Rediscovery of a major alpine thrust : the Helvetic Basal Decollement

2021 ◽  
Author(s):  
Antoine Mercier ◽  
Philippe Hervé Leloup ◽  
Gabriel Courrioux ◽  
Séverine Caritg ◽  
Simon Lopez ◽  
...  
Keyword(s):  
Plate Tectonics ◽  
Sedimentary Cover ◽  
Western Alps ◽  
European Alps ◽  
The North ◽  
Deformation Phase ◽  
Thrust Sheets ◽  
Thrust System ◽  
Lithosphere Deformation ◽  
Natural Laboratory

<p>Since two centuries the European Alps are a natural laboratory to study continental lithosphere deformation during mountain building. Since the early studies, a constant question has been to evaluate the importance of vertical versus horizontal displacements in the building of reliefs. Whilst the occurrence of large thrust sheets, as initially proposed from field observations, are now well explained in the frame of plate tectonics, controversies still arise on the precise geometry, amount, and timing of major thrusting during the orogeny.</p><p>We present a new detailed 3D structural study of the cover/basement relationships in the Chamonix synclinorium in between the Mont-Blanc (MB) and Aiguilles Rouges (AR) ranges. These massifs are two of the main external basement ranges of the western Alps.  The study allows deciphering the area structural history: the Mesozoic sedimentary cover has been thrust at least 10km NW above the Helvetic Basal Décollement (HBD) before to be offset by late steep thrusts during exhumation in the Miocene.</p><p>Such interpretation fundamentally diverges from the classical view of the sedimentary cover of the Chamonix synclinorium being expulsed from a former graben during a single deformation phase and implies that a major thrust phase lasting ~10 Ma has been overlooked. Our observations show that the HBD was a major thrust system active between ~30 and ~20 Ma, possibly until 15 Ma, with a shortening of more than 10km in the south to 20km in the north. It extends below most of the subalpine ranges and emerges in front of the Bauges and within the Chartreuse and Vercors massifs, and was rooted east of the External Cristalline Massifs (Mont-Blanc and Belledonne). During the Miocene, the HBD was cut by steep reverse faults and uplifted above the basement culmination of the External Cristalline Massifs obscuring its continuity and precluding its recognition as a major structure even if it was previously described at several localities.</p>

Subsurface stratigraphy and basin-fill architecture of the late Paleozoic eastern Taos trough, northern New Mexico, U.S.A.

2020 ◽  
Vol 57 (3) ◽  
pp. 149-176
Author(s):  
Nur Uddin Md Khaled Chowdhury ◽  
Dustin E. Sweet
Keyword(s):  
New Mexico ◽  
Sediment Accumulation ◽  
Late Paleozoic ◽  
North Central ◽  
The North ◽  
Basement Rocks ◽  
Basin Geometry ◽  
Deformation Event ◽  
Thrust System ◽  
Basin Fill

The greater Taos trough located in north-central New Mexico represents one of numerous late Paleozoic basins that formed during the Ancestral Rocky Mountains deformation event. The late Paleozoic stratigraphy and basin geometry of the eastern portion of the greater Taos trough, also called the Rainsville trough, is little known because the strata are all in the subsurface. Numerous wells drilled through the late Paleozoic strata provide a scope for investigating subsurface stratigraphy and basin-fill architecture of the Rainsville trough. Lithologic data obtained predominantly from petrophysical well logs combined with available biostratigraphic data from the greater Taos trough allows construction of a chronostratigraphic framework of the basin fill. Isopach- and structure-maps indicate that the sediment depocenter was just east of the El Oro-Rincon uplift and a westerly thickening wedge-shaped basin-fill geometry existed during the Pennsylvanian. These relationships imply that the thrust system on the east side of the Precambrian-cored El Oro-Rincon uplift was active during the Pennsylvanian and segmented the greater Taos trough into the eastern Rainsville trough and the western Taos trough. During the Permian, sediment depocenter(s) shifted more southerly and easterly and strata onlap Precambrian basement rocks of the Sierra Grande uplift to the east and Cimarron arch to the north of the Rainsville trough. Permian strata appear to demonstrate minimal influence by faults that were active during the Pennsylvanian and sediment accumulation occurred both in the basinal area as well as on previous positive-relief highlands. A general Permian decrease in eustatic sea level and cessation of local-fault-controlled subsidence indicates that regional subsidence must have affected the region in the early Permian.

scholarly journals Elevation-induced variations of pollen assemblages in the North-western Alps: An analysis of their value as temperature indicators

2010 ◽  
Vol 333 (11-12) ◽  
pp. 825-835 ◽  
Author(s):  
Elena Ortu ◽  
Stefan Klotz ◽  
Elisabetta Brugiapaglia ◽  
Rosanna Caramiello ◽  
Consolata Siniscalco
Keyword(s):  
Western Alps ◽  
The North ◽  
North Western

scholarly journals Deep structure of the Anapa flexural-rupture zone, Western Caucasus

2019 ◽  
pp. 3-11
Author(s):  
E. A. Rogozhin ◽  
A. V. Gorbatikov ◽  
Yu. V. Kharazova ◽  
M. Yu. Stepanova ◽  
J. Chen ◽  
...  
Keyword(s):  
Deep Structure ◽  
Sedimentary Cover ◽  
Western Caucasus ◽  
Tectonic Structures ◽  
Deep Roots ◽  
Near Surface ◽  
North West ◽  
The North ◽  
Deep Faults ◽  
Tectonic Zones

In the period from 2007 to 2017 complex geological and geophysical studies were carried out in the three largest flexural-rupture fault zones in the North-West Caucasus (Anapa, Akhtyrka and Moldavan). The micro-seismic sounding (MSM) was used as the main geophysical method. Studies with the help of MSM allowed us to identify the features of the deep structure of the earth’s crust in the study area and to associate them with specific tectonic structures on the surface.The binding was carried out by harmonizing the results of the MSM and the parameters of the section of the sedimentary cover and crustal boundaries according to the drilling data and the work previously performed by the reflected wave method (MOVZ). It was found that the Anapa flexure and longitudinal tectonic zones have clear deep roots, and also separate the pericline of the North-Western Caucasus from the Taman Peninsula and from the lowered blocks of the Northern slope of the folded system.Faults in the study area are divided into: (1) deep faults of the Caucasian stretch, penetrating into the lower crust and even to the upper mantle, and (2) near-surface faults, do not extend to the depths beyond the thickness of the sedimentary cover. The seismogenic role of these tectonic disturbances in the studied seismically active region has been determined.

Geodynamics of the France Southeast Basin

2010 ◽  
Vol 181 (6) ◽  
pp. 477-501 ◽  
Author(s):  
Xavier Le Pichon ◽  
Claude Rangin ◽  
Youri Hamon ◽  
Nicolas Loget ◽  
Jin Ying Lin ◽  
...  
Keyword(s):  
Seismic Activity ◽  
Sedimentary Cover ◽  
Central Basin ◽  
The South ◽  
Western Basin ◽  
Active Deformation ◽  
The North ◽  
The Alps ◽  
Sediment Cover ◽  
Surrounding Areas

AbstractWe investigate the geodynamics of the Southeast Basin with the help of maps of the basement and of major sedimentary horizons based on available seismic reflection profiles and drill holes. We also present a study of the seismicity along the Middle Durance fault. The present seismic activity of the SE Basin cannot be attributed to the Africa/Eurasia shortening since spatial geodesy demonstrates that there is no significant motion of Corsica-Sardinia with respect to Eurasia and since gravitational collapse of the Alps has characterized the last few millions years. Our study demonstrates that the basement of this 140 by 200 km Triassic basin has been essentially undeformed since its formation, most probably because of the hardening of the cooling lithosphere after its 50% thinning during the Triassic distension. The regional geodynamics are thus dominated by the interaction of this rigid unit with the surrounding zones of active deformation. The 12 km thick Mesozoic sediment cover includes at its base an up to 4 km thick mostly evaporitic Triassic layer that is hot and consequently highly fluid. The sedimentary cover is thus decoupled from the basement. As a result, the sedimentary cover does not have enough strength to produce reliefs exceeding about 500 to 750 m. That the deformation and seismicity affecting the basin are the results of cover tectonics is confirmed by the fact that seismic activity in the basin only affects the sedimentary cover. Based on our mapping of the structure of the basin, we propose a simple mechanism accounting for the Neogene deformation of the sedimentary cover. The formation of the higher Alps has first resulted to the north in the shortening of the Diois-Baronnies sedimentary cover that elevated the top of Jurassic horizons by about 4 km with respect to surrounding areas to the south and west. There was thus passage from a brittle-ductile basement decollement within the higher Alps to an evaporitic decollement within the Diois-Baronnies. This shortening and consequent elevation finally induced the southward motion of the basin cover south of the Lure mountain during and after the Middle Miocene. This southward motion was absorbed by the formation of the Luberon and Trévaresse mountains to the south. To the east of the Durance fault, there is no large sediment cover. The seismicity there, is related to the absorption of the Alps collapse within the basement itself. To the west of the Salon-Cavaillon fault, on the other hand, gravity induces a NNE motion of the sedimentary cover with extension to the south and shortening to the north near Mont Ventoux. When considering the seismicity of this area, it is thus important to distinguish between the western Basin panel, west of the Salon-Cavaillon fault affected by very slow NNE gliding of the sedimentary cover, with extension to the south and shortening to the north; the central Basin panel west of the Durance fault with S gliding of the sedimentary cover and increasing shortening to the south; and finally the basement panel east of the Durance fault with intrabasement absorption of the Alps collapse through strike-slip and thrust faults.

Miocene to Messinian deformation and hydrothermal activity in a pre-Alpine basement massif of the French western Alps: new U-Th-Pb and argon ages from the Lauzière massif

2010 ◽  
Vol 181 (3) ◽  
pp. 227-241 ◽  
Author(s):  
Dominique Gasquet ◽  
Jean-Michel Bertrand ◽  
Jean-Louis Paquette ◽  
Jérémie Lehmann ◽  
Gueorgui Ratzov ◽  
...  
Keyword(s):  
Late Miocene ◽  
Shear Zones ◽  
Hydrothermal Activity ◽  
Western Alps ◽  
Strike Slip ◽  
Quartz Veins ◽  
The North ◽  
Slip Regime ◽  
Tectonically Active ◽  
Dextral Strike Slip

Abstract U-Pb and Th-Pb dating of monazite from hydrothermal quartz veins (“Alpine veins”) from the Lauzière massif (North Belledonne) together with Ar/Ar ages of adularias from the same veins constrain the age of the last tectono-metamorphic events that affected the External Crystalline Massifs (ECM). Ages obtained are surprisingly young. The study of the structural context of the veins combined with our chronological data, allow us to propose a tectonic scenario of the northern ECM for the 15-5 Ma period, which was poorly documented so far. The quartz veins are of two types: (i) the oldest are poorly mineralized (chlorite and epidote), flat-lying veins. The quartz fibres (= extension direction) are near vertical and seem to be associated with a subvertical dissolution schistosity superimposed upon an early Alpine deformation underlined by “mini-biotite”. They bear a sub-horizontal stretching lineation; (ii) the youngest veins are very rich in various minerals (anatase, rutile, phénacite, meneghinite, beryl, synchysite, ….). They are almost vertical. Their “en echelon” geometry as well as the horizontal attitude of their quartz fibres show a dextral strike-slip regime. Two groups of Th-Pb ages have been obtained: 11 to 10 Ma and 7 to 5 Ma. They were obtained from the most recent veins (vertical veins) sampled in different areas of the massif. The ca. 10 Ma ages are related to veins in the Lauzière granite and its metamorphic country-rocks at about 2 km from the eastern contact of the massif, while the ages of ca. 5 Ma correspond to veins occurring in mylonites along this contact. Adularias provided Ar/Ar ages at ca. 7 Ma. By contrast, a monazite from a vein of the Pelvoux massif (Plan du Lac) yielded a Th-Pb age of 17.6 Ma but in a different structural setting. Except fission track ages, there are very little ages of this range published in the recent literature on the Alps. The latter concern always gold mineralized veins (NE Mont Blanc and SW Lepontine dome). The last compressive tectonic regime dated between 15 and 12 Ma is coeval with (i) the late “Roselend thrust” event, which is recorded in the Mont Blanc by shear-zones with vertical lineation, (ii) the last movements in the basal mylonites of the Swiss Nappes, (iii) the horizontal Alpine veins from the Mont Blanc and Belledonne massifs (with vertical quartz fibres), which are similar to the early veins of the Lauzière. On the contrary, the vertical veins of the Lauzière, dated between 11 and 5 Ma, correspond to a dextral strike slip regime. This suggests that most of the strike-slip tectonics along the ECM took place during two stages (ca. 10 Ma and ca. 7-5 Ma) and not only at 18 Ma as had been proposed previously. Our ages are consistent with the late Miocene-Pliocene overlap of the Digne thrust to the South and to part of the normal movement along the Simplon fault to the North. Thus, all the external crystalline massifs were tectonically active during the late Miocene. This suggests that tectonic events in the external alpine belt may have contributed to some extent to the geodynamical causes of the Messinian crisis.

Rift inheritance controls the switch from thin- to thick-skinned thrusting and basal décollement re-localization at the subduction-to-collision transition

2021 ◽  
Author(s):  
Stefano Tavani ◽  
Pablo Granado ◽  
Amerigo Corradetti ◽  
Giovanni Camanni ◽  
Gianluca Vignaroli ◽  
...  
Keyword(s):  
Sedimentary Cover ◽  
Complete Removal ◽  
Lower Plate ◽  
Accretionary Wedge ◽  
Convergent Margins ◽  
Middle Crust ◽  
Rifted Margins ◽  
Thrust System ◽  
Structural Levels ◽  
Rifted Margin

In accretionary convergent margins, the subduction interface is formed by a lower plate décollement above which sediments are scraped off and incorporated into the accretionary wedge. During subduction, the basal décollement is typically located within or at the base of the sedimentary pile. However, the transition to collision implies the accretion of the lower plate continental crust and deformation of its inherited rifted margin architecture. During this stage, the basal décollement may remain confined to shallow structural levels as during subduction or re-localize into the lower plate middle-lower crust. Modes and timing of such re-localization are still poorly understood. We present cases from the Zagros, Apennines, Oman, and Taiwan belts, all of which involve a former rifted margin and point to a marked influence of inherited rift-related structures on the décollement re-localization. A deep décollement level occurs in the outer sectors of all of these belts, i.e., in the zone involving the proximal domain of pre-orogenic rift systems. Older—and shallower—décollement levels are preserved in the upper and inner zones of the tectonic pile, which include the base of the sedimentary cover of the distal portions of the former rifted margins. We propose that thinning of the ductile middle crust in the necking domains during rifting, and its complete removal in the hyperextended domains, hampered the development of deep-seated décollements during the inception of shortening. Progressive orogenic involvement of the proximal rift domains, where the ductile middle crust was preserved upon rifting, favors its reactivation as a décollement in the frontal portion of the thrust system. Such décollement eventually links to the main subduction interface, favoring underplating and the upward motion of internal metamorphic units, leading to their final emplacement onto the previously developed tectonic stack.

Sign in / Sign up

Export Citation Format

Share Document