. Conclusions. I present a mechanism for creating and improving the system of project financing and the management of innovation and investment activities, and a mechanism for interaction of the network of automated information systems, intended to make management decisions, with the automation of information support to innovative solutions.


Minerals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 125
Author(s):  
Mariola Jabłońska ◽  
Janusz Janeczek ◽  
Beata Smieja-Król

For the first time, it is shown that inhaled ambient air-dust particles settled in the human lower respiratory tract induce lung calcification. Chemical and mineral compositions of pulmonary calcium precipitates in the lung right lower-lobe (RLL) tissues of 12 individuals who lived in the Upper Silesia conurbation in Poland and who had died from causes not related to a lung disorder were determined by transmission and scanning electron microscopy. Whereas calcium salts in lungs are usually reported as phosphates, calcium salts precipitated in the studied RLL tissue were almost exclusively carbonates, specifically Mg-calcite and calcite. These constituted 37% of the 1652 mineral particles examined. Mg-calcite predominated in the submicrometer size range, with a MgCO3 content up to 50 mol %. Magnesium plays a significant role in lung mineralization, a fact so far overlooked. The calcium phosphate (hydroxyapatite) content in the studied RLL tissue was negligible. The predominance of carbonates is explained by the increased CO2 fugacity in the RLL. Carbonates enveloped inhaled mineral-dust particles, including uranium-bearing oxides, quartz, aluminosilicates, and metal sulfides. Three possible pathways for the carbonates precipitation on the dust particles are postulated: (1) precipitation of amorphous calcium carbonate (ACC), followed by its transformation to calcite; (2) precipitation of Mg-ACC, followed by its transformation to Mg-calcite; (3) precipitation of Mg-free ACC, causing a localized relative enrichment in Mg ions and subsequent heterogeneous nucleation and crystal growth of Mg-calcite. The actual number of inhaled dust particles may be significantly greater than was observed because of the masking effect of the carbonate coatings. There is no simple correlation between smoking habit and lung calcification.


Fuels ◽  
2021 ◽  
Vol 2 (2) ◽  
pp. 194-209
Author(s):  
Akira Nishimura ◽  
Tomohiro Takada ◽  
Satoshi Ohata ◽  
Mohan Lal Kolhe

Biogas, consisting of CH4 and CO2, is a promising energy source and can be converted into H2 by a dry reforming reaction. In this study, a membrane reactor is adopted to promote the performance of biogas dry reforming. The aim of this study is to investigate the effect of pressure of sweep gas on a biogas dry reforming to get H2. The effect of molar ratio of supplied CH4:CO2 and reaction temperature is also investigated. It is observed that the impact of psweep on concentrations of CH4 and CO2 is small irrespective of reaction temperature. The concentrations of H2 and CO increase with an increase in reaction temperature t. The concentration of H2, at the outlet of the reaction chamber, reduces with a decrease in psweep. It is due to an increase in H2 extraction from the reaction chamber to the sweep chamber. The highest concentration of H2 is obtained in the case of the molar ratio of CH4:CO2 = 1:1. The concentration of CO is the highest in the case of the molar ratio of CH4:CO2 = 1.5:1. The highest sweep effect is obtained at reaction temperature of 500 °C and psweep of 0.045 MPa.


2021 ◽  
Vol 11 (15) ◽  
pp. 6874
Author(s):  
Miroslava Vandličkova ◽  
Iveta Markova ◽  
Katarina Holla ◽  
Stanislava Gašpercová

The paper deals with the selected characteristics, such as moisture, average bulk density, and fraction size, of tropical marblewood dust (Marmaroxylon racemosum) that influence its ignition risk. Research was focused on sieve analysis, granulometric analysis, measurement of moisture level in the dust, and determination of the minimum ignition temperatures of airborne tropical dust and dust layers. Samples were prepared using a Makita 9556CR 1400W grinder and K36 sandpaper for the purpose of selecting the percentages of the various fractions (<63, 63, 71, 100, 200, 315, 500 μm). The samples were sized on an automatic vibratory sieve machine Retsch AS 200. More than 65% of the particles were determined to be under 100 μm. The focus was on microfractions of tropical wood dust (particles with a diameter of ≤100 µm) and on the impact assessment of particle size (particle size <100 µm) on the minimum ignition temperatures of airborne tropical dust and dust layers. The minimum ignition temperature of airborne marblewood dust decreased with the particle size to the level of 400 °C (particle size 63 μm).


2021 ◽  
Vol 11 (11) ◽  
pp. 4934
Author(s):  
Viola Rossano ◽  
Giuliano De Stefano

Computational fluid dynamics was employed to predict the early stages of the aerodynamic breakup of a cylindrical water column, due to the impact of a traveling plane shock wave. The unsteady Reynolds-averaged Navier–Stokes approach was used to simulate the mean turbulent flow in a virtual shock tube device. The compressible flow governing equations were solved by means of a finite volume-based numerical method, where the volume of fluid technique was employed to track the air–water interface on the fixed numerical mesh. The present computational modeling approach for industrial gas dynamics applications was verified by making a comparison with reference experimental and numerical results for the same flow configuration. The engineering analysis of the shock–column interaction was performed in the shear-stripping regime, where an acceptably accurate prediction of the interface deformation was achieved. Both column flattening and sheet shearing at the column equator were correctly reproduced, along with the water body drift.


2018 ◽  
Vol 192 ◽  
pp. 02028
Author(s):  
Hassan Zulkifli Abu ◽  
Ibrahim Aniza ◽  
Mohamad Nor Norazman

Small-scale blast tests were carried out to observe and measure the influence of sandy soil towards explosive blast intensity. The tests were to simulate blast impact imparted by anti-vehicular landmine to a lightweight armoured vehicle (LAV). Time of occurrence of the three phases of detonation phase in soil with respect to upward translation time of the test apparatus were recorded using high-speed video camera. At the same time the target plate acceleration was measured using shock accelerometer. It was observed that target plate deformation took place at early stage of the detonation phase before the apparatus moved vertically upwards. Previous data of acceleration-time history and velocity-time history from air blast detonation were compared. It was observed that effects of soil funnelling on blast wave together with the impact from soil ejecta may have contributed to higher blast intensity that characterized detonation in soil, where detonation in soil demonstrated higher plate velocity compared to what occurred in air blast detonation.


Sign in / Sign up

Export Citation Format

Share Document